VEMI255A-HS3 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

Features

  • Ultra compact LLP75 package  2-channel EMI-Filter + ESD-protection  Low leakage current  Line resistance of 50 Ohms  Typical cut-off frequency 100 MHz  ESD protection to IEC 61000-4-2 ± 30 kV (Air)  ESD protection to IEC 61000-4-2 ± 30 kV (Contact)  Lead (Pb)-free component  Component in accordance to RoHS 2002/95/EC and WEEE2002/96/EC Mechanical Data Case: LLP75-6A (plastic package). Non magnetic Molding Compound Flammability Rating: UL 94 V-0 Terminals: High temperature soldering guaranteed: 260 °C/10 sec. at terminals Weight: 5 mg Packaging Codes/Options: GS18 = 10 k per 13" reel (8 mm tape), 10 k/box GS08 = 3 k per 7" reel (8 mm tape), 15 k/box Marking: Square = Pin 1 marking “T1” = Type Code for VEMI255A-HS3 SD = Date Code (Example only) Absolute Maximum Ratings Ratings at 25 °C, ambient temperature unless otherwise specified Thermal Characteristics Ratings at 25 °C, ambient temperature unless otherwise specified

Electrical Characteristics

(TA = 25 °C unless otherwise specified) Parameter Symbol Value Unit ESD Air Discharge per IEC 61000-4-2 V ESD 30 kV ESD Contact Discharge per IEC 61000-4-2 V ESD 30 kV Parameter Symbol Value Unit Operating Temperature T J - 40 to + 125 °C Storage Temperature T STG - 55 to + 150 °C Parameter Test Conditions Synbol Min. Typ. Max. Unit Reverse Stand-Off Voltage at IR = 1 µA each Input to Pin 2 V RWM 5 V Max. Reverse current at V R = 5 V each Input to Pin 2 I R 1µ A SD

Figure 5. Typical Clamping Voltage vs. Peak Pulse Current IPP Measured acc. IEC 61000-4-5 (8/20µs - wave form). Surge pulse applied at the filter input.

www.vishay.com Document Number 84772 Rev. 1.2, 15-Aug-05 VEMI255A-HS3 Vishay Semiconductors Application Note: a) With the VEMI255A-HS3 2 different signal or data lines can be filtered and clamped to ground. Due to the different clamping levels in forward and reverse direction the clamping behavior is Bidirectional and Asym- metric (BiAs). The 2 independent EMI-Filter are placed between Pin 1 & Pin 6, and Pin 3 & Pin 4 They all are connected to the common ground Pin no. 2. Pin no. 5 is not connected. Each filter is symmetrical so that all ports (Pin 1, 3, 4 & 6) can be used as Input or Output. Circuit diagram of one EMI-Filter-Channel Each filter is symmetrical so that both ports can be used as Input or Output. 19420 L1IN L2IN L1OUT L2OUT 19500 19421 Output Input RS Ground C C 19467

Rev. 1.2, 15-Aug-05 Vishay Semiconductors www.vishay.com Package dimensions in mm (inches) 18058 ISO Method E Top View 1 (0.039) 0.6 (0.023) 0.5 (0.020) 0.25 (0.010) (6x) 1 (0.039) 0.25 (0.010) 0.7 (0.027) 0.15 (0.006) 1.6 (0.062) 1.6 (0.062) 123 654

www.vishay.com Document Number 84772 Rev. 1.2, 15-Aug-05 VESD05A8-HN2 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany

Document Number: 91000 www.vishay.com Revision: 08-Apr-05 1 Notice Specifications of the products displayed herein are subjec t to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.