VO0631-X001T

VO0600T_12 VISHAY | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T www.vishay.com Vishay Semiconductors Rev. 2.0, 25-Oct-12 1 Document Number: 84607 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 High Speed Optocoupler, 10 MBd, SOIC-8 Package

DESCRIPTION

The VO06xxT family are single and dual channel 10 MBd optocoupler utilizing a high efficient input LED coupled with an integrated optical photodio de IC detector. The detector has an open drain NMOS-trans ister output, providing less leakage compared to an open collector Schottky clamped transister output. For the single channel type, an enable function on pin 7 allows the de tector to be strobed. The internal shield provides a guaranteed common mode transient immunity of 5 kV/μs for the VO0601T and VO0631T and 15 kV/μs for the VO0611T and VO0661T. The use of a 0.1 μF bypass capacitor connected between pin 5 and 8 is recommended. AGENCY APPROVALS

• UL1577, file no. E52744
• cUL-file no. E52744, equivalent to CSA bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1

FEATURES

• Choice of CMR perfo rmance of 15 kV/μs, 5 kV/μs, and 1 kV/μs
• High speed: 10 MBd typical
• + 5 V CMOS compatibility
• Pure tin leads
• Guaranteed AC and DC performance over temperature: - 40 °C to + 100 °C temp. range
• Meets IEC 60068-2-42 (SO 2) and IEC 60068-2-43 (H 2S) requirements
• Low input current capability: 5 mA
• Material categorization: For definitions of compliance please see www.vishay.com/doc?99912

APPLICATIONS

• Microprocessor system M interface
• PLC, ATE input/output isolation
• Computer peripheral interface: SPI
• Digital fieldbus isolation: CC-Link, DeviceNet, profibus, SDS
• High speed A/D and D/A conversion
• AC plasma display panel level shifting
• Multiplexed data transmission
• Digital control power supply
• Ground loop elimination 18921-26 NC A C NC VCC VE VO GND VCC VO1 VO2 GND Single channel Dual channel VO0600T, VO0601T, VO0611T VO0630T, VO0631T, VO0661T VDE 18921-17

ORDERING INFORMATION

V O06##-X001 T PART NUMBER PACKAGE OPTION TAPE AND REEL AGENCY CERTIFIED/PACKAGE

1 CHANNEL 2 CHANNELS

CMR (kV/μs) CMR (kV/μs) UL, cUL 1 5 15 1 5 15 SOIC-8 VO0600T VO0601T VO0611T VO0630T VO0631T VO0661T UL, cUL, VDE 1 5 15 1 5 15 SOIC-8 - VO0601-X001T - - VO0631-X001T - SIOC-8 6.1 mm

VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T www.vishay.com Vishay Semiconductors Rev. 2.0, 25-Oct-12 2 Document Number: 84607 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) Only applicable for single channel devices Notes

• Stresses in excess of the abso lute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those give n in the operational sections of this document. Exposure to abs olute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices. TRUTH TABLE (positive logic) LED ENABLE (1) OUTPUT On H L Off H H On L H Off L H On NC L Off NC H ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Average forward current (single channel) I F 20 mA Average forward current (dual channel) I F 15 mA Reverse input voltage V R 5V Enable input voltage (single channel) V E VCC + 0.5 V V Enable input current (single channel) I E 5m A Surge current t = 100 μs I FSM 200 mA Output power dissipation (single channel) P diss 35 mW Output power dissipation (per channel for dual channel) Pdiss 25 mW OUTPUT Supply voltage 1 min maximum V CC 7V Output current I O 50 mA Output voltage V O 7V Output power dissipation (single channel) P diss 85 mW Output power dissipation (per channel for dual channel) Pdiss 60 mW COUPLER Isolation test voltage t = 1 s V ISO 4000 V RMS Storage temperature T stg - 55 to + 150 °C Operating temperature T amb - 40 to + 100 °C Lead solder temperature for 10 s 260 °C Solder reflow temperature (1) for 1 min 260 °C RECOMMENDED OPERATING CONDITION PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Operating temperature T amb - 40 100 °C Supply voltage V CC 4.5 5.5 V Input current low level I FL 0 250 μA Input current high level I FH 51 5 m A Output pull up resistor R L 330 4K Ω Logic high enable voltage V EH 2V CC V Logic low enable voltage V EL 0.0 0.8 V Fanout R L = 1 kΩ N5 -

VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T www.vishay.com Vishay Semiconductors Rev. 2.0, 25-Oct-12 3 Document Number: 84607 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

• Minimum and maximum values are testing requirements. Typical valu es are characteristics of the device and are the result of en gineering evaluation. Typical values are for information only and are not part of the testing requirements. Note
• Over recommended temperature (T A = - 40 °C to + 100 °C), VCC = 5 V, IF = 7.5 mA unless otherwise specified. All typicals at TA = 25 °C, VCC = 5 V. ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT Input forward voltage I F = 10 mA V F 1.1 1.4 1.7 V Reverse current V R = 5 V I R 0.01 10 μA Input capacitance f = 1 MHz, V F = 0 V C I 55 pF OUTPUT High level supply current (single channel) V E = 0.5 V, IF = 0 mA I CCH 4.1 7 mA VE = VCC, IF = 0 mA I CCH 3.3 6 mA High level supply current (dual channel) I F = 10 mA I CCH 6.5 12 mA Low level supply current (single channel) VE = 0.5 V, IF = 10 mA I CCL 47 m A VE = VCC, IF = 10 mA I CCL 3.3 6 mA Low level supply current (dual channel) I F = 10 mA I CCL 6.5 12 mA High level output current VE = 2 V, VO = 5.5 V, IF = 250 μA IOH 0.002 1 μA Low level output voltage VE = 2 V, IF = 5 mA, IOL (sinking) = 13 mA VOL 0.2 0.6 V Input threshold current VE = 2 V, VO = 5.5 V, IOL (sinking) = 13 mA ITH 2.4 5 mA High level enable current I EH - 0.6 - 1.6 mA Low level enable current I EL - 0.8 - 1.6 mA High level enable voltage V EH 2V Low level enable voltage V EL 0.8 V SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Propagation delay time to high output level R L = 350 Ω, CL = 15 pF t PLH 20 48 100 ns Propagation delay time to low output level R L = 350 Ω, CL = 15 pF t PHL 25 50 100 ns Pulse width distortion R L = 350 Ω, CL = 15 pF |t PHL - tPLH| 2.9 35 ns Propagation delay skew R L = 350 Ω, CL = 15 pF t PSK 84 0 n s Output rise time (10 to 90 %) R L = 350 Ω, CL = 15 pF t r 23 ns Output fall time (90 to 10 %) R L = 350 Ω, CL = 15 pF t f 7n s Propagation delay time of enable from VEH to VEL RL = 350 Ω, CL = 15 pF, VEL = 0 V, VEH = 3 V tELH 12 ns Propagation delay time of enable from VEL to VEH RL = 350 Ω, CL = 15 pF, VEL = 0 V, VEH = 3 V tEHL 11 ns

VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T www.vishay.com Vishay Semiconductors Rev. 2.0, 25-Oct-12 4 Document Number: 84607 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 1 - Single Channel Test Circuit for tPLH, tPHL, tr and tf Fig. 2 - Dual Channel Test Circuit for tPLH, tPHL, tr and tf Fig. 3 - Single Channel Test Circuit for tEHL, tELH 18964-2The probe and Jig capacitances are included in C Input I F Output V O I F 0 mA V OL 1.5 V tPHL tPLH V OH C = 15 pFGND 0.1 µF bypass VCC VOUT V CC I F R R L Inpu tI F monitoring node Output V O monitoring node L Single channel Pulse gen. Z = 50 Ω t= t = 5 ns o f r M L = 7.5 mA I F = 3.75 mA VE Pulse gen. Z = 50 Ω t= t = 5 ns o f r Input monitoring node Output V monitoring node O I F RM R L C L = 15 PF 0.1 µF bypass 18963-3 V CC 18975-2The probe and Jig capacitances are included in C Inpu tV E Output V O t EHL t ELH C = 15 pF GND 0.1 µF bypass VCC VOUT V CC I F R L Output V O monitoring node L Single channel Pulse gen. Z = 50 Ω t= t = 5 ns o f r L 7.5 mA Input V monitoring node E 3 V 1.5 V 1.5 V VE

VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T www.vishay.com Vishay Semiconductors Rev. 2.0, 25-Oct-12 5 Document Number: 84607 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) For VO0600T and VO0630T (2) For VO0601T and VO0631T (3) For VO0611T and VO0661T Fig. 4 - Single Channel Test Circuit for Common Mode Transient Immunity Fig. 5 - Dual Channel Test Circuit for Common Mode Transient Immunity COMMON MODE TRANSIENT IMMUNITY PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Common mode transient immunity (high) CM| = 10 V, VCC = 5 V, IF = 0 mA, VO(min) = 2 V, RL = 350 Ω, Tamb = 25 °C(1) |CMH| 1000 V/μs |VCM| = 50 V, VCC = 5 V, IF = 0 mA, VO(min) = 2 V, RL = 350 Ω, Tamb = 25 °C(2) |CMH| 5000 10 000 V/μs |VCM| = 1 kV, VCC = 5 V, IF = 0 mA, VO(min) = 2 V, RL = 350 Ω, Tamb = 25 °C(3) |CMH| 15 000 25 000 V/μs Common mode transient immunity (low) |VCM| = 10 V, VCC = 5 V, IF = 7.5 mA, VO(max) = 0.8 V, RL = 350 Ω, Tamb = 25 °C(1) |CML| 1000 V/μs |VCM| = 50 V, VCC = 5 V, IF = 7.5 mA, VO(max) = 0.8 V, RL = 350 Ω, Tamb = 25 °C(2) |CML| 5000 10 000 V/μs |VCM| = 1 kV, VCC = 5 V, IF = 7.5 mA, VO(max) = 0.8 V, RL = 350 Ω, Tamb = 25 °C(3) |CML| 15 000 25 000 V/μs VCM (PEAK) Switch AT A: IF Switch AT A: V O (min. V O (max.) 0 V 5 V V CM V O V O 0.5 V CM H CM L 18976-2 GND 0.1 µF bypass V CC VOUT VCC R L Output V O monitoring node + - VCM Single channel B A V FF I F Pulse generator Z = 50 Ω O VE = 0 mA IF = 7.5 mA 18977-1 GND 0.1 µF bypass VCC R L Output V O monitoring node + - V CM B A V FF I F Pulse generator Z = 50 ΩO Dual channel VCC

VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T www.vishay.com Vishay Semiconductors Rev. 2.0, 25-Oct-12 6 Document Number: 84607 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note the safety ratings shall be ensured by means of prodective circuits. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Fig. 6 - Forward Voltage vs. Ambient Temperature Fig. 7 - Forward Voltage vs. Forward Current Fig. 8 - Reverse Current vs. Ambient Temperature Fig. 9 - Low Level Supply Current vs. Ambient Temperature SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Climatic classification according to IE C 68 part 1 55/100/21 Comparative tracking index CTI 175 399 V IOTM 6000 V VIORM 560 V PSO 350 mW ISI 150 mA TSI 165 °C Creepage 4m m Clearance 4m m Insulation thickness 0.2 mm 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C)17610 IF = 50 mA IF = 10 mA IF = 20 mA IF = 1 mA VF - Forward Voltage (V) 1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55 1.60 01 0 1 5 2 0 2 5 3 0 3 5 4 0 4 5 5 0 IF - Forward Current (mA)17611 VF - Forward Voltage (V) - 40 - 20 0 20 40 60 80 100 IR - Reverse Current (nA) Tamb - Ambient Temperature (°C)17613-1 VR = 5 V 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 - 40 - 20 0 20 40 60 80 100 ICCI - Low Level Supply Current (mA) Tamb - Ambient Temperature (°C)17614 VCC = 5 V IF = 10 mA IF = 10 mA VCC = 7 V

VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T www.vishay.com Vishay Semiconductors Rev. 2.0, 25-Oct-12 7 Document Number: 84607 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 10 - High Level Supply Current vs. Ambient Temperature Fig. 11 - Input Threshold On Current vs. Ambient Temperature Fig. 12 - Input Threshold Off Current vs. Ambient Temperature Fig. 13 - Low Level Output Voltage vs. Ambient Temperature Fig. 14 - Low Level Output Current vs. Ambient Temperature Fig. 15 - High Level Output Current vs. Ambient Temperature 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 - 40 - 20 0 20 40 60 80 100 ICCH - High Level Supply Current (mA) Tamb - Ambient Temperature (°C)17615 VCC = 7 V IF = 0.25 mA VCC = 5 V IF = 0.25 mA 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 - 40 - 20 0 20 40 60 80 100 ITH - Input Threshold On Current (µA) Tamb - Ambient Temperature (°C)17616 RL = 350 Ω RL = 4 kΩ RL = 1 kΩ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 - 40 - 20 0 20 40 60 80 100 ITH - Input Threshold Off Current (µA) Tamb - Ambient Temperature (°C)17617 RL = 350 Ω RL = 4 kΩ RL = 1 kΩ 0.00 0.05 0.10 0.15 0.20 0.25 0.30 - 40 - 20 0 20 40 60 80 100 VOL - Low Level Output Voltage (V) Tamb - Ambient Temperature (°C)17618 IL = 6 mA IL = 10 mA IL = 13 mA IL = 16 mAVCC = 5.5 V IF = 5 mA - 40 - 20 0 20 40 60 80 100 IOL - Low Level Output Current (mA) Tamb - Ambient Temperature (°C)17619 IF = 5 mA IF = 10 mA - 40 - 20 0 20 40 60 80 100 IOH - High Level Output Current (nA) Tamb - Ambient Temperature (°C)17620

VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T www.vishay.com Vishay Semiconductors Rev. 2.0, 25-Oct-12 8 Document Number: 84607 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 16 - Output Voltage vs. Forward Input Current Fig. 17 - Propagation Delay vs. Ambient Temperature Fig. 18 - Propagation Delay vs. Forward Current Fig. 19 - Pulse Width Distortion vs. Ambient Temperature Fig. 20 - Pulse Width Distortion vs. Forward Current Fig. 21 - Rise and Fall Time vs. Ambient Temperature 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Vo - Output Voltage (V) IF - Forward Input Current (mA)17621 RL = 350 Ω 54321 RL = 1 kΩ RL = 4 kΩ 100 120 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C)17622 tP - Propagation Delay Time (ns) tPLH, 4 kΩ tPLH, 1 kΩ tPLH, 350 Ω tPHL, 350 Ω tPHL, 1 kΩ tPHL, 4 kΩ 100 120 51 1 1 3 1 5 IF - Forward Current (mA)17623 tP - Propagation Delay Time (ns) tPLH, 4 kΩ tPLH, 1 kΩ tPLH, 350 Ω tPHL, 350 Ω tPHL, 1 kΩ tPHL, 4 kΩ - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C)17624 PWD - Pulse Width Distortion (ns) RL = 4 kΩ RL = 1 kΩ RL = 350 Ω 51 1 1 3 1 5 IF - Forward Current (mA)17625 PWD - Pulse Width Distortion (ns) RL = 4 kΩ RL = 1 kΩ RL = 350 Ω 100 150 200 250 300 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C)17626 tr, f - Rise and Fall Time (ns) tr, RL = 4 kΩ tf, RL = 350 Ω tf, RL = 1 kΩ tf, RL = 4 kΩtr, RL = 1 kΩ tr, RL = 350 Ω

VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T www.vishay.com Vishay Semiconductors Rev. 2.0, 25-Oct-12 9 Document Number: 84607 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 22 - Rise and Fall Time vs. Forward Current Fig. 23 - Enable Propagation Delay vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters PACKAGE MARKING (example) Notes

• The VDE Logo is only marked on option1 parts.
• Tape and reel suffix (T) is not part of the package marking. ESD CAUTION This is an ESD (electro static discharge) sensitive device . Electrostatic charges accumulate on the human body and test equipment and can discharge without detection. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. ESD withstand voltage of this device is up to 1500 V acc. to JESD22-A114-B. 100 150 200 250 300 51 1 1 3 1 5 IF - Forward Current (mA)17627 tr, f - Rise and Fall Time (ns) tr, RL = 4 kΩ tr, RL = 1 kΩ tr, RL = 350 Ω tf, RL = 350 Ω tf, RL = 1 kΩ tf, RL = 4 kΩ - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C)17628 tE - Enable Propagation Delay (ns) tELH = 4 kΩ tELH = 350 Ω tEHL = 350 Ω tEHL = 4 kΩ tELH = 1 kΩ tEHL = 1 kΩ 0.91 0.36 4.32 1.14 6.6 R 0.13 1.27 i178020-3 ISO methode A 40° 6.10 1.27 typ. 0.41 0.10 0.20 Lead coplanarity ± 0.001 max. 0.20 3.05 ± 0.05 CL R 0.25 max. 1.02 5° max. Pin one ID 3.91 ± 0.05 0.51 ± 0.10 2 plcs. 1.49 ± 0.05 3.18 ± 0.05 0601X1 V YWW Y68

www.vishay.com Vishay Revision: 08-Feb-17 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED