VEW1147LS

VEW1147LS STANLEY | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

Features

SW lighting for car indicators, meter panel, car audio and heater control, etc… Page 1 ・Outer Dimension 3.6 x 2.8 x 1.9mm( L x W x H ) ・Wide operation temperature range. Storage Temperature : -40℃～110℃ Operating Temperature : -40℃～100℃ Operation Guarantee ・Spatial distribution characteristics. (2θ1/2 : 120deg) ・Corresponding to a use requiring high reliability in cars etc... ・Lead–free soldering compatible ・RoHS compliant Package Product features Chromaticity coordinates Spatial distribution Die materials Optical efficiency Rank grouping parameter Assembly method Soldering methods Taping and reel ESD Sorted by luminous intensity and chromaticity per rank taping Auto pick & place machine (Auto Mounter) 2,000pcs per reel in a 8mm width tape. (Standard) Reel diameter: 180mm 1kV (HBM) 120 deg. PLCC-2 Type, Diffused pale yellow resin VEW1147LS x = 0.31TYP., y = 0.32TYP. (Condition : IF=30mA) InGaN 40.4lm/W Reflow soldering and manual soldering PLCC-2 Type White LED 2006.10.30 (High Reliability type, White V-Series)

Color and Luminous Intensity Page 2 MIN. T Y P . I F TYP. I F VEW1147L S InGaN White Pale Yellow 1,000 1,500 30 4.0 30 Part No. M aterial E mitted Color Luminous Flux Iv (mcd) φv (lm) Lens Color Luminous Intensity VEW1147LS PLCC-2 Type White LED 2006.10.30 (High Reliability type, White V-Series) (Ta=25℃) ※Note : The above luminous intensity(Iv) is the setup values of the sorting machine. (Tolerance : IV… ±10%)

P ower Dis s ipation P d mW F orward Current I F mA Puls e F orward Current ※1 IFRM mA ⊿IF mA/℃ ⊿IFRM mA/℃ Revers e Voltage V R V Op erating Temperature Topr -40～+100 ℃ Storage Temperature T stg -40～+110 ℃ Derating (Ta=85℃ or higher) 4 Absolute M aximum RatingsItem S ymbol Unit 114 100 1.20 VEW1147LS PLCC-2 Type White LED 2006.10.30 (High Reliability type, White V-Series) (Ta=25℃) ※1 IFRM Measurement condition : Pulse Width≦1ms, Duty≦1/10 Thermal Characteristics Item Symbol Ratings Unit Ju n c t i o n Temperature (MAX.) Tj 110 ℃ Thermal Resistance (TYP.) (Junction/ ambient) R(th j-a) 230 ℃/Ｗ Thermal Res is tance (TYP.) (Junction/ Solder Point) R(th j-s) 90 ℃/Ｗ ※Rth(j-a) Measurement Condition / Substrate: FR4(t=1.6mm) Pattern Size: 16mm2.

Electro-Optical Characteristics Condition MIN. 2. 8 TYP. 3.3 MAX . 3. 8 Revers e Current V R=5V I R MAX . 100 μA Half Intens ity Angle I F=30mA 2 θ1/ 2 TYP. 120 deg. xT Y P . 0 . 3 1- yT Y P . 0 . 3 2- Characteris ticsItem S ymbol Unit VF V Chromaticity Coordinates IF=30mA Forward Voltage I F=30mA Page 4 VEW1147LS PLCC-2 Type White LED 2006.10.30 (High Reliability type, White V-Series) (Ta=25℃)

Rank IV（mcd） MIN. MA X . D1 1,000 1,200 D2 1,200 1,500 D3 1,500 1,800 D4 1,800 2,200 D5 2,200 2,700 Condition I F=30mA Intensity Tolerance each Rank : +/-10% VEW1147LS PLCC-2 Type White LED 2006.10.30 (High Reliability type, White V-Series) (Ta=25℃) ˞ Please contact our sales staff concerning rank designation.

Sorting Chart for Chromaticity Coordinates Page 6 Chromaticity Coordinates Tolerance Each Rank : +/-0.01 R a n k xy xy xy xy LEFT DOWN point LEFT UP point RIGHT UP point RIGHT UP point VEW1147LS PLCC-2 Type White LED Please contact our sales staff concerning rank designation. 2006.10.30 (High Reliability type, White V-Series)

(High Reliability type, White V-Series) Spatial Distribution Example Condition : Ta = 25℃ Spectral Distribution Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 30mA Wavelength [nm] Relative Intensity Forward Voltage vs. Forward Current Condition : Ta = -40℃～85℃ Forward Voltage VF(V) Forward Current IF(mA) Forward Current vs. Relative Intensity Condition : Ta = 25℃ Forward Current IF(mA) Relative Intensity 2007.8.31

Forward Current vs. Chromaticity Condition : Ta = 25℃ Ambient Temperature vs. Forward Voltage Condition : IF = 2mA～70mA Ambient Temperature : Ta(℃) Ambient Temperature vs. Relative Intensity Condition : IF= 30mA Ambient Temperature : Ta(℃) Derating Ambient Temperature vs. Maximum Forward Current Repetition Frequency : f ≧ 10Hz Ambient Temperature : Ta(℃) Page 8 VEW1147LS PLCC-2 Type White LED Technical Data (High Reliability type, White V-Series) Maximum Forward Current : IF MAX. (mA)Forward Voltage VF(V) Relative Intensityy x 2008.1.18

Duty Cycle vs. Maximum Forward Current Duty(%) Page 9 VEW1147LS PLCC-2 Type White LED Technical Data (High Reliability type, White V-Series) Ambient Temperature vs. Chromaticity Condition : IF = 30mA x y Maximum Forward Current : IF MAX. (mA) 2007.8.31

Recommended Soldering Pattern Page 10 (Unit: mm) Taping Specification (Unit: mm) (Unit: mm) ・Quantity: 2,000pcs/ reel (standard) VEW1147LS PLCC-2 Type White LED 2007.8.31 (High Reliability type, White V-Series) Weight: (39.0)mg

Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to room temperature after the first reflow) in order to prevent the LED resin from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. (6℃ maximum) Page11 VEW1147LS PLCC-2 Type White LED 2006.10.30 (High Reliability type, White V-Series) Manual Soldering Conditions Iron tip temp. Soldering time and frequency 3 s 1 time 350 (MAX.) (MAX.) (MAX.)

Reliability Testing Result Page12 Failure Criteria Reliability Testing Result Applicable Standard Testing Conditions Duration Failure Room Temp. Operating Life EI A J ED - 4701/100(101) Ta = 2 5℃, IF = 30mA 1,000 h 0/20 High Temp. Operating Life EI A J ED - 4701/100(101) Ta = 8 5℃ ,IF = 30mA 1,000 h 0/20 Low Temp. Operating Life EI A J ED - 4701/100(101) Ta = -4 0℃, IF = 30mA 1,000 h 0/20 Wet High Temp. Operating Life EI A J ED - 4701/100(102) Ta = 6 0℃, 90%, IF = 30mA 1,000 h 0/20 Wet High Temp. Storage Life EI A J ED - 4701/100(103) Ta = 6 0℃, 90% 1,000 h 0/20 Thermal Shock EI A J ED - 4701/100(105) Ta = -4 0℃ ～ 110℃ (each 15min.) 1,000 cycles 0/20 Thermal Shock Operating EI A J ED - 4701/100(105) Ta = -4 0℃(O FF) ～ 85℃(IF = 30mA ON) (each 15min.) 1,000 cycles 0/20 High Temp. Storage Life EI A J ED - 4701/200(201) T a = 110℃ 1,000 h 0/20 Low Temp. Storage Life EI A J ED - 4701/200(202) Ta = -4 0℃ 1,000 h 0/20 Cycled Temp. Humidity Operating Life EI A J ED - 4701/200(203) Ta = -3 0℃(2h) ～ 80℃, 95%(2h), 8h/ cycle IF = 30mA 5min on-off 30 cycles 0/ 20 Resistance to Reflow Soldering EI A J ED - 4701/300(301) Moisture S oak : 30℃, 70%, 168h Preheat : 150℃～180℃ (120s Max.) Soldering Temp. : 260℃ (5s) Twice 0/20 El ec t r i c St at i c Discharge (ESD)※1 EI A J ED - 4701/300(304) C = 100pF , R 2 = 1.5KΩ, ±2,000V once each polarity 0/20 Vibration, Variable Frequency EI A J ED - 4701/400(403) 98.1m/s (10G), 100 ～ 2KHz, 20min. XYZ each direction 2 h 0/20 Items Symbols Conditions Failure criteria Luminous Intensity Iv I F=30mA Testing M in. Value ＜ S pec. Min. Value x 0.5 Forward Voltage V F IF=30mA Testing M ax. Value ≧ Spec. M ax. Value x 1.2 Reverse Current I R VR=5V Testing M ax. Value ≧ Spec. M ax. Value x 2.5 Cosmetic Appearance - - Occurrence of notable decoloration, deformation and cracking VEW1147LS PLCC-2 Type White LED 2007.8.31 (High Reliability type, White V-Series) ※1 Reference test

Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet Page13 VEW1147LS PLCC-2 Type White LED (High Reliability type, White V-Series) 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2007.8.31