VESD05A6A-HAF VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Features

  • Ultra compact LLP75-7L package  6-line ESD-protection  Low leakage current I R < 0.1 µA  Low load capacitance C D = 13 pF  ESD-immunity acc. IEC 61000-4-2 ± 15 kV contact discharge ± 15 kV air discharge  Working voltage range V RWM = 5 V  e4 - precious metal (e .g. Ag, Au, NiPd, NiPdAu) (no Sn)  Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC Marking (example only) Dot = Pin 1 marking XX = Date code YY = Type code (see table below)

Ordering Information

** Please see document “Vishay Material Category Policy” www.vishay.com/doc?99902 21001 XX YY Device name Ordering code Taped units per reel (8 mm tape on 7" reel) Minimum order quantity VESD05A6A-HAF VESD05A6A-HAF-GS08 3000 15000 Device name Package name Type code Weight Molding compound flammability rating Moisture sensitivity level Soldering conditions VESD05A6A-HAF LLP75-7L AT 4.2 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals

www.vishay.com Document Number 81880 Rev. 1.2, 11-Jun-10 VESD05A6A-HAF Vishay Semiconductors For technical support, please contact: ESDprotection@vishay.com Absolute Maximum Ratings Application Note: a) With the VESD05A6A-HAF 6 different signal or data lines can be clamped to ground. Due to the different clamping levels in forward and reverse direction the VESD05A6A-HAF clamping behavior is Bidirectional and Asymmetrical (BiAs). b) If symmetrical clamping behaviour is required the VESD05A6A-HAF can also be used as a Bidirectional Symmetrical protection device protecting up to 5 lines. In this case pin no. 7 must not be connected. Rating Test condition Symbol Value Unit Peak pulse current BiAs-Mode: each input (pin 1 - pin 6) to ground (pin 2); acc. IEC 61000-4-5; tp = 8/20 µs; single shot IPPM 2.5 A BiSy-mode: each input (pin 1 - pin 6) to any other input pin. Pin 2 not connected. Acc. IEC 61000-4-5; tp = 8/20 µs; single shot IPPM 2.5 A Peak pulse power BiAs-mode: each input (pin 1 - pin 6) to ground (pin 2); acc. IEC 61000-4-5; tp = 8/20 µs; single shot PPP 33 W BiSy-mode: each input (pin 1 - pin 6) to any other input pin. Pin 2 not connected. Acc. IEC 61000-4-5; tp = 8/20 µs; single shot PPP 43 W ESD immunity Acc. IEC61000-4-2; 10 pulses BiAs-mode: each input (pin 1 - pin 6) to ground (pin 2) Contact discharge VESD ± 15 kV Air discharge VESD ± 15 kV Acc. IEC 61000-4-2 ; 10 pulses BiSy-mode: each input (pin 1 - pin 6) to any other input pin. Pin 2 not connected Contact discharge VESD ± 10 kV Air discharge VESD ± 10 kV Operating temperature Junction temperature TJ - 40 to + 125 °C Storage temperature TSTG - 55 to + 150 °C L6 19365 6 54 1 2 19366 6 54 1 2

Figure 3. Typical Capacitance CD vs. Reverse Voltage VR Figure 4. Typical Forward Current IF vs. Forward Voltage VF Figure 5. Typical Reverse Voltage VR vs. Reverse Current IR

19948 VR (V)

19949 VF (V)

19950 IR (µA)

Figure 6. Typical Clamping Voltage vs. Peak Pulse Current IPP Figure 7. Typical Clamping Performance at + 8 kV Contact Figure 8. Typical Clamping Performance at - 8 kV Contact

19951 IPP (A)

Figure 9. Typical max. Clamping Voltage at ESD Contact

Document Number: 91000 www.vishay.com Revision: 11-Mar-11 1 Disclaimer Legal Disclaimer Notice Vishay ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in gene ric applications. Such statements are not binding statements about the suitability of products for a partic ular application. It is the customer’s responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. Parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product co uld result in person al injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.