SD7765-4-3 WINCHESTER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
NON-OPERATING/STORAGE TEMPERTURE RATING: -40°C TO 85°C TRI-LOC BODY: .000100 MIN NICKEL PER AMS-QQ-N-290 HUMIDITY: <95 RH (AT 40°C) OPERATING TEMPERATURE RATING: -40°C TO 75°C 5. ENVIRONMENTAL: AUX ELECTRICAL CONTACTS: 600 VAC, 10 AMP LOW VOLTAGE CONTACTS: 42 - 60 VAC, 1 AMP 4. ELECTRICAL SPECIFICATIONS: COPPER FLASH PER ASTM B734 (RoHS) CRIMP SLEEVE: .000100 MIN NICKEL PER AMS-QQ-N-290 OVER .000080 MIN NICKEL PER AMS-QQN-290 (RoHS) CONTACTS: .000100 MIN GOLD PER ASTM B488 OVER OVER COPPER FLASH PER ASTM B734 (RoHS) CATALOG P/N: 7765-4-3 NOTES: UNLESS OTHERWISE SPECIFIED 1. INTERFACE COMPLIANT TO SMPTE 304 SPECIFICATION. 2. MATERIAL SPECIFICATIONS: CONTACTS AND TRI-LOC BODY: COPPER ALLOY ALIGNMENT PINS: BRASS PER ASTM B16 CRIMP SLEEVE: PHOS. BRONZE O-RINGS AND STRAIN RELIEF: SILICONE RUBBER ALL PLASTIC PARTS: 20% GLASS FILLED POLYPROPYLENE ALL OTHER METAL PARTS: 303 STAINLESS STEEL PER ASTM A582 3. FINISH SPECIFICATIONS: STAINLESS STEEL PARTS: PASSIVATE 6. OPTICAL: WAVELENGTH: 1100nm - 1350nm INSERTION LOSS: 0.3dB TYPICAL, 0.5dB MAX RETURN LOSS: > -45dB, -50dB TYPICAL 7. REPLACEMENT KITS: CONTACT KIT: 7760-000-00708Z CONTACT KIT WITH CARTRIDGE: 7760-000-00710Z 8. CABLE PREPARATION AND STRIPPING PROCEDURE: CAP-E05. 9. OPTIONAL ENVIRONMENTAL BOOT 7760-000-00704Z SOLD SEPARATELY. 10. RED LDPE DUST CAP INCLUDED (NOT SHOWN) 11. CRIMP TOOLING: FOR FACTORY APPLICATION USE HAND TOOL KTH-1000 AND DIE KTH-2035 FOR FIELD APPLICATION USE HAND TOOL KTH-5000 AND DIE KTH-5018
62 Barnes Industrial Road North
.XXXX [X.XXX] ± .XXXX Wallingford, Connecticut 06492 XXX KFC DATE 01/07/10 BY PER ER30231
DESCRIPTION
ANGLES: ± 2° SCALE: 1:1 SALES DRAWING PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] Winchester Electronics Corporation THIRD DMF026 B 1 2A 05 PRE-POLISHED SHT REV OF TRI-LOC, SMPTE 304, PLUG SD7765-4-3 .915 23.24 9/16" WRENCH FLATS (180° APART) 3/4" WRENCH FLATS (180° APART) MARK: 7765-4-3 (DATE CODE) 5.051 128.30 .804 20.42
CATALOG P/N: 7765-4-3 ITEM NO. PART NO. Description New Ferrule Design/QTY. PLATING CODE(S)
14 VNFPS01-900-34 SPLICE PROTECTOR SLEEVE, 34MM 50
13 VNSC-3-4U RED LDPE DUST CAP, .750" ID 25 12 7760-000-00711Z FIBER OPTIC CONNECTOR STUB 2 11 78-0705U REAR O-RING 25 10 78-1012U STRENGTH MEMBER SUPPORT CLAMP 10 9 78-3013U PLUG INSULATOR HALF SIDE "A" 25 8 78-3012U PLGU INSULATOR HALF SIDE "B" 25 7 78-0102U #4-40 HEX SET SCREW 10 6 1-8156U CRIMP SLEEVE (CABLE SHIELD FERRULE) 25 5 78-4006U PLUG FEMALE CRIMP CONTACT 50 4 78-4005U PLUG MALE CRIMP CONTACT 50 3 78-7003U PLUG CARTRIDGE ASSEMBLY 10 2 78-0301U WASHER FOR REAR CABLE SEAL 25 1 78-0701U REAR CABLE SEAL 25 XXX KFC 01/07/11 BY DATE APPD REVISED DRAWING PER ER30231 PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 1:1 Winchester Electronics Corporation Wallingford, Connecticut 06492 THIRD ANGLE DMF026 B A TRI-LOC, SMPTE 304, PLUG PRE-POLISHED SHT REV OF 05 2 2SD7765-4-3 2 1 11 6 7 9 845 REPLACEMENT COMPONENT ORDERING NUMBERS