VED30 CUI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- 30W isolated output
- Efficiency to 84%
- 200KHz switching frequency
- 2:1 input range
- Six sided shield
- Remote ON/OFF control Model Input Output Output Input Current Number Voltage Voltage Current No Load Full Load Efficiency VED30-D12-S5 9-18VDC 5VDC 5000mA 30mA 2700mA 77% VED30-D12-S12 9-18VDC 12VDC 2500mA 30mA 3150mA 79% VED30-D12-S15 9-18VDC 15VDC 2000mA 30mA 3150mA 79% VED30-D12-D12 9-18VDC ±12VDC ±1250mA 35mA 3100mA 81% VED30-D12-D15 9-18VDC ±15VDC ±1000mA 35mA 3100mA 81% VED30-D12-T512 9-18VDC 5/±12VDC 3000/±625mA 35mA 3200mA 78% VED30-D12-T515 9-18VDC 5/±15VDC 3000/±500mA 35mA 3200mA 78% VED30-D12-T5125 9-18VDC +5/+12/-5VDC 3000/600/1000mA 35mA 2940mA 77% VED30-D24-S5 18-36VDC 5VDC 5000mA 30mA 1350mA 77% VED30-D24-S12 18-36VDC 12VDC 2500mA 30mA 1550mA 81% VED30-D24-S15 18-36VDC 15VDC 2000mA 30mA 1550mA 81% VED30-D24-D12 18-36VDC ±12VDC ±1250mA 30mA 1500mA 84% VED30-D24-D15 18-36VDC ±15VDC ±1000mA 30mA 1500mA 84% VED30-D24-T512 18-36VDC 5/±12VDC 3000/±625mA 30mA 1580mA 79% VED30-D24-T515 18-36VDC 5/±15VDC 3000/±500mA 30mA 1560mA 80% VED30-D24-T5125 18-36VDC +5/+12/-5VDC 3000/600/1000mA 30mA 1450mA 78% VED30-D48-S5 36-72VDC 5VDC 5000mA 15mA 670mA 78% VED30-D48-S12 36-72VDC 12VDC 2500mA 15mA 770mA 81% VED30-D48-S15 36-72VDC 15VDC 2000mA 15mA 770mA 81% VED30-D48-D12 36-72VDC ±12VDC ±1250mA 20mA 750mA 84% VED30-D48-D15 36-72VDC ±15VDC ±1000mA 20mA 750mA 84% VED30-D48-T512 36-72VDC 5/±12VDC 3000/±625mA 20mA 790mA 79% VED30-D48-T515 36-72VDC 5/±15VDC 3000/±500mA 20mA 780mA 80% VED30-D48-T5125 36-72VDC +5/+12/-5VDC 3000/600/1000mA 20mA 725mA 78%
VED30 Series DC-DC Converters Rev. 06-2006 V-Infinity, LLC, 20050 SW 112th Ave., Tualatin, OR 97062 www.v-infinity.com 1-866-372-1258 Input Input Voltage Range 12V: 9-18V 24V: 18-36V 48V: 36-72V Input Filter Pi Type Output Voltage Accuracy Single Output ±1.0% max. Dual +Output ±1.0% max. -Output ±3.0% max. Triple, 5V ±1.0% max. 12V/15V ±5.0% max. -5V ±2.0% max. Voltage Balence (Dual) ±1.0%max Transient Response: Single, 25% Step Load Change <500µ sec. Dual, FL-1/2±1% Error Band <500µ sec. External Trim Adj. Range ±10% Ripple & Noise 20MHz BW 10mV RMS., max 75mV p-p, max Temperature Coefficient ±0.02%/°C Short Circuit Protection Continuous Line Regulation 1 Single/Dual ±0.2% max. Triple ±1.0% max. Load Regulation 2 Single/Dual ±1.0% max. Triple ±5.0% max. General Specifications Efficiency see table Isolation Voltage 500VDC min. Isolation Resistance 10 9Ohm min. Switching Frequency 200KHz, Type Operating Temperature Range 25°C to +71°C Case Temperature 100°C max. Storage Temperature 55°C to +105°C Cooling Free air convection EMI/RFI Six Sided Continuous Shield Dimensions 2.56x3.0x0.83 inches (65x76.2x21.1mm) Case Material Black coated copper with non- conductive base NOTES: 1. Measured from high line to low line 2. Measured from full load to 1/4 load
VED30 Series DC-DC Converters Rev. 06-2006 V-Infinity, LLC, 20050 SW 112th Ave., Tualatin, OR 97062 www.v-infinity.com 1-866-372-1258 V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to a dvise customers to ver- ify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for custom er’s applications using V- Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s published specifications. Nothing will be covered outside of standard product warranty.