VJ3640 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

VJ Controlled Discharge Capacitor (CDC) www.vishay.com Vishay Vitramon Revision: 08-Mar-12 1 Document Number: 45203 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications

FEATURES

  • Integrated resistor on the surface of the capacitor
  • Low electrostrictive ceramic formulation for repeated charge and discharge cycles
  • High pulse discharge currents
  • Excellent reliability and high voltage performance
  • Available with tin/lead barrier termination (code “L”)
  • Wet built process
  • Reliable Noble Metal Electrode (NME) system
  • Made with a combination of design, materials and tight process control to achieve very high field reliability
  • Resistor glass overglaze contains lead
  • Material categorization: For definitions please see www.vishay.com/doc?99912

APPLICATIONS

  • Detonation devices (munitions, pyrotechnic, blasting)
  • Down hole drilling
  • Electronic fuzing ELECTRICAL SPECIFICATIONS Note
  • Electrical characteristics at + 25 °C unless otherwise specified Operating Temperature: - 55 °C to + 125 °C Capacitance Range: 33 nF to 560 nF Voltage Range: 1000 VDC to 1500 VDC Temperature Coefficient of Capacitance (TCC): X5P: ± 10 % from - 55 °C to + 85 °C, with 0 VDC applied X7R: ± 15 % from - 55 °C to + 125 °C, with 0 VDC applied Parallel Resistor: 500 M ± 30 % Dissipation Factor (DF): 2.5 % maximum at 1.0 V RMS and 1 kHz Aging Rate: 1 % maximum per decade Insulation Resistance (IR): At + 25 °C without resistor: 100 000 M  minimum or 1000 F, whichever is less. At + 125 °C without resistor: 10 000 M  minimum or 100 F, whichever is less. Dielectric Strength Test: Performed per Method 103 of EIA 198-2-E. Applied test voltages: 1000 V DC/1500 VDC-rated: 120 % of rated voltage

VJ Controlled Discharge Capacitor (CDC) www.vishay.com Vishay Vitramon Revision: 08-Mar-12 2 Document Number: 45203 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • Detail ratings see selection chart Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: mlcc@vishay.com (2) Process Code must be added to control special requirements (3) Size designator may be replaced by four digit drawing number used to control non-standard products and/or special requirements QUICK REFERENCE DATA DIELECTRIC CASE MAXIMUM VOLTAGE (V) CAPACITANCE MINIMUM MAXIMUM X7R (X5P) 3040 1500 33 nF 220 nF 3640 1500 47 nF 330 nF 4044 1500 100 nF 560 nF

ORDERING INFORMATION

VJ3640 (3) Y 184 K X R A T 8R (2) CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION DC VOLTAGE RATING (1) MARKING PACKAGING PROCESS CODE 3040 3640 4044 Y = X7R (X5P) Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples: 184 = 180 nF 334 = 330 nF J = ± 5 % K = ± 10 % M = ± 20 % X = Ni barrier 100 % tin plate matte finish L = Ni barrier with tin lead plated finish min. 4 % lead G = 1000 V R = 1500 V A = Unmarked T = 7" reel/plastic tape DIMENSIONS in inches [millimeters] CASE CODE PART ORDERING NUMBER LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) TERMINATION (P) MINIMUM MAXIMUM 3040 VJ3040 0.300 ± 0.015 [7.62 ± 0.38] 0.400 ± 0.015 [10.20 ± 0.38] 0.100 [2.54] 0.010 [0.25] 0.030 [0.76] 3640 VJ3640 0.360 ± 0.015 [9.14 ± 0.38] 0.400 ± 0.015 [10.20 ± 0.38] 0.120 [3.05] 0.010 [0.25] 0.030 [0.76] 4044 VJ4044 0.400 ± 0.015 [10.16 ± 0.38] 0.440 ± 0.015 [11.17 ± 0.38] 0.120 [3.05] 0.020 [0.50] 0.040 [1.00] L W P T MAX.

VJ Controlled Discharge Capacitor (CDC) www.vishay.com Vishay Vitramon Revision: 08-Mar-12 3 Document Number: 45203 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034

  • Plastic tape CONSTRUCTION SELECTION CHART DIELECTRIC X7R (X5P) STYLE VJ3040 (1) VJ3640 (1) VJ4044 (1) CASE CODE 3040 3640 4044 VOLTAGE (V DC) 1000 1500 1000 1500 1000 1500 V O L T A G E C O D EGRGRGR CAP. CODE CAP. 223 0.022 μF 273 0.027 μF 333 0.033 μF • 393 0.039 μF • 473 0.047 μF • • 563 0.056 μF • • • 683 0.068 μF • • • 823 0.082 μF • • • 274 0.27 μF • • • 334 0.33 μF • • • 394 0.39 μF • 474 0.47 μF • 564 0.56 μF • 684 0.68 μF 824 0.82 μF 105 1.0 μF 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF Surface mount multilayer ceramic chip capacitor Over glaze: Resistor passivation to protect against contamination and increase electrical stability Resistor: Thick film print

VJ Controlled Discharge Capacitor (CDC) www.vishay.com Vishay Vitramon Revision: 08-Mar-12 4 Document Number: 45203 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TYPICAL PARAMETERS APPLIED VOLTAGE (V DC) CAPACITANCE (%) VOLTAGE COEFFICIENT OF CAPACITANCE - 80 - 70 - 60 - 50 - 40 - 30 - 20 - 10 01 5 0 0 12501000750500250 4044, 330 nF, 1500 V 3640, 180 nF, 1500 V TEMPERATURE (°C) CAPACITANCE (%) TEMPERATURE COEFFICIENT OF CAPACITANCE - 20 - 15 - 10 - 5 - 75 125 1055- 15- 35- 55 25 45 65 85 4044, 330 nF, 1500 V 3640, 180 nF, 1500 V X7R: ± 15 % from - 55 °C to 125 °C TCC also meets X5P ± 10 % from - 55 °C to + 85 °C DISCHARGE PULSE OF 4044 CDC Peak current: > 1700 Ap Rise time 79 ns 2000 CHARGE VOLTAGE (V DC) PULSE DISCHARGE CURRENT (A) DISCHARGE CURRENT VS. CHARGE VOLTAGE 600 800 1000 1200 1400 1600 1800 900 1500 120011001000 1300 1400 4044, 330 nF 3640, 274 nF 3640, 180 nF Above 1200 V, excessive dV/dt may cause failure 0.040 TEMPERATURE (°C) % DISSIPATION FACTOR DISSIPATION FACTOR VS. TEMPERATURE 0.000 0.005 0.010 0.020 0.025 0.030 0.035 - 55 125 25- 5- 35 85 45 65 0.015 105- 15 4044, 330 nF, 1500 V 3640, 180 nF, 1500 V 1400 TIME (s) DISCHARGE VOLTAGE (VDC) SELF DISCHARGE VS. TIME 200 600 800 1000 1200 09 0 0 400300100 700 500 600 400 800200 Capacitor (no Resistor) CDC, 500 MΩ Resistor Vc = Vo x ε-t/rc

VJ Controlled Discharge Capacitor (CDC) www.vishay.com Vishay Vitramon Revision: 08-Mar-12 5 Document Number: 45203 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) Vishay Vitramon uses embossed plastic carrier tape (2) REFERENCE: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (3) n/a = Not available STANDARD PACKAGING QUANTITIES (1)(2)(3) CASE CODE TAPE SIZE 7" REEL QUANTITIES PLASTIC TAPE PACKAGING CODE “T” 3040 16 mm 500 3640 16 mm 500 4044 24 mm 300 STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to + 40 °C ambient temperature and  70 % related humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a.Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and av oid exposure to moisture or dust. c. Do not expose products to excessive shoc k, vibration, direct sunlight and so on.

www.vishay.com Vishay Revision: 12-Mar-12 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vish ay’s terms and condit ions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicate d in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vi shay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The Euro pean Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.