VJNON-MAGNETIC

VJNON-MAGNETIC VISHAY | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 17

Technical content

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 1 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding)

FEATURES

• Manufactured with non-magnetic materials
• Safety screened for magnetic properties
• C 0 G ( N P 0 ) a n d X 7 R / X5R dielectrics
• Wide range of case si zes, voltage ratings, and capacitance values
• Suitable for conductive epoxy bonding
• Wet built process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912

APPLICATIONS

• Magnetic Resonance Imaging (MRI)
• Medical test and diagnostic equipment
• Hi-rel medical systems
• Hi-rel aviation systems
• Laboratory analysis systems
• Navigation and electronic test equipment
• Audio amplifiers ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) GENERAL SPECIFICATION Note Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +125 °C Capacitance Range: 1.0 pF to 39 nF Voltage Range: 10 VDC to 3000 VDC Temperature Coefficient of Capacitance (TCC): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C Dissipation Factor (DF): 0.1 % maximum at 1.0 V RMS and 

1 MHz for values  1000 pF

0.1 % maximum at 1.0 VRMS and  1 kHz for values > 1000 pF Insulating Resistance: at +25 °C 100 000 M min. or 1000 F whichever is less at +125 °C 10 000 M min. or 100 F whichever is less Aging: 0 % maximum per decade Dielectric Strength Test: performed per method 103 of EIA 198-2-E. Applied test voltages  200 V DC-rated: 250 % of rated voltage 

500 VDC-rated: 200 % of rated voltage 

630 VDC, 1000 VDC-rated: 150 % of rated voltage 

1500 VDC to 3000 VDC-rated: 120 % of rated voltage 

Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +125 °C Capacitance Range: 100 pF to 6.8 μF Voltage Range: 6.3 VDC to 3000 VDC Temperature Coefficient of Capacitance (TCC): X5R: ± 15 % from -55 °C to +85 °C, with 0 VDC applied X7R: ± 15 % from -55 °C to +125 °C, with 0 VDC applied Dissipation Factor (DF):  6.3 V, 10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz 16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz   50 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz Insulating Resistance: at +25 °C 100 000 M min. or 1000 F whichever is less at +125 °C 10 000 M min. or 100 F whichever is less Aging Rate: 1 % maximum per decade Dielectric Strength Test: performed per method 103 of EIA 198-2-E. Applied test voltages  200 V DC-rated: 250 % of rated voltage  500 VDC-rated: min. 150 % of rated voltage 

1500 VDC, 3000 VDC-rated: 120 % of rated voltage 

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 2 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

• Detail ratings see “Selection Chart” QUICK REFERENCE DATA DIELECTRIC CASE MAXIMUM VOLTAGE (V) CAPACITANCE MINIMUM MAXIMUM C0G (NP0) 0402 100 1.0 pF 180 pF 0603 200 1.0 pF 1.5 nF 0805 500 1.0 pF 3.3 nF 1206 600 1.0 pF 10 nF 1210 500 1.0 pF 12 nF 1808 3000 10 pF 10 nF 1812 3000 27 pF 22 nF 1825 1000 15 pF 33 nF 2220 1000 100 pF 33 nF 2225 1000 120 pF 39 nF X5R 0402 16 27 nF 47 nF 0603 6.3 120 nF 150 nF X7R 0402 100 100 pF 22 nF 0603 100 270 pF 100 nF 0805 200 390 pF 390 nF 1206 500 680 pF 1.0 μF 1210 500 1.0 nF 1.0 μF 1808 3000 220 pF 270 nF 1812 3000 270 pF 1.0 μF 1825 1000 10 nF 2.7 μF 2220 3000 1.0 nF 2.2 μF 2225 2000 5.6 nF 4.7 μF 3640 500 15 nF 6.8 μF

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 3 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) DC voltage rating should not be exceeded in application (2) Selected values for X5R, see dielectric selection chart

ORDERING INFORMATION

RATING (1) MARKING PACKAGING 0402 0603 0805 1206 1210 1808 1812 1825 2220 2225 3640 A = C0G Y = X7R G = X5R (2) Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. An “R” indicates a decimal point. Examples 102 = 1000 pF 1R0 = 1.0 pF C0G(NP0): < 10 pF C = ± 0.25 pF D = 0.5 pF  10 pF F = ± 1 % G = ± 2 % J = ± 5 % K = ± 10 % X5R / X7R: J = ± 5 % K = ± 10 % M = ± 20 % N = non-magnetic Q = 10 V J = 16 V X = 25 V A = 50 V K = 75 V B = 100 V C = 200 V E = 500 V L = 630 V G = 1000 V R = 1500 V F = 2000 V H = 3000 V A = unmarked T = 7" reel / plastic tape R = 11 1/4" / 13" reel / plastic tape O = 7" reel / flamed paper tape I = 11 1/4" / 13" reel / flamed paper tape J = 7" reel (low quantity) DIMENSIONS in inches (millimeters) CASE CODE STYLE LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) TERMINATIONS (P) MINIMUM MAXIMUM 0402 VJ0402 0.040 + 0.006 / - 0.004 0.020 ± 0.004 (0.50 ± 0.10) 0.024 (0.60) 0.004 (0.10) 0.016 (0.41) 0603 VJ0603 0.063 ± 0.006 (1.60 ± 0.15) 0.031 ± 0.006 (0.80 ± 0.15) 0.038 (0.92) 0.012 (0.30) 0.018 (0.46) 0805 VJ0805 0.079 ± 0.008 (2.00 ± 0.20) 0.049 ± 0.008 (1.25 ± 0.20) 0.057 (1.45) 0.010 (0.25) 0.028 (0.71) 1206 VJ1206 0.126 ± 0.010 (3.20 ± 0.25) 0.063 ± 0.010 (1.60 ± 0.25) 0.067 (1.70) 0.010 (0.25) 0.028 (0.71) 1210 VJ1210 0.126 ± 0.010 (3.20 ± 0.25) 0.098 ± 0.010 (2.50 ± 0.25) 0.067 (1.70) 0.010 (0.25) 0.028 (0.71) 1808 VJ1808 0.177 ± 0.012 (4.50 ± 0.30) 0.080 ± 0.010 (2.03 ± 0.25) 0.067 (1.70) 0.010 (0.25) 0.030 (0.76) 1812 VJ1812 0.177 ± 0.012 (4.50 ± 0.30) 0.126 ± 0.010 (3.20 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) 1825 VJ1825 0.177 ± 0.012 (4.50 ± 0.30) 0.252 ± 0.010 (6.40 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) 2220 VJ2220 0.220 ± 0.008 (5.59 ± 0.20) 0.200 ± 0.010 (5.08 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) 2225 VJ2225 0.220 ± 0.010 (5.59 ± 0.25) 0.250 ± 0.010 (6.35 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) 3640 VJ3640 0.360 ± 0.015 (9.14 ± 0.38) 0.400 ± 0.015 (10.20 ± 0.38) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) L W T MAX. P

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 4 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

• • Flamed paper tape • Plastic tape SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ0402 VJ0603 VJ0805 CASE CODE 0402 0603 0805 VOLTAGE (V DC) 10 16 25 50 100 10 16 25 50 100 200 10 16 25 50 100 200 500 VOLTAGE CODE Q J X A B Q J X A B C Q J X A B C E CAP. CODE CAP. 1R0 1.0 pF 182 1.8 nF • • • • 222 2.2 nF • • • • 272 2.7 nF • • • 332 3.3 nF • • 392 3.9 nF 472 4.7 nF 562 5.6 nF 682 6.8 nF 822 8.2 nF 103 10 nF 123 12 nF

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 5 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

• • Flamed paper tape • Plastic tape SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ1206 VJ1210 CASE CODE 1206 1210 VOLTAGE (V DC) 16 25 50 100 200 500 600 25 50 100 200 500 VOLTAGE CODE J X A B C E N X A B C E CAP. CODE CAP. 1R0 1.0 pF 123 12 nF • •

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 6 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

• • Flamed paper tape • Plastic tape SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ1808 VJ1812 CASE CODE 1808 1812 VOLTAGE (V DC) 25 50 100 200 500 630 1000 1500 2000 3000 25 50 100 200 500 630 1000 1500 2000 3000 VOLTAGE CODE X A B C E L G R F H X A B C E L G R F H CAP. CODE CAP. 100 10 pF 123 12 nF • • • • 153 15 nF • • • 183 18 nF • • 223 22 nF • • 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF 683 68 nF

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 7 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

• • Flamed paper tape • Plastic tape SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ1825 VJ2220 VJ2225 CASE CODE 1825 2220 2225 VOLTAGE (V DC) 25 50 100 200 500 630 1000 25 50 100 200 500 630 1000 25 50 100 200 500 630 1000 VOLTAGE CODE X A B C E L G X A B C E L G X A B C E L G CAP. CODE CAP. 100 10 pF 120 12 pF 150 15 pF
• • 180 18 pF • • 220 22 pF • • 270 27 pF • • 330 33 pF • • 390 39 pF • • 470 47 pF • • 560 56 pF • • 680 68 pF • • 820 82 pF • • 393 39 nF • • • • 473 47 nF 563 56 nF 683 68 nF

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 8 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

• • Flamed paper tape • Plastic tape (1) See selection chart for values only available as X5R. All other values X7R. SELECTION CHART DIELECTRIC X7R / X5R (1) STYLE VJ0402 VJ0603 VJ0805 CASE CODE 0402 0603 0805 VOLTAGE (V DC) 6.3 10 16 25 50 100 6.3 10 16 25 50 100 10 16 25 50 100 200 VOLTAGE CODE Y Q J X A B Y Q J X A B Q J X A B C CAP. CODE CAP. 184 180 nF • • • 224 220 nF • • • 274 270 nF • • • 334 330 nF • • • 394 390 nF • 474 470 nF 564 560 nF 684 680 nF 824 820 nF 105 1.0 μF 125 1.2 μF

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 9 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

• • Flamed paper tape • Plastic tape SELECTION CHART DIELECTRIC X7R STYLE VJ1206 VJ1210 CASE CODE 1206 1210 VOLTAGE (V DC) 16 25 50 100 200 500 16 25 50 75 100 200 500 VOLTAGE CODE J X A B C E J X A K B C E CAP. CODE CAP. 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 125 1.2 μF

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 10 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

• • Flamed paper tape • Plastic tape SELECTION CHART DIELECTRIC X7R STYLE VJ1808 VJ1812 CASE CODE 1808 1812 VOLTAGE (V DC) 25 50 100 200 500 630 1000 1500 2000 3000 25 50 75 100 200 250 500 630 1000 1500 2000 3000 VOLTAGE CODE X A B C E L G R F H X A K B C P E L G R F H CAP. CODE CAP. 221 220 pF 564 560 nF • • • • 684 680 nF • • • • 824 820 nF • • • • 105 1.0 μF • • 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF 825 8.2 μF

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 11 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

• • Flamed paper tape • Plastic tape SELECTION CHART DIELECTRIC X7R STYLE VJ1825 VJ2220 CASE CODE 1825 2220 VOLTAGE (V DC) 25 50 100 200 500 630 1000 25 50 100 200 500 630 1000 2000 3000 VOLTAGE CODE X A B C E L G X A B C E L G F H CAP. CODE CAP. 221 220 pF 271 270 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1.0 nF 122 1.2 nF • 152 1.5 nF • 182 1.8 nF • 222 2.2 nF • 272 2.7 nF 332 3.3 nF 392 3.9 nF 472 4.7 nF 562 5.6 nF 682 6.8 nF • 822 8.2 nF • 185 1.8 μF • • • • 225 2.2 μF • • • 275 2.7 μF • 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF 825 8.2 μF

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 12 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

• • Flamed paper tape • Plastic tape SELECTION CHART DIELECTRIC X7R STYLE VJ2225 VJ3640 CASE CODE 2225 3640 VOLTAGE (V DC) 25 50 100 200 500 630 1000 1500 2000 25 50 100 200 500 VOLTAGE CODE X A B C E L G R F X A B C E CAP. CODE CAP. 102 1.0 nF 122 1.2 nF 152 1.5 nF 182 1.8 nF 222 2.2 nF 272 2.7 nF 332 3.3 nF 392 3.9 nF 472 4.7 nF 562 5.6 nF
• • 682 6.8 nF • • 822 8.2 nF • • 335 3.3 μF • • • • 395 3.9 μF • • • • 475 4.7 μF • • • 565 5.6 μF • 685 6.8 μF • 825 8.2 μF

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 13 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NON-MAGNETIC C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS -75 -50 -25 0 50 100 125 2.0 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 NP0 TEMPERATURE °C 150 175 25 75 % CAPACITANCE CHANGE TEMPERATURE COEFFICIENT OF CAPACITANCE TEMPERATURE °C MIN. INSULATION RESISTANCE VS. TEMPERATURE 10 25 100 125 10 000 1000 100 INSULATION RESISTANCE (ΩF) AGING RATE HOURS 100 1000 10 000 % CAPACITANCE CHANGE 0.2 0.1 0.0 -0.1 -0.2 11 0 0 100 200 300 400 500 600 700 800 900 1000 -20 -30 VOLTAGE COEFFICIENT OF CAPACITANCE DC VOLTS APPLIED -10 % CAPACITANCE CHANGE CHANGE OF CAPACITANCE WITH FREQUENCY FREQUENCY 1 kHz 10 kHz 100 kHz 1 MHz % CAPACITANCE CHANGE DISSIPATION FACTOR VS. FREQUENCY FREQUENCY 1 kHz 10 kHz 100 kHz 1 MHz 0.00025DISSIPATION FACTOR 0.0005 0.001

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 14 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NON-MAGNETIC X7R DIELECTRIC - TYPICAL PARAMETERS 100 TEMPERATURE °C % RATED VOLTAGE -75 -50 -25 0 20 50 75 100 125 150 175 RATED VOLTAGE VS. TEMPERATURE 150 200 10 25 100 10 000 1000 100 INSULATION RESISTANCE ( ΩF) 150 MIN. INSULATION RESISTANCE VS. TEMPERATURE TEMPERATURE °C HOURS 1.0 0.0 -1.0 -2.0 % CAPACITANCE CHANGE-3.0 -4.0 AGING RATE 1 10 100 1000 10 000 0.0 TEMPERATURE °C % DISSIPATION FACTOR 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 DISSIPATION FACTOR VS. TEMPERATURE X7R -75 -50 -25 0 20 50 75 100 125 150 175 0.020 0.016 0.012 0.008 0.004 DISSIPATION FACTOR VS. VOLTAGE 50 V 100 V DISSIPATION FACTOR 0 10 20 30 40 50 60 70 80 90 100 DC VOLTS APPLIED UN/V- DISSIPATION FACTOR VS. VOLTAGE 0 100 200 300 400 500 600 700 UN/V- 0.020 0.016 0.012 0.008 0.004 500 V 200 V DISSIPATION FACTOR DC VOLTS APPLIED

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 15 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NON-MAGNETIC X7R DIELECTRIC - TYPICAL PARAMETERS IMPEDANCE VS. FREQUENCY 500 V/630 V FREQUENCY (MHz) 0.01 0.1 1 10 100 1000 100 0.1 0.01 IMPEDANCE (Ω) 1 µF 0.1 µF 0.01 µF IMPEDANCE VS. FREQUENCY 2000 V FREQUENCY (MHz) IMPEDANCE (Ω) 0.1 1000 1 10 100 1000 100 4.7 nF 2.2 nF 1 nF 0 10 20 30 40 50 60 70 80 90 100 -15 -20 -25 -30 -10 25 V RATED 50 V 100 V VOLTAGE COEFFICIENT OF CAPACITANCE DC VOLTS APPLIED % CAPACITANCE CHANGE RATED RATED DC VOLTS APPLIED % CAPACITANCE CHANGE -10 -20 -30 -40 -50 -60 -70 -80 VOLTAGE COEFFICIENT OF CAPACITANCE LOWER CAPACITANCE 0 100 200 300 400 500 600 700 Case Size 1206 1210 1808 1812 Range 100 pF to 4700 pF 390 pF to 10 000 pF 470 pF to 18 000 pF 1000 pF to 27 000 pF VOLTAGE COEFFICIENT OF CAPACITANCE DC VOLTS APPLIED % CAPACITANCE CHANGE 0 500 1000 1500 2000 2500 -10 -20 -30 -40 -50 -60 -70 -80

1000 V/1500 V RATED

2000 V RATED

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Revision: 05-Dec-16 16 Document Number: 45128 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) Vishay Vitramon uses embossed plastic carrier tape (2) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (3) n/a = not available (4) Packaging code “O/I” or “T/R” and lower quantities can depend on product thickness STANDARD PACKAGING QUANTITIES (1)(2)(3) CASE CODE TAPE SIZE 7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES PAPER TAPE PACKAGING CODE “O” PLASTIC TAPE PACKAGING CODE “T” LOW QUANTITY PACKAGING CODE “J” PAPER TAPE PACKAGING CODE “I” PLASTIC TAPE PACKAGING CODE “R” 0402 8 mm 5000 n/a 1000 10 000 n/a 0603 (4) 8 mm 4000 4000 1000 10 000 10 000 0805 (4) 8 mm 3000 3000 1000 10 000 10 000 1206 (4) 8 mm n/a 3000 / 2500 1000 n/a 10 000 / 9000 1210 (4) 8 mm n/a 3000 / 2500 / 2000 1000 n/a 10 000 / 9000 1808 12 mm n/a 2000 500 n/a 10 000 1812 12 mm n/a 1000 500 n/a 4000 1825 12 mm n/a 1000 500 n/a 4000 2220 12 mm n/a 1000 500 n/a 4000 2225 12 mm n/a 500 250 n/a 4000 3640 16 mm n/a 500 n/a n/a n/a STORAGE AND HANDLING CONDITIONS (1) Store the components at +5 °C to +40 °C ambient temperature and  70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment.  Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alka li, salt, or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and av oid exposure to moisture or dust. c. Do not expose products to excessive shoc k, vibration, direct sunlight, and so on.

www.vishay.com Vishay Revision: 13-Jun-16 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.