VCHW1154LDSE-3C9L4-TR STANLEY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 25
Technical content
Features
Product features ・High reliability (for automotive applications and other high-reliability required applications) ・Lead–free soldering compatible ・RoHS compliant ・Automotive interior: switches and buttons, meter panels, car audio, climate control, etc. Page 1 2017.9.22
Unit :mm Weight :33mg Tolerance :±0.2 Outline Dimensions Recommended Pad Unit：mm NO. PART NAME REMARKS QTY. ① LED Die InGaN 1 ② Lamp Housing White Resin 1 ③ Terminal Au/Pd Plating 2 ④ Encapsulant Silcorn Resin 1 ⑤ Protection Diode Si 1 Page 2 2017.9.22 Note.） ※１：The cutting burr size of the substrate and pin isn't contained in the size of the height of the product. ※２：Please note no short-circuit when the wiring pattern is arranged between the soldering attachment pad.
TYP. 250 120 MAX. 120 Thermal Resistance 【Junction - Ambient 】 Rth(j-a) IF Derate Linearly from "85℃" Note3 ℃/W Note3 Thermal Resistance 【Junction - Solder point 】 Rth(j-s) ℃/W 【 Thermal Characteristics 】 Electrostatic Discharge Threshold "HBM" 1,000 V -40 ～ +120 Note 1 Note 2 ESD testing method : EIAJ4701/300(304) Human Body Model(HBM) 1.5kΩ,100pF Note2 (Ta=25℃) Please refer to page 10, Soldering Conditions. SYMBOL Tj ITEM Junction Temperature IFRM 100 Topr Reverse Current IR 70 IF 30 mA ΔIFRM 2.86 mA/℃ 120 Repetitive Peak Forward Current "10ms,1/10duty" (Ta=25℃) Diffused Pale Yellow InGaN White 【 Product Overview 】 Resin Color( Emitting Area) Power Dissipation Pd IFRM Derate Linearly from "85℃" Die Material Emitting Color Note1 White Forward Current mA Tsld ΔIF 0.86 mA/℃ 【 Absolute Maximum Ratings 】 Resin Color (Lamp Housing) ITEM SYMBOL MAXIMUM RATINGS UNITS mW ESD Storage Temperature Tstg -40 ～ +100 260 ℃ mA Operating Temperature Soldering Temperature "Reflow Soldering" Rth(j-a)Measuring condition ・PCB：FR-4（t=1.6mm) ・Pattern Size：16mm2 Specifications Page 3 2017.9.22
Δθx 120 Note4 Δθy 470 IF = 20mA - - - UNITS 【 Electro and Optical Characteristics 】 2.9 0.272 - IF = 20mA VVF 3.8 (Ta=25℃) IF = 20mA 540 Note6,7- Forward Voltage MIN. TYP. MAX. 3.3 ITEM SYMBOL CONDITIONS IF = 20mA IF = 20mAIV ΦV Luminous Intensity Luminous Flux 1.59- x mcd lm 0.287 820 Note8 Viewing Angle at 50% Iv, Δθx ; Housing long side axis, Δθy ; Housing short side axis Note5 Note8 Half Intensity Angle IF = 20mA deg. 120 y Chromaticity coordinate Note4 Tolerance : ±0.1V Note5,6 Please refer to each sorting charts. Note7 Chromaticity coordinate：x,y coordinate according to CIE1931 【 Sorting Chart for Luminous Intensity 】 LEDs shall be sorted out into the following chart and each rank parts shall be packed separately when shipping. MIN. MAX.Rank Condition CY 680 820 IV (mcd) CX 560 680 Tolerance : ±10% 470 560 Ta=25℃、 IF=20mASpecifications Page 4 2017.9.22
【 S orting chart For Chromaticity coordinates 】 LE Ds shall be sorted out into the following chart and each rank parts shall be packed separately when shipping.Specifications Note: Chromaticity Coordinates Tolerance Each Rank ±0.01 Tolerance ：±0.01 Page 5 2017.9.22 0.18 0.22 0.26 0.30 0.34 0.38 0.42 x y 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 y (IF=20mA, Ta=25℃)
Tolerance ：±0.01 (IF=20mA, Ta=25℃) Specifications 【 Sorting chart For Chromaticity coordinates】 LEDs shall be sorted out into the following chart and each rank parts shall be packed separately when shipping. Page 6 2017.9.22 Right down y x yRank x y x y x Left down Left upper Right upper
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 380 430 480 530 580 630 680 730 780 Spatial Distribution Condition: Ta = 25℃, IF=20mA Relative Intensity: (%) Relative Intensity vs. Wavelength Condition: Ta = 25℃, IF =20mA Wavelength: (nm) Relative Intensity Technical Data 100 100 50 0 50 100 60 -60 -30 90 -90 x direction y direction x y Page 7 2017.9.22
-20 0 20 40 60 80 100 120 DC Duty 50% Duty 20% Duty 10% 100 2.4 2.9 3.4 3.9 85℃ 25℃ 60℃ －20℃ －40℃ 100℃ Technical Data Page 8 2017.9.22 Forward V oltage vs. Forward Current Condition : Ta = -40℃～100℃ Forward Voltage: VF (V) Forward Current: IF(mA) 0.5 1.5 2.5 0 10 20 30 CI Forward Current vs. Relative Intensity Condition : Ta = 25℃ Forward Current: IF (mA) Relative Intensity MAX Forward Current : IFMAX (mA) Ambient Temp. vs. Max. Forward Current Repetition Frequency : f ≧ 10Hz Ambient Temp. : Ta (℃) 0.5 1.5 -40 -20 0 20 40 60 80 100 Ambient Temp. vs. Relative Intensity Condition : IF= 20mA Ambient Temp. : Ta(℃) Relative Intensity
0.280 0.285 0.290 0.295 0.300 0.305 0.310 ｙ ｘ 60℃ 25℃ 0℃ 85℃ －20℃ －40℃ 100℃ 0.280 0.285 0.290 0.295 0.300 0.305 0.310 ｙ ｘ 2mA 10mA 5mA CI 20mA 30mA Technical Data Page 9 2017.9.22 2.4 2.9 3.4 3.9 -40 -20 0 20 40 60 80 100 IF=10mA IF=20mA IF= 5mA IF=30mA IF= 2mA Ambient Temp. vs. Forward V oltage Condition : IF = 2mA～20mA Ambient Temp. : Ta (℃) Forward Voltage: VF (V) Forward current vs. Chromaticity coordinates Condition: Ta = 25℃ Ambient Temp. vs. Chromaticity coordinates Condition : IF = 20mA 100 1 10 100 Forward Current : IFRM MAX. (mA) Duty Cycle vs. Max. Forward Current Condition: Ta = 25℃ Duty Ratio: (%)
- Heat stress during soldering will influence the reliability of LEDs, however that effect will vary on heating method. Also, if components of varying shape are soldered together, it is recommended to set the soldering pad temperature according to the component most vulnerable to heat (e.g., surface mount LED). 2. LED parts including the resin are not stable immediately after soldering ( when they are not at room temperature), any mechanical stress may cause damage to the product. Please avoid such stress after soldering, especially stacking of the boards which may cause the boards to warp and any other types of friction with hard materials. 3. Recommended temperature profile for the Reflow soldering is listed as the temperature of the resin surface. Temperature distribution varies on heating method, PCB material, other components in the assembly, and mounting density. Please do not repeat the heating process in Reflow process more than twice. Note 1 Recommended temperature profile for the reflow soldering is listed as the temperature of the resin surface. This should be the maximum temperature for soldering. Lowering the heating temperature and decreasing heating time is very effective in achieving higher reliability . Note 2 The reflow soldering process should be done up to twice(2 times Max). When second process is performed, interval between first and second process should be as short as possible to prevent absorption of moisture to resin of LED. The second soldering process should not be done until LEDs have returned to room temperature (by nature-cooling) after first soldering process. 【Soldering Precaution】 (acc.to EIAJ-4701/300) 【Recommended Reflow Soldering Condition】 40sec MAX. 150℃～180℃ +1.5～+5℃/s 260℃ MAX. -1.5～-5℃/s 90~120sec （Pre-heating） (Soldering） 230℃ MAX. Peak Temperature Page 10 2017.9.22
- If soldering manually, Stanley recommends using a soldering iron equipped with temperature control. During the actual soldering process, make sure that the soldering iron never touches the LED itself, and avoid the LED's electrode heating temperature reaching above the heating temperature of the solder pad. All repairs must be performed only once in the same spot, and please avoid reusing components. 5. In soldering process, immediately after iron tip is cleaned, please make sure that the soldering iron reaches the appropriate temperature before using. Also, please avoid applying any types of pressure to the soldered components before the solder has been cooled and hardened, as it may deteriorate solder performance and solder quality. 6. When using adhesive material for tentative fixatives, thermosetting resin or Ultraviolet radiation (UV) setting resin with heat shall be recommended. 《The curing condition, Temperature:150℃Max./Time:120sec.Max.》 7. Flow soldering (dip soldering) is not recommended for this product . 8. lsopropyl alcohol is recommended for cleaning. Some chemicals, including Freon substitute detergent could corrode the lens or the casing surface, which cause discoloration, cloud, crack and so on. Please review the reference chart below for cleaning. If water is used to clean (including the final cleaning process), please use pure water (not tap water), and completely dry the component before using. 【Recommended Manual Soldering Condition】 Temperature of Iron Tip 350℃MAX. Soldering Duration, Time 3sec.Max.,1 time Chemical Adaptability Isopropyl Alcohol ✓ Trichloroethylene × Chlorothene × Acetone × Thinner × Page 11 2017.9.22
This kind of LED lamp is highly sensitive to surge voltage generated by the On/Off status change and discharges of static electricity through frictions with synthetic materials, which may cause severe damage to the die or undermine its reliability. Damaged products may experience conditions such as extremely high reverse voltage, or a decrease of forward rise voltage, deteriorating its optical characteristic. Stanley products are designed to withstand up to 1,000V under the EIAJ ED -4701/300 Test ♯304 (HBM), and are packed with anti-static components. However, the following precautions and measures are vital in ensuring product quality during shipment. EIAJ ED-4701/300（304/HBM） Electrification model: C=100pF, R2=1.5KΩ ① Do not place electrified non-conductive materials near the LED product. Avoid LED products from coming into contact with metallic materials.( Should the metallic material be electrified , the sudden surge voltage will most likely damage the product .) ② Avoid a working process which may cause the LED product to rub against other materials . ③ Install ground wires for any equipment, where they can be installed, with measures to avoid static electricity surges. ④ Prepare a ESD protective area by placing a Conductive Mattress (1MΩ MAX.) and Ionizer to remove any static electricity. ⑤ Operators should wear a protective wrist-strap. ⑥ Operators should wear conductive work-clothes and shoes. ⑦ To handle the products directly, Stanley recommends the use of ceramic, and not metallic, tweezers. 2. Working Environment ① A dry environment is more likely to cause static electricity. Although a dry environment is ideal for storage state of LED products, Stanley recommends an environment with approximately 50% humidity after the soldering process. ② Recommended static electricity level in the working environment is less than 150V, which is the same value as Integrated Circuits (which are sensitive to static electricity). 【 For Electric Static Discharge ( ESD) 】 1. Electrification/Static Electricity protection Stanley recommends the following precautions in order to avoid product (die) damage from static electricity , when an operator and other materials electrified by friction coming in contact with the product. Page 12 2017.9.22
【 Other Precautions 】 1. Stanley LED Lamps have semiconductor characteristics and are designed to ensure high reliability. However, the performance may vary depending on usage conditions 2. Absolute Maximum Ratings are set to prevent LED lamps from failing due to excess stress( temperature, current, voltage, etc.). Usage conditions must not exceed the ratings for a moment, nor do reach one item of absolute maximum ratings simultaneously. 3. In order to ensure high reliability from LED Lamps, variable factors that arise in actual usage conditions should be taken into account for designing. ( Derating of TYP., MAX Forward Voltage, etc.) 4. Please insert Straight Protective Resistors into the circuit in order to stabilize LED operation and to prevent the device from igniting due to excess current. 5. Please avoid the stick of foreign material because molding resin in the products have adhesiveness. Also please don't touch lens portion. 6. Please check the actual performance in the assembly because the Specification Sheets are described for LED device only. 7. Please refrain from looking directly at the light source of LED at high output, as it may harm your vision. 8. The products are designed to operate without failure in recommended usage conditions. However, please take the necessary precautions to prevent fire, injury, and other damages should any malfunction or failure arise . 9. The products are manufactured to be used for ordinary electronic equipment. Please contact our sales staff beforehand when exceptional quality and reliability are required, and the failure or malfunction of the products might directly jeopardize life or health ( such as for airplanes, aerospace, transport equipment, medical applications, nuclear reactor control systems and so on). 10. When there is a process of supersonic wave welding etc. after mounting the product, there is a possibility of affecting on the reliability of junction part in package (junction part of die bonding and wire bonding). Please make sure there is no problem before using. 11. The formal specification sheets shall be valid only by exchange of documents signed by both parties. Handling Precaution Page 13 2017.9.22
- Picking up point with nozzle: Lamp housing of the product ( area) (Shown below) ＜Recommendation＞ The picking up point should be within lamp housing portion, because the silicone resin used for the lens is soft. (If the nozzle makes contact with the lens, the products might be destroyed) 【 Handling Precautions for Product Mounting 】 Please adjust the load, the pick up point, the nozzle diameter, etc. before mounting because the over load can cause the breakage of the lamp housing. a b 2. Recommended Nozzle shape ※Nozzle with chamfering is recommended Handling Precaution Load : less than 10N (to avoid product breaking) Page 14 2017.9.22
This product is baked (moisture removal) before packaging, and is shipped in moisture -proof packaging (as shown below) to minimize moisture absorption during transportation and storage. However, with regard to storing the products, Stanley recommends the use of dry-box under the following conditions is recommended. Moisture -proof bag as the packaging is made of anti-static material but packaging box is not. The package should not be opened until immediately prior to its use, and please keep the time frame between package opening and soldering which is 【maximum 672h】. If the device needs to be soldered twice, both soldering operations must be completed within168h. If any components should remain unused, please reseal the package and store them under the conditions described in the 【 Recommended Storage Condition 】 above. This product must be required to perform baking process (moisture removal) for at least 48h, not exceed for 72h, at 60+/-5 degrees Celsius if following conditions apply. 1.In the case of silica gel (blue) which indicates the moisture level within the package, changes or loses its blue color. 2. In the case of time passes for 168h after the package is opened once. Baking process should be performed after LED having been taken out of the package . Baking may be performed in the tape-reel form , however if it is performed with the reel stacked over one another, it may cause deformation of the reels and taping materials and later obstruct mounting. Please handle only once it has returned to room temperature. Provided that, baking process shall be 2 times MAX. 【Time elapsed after Package Opening】 In the case of the package unopened , 6 months under 【 Recommended Storage Condition 】. Please avoid rapid transition from low temp. condition to high temp. condition and storage in corroding and dusty environment. 【Recommended Storage Condition / Products Warranty Period 】 Temperature +5～30℃ Humidity Under 70% Packaging Specifications for at least 24h,not exceed for 72h Page 15 2017.9.22
Baking LED under recommended condition Product Mounting Unused-product remained Return to moisture-proof package and seal Finished Reopen the moisture-proof package Flow chart：Package Opening to Mounting Stored under recommended condition Moisture-proof package first time opening Allowable leaving time exceeded (*) Discoloration of silica gel 【Moisture-proof Packaging Specification】 Fastener for re-storage after opening bag Customer's opening position Product Label (Desiccant with indicator for moisture level is enclosed.) A SYM. PART NAME MATERIAL REMARKS ① Moisture-proof bag with Aluminum layer PET+Al+PE with ESD protection 【Flow Chart-package Opening to Mounting】 Heat Sealing position (after product being put in) Allowable leaving time means the maximum allowable leaving time after opening package, which depends on each LED type. The allowable leaving time should be calculated form the first opening of package to the time when soldering process is finished. When judging if the allowable leaving time has exceeded or not, please subtract the soldering time. The allowable leaving time after reopening should be calculated form the first opening of package, or from the time when baking process is finished. Packaging Specifications Page 16 2017.9.22
【 Packing box 】 (RoHS・ELV Compliant) The above measure is all the reference value. The box is selected out of the above table by shipping quantity. B Type A Material / box ： Cardboard C5BF Type B,C Material / box ： Cardboard K5AF Partition ： Cardboard K5BF Box Type Outline dimension L × W × H (mm) Capacity of the box Type A 280 × 265 × 45 3 reel Type B 310 × 235 × 265 15 reel Type C 440 × 310 × 265 30 reel Packaging Specifications Page 17 2017.9.22 NO. PART NAME MATERIAL REMARKS ② Packing Box Corrugated Cardboard without ESD protection
【 Label Specification】 ( acc.to JIS-X0503(Code-39) Product label A. Parts number B. Bar-code for parts number C. Parts code (In-house identification code for each parts number) D. Packed parts quantity E. Bar-Code for packed parts quantity F. Lot number & Rank (refer to Lot Number Notational System for details ) G. Bar-Code for Lot number & Rank Opto device label A. Customer Name B. Parts Type C. Parts Code D. Parts Number E. Packed Parts Quantity F. Carton Number G. Shipping Date H. Bar-Code for In-house identification Number <Remark> Bar-code font : acc.to Code-39(JIX0503) B A Packaging Specifications Page 18 2017.9.22
Taping and Reel Specifications (acc.to JIS-C0806-03） 【Appearance】 Note "-TR" means cathode side of LEDs should be placed on the sprocket-hole side. Items Specifications Remarks Leader area Cover-tape Cover-tape shall be longer than 300mm without carrier-tape The end of cover-tape shall be held with adhesive tape. Carrier-tape Empty pocket shall be more than 25 pieces. Please refer to the above figure for Taping & reel orientation . Trailer area Empty pocket shall be more than 40 pieces. The end of taping shall be inserted into a slit of the hub. Direction to take out Page 19 2017.9.22
Taping and Reel Specifications (acc.to JIS-C0806-03） 【 Qty. per Reel】 【 Mechanical strength】 【 Others】 2,000parts/reel Minimum Qty. per reel might be 500 parts when getting less than 2,000 parts. In such case, parts of 500-unit-qty. shall be packed in a reel and the qty. shall be identified on the label. Cover-tape adhesive strength shall be 0.1 ～1.0N ( An angle between carrier-tape and cover-tape shall be170 deg. ) Both tapes shall be so sealed that the contained parts will not come out from the tape when it is bent at a radius of 15mm. Qty./reel Max. qty. of empty pocket Remark 500 1 - 1,000 1 - 1,500 1 - 2,000 2 No continuance Reversed-orientation, Up-side down placing, side placing and out of spec. parts mixing shall not be held. Max. qty. of empty pocket per reel shall be defined as follows. Page 20 2017.9.22
【Taping Dimensions】 【Reel Dimensions】 Taping and Reel Specifications (acc.to JIS-C0806-03） Unit ：mm SYM. PART NAME REMARKS Carrier-tape with ESD protection Cover-tape with ESD protection with ESD protectionCarrier-reel Page 21 2017.9.22
Lot Number Notational System ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ① - 1digit ： Production Location (Mark identify alphabet) ② - 1digit ： Production Year (Last digit of Production Year 2009→9,2010→0,2011→1, ･･･) ③ - 2digit ： Production Month (Jan. to Sep. , should be 01,02,03,･････) ④ - 2digit ： Production Date ⑤ - 3digit ： Serial Number ⑥ - 2digit ： Tape and Reel following Number ⑦ - 2digit ： Luminous Intensity Rank. (If luminous intensity rank is 1 digit, "-" shall be dashed on the place for the second digit. If there is no identified intensity rank, "- -" is used to indicate.) ⑧ - 2digit ： Chromaticity Rank (If chromaticity rank is 1 digit, "-" shall be dashed on the place for the second digit. If there is no identified intensity rank, "- -" is used to indicate.) ⑨ - 1digit ： Option Rank (Stanley normally print "-" to indicate) Page 22 2017.9.22
Correspondence to RoHS・ELV instruction This product is in compliance with RoHS・ELV . Prohibition substance and it's criteria value of RoHS・ELV are as follows. ・RoHS instruction …… Refer to following (1)～(6). ・ELV instruction ………. Refer to following (1)～(4). Substance Group Name Criteria Value (1) Lead and its compounds 1,000ppm Max (2) Cadmium and its compounds 100ppm Max (3) Mercury and its compounds 1,000ppm Max (4) Hexavalent chromium 1,000ppm Max (5) PBB 1,000ppm Max (6) PBDE 1,000ppm Max Page 23 2017.9.22
Reliability Testing Result 1. Reliability Testing Result 2. Failure Criteria ※Reference Test Test Item Test Conditions Duration Failure Room Temperature Operating Life EIAJ ED-4701 /100(101) Ta=25℃ IF=30mA 1,000h 0 / 20 High Temperature Operating Life EIAJ ED-4701 /100(101) Ta=85℃ IF=30mA 1,000h 0 / 20 Low Temperature Operating Life EIAJ ED-4701 /100(101) Ta=-40℃ IF=30mA 1,000h 0 / 20 Wet High Temperature Operating Life EIAJ ED-4701 /100(102) Ta=60℃ Rh=90% IF=30mA 1,000h 0 / 20 High Temperature Storage Life EIAJ ED-4701 /200(201) Ta=120℃ 1,000h 0 / 20 Low Temperature Storage Life EIAJ ED-4701 Wet High Temperature Storage Life EIAJ ED-4701 /100(101) Ta=60℃ Rh=90% 1,000h 0 / 20 Thermal Shock EIAJ ED-4701 /100(105) Ta=-40℃ ～120℃ (each 15min) 1,000 cycles 0 / 20 Thermal Shock Operating EIAJ ED-4701 /100(105) Ta=-40℃(OFF) ～85℃(IF=30mA ON) (each 15min) 1000 cycles 0 / 20 Cycled Temperature Humidity Operating Life EIAJ ED-4701 /200(203) Ta=-30℃(2h) ～ 80℃ 95% (2h) 8h/cycle IF=30mA 5min on-off cycles 0 / 20 Resistance to Reflow Soldering EIAJ ED-4701 /300(301) Moisture Soak ： 30℃ 70% 4weeks(672h) Preheating ： 150～180℃ 90-120s. Soldering ： 260℃ peak 2times 0 / 20 Electrostatic Discharge(ESD) ※ EIAJ ED-4701 /300(304) C=100pF R2=1.5kΩ ±2,000V once each polarity 0 / 10 Vibration, Variable Frequency EIAJ ED-4701 /400(403) 98.1m/s2(10G) 100～2,000Hz 20min(sweep) XYZ(direction) 2h each direction 0 / 10 Forward Voltage IF=20mA Failure Criteria Luminous Intensity IV VF External appearance SymbolItem Testing Max. Value ≧ Standard Max. Value × 1.2IF=20mA Testing Min. Value ＜ Standard Min. Value × 0.5 Conditions -- Notable Discoloration, Deformation and Cracking Page 24 2017.9.22
Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com/en Page 25 2017.9.22