VHK150W_V01 CUI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

cui.com date 09/07/2021 page 1 of 8 SERIES: VHK150W │ DESCRIPTION: DC-DC CONVERTER date page 1 of 8

FEATURES

  • up to 150 W isolated output
  • rugged metal enclosure with integrated heat sink
  • 4:1 input range (9~36 Vdc, 18~75 Vdc)
  • single output from 5~48 Vdc
  • 1,500 Vdc isolation
  • over current, over temperature, over voltage, and short circuit protections
  • remote on/off
  • efficiency up to 90% PART NUMBER KEY MODEL input voltage output voltage output current output power ripple and noise1 efficiency range (Vdc) (Vdc) max (A) max (W) max (mVp-p) typ (%) VHK150W-Q24-S5 9 ~ 36 5 25 125 100 87 VHK150W-Q24-S12 9 ~ 36 12 12.5 150 150 86 VHK150W-Q24-S15 9 ~ 36 15 10 150 150 86 VHK150W-Q24-S24 9 ~ 36 24 6.5 156 240 86.5 VHK150W-Q24-S28 9 ~ 36 28 5.4 150 280 87 VHK150W-Q24-S48 9 ~ 36 48 3.12 150 480 84 VHK150W-Q48-S5 18 ~ 75 5 25 125 100 90 VHK150W-Q48-S12 18 ~ 75 12 12.5 150 150 88 VHK150W-Q48-S15 18 ~ 75 15 10 150 150 88 VHK150W-Q48-S24 18 ~ 75 24 6.5 156 240 87.5 VHK150W-Q48-S28 18 ~ 75 28 5.4 150 280 89 VHK150W-Q48-S48 18 ~ 75 48 3.12 150 480 87 Note: 1. Ripple and noise are measured at full load, 20 MHz BW with 10µF tantalum capacitor and 1µF ceramic capacitor across output. VHK150W - QXX - SXX X Input Voltage Output VoltageBase Number Remote On/Off Control "blank" = positive logic N = negative logic Additional Resources: Product Page | 3D Model

cui.com CUI Inc │ SERIES: VHK150W │ DESCRIPTION: DC-DC CONVERTER date 09/07/2021 │ page 2 of 8 INPUT parameter conditions/description min typ max units operating input voltage 24 Vdc input models

48 Vdc input models

24 Vdc input power up

8.8 Vdc Vdc

48 Vdc input power up

models ON (>3.5 Vdc or open circuit) models OFF (0~1.8 Vdc) negative logic models ON (0~1.8 Vdc) models OFF (>3.5 Vdc or open circuit) filter pi filter input fuse 30A time delay fuse for 24 Vin models, 15A time delay fuse for 48 Vin models Note: 1. Open collector refer to -Vin OUTPUT parameter conditions/description min typ max units maximum capacitive load

5 V output models

12 V output models

15 V output models

24 V input, 24 & 28 V output models

48 V input, 24 & 28 V output models

48 V output models 47

30,000 12,500 10,000 1,800 2,200 1,000 μF μF μF μF μF μF line regulation2 measured from high line to low line ±0.2 % load regulation2 measured from full load to zero load ±0.2 % voltage accuracy2 ±1.5 % adjustability ±10 % switching frequency 250 kHz transient response 25% step load change 500 µs temperature coefficient ±0.03 %/°C Note: 2. A 47 μF aluminum capacitor is required on the output for 48 Vdc output models. PROTECTIONS parameter conditions/description min typ max units short circuit protection continuous over current protection % nominal output current 110 140 % over voltage protection 115 140 % over temperature protection shutdown 110 °C SAFETY AND COMPLIANCE parameter conditions/description min typ max units isolation voltage for 1 minute: input to output; input to case; output to case 1,500 Vdc isolation resistance 10 MΩ RoHS 2011/65/EU (CE) ENVIRONMENTAL parameter conditions/description min typ max units operating temperature see derating curve -40 85 °C storage temperature -55 105 °C Additional Resources: Product Page | 3D Model

cui.com CUI Inc │ SERIES: VHK150W │ DESCRIPTION: DC-DC CONVERTER date 09/07/2021 │ page 3 of 8 2.76[70.0] 4.006[101.76] 4.09[104.0] 4.23[107.5] 3.58[91.0] Jumper1.50[38.0] MECHANICAL parameter conditions/description min typ max units case material steel and aluminum extrusion weight 502 g MECHANICAL DRAWING PIN CONNECTIONS PIN FUNCTION 1 -Vo 2 -S 3 trim 4 +S 5 +Vo 6 case 7 on/off 8 -Vin 9 +Vin units: inch[mm] tolerance: X.XX = ±0.02[±0.5] wire range: 22~12 AWG screw size: #6-32 Additional Resources: Product Page | 3D Model

cui.com CUI Inc │ SERIES: VHK150W │ DESCRIPTION: DC-DC CONVERTER date 09/07/2021 │ page 4 of 8 DERATING CURVES Figure 1 Table 1 External Components TEST CONFIGURATION Note: Input reflected-ripple current is measured with an inductor L1 and Capacitor C1 to simulate source impedance.

24 Vdc input models

L1 1.2μH C1 220μF, ESR < 0.1Ω at 100 KHz Cin 330μF, ESR < 0.7Ω at 100 KHz L1 12μH C1 220μF, ESR < 0.1Ω at 100 KHz Cin 33μF, ESR < 0.7Ω at 100 KHz Additional Resources: Product Page | 3D Model

cui.com CUI Inc │ SERIES: VHK150W │ DESCRIPTION: DC-DC CONVERTER date 09/07/2021 │ page 5 of 8 Figure 2 Recommended Circuit for EN55022 Class A EMC RECOMMENDED CIRCUITS Table 2 Class A Recommended Components Model C11 C21 C32 C42 C52 C62 L1 L2 VHK150W-Q24-S5 100 μF/50 V 100 μF/50 V NC NC NC NC SHORT 0.5 mH VHK150W-Q24-S12 100 μF/50 V 100 μF/50 V NC NC NC NC SHORT 0.5 mH VHK150W-Q24-S15 100 μF/50 V 100 μF/50 V NC NC NC NC SHORT 0.5 mH VHK150W-Q24-S24 100 μF/50 V 100 μF/50 V 680 pF 680 pF 470 pF 680 pF SHORT 0.5 mH VHK150W-Q24-S28 100 μF/50 V 100 μF/50 V 2200 pF NC 680 pF 2200 pF SHORT 0.6 mH VHK150W-Q24-S48 100 μF/50 V 100 μF/50 V 1000 pF NC 470 pF 1000 pF SHORT 0.6 mH VHK150W-Q48-S5 47 μF/100 V 47 μF/100 V NC NC NC NC SHORT 0.5 mH VHK150W-Q48-S12 47 μF/100 V 47 μF/100 V NC 680 pF NC NC SHORT 0.5 mH VHK150W-Q48-S15 47 μF/100 V 47 μF/100 V 680 pF 1000 pF NC NC SHORT 0.5 mH VHK150W-Q48-S24 47 μF/100 V 47 μF/100 V 680 pF 680 pF 470 pF 680 pF SHORT 0.5 mH VHK150W-Q48-S28 47 μF/100 V 47 μF/100 V 2200 pF NC 680 pF 2200 pF SHORT 0.6 mH VHK150W-Q48-S48 47 μF/100 V 47 μF/100 V 2200 pF 1500 pF 1500 pF 2200 pF SHORT 0.5 mH EN55022 CLASS A Notes: 1. Aluminum capacitor 2. Ceramic capacitor Additional Resources: Product Page | 3D Model

cui.com CUI Inc │ SERIES: VHK150W │ DESCRIPTION: DC-DC CONVERTER date 09/07/2021 │ page 6 of 8 EMC RECOMMENDED CIRCUITS (CONTINUED) Figure 3 Recommended Circuit for EN55022 Class B EN55022 CLASS B Table 3 Class B Recommended Components Model C11 C21 C32 C42 C52 C62 C72 C82 L1 L2 VHK150W-Q24-S5 220 μF/50 V 220 μF/50 V 680 pF NC NC NC NC NC 3 μH 0.5 mH VHK150W-Q24-S12 220 μF/50 V 220 μF/50 V 680 pF 680 pF NC NC NC NC 3 μH 0.5 mH VHK150W-Q24-S15 220 μF/50 V 220 μF/50 V 680 pF NC NC NC NC NC 3 μH 0.5 mH VHK150W-Q24-S24 220 μF/50 V 220 μF/50 V 1000 pF 1000 pF 470 pF 680 pF 470 pF 330 pF 3 μH 0.5 mH VHK150W-Q24-S28 220 μF/50 V 220 μF/50 V 2200 pF x2 1000 pF 470 pF 2200 pF x2 470 pF 470 pF 3.4 μH 0.6 mH VHK150W-Q24-S48 220 μF/50 V 220 μF/50 V 2200 pF x4 1000 pF 1000 pF 2200 pF x4 NC NC 3.4 μH 0.6 mH VHK150W-Q48-S5 120 μF/100 V 120 μF/100 V NC 680 pF NC NC NC NC 3 μH 0.5 mH VHK150W-Q48-S12 120 μF/100 V 120 μF/100 V NC 680 pF NC NC NC NC 3 μH 0.5 mH VHK150W-Q48-S15 120 μF/100 V 120 μF/100 V 1000 pF 1000 pF 470 pF 1000 pF 330 pF 680 pF 3 μH 0.5 mH VHK150W-Q48-S24 120 μF/100 V 120 μF/100 V 1000 pF 1000 pF 470 pF 1000 pF 330 pF 680 pF 3 μH 0.5 mH VHK150W-Q48-S28 120 μF/100 V 120 μF/100 V 1000 pF 1000 pF 470 pF 1000 pF 470 pF 470 pF 3.4 μH 0.6 mH VHK150W-Q48-S48 82 μF/100 V 120 μF/100 V 2200 pF + 470 pF 1500 pF 1000 pF 2200 pF + 470 pF NC NC SHORT 0.5 mH Notes: 1. Aluminum capacitor 2. Ceramic capacitor Additional Resources: Product Page | 3D Model

cui.com CUI Inc │ SERIES: VHK150W │ DESCRIPTION: DC-DC CONVERTER date 09/07/2021 │ page 7 of 8 APPLICATION NOTES 1. Output Voltage Trimming Leave open if not used. Table 4 Vout (Vdc) (kΩ) (kΩ) (kΩ) Vr (V) Vf (V) 5 2.32 3.3 0 2.5 0 12 9.1 51 5.1 2.5 0.46 15 12 56 8.25 2.5 0.46 24 20 100 7.5 2.5 0.46 28 23.7 150 6.2 2.6 0.64 48 36 270 5.1 2.5 0.46 R2 + R3 R1(Vr - Vf ( )) Rtrim - up = ( ) - (kΩ) Rtrim - down = - R2 (kΩ) Vo - Vo, nom R2 + R3 R1(Vo - Vr) Vo, nom - Vo R2R3 Figure 4 Formula for Trim ResistorApplication Circuit for Trim pin Note: 1. All specifications are measured at Ta=25°C, nominal input voltage and full output load unless otherwise specified. Note: Rtrim-up is the external resistor in kΩ Rtrim-down is the external resistor in kΩ VO, nom is the nominal output voltage VO is the desired output voltage R1, R2, R3, and Vr are internal (see Table 4). Additional Resources: Product Page | 3D Model

CUI Inc │ SERIES: VHK150W │ DESCRIPTION: DC-DC CONVERTER date 09/07/2021 │ page 8 of 8 CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com rev. description date 1.0 initial release 10/11/2006 1.01 new template applied 12/21/2011 1.02 misc. updates and corrections 03/13/2012 1.03 updated mechanical drawing 03/27/2012

1.04 V-Infinity branding removed 09/06/2012

1.05 added 28 V output models 11/05/2012 1.06 misc. updates, added 5 V output models for both 24 and 48 V inputs 11/16/2012 1.07 updated spec 03/14/2013 1.08 added trimming and EMI information 12/17/2013 1.09 updated spec 01/05/2015 1.10 updated derating curves 06/18/2015 1.11 company logo updated 02/08/2021 1.12 derating curve and circuit figures updated 09/07/2021 The revision history provided is for informational purposes only and is believed to be accurate.

REVISION HISTORY

Additional Resources: Product Page | 3D Model