EM32S EUROQUARTZ | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE TCXO Clipped Sinewave 3.2 x 2.5 x1.3mm SMD
DESCRIPTION
EM32 series TCXOs are ceramic SMD TCXOs packaged in an industry- standard, ultra-miniature 3.2 x 2.5mm package. This TCXO can be run from a supply voltage of 2.3 to 5.5 Volts. Close tolerances from ±1ppm over -30° to +75°C are available. The part can be produced as either a standard TCXO or a voltage-controlled TCXO (VCTCXO). Ultra-miniature SMD package 3.2 x 2.5 x 1.3mm Stability from ±1ppm over -30° to +75°C Supply Voltage from 2.3 Volts to 5.5 Volts Produced as TCXO or VCTCXO with EFC Readily customized SPECIFICATION Product Series Code TCXO: EM32S VCTCXO: VEM32S Frequency Range: 16.0MHz to 40.0MHz* Output Waveform: Clipped Sinewave Initial Calibration Tolerance**: <±1ppm at 25°C Standard Frequencies: 10.0, 12.80, 13.0, 14.40, and 19.68MHz (Partial list) Operating Temperature Range: See table Frequency Stability vs. Ageing: ±1.0 ppm max. first year vs. Voltage Change: ±0.3 ppm max. ±5% change vs. Load Change: ±0.3 ppm max. ±10% change vs. Reflow: ±1ppm max. for one reflow (Measured after 24 hours) Supply Voltage: +2.8, +3.0 or +5.0Volts ( Specify when ordering) Output Voltage Level: 0.8V p-p minimum Start-up Time: 2ms typical, 5ms max. Current Consumption: See table below Output Load: 10kOhm//10pF ±10% Harmonic Distortion: -10dB typical, -7dB max. SSB Phase Noise: See table Output Format: DC block, AC coupled Storage Temperature: -50° to +100°C EM32S - OUTLINES AND DIMENSIONS Temperature Range (°C) 0 ~ +50 ASK P P P P -10 ~ +60 x P P P P -20 ~ +70 x x P P P -30 ~ +75 x x x P PP -40 ~ +85 x x x x P P = available, x = not available, ASK = call Technical Sales FREQUENCY STABILITY VEM32S VOLTAGE CONTROL SPECIFICATION SSB Phase Noise at 25°C Offset (Hz) 10 100 1k 10k 100k EM32S 13MHz (dBc/Hz) -80 -115 -135 -148 -150 PART NUMBERING PROCEDURE Example: EM32S3-40.00-2.5/-30+75 Supply Voltage 28 = 2.8 VDC 3 = 3.0 VDC 5 = 5.0 VDC Frequency (MHz) Stability over OTR (±ppm) Operating Temperature Range (OTR) (°C) Lower and upper limits. PHASE NOISE Series Description TCXO = EM32S VCTCXO = VEM32S Control Voltage: Standard = +1.5±1.0Volts for all input voltages. (Contact technical sales if +2.5±2.0 Volts is required.) Frequency Deviation: ±6.0 ppm min. Slope Polarity: Positive (increase of control voltage increases output frequency.) Input Impedance: 1.0M min. Modulation Bandwidth: 3.0kHz min. measured at -3dB Linearity: 10% max. EM32S Series Supply Voltage Max Current Frequency Range 9.6 to 15MHz 1.5mA 15.01 to 26MHz 2.0mA 26.01 to 40MHz 2.5mA CURRENT CONSUMPTION * Note: The frequency range between 26MHz to 40MHz is only available for 2.8 Volt and 3.0 Volt supply voltages. ** Stability over temperature is measured from this initial frequency.