VEMI85AB-HGK_V01 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

www.vishay.com Vishay Semiconductors Rev. 1.6, 09-Jan-2019 1 Document Number: 81718 For technical questions, contact: EMIfilter@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 8-Channel EMI-Filter with ESD-Protection MARKING (example only) Dot = pin 1 marking Y = type code (see table below) XX = date code DESIGN SUPPORT TOOLS

FEATURES

  • Ultra compact LLP3313-17L package
  • Low package profile of 0.6 mm
  • 8-channel EMI-filter
  • Low leakage current
  • Line resistance R S = 100 
  • Typical cut off frequency f3dB = 130 MHz
  • ESD-protection acc. IEC 61000-4-2 ± 18 kV contact discharge ± 25 kV air discharge
  • e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn)
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 21840 20388 1 2 3 4 5 6 7 8 10111213141516 YYXX 20720 click logo to get started Available Models

ORDERING INFORMATION

DEVICE NAME ORDERING CODE TAPED UNITS PER REEL (8 mm TAPE ON 7" REEL) MINIMUM ORDER QUANTITY VEMI85AB-HGK VEMI85AB-HGK-GS08 3000 15 000 PACKAGE DATA DEVICE NAME PACKAGE NAME TYPE CODE WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS VEMI85AB-HGK LLP3313-17L 9U 7.4 mg UL 94 V-0 MSL level 1 (according J-STD-020) Peak temperature max. 260 °C ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Peak pulse current All I/O pin to pin 17; acc. IEC 61000-4-5; t p = 8/20 μs; single shot IPPM 4A ESD immunity Contact discharge acc. IEC 61000-4-2; 10 pulses VESD ± 18 kVAir discharge acc. IEC 61000-4-2; 10 pulses ± 25 Operating temperature Junction temperature T J -40 to +125 °C Storage temperature T STG -55 to +150 °C

www.vishay.com Vishay Semiconductors Rev. 1.6, 09-Jan-2019 2 Document Number: 81718 For technical questions, contact: EMIfilter@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 APPLICATION NOTE With the VEMI85AB-HGK 8 different signal or data lines can be filtered and clamped to ground. Due to the different clamping levels in forward and reverse direction the clamping behaviour is Bidirectional and Asymmetric (BiAs). The 8 independent EMI-filter are placed between pin 1 and pin 16, pin 2 and pin 15, pin 3 and pin 14, pin 4 and pin 13, pin 5 and pin 12, pin 6 and pin 11, pin 7 and pin 10 and pin 8 and pin 9. They all are connected to a common ground pin 17 on the backside of the package. The circuit diagram of one EMI-filter-channel shows two identica l Z-diodes at the input to ground and the output to ground. These Z-diodes are characterized by the breakthrough voltage level (V BR) and the diode capacitance (C D). Below the breakthrough voltage level the Z-diodes can be considered as capacitors. Togeth er with these capacitors and the line resistance RS between input and output the device works as a low pass filter. Low frequency signals (f < f 3dB) pass the filter while high frequency signals (f > f3dB) will be shorted to ground through the diode capacitances CD. Each filter is symmetrical so that both ports can be used as input or output. L1IN L1OUT L3IN L3OUT L2IN L2OUT L4IN L4OUT L5IN L5OUT L6IN L6OUT L7IN L7OUT L8IN L8OUT 20389 8 9 RS Out In GND (pin 17) CD 20390 CD CD

www.vishay.com Vishay Semiconductors Rev. 1.6, 09-Jan-2019 3 Document Number: 81718 For technical questions, contact: EMIfilter@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Fig. 1 - ESD Discharge Current Wave Form acc. IEC 61000-4-2 (330 /150 pF) Fig. 2 - 8/20 μs Peak Pulse Current Wave Form acc. IEC 61000-4-5 ELECTRICAL CHARACTERISTICS All inputs (pin 1, 2, 3, 4, 5, 6, 7, and 8) to ground (pin 17) (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITIONS/RE MARKS SYMBOL MIN. TYP. MAX. UNIT Protection paths Number of chan nels which can be protected N channel - - 8 channel Reverse stand off voltage Max. reverse working voltage V RWM --5 V Reverse voltage at I R = 1 μA V R 5--V Reverse current at V R = VRWM IR -0 . 2 51 μ A Reverse break down voltage at I R = 1 mA V BR 66 . 8- V Pos. clamping voltage at IPP = 1 A applied at the input, measured at the output; acc. IEC 61000-4-5 VC-out --7 V at IPP = IPPM = 4 A applied at the input, measured at the output; acc. IEC 61000-4-5 VC-out --8 V Neg. clamping voltage at IPP = -1 A applied at the input, measured at the output; acc. IEC 61000-4-5 VC-out -1.4 - - V at IPP = IPPM = -4 A applied at the input, measured at the output; acc. IEC 61000-4-5 VC-out -1.6 - - V Input capacitance at VR = 0 V; f = 1 MHz C IN -4 0 4 5 p F at VR = 2.5 V; f = 1 MHz C IN -2 4 2 8 p F ESD-clamping voltage at ± 18 kV ESD-pulse acc. IEC 61000-4-2 V CESD -7 . 5- V Line resistance Measured between input and output; IS = 10 mA RS 90 100 110  Cut-off frequency V IN = 0 V; measured in a 50  system f 3dB - 130 - MHz 0 % 20 % 40 % 60 % 80 % 100 % 120 % - 1 0 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Time (ns) Discharge Current IESD Rise time = 0.7 ns to 1 ns 53 % 27 % 20557 0 % 20 % 40 % 60 % 80 % 100 % 01 0 2 0 3 0 4 0 Time (µs) IPPM 20 µs to 50 % 8 µs to 100 % 20548

www.vishay.com Vishay Semiconductors Rev. 1.6, 09-Jan-2019 4 Document Number: 81718 For technical questions, contact: EMIfilter@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 3 - Typical Forward Current IF vs. Forward Voltage VF Fig. 4 - Typical Reverse Voltage VR vs. Reverse Current IR Fig. 5 - Typical Peak Clamping Voltage VC vs. Peak Pulse Current IPP Fig. 6 - Typical Input Capacitance CIN vs. Input Voltage VIN Fig. 7 - Typical Small Signal Transmission (S21) at ZO = 50  0.001 0.01 0.1 100 VF (V) IF (mA) 20726 0.01 0.1 1 10 100 1000 10 000 IR (µA) VR (V) 20727 01234 IPP (A) VC (V) 20728 Measured acc. IEC 61000-4-5 (8/20 µs - wave form) Input clamping voltage VC Output clamping voltage 01 23456 f = 1 MHz VIN (V) CIN (pF) 20725 - 40 - 35 - 30 - 25 - 20 - 15 - 10 1 10 100 1000 10 000 Frequency in MHz Transmission (S21) in dB VINPUT = 5 V VINPUT = 0 V VINPUT = 1 V VINPUT = 2 V Measured in a 50 Ω system 20724

www.vishay.com Vishay Semiconductors Rev. 1.6, 09-Jan-2019 5 Document Number: 81718 For technical questions, contact: EMIfilter@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PACKAGE DIMENSIONS in millimeters (inches): LLP3313-17L 20391 Document no.:S8-V-3906.04-003 (4) 3.35 (0.132) 3.25 (0.128) Pin 1 marking 0.05 (0.002) 0 (0.000) 0.152 (0.006) ref. 2.8 (0.110) ref. 0.3 (0.012) 0.24 (0.009) 0.17 (0.007) 2.65 (0.104) 2.55 (0.100) exp. DAP 0.6 (0.024) 0.5 (0.020) 1.4 (0.055) 1.3 (0.051) 0.45 (0.018) 0.35 (0.014) exp. DAP Solder resist mask Solder pad 2.6 (0.102) 0.4 (0.016) 0.15 (0.006) 0.4 (0.016) 0.2 (0.008) x 45° 0.42 (0.017) Created - Date: 28. August 2006 Rev. 1 - Date: 27. May 2008 Foot print recommendation:

www.vishay.com Vishay Revision: 01-Jan-2022 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED