DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 21
Technical content
Page 1 of 7 ASC_VH0201 Green Series- V04 Aug.2018 MULTILAYER CHIP VARISTOR For ESD Protection at High Speed Application VH0201 Green Material Series– RoHS Compliance *Contents in this sheet are subject to change without prior notice.
Page 2 of 7 ASC_VH0201 Green Series- V04 Aug.2018
DESCRIPTION
Walsin Multilayer Chip Varistor is a family of Transient Voltage Surge Suppression products.Today , electronic circuits are becoming smaller and more sentive to external interference. Walsin Multilayer Chip Varistor is designed to protect components from destruction of transients and ESD(Electronic Static Discharge). The wide operating voltage and energy rage make Walsin Multilayer Chip Varistor suitable for numerous applications on I/O protection , Vcc protectiion , Keyboard protection , LCD protection , Sensor protection…etc. The Walsin Chip Varistor is manufactured by Multilayer fabrication technology providing excellent voltage clamping ability and is supplied in leadless , surface mount form , compatible with modern reflow and wave soldering procedures.
FEATURES
- Multilayer fabrication technology 2. - 40℃to 125℃ operating temperature Range 3. Operating voltage range V M(DC) at 5V ~ 24V 4. Able to withstand ESD test of IEC- 61000-4-2 5. Bi-directional clamping characteristic
APPLICATIONS
- Protection of cellular phones, PDA, High Speed Data Lin e…etc. 2. ESD Protection for components sensitive to IEC 61000-4-2, Provides Circuit Board Transient Voltage Protection for Transistors. 3. Protection of Video & Audio Ports. DIMENSIONS Figure Symbol VH0201 Series L 0.60 ± 0.05 mm W 0.30 ± 0.05 mm T 0.30 ± 0.05 mm Ts 0.2 ± 0.1 mm *Terminal electrode：Ag / Ni / Sn electrode
Page 3 of 7 ASC_VH0201 Green Series- V04 Aug.2018 DEVICE RATING AND SPECIFICATIONS WTC Part Number Working Voltage Varistor voltage(*1) Clamping voltage(*2) Cap. Value(*3) VDC(max) Vv Vclamp(max) pF(typ) VH0201M050CGT330N 5.5 8~14 28 33 VH0201M050CGT470N 5.5 8~14 26 47 VH0201M050CGT640N 5.5 8~14 26 64 Notes: *1 The varistor voltage was measured at 1 mA current *2 The Clampong voltage was measured at 8*20 us standard current. *3 The capacitance was measured at 1 MHz. *4 The Leakage current was measured at working voltage. *3 The components shall be employed within 1 year, in the nitrogen condition.
Page 4 of 7 ASC_VH0201 Green Series- V04 Aug.2018 Enviromental Reliability Test Characteristic Test method and description High Temperature Storage The specimen shall subjected to 125 ± 2 ℃ for 1000 ± 12hours in a thermostatic bath without load and then stored at room temperature and humidity for 1 to 2 hours. The change of varistor voltage shall be within 10 ％ Temperature Cycle The temperature cycle of specified temperature shall be repeated five times and then stored at room temperature and humidity fir one or two hours. The change of varistor voltage shall be within 10 ％ and mechanical damage shall be examined. Step Temperature Period 1 -40 ± 3 ℃ 30Min ±3
2 Room Temperature 1~2 hours
3 125 ± 2 ℃ 30Min ±3
4 Room Temperature 1~2 hours
After being continuously applied the maximum allowable voltage at 85 ± 2 ℃ for 1000 ± 2hours, the specimen shall be stored at room temperature and humidity for one or two hours. The change of varistor voltage shall be within 10％ Damp Heat Load/ Humidity Load The specimen should be subjected to 40 ± 2 ℃, 90 to 95 ％ RH environment, and the maximum allowable voltage applied for 1000 hours, then stored at room temperature and humidity for one or two hours. The change varistor voltage shall be within 10 ％ Low Temperature Storage The specimen should be subjected to -40 ± 2 ℃, without load for 500 hours and then stored at room temperature for one or two hours. The change of varistor voltage shall be within 10 SOLDERING CONDITION 1. The IR reflow and temperature of Soldering for Pb free IR reflow Pb Free Process suggestion profile (1) The solder recommend is Sn96.5/Ag .5 of 120 to 150 μm (2) Ramp-up rate (217℃ to Peak)+3℃/second max (3) Temp. maintain at 175+/-25℃ 180 second max (4) Temp. maintain above 217℃ 60-150 seconds (5) Peak temperature range 245℃ +20℃/+10℃ time within 5℃ of actually peak temperature (tp) 10~20 seconds (6) Ramp down rate +6℃/second max. ※Perform adequate test in advance as the reflow temperature profile will vary according to the conditions of the manufacturing process, and the specification of the reflow furnace.
Page 5 of 7 ASC_VH0201 Green Series- V04 Aug.2018 2. Resistance to soldering heat-High Temperature Resistance:260℃, 10 sec-3times. 3. Hand Soldering In hand soldering of the Varistors. Large temperature gradient between preheated the Varistors and the tip of soldering iron may cause electrical failures and mechanical damages such s crackings or breakings of the devices. The soldering shall be carefully conditions for hand solding. 3-1 Recommended Soldering Condition 1 (1) Solder ： Rosin-based and non-activated flux is recommended. (2) Preheating The Varistors shall be preheated so that Temperature Gradient between the devices and the tip of soldering iron is 150℃ or below. (3) Soldering Iron Rated Power of 20w max with 3mm soldering tip in diameter. Temperature of soldering iron tip 380℃max,3-5sec ( The required amount of solder shall be melted in advance on the soldering tip.) (4) Cooling After soldering. The Varistors shall be cooled gradually at room ambient temperature. 3-2 Recommended Soldering Condition 2（Without preheating） (1) Solder iron tip shall not directly touch to ceramic dielectrics. (2) Solder iron tip shall be fully preheated before solderi ng while soldering iron tip to the external electrode of Varistors. 4. Post Soldering Cleaning 4-1 Residues of corrosive soldering fluxes on the PC board after cleaning may greatly have influences on the electrical characteristic and the reliability (such as humidity resistance)of the Varistors which have been mounted on the board. It shall be confirmed that the characteristic and the reliability of the devices are not affected by the applied cleaning conditions. 4-2 When an ultrasonic cleaning is applied to the mounted Varistors on PC Boards. Following conditions are recommended for preventing failures or damages of the devices due to the large vibration energy and the resonance caused by the ultrasonic waves (1) Frequency 29MHz max (2) Radiated Power 20w/lithr max (3) Period 5minuets max ORDERING CODE VH 0201 M 050 C G T 330 Type Code Chip Size Style Rated Voltage Control Code Termination Packing Capacitance Code (pF) Internal Code V: Walsin Varistor H: High Speed or RF 0201 0402 0603 Multilayer Array 050 = 5.5V 120 = 12V C: Capacitance control code for ESD protection varistor G:Green Material Reeled Bulk Two significant digits followed by number of zeros 2R5 = 2.5pF (when C< 10pF) 100 = 10 x 100 = 10pF 150 = 15 x 100 = 15pF 220 = 22 x 100 = 22pF 330 = 33 x 100 = 33pF 560 = 56 x 100 = 56pF 101 = 10 x 101 = 100pF Blank: None N: New item Minimum Ordering Quantity: 15000 pcs per reel.
Page 6 of 7 ASC_VH0201 Green Series- V04 Aug.2018 PACKAGING Paper Tape specifications (unit :mm) and Packaging quantity Series A B E F D Series P0 P1 T W Quantity/Reel Tape Material : Paper tape. Reel dimensions A B C Index A B C
Page 7 of 7 ASC_VH0201 Green Series- V04 Aug.2018 CAUTION OF HANDLING Limitation of Applications Please contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects, which might directly cause damage to the third party’s life, body or property. (1) Aircraft equipment (2) Aerospace equipment (3) Undersea equipment (4) Medical equipment (5) Traffic signal equipment (6) Applications of similar complexity and /or reli ability requirements to the applications listed in the above. Storage condition (1) Products should be used in 6 months from the day of WALSIN outgoing inspection, which can be confirmed. (2) Storage environment condition. Products should be storage in the warehouse on the following conditions. Temperature : -10 to +40C Humidity : 30 to 70% relative humidity Don’t keep products in corrosive gases such as sulfur. Ch lorine gas or acid or it may cause oxidization of electrode, resulting in poor solderability. Products should be storage on the palette for the prevention of the influence from humidity, dust and son on. Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on. Products should be storage under the airtight packaged condition.
Page 1 of 7 ASC_VH0402 Green Series- V22 Aug.2018 MULTILAYER CHIP VARISTOR For ESD Protection at High Speed Application VH0402 Green Material Series– RoHS Compliance *Contents in this sheet are subject to change without prior notice.
Page 2 of 7 ASC_VH0402 Green Series- V22 Aug.2018 Walsin Multilayer Chip Varistor is a family of Transient Voltage Surge Suppression products.Today , electronic circuits are becoming smaller and more sentive to external interference. Walsin Multilayer Chip Varistor is designed to protect components from destruction of transients and ESD(Electronic Static Discharge). The wide operating voltage and energy rage make Walsin Multilayer Chip Varistor suitable for numerous applications on I/O protection , Vcc protectiion , Keyboard protection , LCD protection , Sensor protection…etc. The Wa lsin Chip Varistor is manufactured by Multilayer fabrication technology providing excellent voltage clamping ability and is supplied in leadless , surface mount form , compatible with modern reflow and wave soldering procedures.
- Multilayer fabrication technology 2. -40℃to 125℃ operating temperature Range 3. Operating voltage range VM(DC) at 5V ~ 24V 4. Able to withstand ESD test of IEC-61000-4-2 5. Bi-directional clamping characteristic
- Protection of cellular phones, PDA, High Speed Data Line…etc. 2. ESD Protection for components sensitive to IEC 61000-4-2, Provides Circuit Board Transient Voltage Protection for Transistors. 3. Protection of Video & Audio Ports. DIMENSIONS Figure Symbol VH0402 Series L 0.96 ± 0.14 mm W 0.50 ± 0.10 mm T 0.50 ± 0.10 mm Ts 0.25 ± 0.15 mm *Terminal electrode：Ni / Sn electrode
Page 3 of 7 ASC_VH0402 Green Series- V22 Aug.2018 DEVICE RATING AND SPECIFICATIONS General Vairstor Part Number MAXIMUM RATINGS SPECIFICATIONS Max. Continuous Working Voltage Max. Claming Voltage at Specified Current (8/20μs) Nominal Voltage At 1mA (DC) Current Maximum Capacitance @1MHz VM(DC) Vc VN(DC)Min. VN(DC)Max. C (V) (V) (V) (V) (pF) % VH0402M050CGT100N 5.5 40 at 1A 11 21 10 ±30% VH0402M050CGT330N 5.5 38 at 1A 11 21 33 ±30% VH0402M050CGT470N 5.5 36 at 1A 9 19 47 ±30% VH0402M050CGT101N 5.5 35 at 1A 9 19 100 ±30% VH0402M050CGT181N 5.5 34 at 1A 8 18 180 ±30% VH0402M050CGT331N 5.5 32 at 1A 8 18 330 ±30% TANDARD TESTING CONDITION Unless otherwise specified Temperature：15 ~ 35C Humidity：25%RH ~ 85%RH Atmospheric pressure：86kPa ~ 106kPa
Page 4 of 7 ASC_VH0402 Green Series- V22 Aug.2018 Environment Reliability Test Characteristic Test method and description High Temperature Storage The specimen shall be subjected to 125 ± 2℃for 1000 ± 12 hours in a thermostatic bath without load and then stored at room temperature and normal humidity for 1 to 2 hours. The change of varistor voltage shall be within 10 ﹪ Temperature Cycle The temperature cycle of specified temperature shall be repeated five times and then stored at room temperature and normal humidity for one or two hours. The change of varistor voltage shall be within 10﹪and mechanical damage shall be examined. Step Temperature Period 1 -40±3℃ 30Min±3
2 Room Temperature 1 hour
3 125±3℃ 30Min±3
4 Room Temperature 1 hour
After being continuously applied the maximum allowable voltage at 85 ± 2℃ for 1000± 2 hours, the specimen shall be stored at room temperature and normal humidity for one or two hours, the change of varistor voltage shall be within 10﹪. Damp Heat Load/ Humidity Load The specimen should be subjected to 40 ± 2℃, 90 to 95 ﹪RH environment, and the maximum allowable voltage applied for 1000 hours, then stored at room temperature and normal humidity for one or two hours. The change of varistor voltage shall be within 10﹪ Low Temperature Storage The specimen should be subjected to -40 ± 2℃, without load for 500 hours and then stored at room temperature for one or two hours. The change of varistor voltage shall be within 10 ﹪ SOLDERING CONDITION 1. T he IR reflow and temperature of Soldering for Pb free IR reflow Pb Free Process suggestion profile (1) The solder recommend is Sn96.5/Ag 3.5 of 120 to 150μm (2) Ramp-up rate (217℃ to Peak) + 3℃/second max (3) Temp. maintain at 175 +/-25℃ 180 seconds max (4) Temp. maintain above 217 ℃ 60-150 seconds (5) Peak temperature range 245 ℃ +20 ℃/ -10 ℃ time within 5 ℃ of actually peak temperature (tp) 10~20 seconds (6) Ramp down rate +6 ℃/second max
Page 5 of 7 ASC_VH0402 Green Series- V22 Aug.2018 ※Perform adequate test in advance as the reflow temperature profile will vary according to the conditions of the manufacturing process, and the specification of the reflow furnace. 2. Resistance to soldering heat-High Temperature Resistance:260℃,10sec-3times. 3. Hand Soldering In hand soldering of the Varistors. Large temperature gradient between preheated the Varistors and the tip of soldering iron may cause electrical failures and mechanical damages such as crackings or breakings of the devices. The soldering shall be carefully controlled and carried out so that the temperature gradient is kept minimum with following recommended conditions for hand soldering. 3-1 Recommended Soldering Condition 1 (1) Solder ： Rosin-based and non-activated flux is recommended. (2) Preheating The Varistors shall be preheated so that Temperature Gradient between the devices and the tip of soldering iron is 150℃ or below. (3) Soldering Iron Rated Power of 20w max with 3mm soldering tip in diameter. Temperature of soldering iron tip 380℃max,3-5sec ( The required amount of solder shall be melted in advance on the soldering tip.) (4) Cooling After soldering. The Varistors shall be cooled gradually at room ambient temperature. 3-2 Recommended Soldering Condition 2（Without preheating） (1) Solder iron tip shall not directly touch to ceramic dielectrics. (2) Solder iron tip shall be fully preheated before solderi ng while soldering iron tip to the external electrode of Varistors. 4. Post Soldering Cleaning 4-1 Residues of corrosive soldering fluxes on the PC board after cleaning may greatly have influences on the electrical characteristic and the reliability (such as humidity resistance)of the Varistors which have been mounted on the board. It shall be confirmed that the characteristic and the reliability of the devices are not affected by the applied cleaning conditions. 4-2 When an ultrasonic cleaning is applied to the mounted Varistors on PC Boards. Following conditions are recommended for preventing failures or damages of the devices due to the large vibration energy and the resonance caused by the ultrasonic waves (1) Frequency 29MHz max (2) Radiated Power 20w/lithr max (3) Period 5minuets max ORDERING CODE General Vairstor VH 0402 M 050 C G T 330 Type Code Chip Size Style Rated Voltage Capacitance Tolerance Termination Packing Capacitance Code (pF) Internal Code Walsin Varistor High Speed or RF 0402 Multilayer Array 050 = 5.5V 120 = 12V 240 = 24V Capacitance control code for ESD protection varistor G: Green Material Reeled Bulk Two significant digits followed by number of zeros 2R5 = 2.5pF (when C< 10pF) 100 = 10 x 100 = 10pF 220 = 22 x 100 = 22pF 330 = 33 x 100 = 33pF 560 = 56 x 100 = 56pF 101 = 10 x 101 = 100pF Blank: None N: New item
Page 6 of 7 ASC_VH0402 Green Series- V22 Aug.2018 PACKAGING Paper Tape specifications (unit :mm) and Packaging quantity Series A B E F D Series P0 P1 T W Quantity/Reel Tape Material : Paper tape. Reel dimensions A B C Index A B C
Page 7 of 7 ASC_VH0402 Green Series- V22 Aug.2018 CAUTION OF HANDLING Limitation of Applications Please contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects, which might directly cause damage to the third party’s life, body or property. (1) Aircraft equipment (2) Aerospace equipment (3) Undersea equipment (4) Medical equipment (5) Traffic signal equipment (6) Applications of similar complexity and /or reliability requirements to the applications listed in the above. Storage condition (1) Products should be used in 6 months from the day of WALSIN outgoing inspection, which can be confirmed. (2) Storage environment condition. Products should be storage in the warehouse on the following conditions. Temperature : -10 to +40C Humidity : 30 to 70% relative humidity Don’t keep products in corrosive gases such as sulfur. Chlorine gas or acid or it may cause oxidization of electrode, resulting in poor solderability. Products should be storage on the palette for the prevention of the influence from humidity, dust and son on. Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on. Products should be storage under the airtight packaged condition.
Page 1 of 7 ASC_VH0603 Green Series- V08 Aug.2018 MULTILAYER CHIP VARISTOR For ESD Protection VH0603 Green Material Series – RoHS Compliance *Contents in this sheet are subject to change without prior notice.
Page 2 of 7 ASC_VH0603 Green Series- V08 Aug.2018 Walsin Multilayer Chip Varistor is a family of Transie nt Voltage Surge Suppression products.Today , electronic circuits are becoming smaller and more sentive to external interference. Walsin Multilayer Chip Varistor is designed to protect components from destruction of transients and ESD(Electronic Static Dis charge). The wide operating voltage and energy rage make Walsin Multilayer Chip Varistor suitable for numerous applications on I/O protection , Vcc protectiion , Keyboard protection , LCD protection , Sensor protection…etc. The Walsin Chip Varistor is manu factured by Multilayer fabrication technology providing excellent voltage clamping ability and is supplied in leadless , surface mount form , compatible with modern reflow and wave soldering procedures.
- Multilayer fabrication technology 2. -40℃to 125℃ operating temperature Range 3. Operating voltage range VM(DC) at 5V ~ 24V 4. Able to withstand ESD test of IEC-61000-4-2 5. Bi-directional clamping characteristic
- Protection of cellular phones, PDA, High Speed Data Line…etc. 2. ESD Protection for components sensitive to IEC 61000-4-2, Provides Circuit Board Transient Voltage Protection for Transistors. 3. Protection of Video & Audio Ports. DIMENSIONS Figure Symbol VHZ0603 Series L 1.60 ± 0.15 mm W 0.80 ± 0.15 mm T 0.90 ± 0.15 mm Ts 0.30 ± 0.20 mm *Terminal electrode：Ni / Sn electrode
Page 3 of 7 ASC_VH0603 Green Series- V08 Aug.2018 DEVICE RATING AND SPECIFICATIONS General Vairstor Part Number MAXIMUM RATINGS SPECIFICATIONS Max. Continuous Working Voltage Max. Clamping Voltage at Specified Current (8/20μs) Nominal Voltage At 1mA (DC) Current Typical Capacitance @1MHz VM(DC) Vc VN(DC)Min. VN(DC)Max. C (V) (V) (V) (V) (pF) % VH0603M050CGT100N 5.5 40 at 1A 11 21 10 ±30% VH0603M050CGT330N 5.5 38 at 1A 11 21 33 ±30% VH0603M050CGT470N 5.5 37 at 1A 9 19 47 ±30% VH0603M050CGT101N 5.5 36 at 1A 9 19 100 ±30% VH0603M050CGT331N 5.5 32 at 1A 8 18 330 ±30% VH0603M050CGT102N 5.5 30 at 1A 8 18 1000 ±30% VH0603M120CGT220N 12 46 at 1A 15 25 22 ±30% VH0603M120CGT151N 12 44 at 1A 15 25 150 ±30% VH0603M120CGT331N 12 42 at 1A 15 25 330 ±30% TANDARD TESTING CONDITION Unless otherwise specified Temperature：15 ~ 35C Humidity：25%RH ~ 85%RH Atmospheric pressure：86kPa ~ 106kPa
Page 4 of 7 ASC_VH0603 Green Series- V08 Aug.2018 Environment Reliability Test Characteristic Test method and description High Temperature Storage The specimen shall be subjected to 125 ± 2℃for 1000 ± 12 hours in a thermostatic bath without load and then stored at room temperature and normal humidity for 1 to 2 hours. The change of varistor voltage shall be within 10 ﹪ Temperature Cycle The temperature cycle of specified temperature shall be repeated five times and then stored at room temperature and normal humidity for one or two hours. The change of varistor voltage shall be within 10﹪and mechanical damage shall be examined. Step Temperature Period 1 -40±3℃ 30Min±3 3 125±3℃ 30Min±3 After being continuously applied the maximum allowable voltage at 85 ± 2℃ for 1000± 2 hours, the specimen shall be stored at room temperature and normal humidity for one or two hours, the change of varistor voltage shall be within 10﹪. Damp Heat Load/ Humidity Load The specimen should be subjected to 40 ± 2℃, 90 to 95 ﹪RH environment, and the maximum allowable voltage applied for 1000 hours, then stored at room temperature and normal humidity for one or two hours. The change of varistor voltage shall be within 10﹪ Low Temperature Storage The specimen should be subjected to -40 ± 2℃, without load for 500 hours and then stored at room temperature for one or two hours. The change of varistor voltage shall be within 10 ﹪ SOLDERING CONDITION 1. The IP reflow and temperature of Soldering for Pb free IR reflow Pb Free Process suggestion profile (1) The solder recommend is Sn96.5/Ag 3.5 of 120 to 150μm (2) Ramp-up rate (217℃ to Peak) + 3℃/second max (3) Temp. maintain at 175 +/-25℃ 180 seconds max (4) Temp. maintain above 217 ℃ 60-150 seconds (5) Peak temperature range 245 ℃ +20℃/ -10 ℃ time within 5 ℃ of actually peak temperature (tp) 10~20 seconds (6) Ramp down rate +6 ℃/second max
Page 5 of 7 ASC_VH0603 Green Series- V08 Aug.2018 ※Perform adequate test in advance as the reflow temperature profile will vary according to the conditions of the manufacturing process, and the specification of the reflow furnace. 2. Resistance to soldering heat-High Temperature Resistance:260℃,10sec-3times. 3. Hand Soldering In hand soldering of the Varistors. Large temperature gradient between preheated the Varistors and the tip of soldering iron may cause electrical failures and mechanical damages such as crackings or breakings of the devices. The soldering shall be carefully controlled and carried out so that the temperature gradient is kept minimum with following recommended conditions for hand soldering. 3-1 Recommended Soldering Condition 1 (1) Solder ： Rosin-based and non-activated flux is recommended. (2) Preheating The Varistors shall be preheated so that Temperature Gradient between the devices and the tip of soldering iron is 150℃ or below. (3) Soldering Iron Rated Power of 20w max with 3mm soldering tip in diameter. Temperature of soldering iron tip 380℃max,3-5sec ( The required amount of solder shall be melted in advance on the soldering tip.) (4) Cooling After soldering. The Varistors shall be cooled gradually at room ambient temperature. 3-2 Recommended Soldering Condition 2（Without preheating） (1) Solder iron tip shall not directly touch to ceramic dielectrics. (2) Solder iron tip shall be fully preheated before soldering while soldering iron tip to the exte rnal electrode of Varistors. 4. Post Soldering Cleaning 4-1 Residues of corrosive soldering fluxes on the PC board after cleaning may greatly have influences on the electrical characteristic and the reliability (such as humidity resistance)of the Varistors which have been mounted on the board. It shall be confirmed that the characteristic and the reliability of the devices are not affected by the applied cleaning conditions. 4-2 When an ultrasonic cleaning is applied to the mounted Varistors on PC Boards. Following conditions are recommended for preventing failures or damages of the devices due to the large vibration energy and the resonance caused by the ultrasonic waves (1)Frequency 29MHz max (2)Radiated Power 20w/lithr max (3)Period 5minuets max ORDERING CODE General Vairstor VH 0603 M 050 C G T 100 Type Code Chip Size Style Rated Voltage Capacitance Tolerance Termination Packing Capacitance Code (pF) Internal Code V: Walsin Varistor H: High Speed or RF 0603 M: Multilayer Array 050 = 5.5V 120 = 12V 240 = 24V C: Capacitance control code for ESD protection varistor G: Green Material Reeled Bulk Two significant digits followed by number of zeros 5R0 = 5pF (when C< 10pF) 100 = 10 x 100 = 15pF 220 = 22 x 100 = 22pF 330 = 33 x 100 = 33pF 101 = 10 x 101 = 100pF Blank: None N: New item
Page 6 of 7 ASC_VH0603 Green Series- V08 Aug.2018 PACKAGING Paper Tape specifications (unit :mm) and Packaging quantity Label A B E F D Label P0 P1 T W Quantity/Reel Tape Material : Paper tape. Reel dimensions A B C Index A B C
Page 7 of 7 ASC_VH0603 Green Series- V08 Aug.2018 CAUTION OF HANDLING Limitation of Applications Please contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects, which might directly cause damage to the third party’s life, body or property. (1) Aircraft equipment (2) Aerospace equipment (3) Undersea equipment (4) Medical equipment (5) Traffic signal equipment (6) Applications of similar complexity and /or reliability requirements to the applications listed in the above. Storage condition (1) Products should be used in 6 months from the day of WALSIN outgoing inspection, which can be confirmed. (2) Storage environment condition. Products should be storage in the warehouse on the following conditions. Temperature : -10 to +40C Humidity : 30 to 70% relative humidity Don’t keep products in corrosive gases such as sulfur. Ch lorine gas or acid or it may cause oxidization of electrode, resulting in poor solderability. Products should be storage on the palette for the prevention of the influence from humidity, dust and son on. Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on. Products should be storage under the airtight packaged condition.