VNL08C351-INV TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Applicable TFT Module LTM08C351(8.4 Type SVGA) Weight (approximately) 25g(Typ.) ABSOLUTE MAXIMUM RATINGS *1 Item Symbol Min. Max. Unit Supply Voltage VIN 0 14.0 V Input Voltage VON /VOFF - 1 VIN +1 kHz Operating Temperature *2 Tstg 0 50 °C Storage Temperature *2 Top - 20 60 °C Storage Humidity *2 H 10 90 %(RH) *1 : Do not exceed the maximum rating values under the worst probable conditions taking into account the supply voltage variation, input voltage variation, variation in part constants, ambie n t temperature and so on. Otherwise the inverter unit may be dam aged. *2 : Wet bulb temperature should be 39 °C max.,and no condensation of water. ELECTRICAL SPECIFICATION *3 Item Symbol Min. Typ. Max. Unit Supply Voltage VIN 10.8 12.0 13.2 V Input Current IIN --- 550 900 mA Open Output Voltage VOPEN 1400 - -- --- Vo - p Frequency f 40 45 50 kHz Volume Max. --- 12.0 --- mA(rms) Output Current *4 Volume Min. IFL --- 5.5 --- mA(rms) VON 2.5 --- VIN V V ON/OFF Signal Voltage VOFF --- --- 0.7 V *3 : The characteristics without remarks are measured on condition with Vin=12V and VR - VR:short. *4 : This is the sum of two output currents. *The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by Tos hiba Matsushita Display Technology or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Toshiba Matsushita Display Technology or others. *The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba Matsushita Display Technology before proceeding with the design of equipment incorporating this product. INVERTER for LTM08C351 VNL08C351-INV TENTATIVE TOSHIBA MATSUSHITA DISPLAY TECHNOLOGY All information is subject to change without notice. Please read bottom notes.

Unit : mm Standard toleran ce : ±0.5

SCHEMATIC DIAGRAM OF INVERTER CONNECTION

CONNECTOR PIN ASSIGNMENT FOR INTERFACE CN1 INPUT SIGNAL Connector : 53261 - 0890/JAPAN MOLEX CO. , LTD. Mating Connector : 51021 - 0800 Terminal No. Symbol Function 1 VIN Supply Voltage : 12.0V(Typ.) (10.8 13.2V) 2 VIN Supply Voltage : 12.0V(Typ.) (10.8 13.2V)

3 GND 1) 0V

4 GND 1) 0V

5 ON/OFF “ H ” : FL ON “ L ” : FL OFF

6 VR Connect the Potentiometer (50k Ω ) between VR(Pin No.6) and VR(Pin No.7) 7 VR Connect the Potentiometer (50k Ω ) between VR(Pin No.6) and VR(Pin No.7)

8 Vst The Warning Signal : 5V in abnormal circumstances

Connector : SM04(4.0)B - BHS - 1/JAPAN SOLDERLESS TERMINAL MFG CO. , LTD. Terminal No. Symbol Function

1 VFLH1 Output Power Supply for VFLH1 (High Voltage)

2 VFLH2 Output Power Supply for VFLH2 (High Voltage)

3 NC 2)

4 VFLL Output Power Supply for VFLL (Low Voltage)

*1 : Please connect GND pin to ground. Don ’t use it as no - connect nor connection with high impedance. *2 : NC Terminal i s open. (Don't use)