VJ0402 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 15

Technical content

www.vishay.com Vishay Vitramon Revision: 24-May-2018 1 Document Number: 45199 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications

FEATURES

  • C0G (NP0) and X7R dielectrics offered
  • C0G (NP0) is an ultra-stable dielectric offering a very low Temperature Coefficient of Capacitance (TCC)
  • C0G (NP0) offers low dissipation
  • Excellent aging characteristics
  • Ideal for decoupling and filtering (X7R)
  • Ideal for surge suppressi on and high voltage

applications

  • Wide range of case sizes, voltage ratings and capacitance values
  • Wet build process
  • Reliable Noble Metal Electrode (NME) system
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912
  • Timing and tuning circuits
  • Sensor and scanner applications
  • Decoupling and filtering
  • Surge suppression ELECTRICAL SPECIFICATIONS Available C0G (NP0) DIELECTRIC GENERAL SPECIFICATION Note  Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +150 °C (above +125 °C changed characteristics) Capacitance Range: 1 pF to 56 nF Voltage Range: 25 VDC to 1000 VDC Temperature Coefficient of Capacitance (TCC): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C Dissipation Factor (DF): 0.1 % maximum at 1.0 V RMS and 

1 MHz for values  1000 pF

0.1 % maximum at 1.0 VRMS and  1 kHz for values > 1000 pF Insulating Resistance: at +25 °C 100 000 M min. or 1000 F whichever is less at +125 °C 10 000 M min. or 100 F whichever is less Aging Rate: 0 % maximum per decade Dielectric Strength Test: performed per method 103 of EIA 198-2-E. Applied test voltages  200 V DC-rated: 250 % of rated voltage 

500 VDC-rated: 200 % of rated voltage 

630 VDC,1000 VDC-rated: 150 % of rated voltage 

Note Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +150 °C (above +125 °C changed characteristics) Capacitance Range: 120 pF to 6.8 μF Voltage Range: 16 V DC to 1000 VDC Temperature Coefficient of Capacitance (TCC): ± 15 % from -55 °C to +125 °C, with 0 VDC applied Dissipation Factor (DF): 16 V / 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz > 25 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz Insulating Resistance: at +25 °C 100 000 M min. or 1000 F whichever is less at +125 °C 10 000 M min. or 100 F whichever is less Aging Rate: 1 % maximum per decade Dielectric Strength Test: performed per method 103 of EIA 198-2-E. Applied test voltages  250 V DC-rated: 250 % of rated voltage  500 VDC-rated: min. 150 % of rated voltage  630 VDC, 1000 VDC-rated: min. 120 % of rated voltage 

www.vishay.com Vishay Vitramon Revision: 24-May-2018 2 Document Number: 45199 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • Detail ratings see “Selection Chart” QUICK REFERENCE DATA DIELECTRIC CASE MAXIMUM VOLTAGE (V) CAPACITANCE MINIMUM MAXIMUM C0G (NP0) 0402 100 1.0 pF 220 pF 0603 200 1.0 pF 1.0 nF 0805 500 1.0 pF 4.7 nF 1206 630 1.0 pF 10 nF 1210 630 56 pF 12 nF 1808 1000 18 pF 10 nF 1812 1000 39 pF 22 nF 1825 500 100 pF 39 nF 2220 1000 270 pF 47 nF 2225 1000 270 pF 56 nF X7R 0402 100 120 pF 47 nF 0603 200 330 pF 150 nF 0805 250 330 pF 470 nF 1206 630 330 pF 1.0 μF 1210 630 390 pF 1.0 μF 1808 1000 470 pF 270 nF 1812 1000 1.0 nF 1.0 μF 1825 1000 10 nF 2.7 μF 2220 500 15 nF 2.2 μF 2225 1000 33 nF 4.7 μF 3640 500 27 nF 6.8 μF

www.vishay.com Vishay Vitramon Revision: 24-May-2018 3 Document Number: 45199 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) Case size designator may be replaced by four digit drawing number used to control non-standard products and / or special requirements (2) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: mlcc@vishay.com (3) Process code may be added with up to three digits, used to control non-standard products and / or special requirements (4) Termination code “E” is for conductive epoxy assembly (5) Polymer termination for size 0603 and larger. Packaging only in plastic tape “T” / “R”

ORDERING INFORMATION

VJ0805 (1) Y 102 K X A A T ### (3) CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION DC VOLTAGE RATING (2) MARKING PACKAGING PROCESS CODE 0402 0603 0805 1206 1210 1808 1812 1825 2220 2225 3640 A = C0G (NP0) Y = X7R Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples: 1R8 = 1.8 pF 102 = 1000 pF B = ± 0.10 pF C = ± 0.25 pF D = ± 0.5 pF F = ± 1 % G = ± 2 % J = ± 5 % K = ± 10 % M = ± 20 % Note C0G (NP0): B, C, D < 10 pF F, G, J, K 10 pF X7R: J, K, M X = Ni barrier 100 % tin plated matte finish F, E = AgPd (4) B = polymer 100 % tin plated matte finish (5) J = 16 V X = 25 V A = 50 V B = 100 V C = 200 V P = 250 V E = 500 V L = 630 V G = 1000 V A = unmarked M = marked Note Marking is only available for 0805 and 1206 with termination code “X” / “B” C = 7" reel / paper tape T = 7" reel / plastic tape paper tape plastic tape O = 7" reel / flamed paper tape flamed paper tape Note “I” and “O” are used for “F”, “E” termination size 0402 / 0603 / 0805 ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN X Ni barrier 100 % tin plated matte finish Yes Yes EA g P d Y e s Y e s B Polymer layer, 100 % tin plated matte finish Yes No FA g P d Y e s N o

www.vishay.com Vishay Vitramon Revision: 24-May-2018 4 Document Number: 45199 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • Polymer (B-termination) ha ve increased dimensions: length 0.006"(0.15 mm) DIMENSIONS in inches (millimeters) CASE CODE STYLE LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) TERMINATION (P) MINIMUM MAXIMUM 0402 VJ0402 0.040 + 0.004 / - 0.002 0.024 (0.60) 0.004 (0.10) 0.016 (0.41) 0603 VJ0603 0.063 ± 0.006 (1.60 ± 0.15) 0.031 ± 0.006 (0.80 ± 0.15) 0.038 (0.97) 0.012 (0.30) 0.022 (0.55) 0805 VJ0805 0.079 ± 0.008 (2.00 ± 0.20) 0.049 ± 0.008 (1.25 ± 0.20) 0.057 (1.45) 0.010 (0.25) 0.030 (0.76) 1206 VJ1206 0.126 ± 0.010 (3.20 ± 0.25) 0.063 ± 0.010 (1.60 ± 0.25) 0.067 (1.70) 0.010 (0.25) 0.030 (0.76) 1210 VJ1210 0.126 ± 0.010 (3.20 ± 0.25) 0.098 ± 0.010 (2.50 ± 0.25) 0.067 (1.70) 0.010 (0.25) 0.030 (0.76) 1808 VJ1808 0.180 ± 0.012 (4.57 ± 0.30) 0.080 ± 0.010 (2.03 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.035 (0.90) 1812 VJ1812 0.177 ± 0.012 (4.50 ± 0.30) 0.126 ± 0.008 (3.20 ± 0.20) 0.086 (2.18) 0.010 (0.25) 0.035 (0.90) 1825 VJ1825 0.177 ± 0.012 (4.50 ± 0.30) 0.252 ± 0.010 (6.40 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.035 (0.90) 2220 VJ2220 0.220 ± 0.010 (5.59 ± 0.25) 0.200 ± 0.010 (5.08 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.037 (0.95) 2225 VJ2225 0.220 ± 0.010 (5.59 ± 0.25) 0.250 ± 0.010 (6.35 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.037 (0.95) 3640 VJ3640 0.360 ± 0.015 (9.14 ± 0.38) 0.400 ± 0.015 (10.20 ± 0.38) 0.086 (2.18) 0.010 (0.25) 0.039 (1.00) L W P T MAX.

www.vishay.com Vishay Vitramon Revision: 24-May-2018 5 Document Number: 45199 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

  • • Paper tape • Plastic tape (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ0402 VJ0603 VJ0805 VJ1206 (1) VJ1210 (1) CASE CODE 0402 0603 0805 1206 1210 VOLTAGE (V DC) 25 50 100 50 100 200 50 100 200 500 50 100 200 500 630 50 100 200 500 630 VOLTAGE CODE X A B A B C A B C E A B C E L A B C E L CAP. CODE CAP. 1R0 1.0 pF 103 10 nF • • • • 123 12 nF • • 153 15 nF 183 18 nF 223 22 nF 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF

www.vishay.com Vishay Vitramon Revision: 24-May-2018 6 Document Number: 45199 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

  • Plastic tape (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ1808 (1) VJ1812 (1) VJ1825 (1) CASE CODE 1808 1812 1825 VOLTAGE (V DC) 50 100 200 500 1000 50 100 200 500 1000 50 100 200 500 VOLTAGE CODE A B C E G A B C E G A B C E CAP. CODE CAP. 1R0 1.0 pF 1R2 1.2 pF 1R5 1.5 pF 1R8 1.8 pF 2R2 2.2 pF 2R7 2.7 pF 3R3 3.3 pF 3R9 3.9 pF 4R7 4.7 pF 5R6 5.6 pF 6R8 6.8 pF 8R2 8.2 pF 100 10 pF 120 12 pF 150 15 pF 180 18 pF 220 22 pF • • 270 27 pF • • 330 33 pF • • 183 18 nF • • • • 223 22 nF • • • • 273 27 nF • • • 333 33 nF • • 393 39 nF • 473 47 nF 563 56 nF

www.vishay.com Vishay Vitramon Revision: 24-May-2018 7 Document Number: 45199 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

  • Plastic tape (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ2220 (1) VJ2225 (1) CASE CODE 2220 2225 VOLTAGE (V DC) 50 100 200 500 630 1000 50 100 200 500 1000 VOLTAGE CODE A B C E L G A B C E G CAP. CODE CAP. 1R0 1.0 pF 1R2 1.2 pF 1R5 1.5 pF 1R8 1.8 pF 2R2 2.2 pF 2R7 2.7 pF 3R3 3.3 pF 3R9 3.9 pF 4R7 4.7 pF 5R6 5.6 pF 6R8 6.8 pF 8R2 8.2 pF 100 10 pF 120 12 pF 150 15 pF 180 18 pF 220 22 pF 270 27 pF 330 33 pF 390 39 pF 470 47 pF 560 56 pF 680 68 pF 820 82 pF 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 393 39 nF • • • • 473 47 nF • • • 563 56 nF •

www.vishay.com Vishay Vitramon Revision: 24-May-2018 8 Document Number: 45199 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

  • • Paper tape • Plastic tape SELECTION CHART DIELECTRIC X7R STYLE VJ0402 VJ0603 VJ0805 CASE CODE 0402 0603 0805 VOLTAGE (V DC) 16 25 50 100 16 25 50 100 200 16 25 50 100 200 250 VOLTAGE CODE J X A B J X A B C J X A B C P CAP. CODE CAP. 121 120 pF 184 180 nF • • 224 220 nF • • 274 270 nF • • 334 330 nF • • 394 390 nF • 474 470 nF • 564 560 nF 684 680 nF 824 820 nF 105 1.0 μF 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF

www.vishay.com Vishay Vitramon Revision: 24-May-2018 9 Document Number: 45199 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

  • • Paper tape • Plastic tape (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 SELECTION CHART DIELECTRIC X7R STYLE VJ1206 (1) VJ1210 (1) CASE CODE 1206 1210 VOLTAGE (V DC) 16 25 50 100 200 250 500 630 16 25 50 100 200 250 500 630 VOLTAGE CODE J X A B C P E L J X A B C P E L CAP. CODE CAP. 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF
  • • •• 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF

www.vishay.com Vishay Vitramon Revision: 24-May-2018 10 Document Number: 45199 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

  • Plastic tape (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 SELECTION CHART DIELECTRIC X7R STYLE VJ1808 (1) VJ1812 (1) VJ1825 (1) CASE CODE 1808 1812 1825 VOLTAGE (V DC) 50 100 200 500 1000 25 50 100 200 250 500 630 1000 25 50 100 200 250 500 1000 VOLTAGE CODE A B C E G X A B C P E L G X A B C P E G CAP. CODE CAP. 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF • 681 680 pF • 821 820 pF • 125 1.2 μF • • • 155 1.5 μF • • • 185 1.8 μF • • 225 2.2 μF • 275 2.7 μF • 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF

www.vishay.com Vishay Vitramon Revision: 24-May-2018 11 Document Number: 45199 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes RoHS-compliant

  • Plastic tape (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 SELECTION CHART DIELECTRIC X7R STYLE VJ2220 (1) VJ2225 (1) VJ3640 (1) CASE CODE 2220 2225 3640 VOLTAGE (V DC) 50 100 200 500 25 50 100 200 500 1000 25 50 100 200 500 VOLTAGE CODE A B C E X A B C E G X A B C E CAP. CODE CAP. 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1.0 nF 122 1.2 nF 152 1.5 nF 182 1.8 nF 222 2.2 nF 272 2.7 nF 332 3.3 nF 392 3.9 nF 472 4.7 nF 562 5.6 nF 682 6.8 nF 822 8.2 nF 103 10 nF 123 12 nF 153 15 nF 183 18 nF • 223 22 nF • 273 27 nF • • • 335 3.3 μF • • • • 395 3.9 μF • • • • 475 4.7 μF • • • 565 5.6 μF • 685 6.8 μF •

www.vishay.com Vishay Vitramon Revision: 24-May-2018 12 Document Number: 45199 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS - 75 - 50 - 25 0 50 100 125 2.0 1.5 1.0 0.5 0.0 - 0.5 - 1.0 - 1.5 - 2.0 NP0 TEMPERATURE °C 150 175 25 75 % CAPACITANCE CHANGE TEMPERATURE COEFFICIENT OF CAPACITANCE TEMPERATURE °C INSULATION RESISTANCE VS. TEMPERATURE 10 25 100 150 10 000 1000 100 INSULATION RESISTANCE (ΩF) AGING RATE HOURS 100 1000 10 000 % CAPACITANCE CHANGE 0.2 0.1 0.0 - 0.1 - 0.2 11 0 0.2 0.1 0.0 - 0.1 - 0.2 DC VOLTS APPLIED VOLTAGE COEFFICIENT OF CAPACITANCE % CAPACITANCE CHANGE 0 10 20 30 40 50 60 70 80 90 100 CHANGE OF CAPACITANCE WITH FREQUENCY FREQUENCY 1 kHz 10 kHz 100 kHz 1 MHz % CAPACITANCE CHANGE

www.vishay.com Vishay Vitramon Revision: 24-May-2018 13 Document Number: 45199 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 X7R DIELECTRIC - TYPICAL PARAMETERS - 5 - 10 - 15 - 20 TEMPERATURE °C % CAPACITANCE CHANGE- 25 - 30 TEMPERATURE COEFFICIENT OF CAPACITANCE - 75 - 50 - 25 0 20 50 75 100 125 150 175 10 25 100 10 000 1000 100 INSULATION RESISTANCE (ΩF) 150 INSULATION RESISTANCE VS. TEMPERATURE TEMPERATURE °C 0.0 DISSIPATION FACTOR VS. TEMPERATURE TEMPERATURE °C % DISSIPATION FACTOR0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 - 75 - 50 - 25 0 25 50 75 100 125 150 175 HOURS 1.0 0.0 - 1.0 - 2.0 % CAPACITANCE CHANGE - 3.0 - 4.0 AGING RATE 1 10 100 1000 10 000 100 TEMPERATURE °C % RATED VOLTAGE RATED VOLTAGE VS. TEMPERATURE 150 200 - 75 - 50 - 25 0 20 50 75 100 125 150 175 180 0 10 20 30 40 50 60 70 80 90 100 - 15 - 20 - 25 - 30 - 10 - 5 25 V RATED 50 V 100 V VOLTAGE COEFFICIENT OF CAPACITANCE DC VOLTS APPLIED % CAPACITANCE CHANGE RATED RATED 0.020 0.016 0.012 0.008 0.004 DISSIPATION FACTOR VS. VOLTAGE 50 V 100 V DC VOLTS APPLIED DISSIPATION FACTOR 0 10 20 30 40 50 60 70 80 90 100 DISSIPATION FACTOR VS. VOLTAGE 0 100 200 300 400 500 600 700 0.020 0.016 0.012 0.008 0.000

500 V/630 V200 V

www.vishay.com Vishay Vitramon Revision: 24-May-2018 14 Document Number: 45199 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) Vishay Vitramon uses embossed plastic carrier tape (2) REFERENCE: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (3) n/a = not available (4) Packaging “C” / “P” / “O” / “I” and “T” / “R” or lower quantities can depend from product thickness (5) Polymer termination, code “B”, only available in plastic tape “T” / “R” STANDARD PACKAGING QUANTITIES (1)(2)(3) CASE CODE TAPE SIZE 7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES PAPER TAPE PACKAGING CODE “C” / “O” PLASTIC TAPE PACKAGING CODE “T” PAPER TAPE PACKAGING CODE “P” / “I” PLASTIC TAPE PACKAGING CODE “R” 0402 8 mm 5000 n/a 10 000 n/a 0603 (4)(5) 8 mm 4000 4000 10 000 10 000 0805 (4)(5) 8 mm 3000 3000 10 000 10 000 1206 (4)(5) 8 mm 3000 2500 / 3000 10 000 9000 / 10 000 1210 (4) 8 mm n/a 2000 / 2500 / 3000 n/a 9000 / 10 000 1808 12 mm n/a 2000 n/a 10 000 1812 12 mm n/a 1000 n/a 4000 1825 12 mm n/a 1000 n/a 4000 2220 12 mm n/a 1000 n/a n/a 2225 12 mm n/a 500 n/a n/a 3640 16 mm n/a 500 n/a n/a STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to 40 °C ambient temperature and  70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment.  Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alka li, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and av oid exposure to moisture or dust. c. Do not expose products to excessive shoc k, vibration, direct sunlight and so on.

www.vishay.com Vishay Revision: 08-Feb-17 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED