VJC0G VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

www.vishay.com For technical ques tions, contact: mlcc@vishay.com Document Number: 45053 VJ C0G (NP0) Dielectric Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications

FEATURES

  • C0G is an ultra-stable dielectric offering a Temperature Coefficient of Capacitance (TCC) of 0 ± 30 ppm/°C
  • Low Dissipation Factor (DF)
  • Ideal for critical timing and tuning applications
  • Ideal for snubber and surge suppression applications
  • Protective surface coating of high voltage capacitors maybe required to prevent surface arcing.
  • Surface mount, precious metal technology, wet build process ELECTRICAL SPECIFICATIONS Note: Electrical characteristics at + 25 °C unless otherwise specified Operating Temperature: - 55 °C to + 125 °C Capacitance Range: 1.0 pF to 0.056 µF Voltage Rating: 10 Vdc to 1000 Vdc Temperature Coefficient of Capacitance (TCC): 0 ± 30 ppm/°C from - 55 °C to + 125 °C Dissipation Factor (DF): 0.1 % maximum at 1.0 Vrms and 1 kHz for values > 1000 pF 0.1 % maximum at 1.0 Vrms and 1 MHz for values ≤ 1000 pF Aging Rate: 0 % maximum per decade Insulation Resistance (IR): At + 25 °C and rated voltage 100 000 M Ω minimum or 1000 ΩF, whichever is less At + 125 °C and rated voltage 10 000 M Ω minimum or 100 ΩF, whichever is less Dielectric Withstanding Voltage (DWV): This is the maximum voltage the capacitors are tested for a 1 to 5 second period and the charge/discharge current does not exceed 50 mA ≤ 200 Vdc : DWV at 250 % of rated voltage

500 Vdc: DWV at 200 % of rated voltage

630/1000 Vdc: DWV at 150 % of rated voltage Notes: (1) DC voltage rating should not be exceeded in application (2) Process Code may be added with up to three digits, used to control non-standard products and/or special requirements (3) Case size designator may be replaced by a four digit drawing number used to control non-standard products and/or requirements

ORDERING INFORMATION

VJ0805 A 102 K X A A T ### (2) CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION DC VOLTAGE RATING (1) MARKING PACKAGING PROCESS CODE 0402 0603 0805 1206 1210 1808 1812 1825 2220 2225 A = C0G (NP0) Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. An “R” indicates a decimal point. Examples: 102 = 1000 pF 1R8 = 1.8 pF B = ± 0.10 pF C = ± 0.25 pF D = ± 0.5 pF F = ± 1 % G = ± 2 % J = ± 5 % K = ± 10 % Note: B, C, D < 10 pF F , G, J, K ≥ 10 pF X = Ni barrier 100 % tin plated F = AgPd X = 25 V A = 50 V B = 100 V C = 200 V E = 500 V L = 630 V G = 1000 V A = Unmarked M = Marked Note: Marking is only available for 0805 and 1206 T = 7" reel/plastic tape C = 7" reel/paper tape R = 11 1/4" reel/plastic tape P = 11 1/4" reel/paper tape O = 7" reel/flamed paper tape I = 11 1/4"/13" reel/flamed paper tape Note: “I” and “O” is used for “F” termination paper taped RoHS COMPLIANT

VJ C0G (NP0) Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications Vishay Vitramon Document Number: 45053 For technical questions, contact: mlcc@vishay.com www.vishay.com Revision: 28-Aug-08 39 DIMENSIONS in inches [millimeters] EIA STYLE PART ORDERING NUMBER LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) TERMINATION (P) MINIMUM MAXIMUM 0402 VJ0402 0.040 + 0.004/- 0.002 0.024 [0.60] 0.004 [0.10] 0.016 [0.41] 0603 VJ0603 0.063 ± 0.005 [1.60 ± 0.12] 0.031 ± 0.005 [0.80 ± 0.12] 0.036 [0.92] 0.012 [0.30] 0.018 [0.46] 0805 VJ0805 0.079 ± 0.008 [2.00 ± 0.20] 0.049 ± 0.008 [1.25 ± 0.20] 0.057 [1.45] 0.010 [0.25] 0.028 [0.71] 1206 VJ1206 0.126 ± 0.008 [3.20 ± 0.20] 0.063 ± 0.008 [1.60 ± 0.20] 0.067 [1.70] 0.010 [0.25] 0.028 [0.71] 1210 VJ1210 0.126 ± 0.008 [3.20 ± 0.20] 0.098 ± 0.008 [2.50 ± 0.20] 0.067 [1.70] 0.010 [0.25] 0.028 [0.71] - VJ1808 0.177 ± 0.010 [4.50 ± 0.25] 0.080 ± 0.010 [2.03 ± 0.25] 0.067 [1.70] 0.010 [0.25] 0.030 [0.76] 1812 VJ1812 0.177 ± 0.010 [4.50 ± 0.25] 0.126 ± 0.008 [3.20 ± 0.20] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] 1825 VJ1825 0.177 ± 0.010 [4.50 ± 0.25] 0.252 ± 0.010 [6.40 ± 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] - VJ2220 0.220 ± 0.008 [5.59 ± 0.20] 0.200 ± 0.010 [5.08 ± 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] - VJ2225 0.220 ± 0.010 [5.59 ± 0.25] 0.250 ± 0.010 [6.35 ± 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] L W P T MAX.

www.vishay.com For technical ques tions, contact: mlcc@vishay.com Document Number: 45053 VJ C0G (NP0) Dielectric Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications Note: (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034  Paper tape  Plastic tape SELECTION CHART STYLE VJ0402 VJ0603 VJ0805 VJ1206 VJ1210 (1) EIA TYPE 0402 0603 0805 1206 1210 VOLTAGE (Vdc) 25 50 100 50 100 200 50 100 200 500 50 100 200 500 630 50 100 200 500 630 CAP. CODE CAP. 562 5600 pF     682 6800 pF    822 8200 pF   103 0.010 µF   123 0.012 µF  153 0.015 µF 183 0.018 µF 223 0.022 µF 273 0.027 µF 333 0.033 µF 393 0.039 µF 473 0.047 µF 563 0.056 µF

VJ C0G (NP0) Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications Vishay Vitramon Document Number: 45053 For technical questions, contact: mlcc@vishay.com www.vishay.com Revision: 28-Aug-08 41 Note: (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034  Plastic tape SELECTION CHART STYLE VJ1808 (1) VJ1812 (1) VJ1825 (1) VJ2220 (1) VJ2225 (1) EIA TYPE - 1812 1825 - - VOLTAGE (Vdc) 50 100 200 500 1000 50 100 200 500 1000 50 100 200 500 50 100 200 500 1000 50 100 200 500 CAP. CODE CAP. 1R0 1.0 pF 1R2 1.2 pF 1R5 1.5 pF 1R8 1.8 pF 2R2 2.2 pF 2R7 2.7 pF 3R3 3.3 pF 3R9 3.9 pF 4R7 4.7 pF 5R6 5.6 pF 6R8 6.8 pF 8R2 8.2 pF 100 10 pF   120 12 pF   150 15 pF   180 18 pF    220 22 pF    270 27 pF    330 33 pF    390 39 pF    470 47 pF    560 56 pF    680 68 pF     820 82 pF     393 0.039 µF     473 0.047 µF  563 0.056 µF 

www.vishay.com For technical ques tions, contact: mlcc@vishay.com Document Number: 45053 VJ C0G (NP0) Dielectric Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS - 75 - 50 - 25 0 50 100 125 2.0 1.5 1.0 0.5 0.0 - 0.5 - 1.0 - 1.5 - 2.0 NP0 TEMPERATURE ° C 150 17525 75 TEMPERATURE COEFFICIENT OF CAPACITANCE TYPICAL PARAMETER C0G (NP0) % CAPACITANCE CHANGE 0 1 02 0 3 0 4 05 0 6 07 0 809 0 1 0 0 0.2 0.1 0.0 - 0.1 - 0.2 DC VOLTS APPLIED VOLTAGE COEFFICIENT OF CAPACITANCE TYPICAL PARAMETER C0G (NP0) % CAPACITANCE CHANGE AGING RATE HOURS 1 10 100 1000 10 000 0.2 0.1 0.0 - 0.1 - 0.2 TYPICAL PARAMETER C0G (NP0) % CAPACITANCE CHANGE TEMPERATURE °C MINIMUM INSULATION RESISTANCE VS. TEMPERATURE 10 25 100 150 10 000 1000 100 10 (ΩF) TYPICAL PARAMETER C0G (NP0) INSULATION RESISTANCE CHANGE OF CAPACITANCE WITH FREQUENCY FREQUENCY 1 kHz 10 kHz 100 kHz 1 MHz TYPICAL PARAMETER C0G (NP0) % CAPACITANCE CHANGE CHANGE OF CAPACITANCE WITH FREQUENCY FREQUENCY 1 kHz 10 kHz 100 kHz 1 MHz 0.00025DISSIPATION FACTOR 0.0005 0.001 TYPICAL PARAMETER C0G (NP0)

Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1 Disclaimer Legal Disclaimer Notice Vishay All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all li ability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permit ted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.