VE2201K0JS TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
TE Connectivity (TE) introduces its vitreous enamelled tubular power resistors (type VE series), designed for high load capacity at low dimensions and high durability. The VE range of wire wound tubular resistors are created for maximum power density (in free air) and coated with a durable vitreous enamel coating providing a reliable and resilient high-power solution. These resistors are available with solder lug terminations as standard, and different tube sizes for given power.
FEATURES
- Durable vitreous enamel coating
- High load capacity at small dimensions
- High power dissipation in free air
- Supplied with solder lug termination
APPLICATIONS
- Braking
- Capacitor charging & discharging
- In-rush limiting
- Electrical machinery VE15 VE25 VE45 VE70 VE90 VE130 VE220 VE300 VE400 VE500 Rated power @ 25°C (W) 15 25 45 70 90 130 220 300 400 500 Ohmic value minimum 1R0 1R0 2R0 2R7 3R6 4R7 5R1 6R8 10R 8R2 Ohmic value maximum 3K0 4K7 7K5 10K 22K 22K 22K 22K 22K 22K Maximum working voltage (V) 300 300 300 900 900 2500 2500 2500 2500 2500 Tolerance 5% Operating temperature -55°C to 300°C Temperature coefficient of resistance (TCR) <±120ppm/°C Resistor element Wire wound
ELECTRICAL CHARACTERISTICS
Note: Rated Continuous Working Voltage (RCWV) is determined by √(Rated Power X Resistance Value) or max. working voltage listed above, whichever is lower.
INDUSTRIAL / VITREOUS ENAMEL COATED POWER RESISTOR TYPE VE SERIES Vitreous Enamel Coated Power Resistor Type VE Series ENVIRONMENTAL CHARACTERISTICS Characteristics Condition Compliance Continuous power Rated power @ 25°C <350°C temperature on surface Insulation resistance Dry/normal @ 500V DC >100MΩ Maximum working voltage V=√(PxR) OR maximum working voltage listed above, whichever is lower - Maximum overload voltage 2.5 x rated voltage for 5 sec - Dielectric strength VE15-VE45 - 1.5kV for 60 sec No breakdownVE70-VE90 - 2.5kV for 60 sec VE130-VE500 - 5kV for 60 sec Short-time overload capability 5 x rated power for 5 sec. - Load life Rated wattage 1.5 hours ON - 1.5 hours OFF for 1000 hours - Solderability (where applicable) 350°C for up to 3 sec. 95% coverage 100 05 0 100 150 200 250 300 350 % RATED POWER AMBIENT TEMP (/zero.numeratorC) -55 DERATING CURVE DIMENSIONS (Unit:mm) Solder lug, tinned Screw type lug Faston type terminal End terminal
INDUSTRIAL / VITREOUS ENAMEL COATED POWER RESISTOR TYPE VE SERIES Vitreous Enamel Coated Power Resistor Type VE Series Type Rated Power (W) D (max) L ±1.6 H W P a c ±0.15 d g ±1.0 b ±0.2 Solder lug f min. Screw type lug f ±2.0 MARKING
- Company name or Logo
- TE series
- Resistance value
- Tolerance
- Date code (YYMM) PACKAGING Note: All dimensions are in mm. VE15 VE25 VE45 VE75 VE90 VE130 VE220 VE300 VE400 VE500 L 140 140 325 325 325 340 325 340 325 325 W 130 130 190 190 190 220 210 220 210 210 H 90 90 95 95 95 110 95 110 95 95 Qty per box 50 50 50 25 25 25 10 10 5 5 Unit gross weight (GR’s) 15 18 25 50 65 145 210 280 360 410 Box dimensions (mm) WITH MOUNTING BRACKETS VE130 3K3 J XXXX P SLOT W D
te.com ©2024 TE Connectivity Plc. Family of Companies. All Rights Reserved. TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks owned or licensed by the TE Connectivity Plc. family of companies. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any changes to the information contained herein without prior notice. TE Connectivity assumes only those obligations set forth in the terms and conditions for this product and shall in no event be liable for any incidental, indirect, or consequential damages arising out of the sale, resale, use, or misapplication of the product. TE expressly disclaims any implied warranties with respect to the information contained herein, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose. Dimensions, specifications and/or information contained herein are for reference purposes only and are subject to change without notice. Consult TE for the latest dimensions, specifications and/or information. Users of TE Connectivity products must make their own assessment as to whether the respective product is suitable for the respective desired application. 12/24 1773247-1 REV:A\` ED INDUSTRIAL / VITREOUS ENAMEL COATED POWER RESISTOR TYPE VE SERIES
ORDERING INFORMATION
VE Vitreous enamel coated power resistor Power Rating 15 15W 25 25W 45 45W 70 70W etc…. Resistor Value 1R0 1 ohm (1000mΩ) 10R 10 ohm (10Ω) 100R 100 ohm (100Ω) 1K0 1K (1000Ω) 10K 10K (10000Ω) Tolerance J 5% Mounting Style - No brackets B Mounting brackets Standard part is without bracket mounting. Bracket mounting option offered as on demand Terminals S Solder Lug F Faston type connector M Screw type Lug Standard part is with solder lug termination. Other termination options are offered as on demand.