EMV14GT EUROQUARTZ | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE TCXO EMV14GT Series
DESCRIPTION
14 pin DIL hermetically-sealed package Wide frequency range: 27.0MHz to 200.0MHz Supply voltage 3.3 Volts Frequency stability from ±1ppm over -30 to +75°C RoHS compliant EMV14GT series TCXOs are packaged in a 14 pin DIL hermetically sealed package. With squarewave (CMOS) output, tolerances are available from ±1.0ppm over -30° to +75°C. The part has a 0.01mF decoupling capacitor built in. EMV14GT - OUTLINES AND DIMENSIONS Temp. Range (°C) 0 ~ +50 P P P P P P -10 ~ +60 ASK P P P P P -20 ~ +70 X P P P P P -30 ~ +75 X P P P P P -40 ~ +85 X X X ASK ASK P P = available, x = not available, ASK = call Technical Sales SPECIFICATION Product Series Code TCXO: EMV14GT VCTCXO: VEMV14GT Frequency Range: 27.0MHz to 200.0MHz Output Waveform: Squarewave, HCMOS Initial Calibration Tolerance Models without trimmer: <±2.0ppm Models with trimmer: <±1.0ppm Standard Frequencies: 30.0, 32.768, 38.880, 40.0, and 200.0MHz ( Partial list) Operating Temperature Range: See table Mechanical Frequency Tuning: ±3.0ppm minimum Frequency Stability vs. Ageing: ±1.0 ppm max. first year vs. Voltage Change: ±0.3 ppm max. ±5% change vs. Load Change: ±0.3 ppm max. ±10% change vs. Reflow (SMD type): ±1.0ppm max. for one reflow ( Measured after 24 hours) Supply Voltage: +3.3 Volts Output Logic Levels: Logic High: 90% Vdd min. Logic Low: 10% Vdd max. Current Consumption: 40mA maximum Rise and Fall Times: 10ns typical Duty Cycle: 50%±10% standard, Start-up Time: 5ms typical, 10ms max. Current Consumption: See table below Output Load: 15pF Storage Temperature: -55~+125°C PART NUMBERING SCHEDULE Example: EMV14GT33-200.00-2.5/-30+75 Supply Voltage 33 = 3.3 VDC Frequency (MHz) Stability over OTR (±ppm) Operating Temperature Range (OTR) (°C) Lower and upper limits Series Description TCXO = EMV14GT* VCTCXO = VEMV14GT Control Voltage: Standard = +1.5±1.0Volts for all input voltages. (Contact technical sales if +2.5±2.0 Volts is required.) Frequency Deviation: ±6.0 ppm min. (Vcon = +4.5V±1.0V) Slope Polarity: Positive (increase of control voltage increases output frequency.) Input Impedance: 2M minimum Modulation Bandwidth: 25kHz minimum Linearity: ±10% maximum VEMV14GT VOLTAGE CONTROL SPECIFICATION FREQUENCY STABILITY Offset 10Hz 100Hz 1kHz 10kHz 100kHz Part = EMV14GT33 at 77.760Mhz (dBc/Hz) -80 -110 -135 -130 -132 at 155.520Mhz (dBc/Hz) -80 -110 -125 -120 -125 SSB PHASE NOISE at 25°C * Note, 'G' indicates RoHS Compliant part HCMOS 14 pin DIL, 'V' Group