VCP3003A CTS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

VCP3006X REV. A 03/26/07 CTS Electronic Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 http://www.ctscorp.com/

  • See WWW.CTSCORP.COM for product patent status. Electrical Specifications VCP3006X Specification Input frequency 77.76 MHz Output frequency 622.08 MHz Supply Voltage (±±±± 5%) 3.3V PECL input 400 mV min. Peak-to-peak PECL output Min. Max. Logic “ 0” 1.49V 1.68V Logic “ 1” 2.28V 2.42V Output Duty Cycle 45/55% max Current Drain 95 Ma max. Operating Temperature -40 to 85°C Input frequency tracking capability +/- 32 ppm minimum Peaking < 0.1 dB Jitter attenuation > 4 dB @ 1 KHz offset > 12 dB @ 5 kHz offset RMS phase jitter generation (50kHz to 80 MHz) < 1 psec max. Model VCP3006X Frequency Translator Features:
  • 622.08 MHz SAW-based LVPECL output
  • RoHS Compliant
  • Low Profile Surface Mount Package
  • Excellent solder reflow performance
  • PCB Substrate for excellent TCE match
  • Non-Peaking Attenuation Response Description and applications: Surface mount 15.9 mm SQ frequency translator operating at a 3.3V supply with complementary LVPECL outputs for use in telecom & datacom VCP3006X 622 M CTS 07XX

VCP3006X REV. A 03/26/07 CTS Electronic Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 http://www.ctscorp.com/ VCP3006X Mechanical Dimensions (mm): 15.9mm x 15.9mm x 3.1 mm (max.): All dimensions are in MM [Inches]. All dimensions are nominal unless otherwise specified. Lead Termination Finish: Gold Flash, <10 micro inch, over Ni plated Cu. 15.9±0.1 [.625±.004] 15.9±0.1 [.625±.004] 3.1 [.122] MAX THIRD ANGLE PROJECTION 2.54 [.100] 1.02 [.040] 1.7 [.067] 17.60 [.693] 12.75 [.502] 1.19 [.047] 2.54 [.100] 17.60 [.693] 13.18 [.519] 6.98 [.275] 3.49 [.137] 2.79 [.110] TYP TYP TYP 1.14 [.045] 6.98 [.275] 2.62 [.103] TYP TYP TYP TYP TYP PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 12 PIN 11 PIN 10 PIN 9 PIN 8 Recommended Land Pattern CL CL CL CL Package outline Pin #1 mark Ø0.51[.020] 10 places HATCHING INDICATES BARRIER COATING OVER RESIST MASK OVER GROUND PLANE 0.76 [.030] PIN 13PIN 14 PIN 7PIN 6 0.25 [.010] VCP3006X 622 M CTS 07XX

VCP3006X REV. A 03/26/07 CTS Electronic Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 http://www.ctscorp.com/ VCP3006X PIN OUT Pin Symbol Function

1 LD Lock detect

Logic “ 1” indicates a locked condition (CMOS level >Vdd-.04) Logic “ 0” indicates that no input signal is present or the input signal has moved out of the lock range (CMOS Level <0.4V)

2 IN Input frequency

3 /IN NC: not connected internally

4 GND Ground

5 E/D Enable/ disable

Logic “ 0” = output disabled (CMOS Level < 0.4V) Logic “ 1” = output enabled (CMOS Level > Vdd-0.4 V)

6 Gnd Ground

7 Gnd Ground

8 /OUT Complementary output

9 OUT Output

10 Vcc Power supply voltage

11 N/C No connection

12 Gnd Ground

13 Gnd Ground

14 Gnd Ground

VCP3006X REV. A 03/26/07 CTS Electronic Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 http://www.ctscorp.com/ VCP3006X Tape & Reel Information Tape width 24 mm, pitch 20 mm, as per EIA 481-2, 1000 units per reel max Environmental Limits: Storage Temperature -40 to +90 °°°°C. Humidity 95% Relative humidity max @ 70°°°°C. Vibration 10 to 60 Hz with double amplitude of 1.52mm max. (1/2 hour in each of 3 perpendicular planes). Mechanical Shock 1/2 sine pulse, 3000G, with pulse width 0.3mSec. (3 shock in each of 6 directions of 3 perpendicular planes).

VCP3006X REV. A 03/26/07 CTS Electronic Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 http://www.ctscorp.com/ VCP3006X Solder Reflow Conditions Device is capable of withstanding reflow of 260 degrees C for 10 seconds maximum. Moisture Sensitivity: MSL 1 RoHS: This device is fully compliant to RoHS Directive 2002/95/EC