VPB30W8M9900A1/AA

VPB22W8M6200A1 RUKO | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

Catalog C-031 Rev. H Average power contact resistance is less than 0.001 ohms Average signal contact resistance is less than 0.005 ohms RoHS compliant FEATURESFEATURES an Amphenol company

• The Leader in Power Connector Solutions for PICMG Applications AdvancedTCA®
• Dedicated Zone 1 power interface for plug-in cards
• Closed entry female contacts for ruggedized applications
• Heavy gold contact options
• Available from stock at www.posishop.com Compact PCI® P47 version for CompactPCI applications • Features include AC/DC power input, power output at various voltages and signal controls • Five package sizes available • Closed entry female contacts for ruggged applications • Heavy gold plated contact options • Widest variety of gender / termination combinations in the marketplace • MicroTCA (µTCA)®
• Compliant to MTCA.0, MTCA.1 & MTCA.3 specifications
• High reliability, precision machined contacts
• Low contact resistance
• Minimized height above printed circuit board
• Single and dual port configurations
• Power contacts carry 50 amps minimum at a 30°C temperature rise (prior to derating) PICMG 3.8 Compliant to PICMG 3.8 requirements • Intended for power and system management use • Blind mating capability • 19.8 mm wide • For nearly two decades, Positronic has been a leading edge power connector manufacturer for PICMG technology-based applications such as AdvancedTCA®, CompactPCI®, MicroTCA®, and PICMG 3.8. Despite copy cat products, Positronic continues to offer the broadest selection of power connectors for these applications. Visit www.connectpositronic.com for more details. an Amphenol company

www.connectpositronic.com 3 DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. www.advancedtca.com www.picmg.com PICMG and the PICMG logo and/or Advanced TCA ® and the Advanced TCA® logo are registered trademarks of the PCI Industrial Computers Manufacturers Group About the cover: For more information about the products shown on the front cover, visit the following web sites:

• Rittal backplane (top left) http://www.rittal-corp.com
• Diversified Technology, Inc ATS1160 (middle left) http://www.dtims.com
• F9 Systems, Inc. AdvancedTCA Thermal Blade™ (bottom left) http://www.f9-systems.com
• GE Fanuc Embedded Systems AT4-AMC-1 carrier blade (bottom left) http://www.gefanucembedded.com Products described within this catalog may be protected by one or more of the following US patents: †Patented in Canada, 1992 Other Patents Pendin g Information in this catalog is proprietary to Positronic and its subsidiaries. Positronic believes the data contained herein to be reliable. Since the technical information is given free of charge, the user employs such information at his own discretion and risk. Positronic Industries assumes no responsibility for results obtained or damages incurred from use of such information in whole or in part. The following trademarks are registered to Positronic Industries, Inc. in the United States and many other countries: Positronic Industries, Inc.®, Positronic®, Connector Excellence®, P+ logo®, PosiBand®, PosiShop®, Positronic Global Connector Solutions®, Global Connector Solutions®. The color blue as it appears on various connectors is a trademark of Positronic Industries, Inc., Registered in U.S. Patent and Trademark Office. Plug-in boards used in today’s computing platforms must provide higher reliability, greater functionality and require more power than ever before. Many next generation platforms deliver bulk voltage to boards. DC to DC converters are used to supply the various voltage requirements on the board. This allows systems to adapt as semiconductor voltages change. The VPB Series was developed as a dedicated interface between backplanes and boards. The connector is capable of providing dual redundant power, system management and high voltage auxiliary circuits to each slot within the platform. The connector’s outstanding blind mating capability can be used to align the board during insertion. The VPB Series is compliant to PICMG 3.0, AdvancedTCA ®, Zone 1 connector requirements . Visit our web site for the latest catalog updates and supplements at http://www.connectpositronic.com/catalogs/ POSITRONIC® IS AN ITAR REGISTERED COMPANY Positronic Industries’ FEDERAL SUPPLY CODE (Cage Code) FOR MANUFACTURERS is 28198

Zone 1 backplane connectors must survive sizzle fault

• Conditions: IEC 60512-3, Test 10d
• The mated set of connectors (specimens) shall be comprised of a Front Board connector with right angle (90°) press-in terminations and a backplane connector having press-in terminations
• Standard atmospheric conditions
• Ambient temperature shall be 55 degrees C
• Contact positions 28 and 33 shall be energized at 10 amperes through a circuit path sized to simulate a standard PICMG 3.0 frontboard/backplane
• Contact positions 29 and 34 shall be energized at 50 amperes through a circuit path sized to simulate a standard PICMG 3.0 frontboard/backplane
• There shall be a one hour stabilization time after test set up
• Test time shall be four hours after one hour stabilization period
• After completion of test, connectors shall be immediately uncoupled
• Requirements after test conditioning:
• Visual inspection of backplane connector shall show no defect that would impair normal operation
• After backplane connectors are allowed to cool to room ambient temperature the connectors shall be mated to fresh Front Board connectors that have right angle (90°) press-in termina - Positronic’s VPB series meets the requirements of this test! FRONT BOARD Backplane (relatively high) overcurrent protection BACKPLANE ZONE 1 CONNECTORS High resistance “sizzle fault ” short Front board (relatively low) overcurrent protection A high resistance short between a front board’s overcurrent protection and the “SIZZLE FAULT” A high resistance short between a front board’s overcurrent protection and the backplane’s overcurrent protection could allow high currents to be drawn through the Zone 1 Power Connector indefinitely. These cur - rents could reach a value that is slightly less than the overcurrent protec - tion for the entire back - plane. DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. www.connectpositronic.com

Energy is essential to everyone. Often we do not give thought to where energy comes from or how much we consume until energy is not readily available. Energy has become an area of focus for governments, private industry, and citizens. Enhanced methods of producing energy from traditional sources, development of new energy sources and conservation of energy from all sources have become more crucial than ever before. Across the world, the electronic equipment that we all rely upon in our daily lives consumes a vast amount of energy. An unavoidable waste of energy occurs when power is distributed throughout electronic equipment. As electrical current flows through conductors and connectors, unwanted heat is generated in proportion to the amount of electrical resistance encountered. Lowering resistance in connector contacts and conductors will reduce the amount of heat generated, and result in less wasted energy. Additional energy will be saved, as cooling systems will have less heat to draw out of the equipment. In the past, the primary metric for power connectors has been contact current ratings. In the future, contact resistance may become equally important. While it is true that contact resistance and contact current ratings are closely associated, contact current ratings cannot be used to quantify the energy consumed by contacts. Current ratings are based on the temperature rise of a connector or contact at a specific current level. A connector design or test method allowing relatively rapid heat dissipation may yield a reasonable temperature rise, while a relatively high amount of energy is still being wasted. Within the connector industry, there are a variety of test methods used to quantify a particular performance metric. Different test methods can yield different values for the same metric. This lack of uniformity can be confusing to connector users who are trying to compare connectors offered by various manufacturers. Third party assessment can give connector users a common point of reference when making connector choices. Assessors use contact resistance as the metric to determine the relative efficiency of connector contacts. These assessments verify the claims made by manufacturers. Once the assessment is made, the assessor issues a statement that will aid power connector users in evaluating contact efficiency as it relates to energy consumption. As an example, the Positronic VPB series size 16-power contacts recently underwent evaluation. The contact resistance was found to be less than one milliohm each. This low contact resistance is achieved by use of high conductivity contact materials. In addition, Positronic’s Large Surface Area (LSA) contact system is utilized as the interface between male and female power contacts in VPB series connectors. The VPB series was designed for use as the Zone 1 power connector in AdvancedTCA (ATCA) telecommunication computing systems. Zone 1 connectors provide power from backplanes to front boards in ATCA chassis. The low contact resistance of Positronic’s VPB series provides energy savings opportunities in any application using this connector. The following formula verifies the energy savings of a lower resistance contact at a given current: Power Consumption (Watts) = Current Flow 2 (Amperes2) X Contact Resistance (Ohms). Contact resistance has a one-to-one effect on power consumption. If, the contact resistance is reduced by half, the power consumption is reduced by half. Low resistance power contacts also provide benefits in systems sensitive to voltage drop. This is demonstrated in the following formula: Voltage drop across contact pairs = Current Flow (Amperes) X Contact Resistance (Ohms). Once again, contact resistance has a one-to-one effect. Reducing the contact resistance by half reduces voltage drop by half. Higher energy costs and government legislation will cause energy conservation efforts to continue to intensify. If we consider the vast numbers of power contacts in electronic equipment around the world, it is clear how lower contact resistance can play a role in meeting energy conservation goals. Positronic utilizes high conductivity contact materials and unique contact interfaces to provide low contact resistance in our power connector products. To learn more about these products, visit connectpositronic.com. www.connectpositronic.com 5 DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. VPB FEATURES Positronic’s Blue Connectors are Green Average power contact resistance is less than 0.001 ohms Average signal contact resistance is less than 0.005 ohms RoHS compliant FEATURESFEATURES

VPB SERIES TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: Connector Insert: Glass-filled polyester, UL 94V-0, blue color. Contacts: Precision-machined copper alloy with gold flash over nickel plate. Other finishes available upon request. Size 22 female precision-stamped and formed press-fit contacts are available, contact Technical Sales. MECHANICAL CHARACTERISTICS: Blind Mating System: Male and female connector bodies provide “lead-in” for 2.0 mm [0.078 inch] diametral misalignment. Polarization: Provided by connector body design. Fixed Contacts: Printed board mount terminations, both straight and right angle (90°). Size 16 female contacts feature “Closed Entry” design. Size 22 female contacts feature rugged open entry design. “PosiBand” closed entry contacts are optional. Fixed Contact Retention in Connector Body: Size 16 Contacts: 31 N [7 lbs.] Size 22 Contacts: 25 N [5 lbs.] Sequential Contact First mate contacts 25, 26, 28 29, Mating System: 30 and 31. Second mate contact 33. Third mate contact 34. Contacts 1-24 mate before 27 and 32. Last mate contacts 27 and 32. Power to be enabled through a last mate contact within VPB Series or another connector. Consult Technical Sales for customer specified sequential mating. Printed Board Mounting: Mounting holes provided in connector body for printed board. Self-tapping screws are available, see ordering information page. Mechanical Operations: 250 couplings, minimum. ELECTRICAL CHARACTERISTICS: Contact Current Ratings, See temperature rise curve per UL 1977: on page 9 for details. Size 16 Power Contacts: 30 amperes continuous, all contacts under load. Size 22 Signal Contacts: 2 amperes nominal rating. Current Overload Test Tested per PICMG 3.0, R3.0 Section B.4.2.4, see page 4 for more information. Initial Contact Resistance: Termination to termination: Size 16 Contacts: Average resistance is less than 0.001 ohms. Tested per IEC 60512- 2, Test 2a. Compliant to PICMG 3.0, R3.0 requirements of 0.0022 ohms maximum. Tested per IEC 60512- 2, Test 2b. Size 22 Contacts: Average resistance is less than 0.005 ohms. Tested per IEC 60512-2, Test 2a. Compliant to PICMG 3.0, R3.0 requirements of 0.0085 ohms maximum. Tested per IEC 60512- 2, Test 2a. Insulation Resistance: 5 G ohms per IEC 60512-2, Test 3a. Voltage Proof: Contacts 1-16: 1,000 V r.m.s. Contacts 17-34: 2,000 V r.m.s. Creepage and Clearance Distance; minimum: Contact positions 1-16 to any other contact within this group: 0.7mm [0.028 inch] Contact positions17-24 to any other contact within this group: 2.5mm [0.098 inch] Contact positions 25-34 to any other contact within this group: 1.4mm [0.055 inch] Contact positions 13-16 to 17-20: 3.0mm [0.118 inch] Contact positions 21-24 to 25, 26: 4.0mm [0.157 inch] Contact positions 25, 26 to 27-29: 2.0mm [0.079 inch] CLIMATIC CHARACTERISTICS: Working Temperature: -55˚C to +125˚C. 37.10 [1.461]PIN 27 MATING DIMENSIONS Right Angle (90°) Board Mount Male to Straight Board Mount Female (FULLY MATED) 1 mm [0.039 inch] separation allowed DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. www.connectpositronic.com UL and C.N.R. Recognized File #E49351

www.connectpositronic.com 7 DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. Typical Part Numbers VPB30W8M6200*1/AA FEMALE CONNECTOR WITH STRAIGHT COMPLIANT PRESS-FIT PRINTED BOARD MOUNT TERMINATIONS CODE 93 21.33 [0.839] MAX. CONTACT HOLE PATTERN CONTACT HOLE PATTERN NOTE: See page 9 for suggested printed board hole sizes. NOTE: See page 9 for suggested printed board hole sizes. VPB30W8M6200A1/AA shown for reference. Positions 1-4 are not populated with contacts. VPB30W8F9300A1/AA shown for reference . Positions 1-4 are not populated with contacts. MALE CONNECTOR WITH RIGHT ANGLE (90°) COMPLIANT PRESS-FIT PRINTED BOARD MOUNT TERMINATIONS CODE 62 Typical Part Numbers VPB30W8F9300*1/AA VPB30W8S9300*1/AA NOTE: *1 Indicates contact plating options for connectors. See Step 7 of ordering information on page 10. NOTE: *1 Indicates contact plating options for connectors. See Step 7 of ordering information on page 10.

A 21.33 [0.839] MAX. 8X ø1.14 [0.045] 26X ø0.61 [0.024] VPB30W8M400A1/AA shown for reference. Positions 1-4 are not populated with contacts. VPB30W8F400A1/AA-394.0 shown for reference. Positions 1-4 are not populated with contacts. Typical Part Numbers VPB30W8M400*1/AA NOTE: *1 Indicates contact plating options for connectors. See Step 7 of ordering information on page 10. NOTE: *1 Indicates contact plating options for connectors. See Step 7 of ordering information on page 10. MALE CONNECTOR WITH RIGHT ANGLE (90º) SOLDER PRINTED BOARD MOUNT TERMINATIONS CODE 4 FEMALE CONNECTOR WITH RIGHT ANGLE (90°) SOLDER PRINTED BOARD MOUNT TERMINATIONS CODE 4 WITH -394.0 MOS This connector option is offered to support extender cards. Consult Technical Sales for higher volume requirements. CODE A 4 2.68 [0.106] 42 4.09 [0.161] DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. www.connectpositronic.com Typical Part Numbers VPB30W8F400*1/AA-394.0 VPB30W8S400*1/AA-394.0

NOTE: For PCB plating compositions not shown, consult Technical Sales. COMPLIANT PRESS-FIT CONTACT HOLE CONTACT POSITION FUNCTION 1-16 Low Speed Hardware Management 17-24 High Voltage Metallic Test and Ringing Generator Signals

25 Shelf Ground

26 Logic Ground

27/32 Enables for A and B power

28 A Return

29 B Return

30 A Early

31 B Early

33 A Voltage

34 B Voltage

Above curve developed using VPB30W8M6200A1 and VPB30W8F9300A1 connectors. CURVE A - ALL SIZE 16 POWER CONTACT UNDER LOAD, SIGNAL CONTACTS 1-24 UNDER 1 AMP LOAD CURVE B - SIZE 16 POWER CONTACT POSITIONS 28, 33 UNDER LOAD, SIGNAL CONTACTS 1-24 UNDER 1 AMP LOAD 0 5 10 15 20 25 TEMPERATURE RISE CURVE SIZE 16 CONTACT CURRENT LOAD TEMPERATURE RISE (ºC) SUGGESTED PRINTED BOARD HOLE SIZES FOR COMPLIANT PRESS-FIT CONNECTORS “Bi-Spring” Termination utilized on power contacts OMEGA & BI-SPRING COMPLIANT PRESS-FIT CONTACT HOLE BOARD TYPE CONTACT SIZE RECOMMENDED DRILL HOLE SIZE RECOMMENDED PLATING FINISHED HOLE SIZES TIN-LEAD SOLDER PCB OMEGA ø1.150±0.025 [ø0.0453±0.0010] 15µ [0.0006] minimum solder over 25µ [0.0010] min. copper ø1.000+0.090-0.060 BI-SPRING ø1.750±0.025 [ø0.069±0.001] ø1.600+0.090-0.060 RoHS PRINTED CIRCUIT BOARD (PCB) PLATING OPTIONS COPPER PCB OMEGA ø1.19±0.025 [ø0.047±0.001] 25µ [0.0010] min. copper ø1.09±0.05 [ø0.043±0.002] BI-SPRING ø1.750±0.025 [ø0.069±0.001] ø1.600+0.090-0.060 IMMERSION TIN PCB OMEGA ø1.19±0.025 immersion tin over 25µ [0.0010] min. copper ø1.09±0.05 [ø0.043±0.002] BI-SPRING ø1.750±0.025 [ø0.069±0.001] ø1.600+0.090-0.060 IMMERSION SILVER PCB OMEGA ø1.19±0.025 immersion silver over 25µ [0.0010] min. copper ø1.09±0.05 [ø0.043±0.002] BI-SPRING ø1.750±0.025 [ø0.069±0.001] ø1.600+0.090-0.060 ELECTROLESS NICKEL/ IMMERSION GOLD PCB OMEGA ø1.19±0.025 [ø0.047±0.001] 0.05µ [0.000002] min. immersion gold over electroless nickel per IPC-4552 over 25µ [0.0010] min. copper ø1.09±0.05 [ø0.043±0.002] BI-SPRING ø1.750±0.025 [ø0.069±0.001] ø1.600+0.090-0.060 www.connectpositronic.com 9 DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. Traditionally, tin-lead has been a popular plating for printed circuit board (PCB) holes. However, many PCB hole platings must now be RoHS compliant. Positronic is pleased to offer PCB HOLE SIZES FOR RoHS PCB platings as shown below. “Omega” Termination utilized on signal contacts

ORDERING INFORMATION – CODE NUMBERING SYSTEM Specify Complete Connector By Selecting an Option From Steps 1 Through 8 STEP 1 - BASIC SERIES VPB - VP Series STEP 8 - ENVIRONMENTAL COMPLIANCE OPTIONS /AA - RoHS compliant STEP 9 - SPECIAL OPTIONS 394.0- Allows for female contact right angle (90º) solder mount. CONTACT TECHNICAL SALES FOR SPECIAL OPTIONSSTEP 2 - CONNECTOR VARIANTS *1 30W8 - Contact positions 1-4 are not populated. Standard variant for AdvancedTCA® backplanes. Standard option for frontboards. *1 22W8 - Contact positions 1-4 and 17-24 are not populated. Standard cost saving option for AdvancedTCA® frontboards. STEP 3 - CONNECTOR GENDER M - Male *2 F - Female - Professional Level *2 S - Female - Industrial/Military Level STEP 4 - CONTACT TERMINATION TYPE 4 - Right Angle (90º) Board Mount, Solder, termination length 2.68 [0.106] (30W8 female requires MOS 394.0, contact Technical Sales for 22W8 female MOS part number) 42- Right Angle (90º) Board Mount, Solder, termination length 4.09 [0.161]. 62 - Right Angle (90º) Board Mount, Press-fit. Male only 93 - Straight Board Mount, Press-fit. Female only. 99 - Straight Board Mount, Press-fit, Size 22 stamped and formed contacts. Female “F” variant only (Step 3). Contact Technical Sales. STEP EXAMPLE STEP 5 0 - None STEP 6 0 - None STEP 7 - CONTACT PLATING (choose plating based on end use requirements) A1 - Gold flash over nickel on mating end and termination end. A2 - Gold flash over nickel on mating end and 5.00µ [0.00020 inch] tin-lead solder coat on termination end. Not available with code 62 or 93 in step 4. C1 - 0.76µ [0.000030 inch] gold over nickel on mating end and termination end. C2 - 0.76µ [0.000030 inch] gold over nickel on mating end and 5.00µ [0.00020 inch] tin-lead solder coated termination end. Not available with code 62 or 93 in step 4. D1 - 1.27µ [0.000050 inch] gold over nickel on mating end and termination end. D2 - 1.27µ [0.000050 inch] gold over nickel on mating end and 5.00µ [0.00020 inch] tin-lead solder coated termination end. Not available with code 62 or 93 in step 4.

• The use of a support tool when installing press-fit connectors is recommended. For female connectors use 9513-400-6-41, for male connectors use 9513-400-8-41.
• Female compliant press-fit connectors require a press-fit tool, part number 9513-308-1-41, for installation. MOUNTING SCREWS Install Screw to a Depth of: 3.50 [0.138] Minimum 5.00 [0.197] Maximum Contact technical sales for RoHS compliant mounting screw information. 1 2 3 4 5 6 7 8 VPB 30W8 F 93 0 0 A1 /AA -394.0 STEEL SCREW PART NUMBER STAINLESS STEEL SCREW PART NUMBER THREAD LENGTH Unless otherwise specified, dimensional tolerances are: 1) ±0.13 mm [0.005 inches] for all diameters. 2) ±0.38 mm [0.015 inches] for all other dimensions. Notes VPB series can be supplied with contacts populated in all 34 positions. Use part number VPB34W8*****. *2 Female signal contacts are offered in open and closed entry. Closed entry contacts are designed with an unbroken ring at the open - ing of the contact. This closed entry feature provides higher reliability in environments experiencing higher levels of shock and vibration . Closed entry contacts are also more abuse resistant than open entry designs. VPB Power contacts are always closed entry design. Telecordia GR1217 shows a preference that press-fit connectors use auxiliary mounting hardware. Also, the AdvancedTCA® Zone 1 connector serves as the lower alignment feature for front boards. Therefore, the use of mounting hardware is recommended. However, VPB connectors have been tested may guide connector users to omit use of screws. Contact Positronic for test details. DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. www.connectpositronic.com Note: This step should be included to create a standard part number. Example: VPB30W8F9300A1/AA

DIMENSIONS ARE IN MILLIMETERS [INCHES]. ALL DIMENSIONS ARE SUBJECT TO CHANGE.

Positronic | Americas

1325 N Eldon Ave +1 800 641 4054

Springfi eld MO 65803 USA info@connectpositronic.com Positronic | Europe Z.I. d’Engachies 46, route d’Engachies +33 5 6263 4491 F-32020 Auch Cedex 9 France contact@connectpositronic.com Positronic | Asia 3014A Ubi RD 1 #07-01 +65 6842 1419 Singapore 408703 singapore@connectpositronic.com Sales Offices Positronic has local sales representation all over the world. To find the nearest sales office, please visit www.connectpositronic.com/locations an Amphenol company