VF4 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • 40A continuous contact rating @ 85°C.
  • 1 Form A and 1 Form C arrangements.
  • Plug-in or PC board terminals.
  • Optional mounting bracket.
  • Various enclosure options. Conditions All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH, 29.5 ± 1 .0" Hg.) unless otherwise noted. Coil Data Voltage: 6, 12 and 24VDC. Resistance: See Coil Data table. Nom. Power: (@ 23°C coil temp. and rated coil voltage.): 1 .6W, unsuppressed. 1 .81W, with 680 ohm resistor. Thermal Resistance: 50°C per actual coil watt in still air with no contact load current. Operate Data Must Operate and Must Release Voltage: See Coil Data table. Initial Operate Time: 7 milliseconds, typical, with rated coil voltage applied. Initial Release Time: 2 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage.) Notes (1) See Figure 1 . (2) Inrush current for lamp load. (3) Allowable overdrive is rated at ambient temperature for 23°C or 85°C as stated with no load current flowing through the relay contacts and minimum coil resistance. Also see Figure 2 for maximum ambient temperature versus applied coil voltage. (4) See Figure 2. (5) Current and times are compatible with circuit protection by a typical automotive circuit breaker. Relay will make, carry and break the specified current. Initial Dielectric Strength Between Contacts and Coil: 500V rms. Environmental Data T emperature Range: Storage:-40°C to +155°C. Operating: -40°C to +125°C (4). Shock: 20g, 11 milliseconds, half sine wave pulse. Vibration: (For NC contacts, NO contacts are significantly higher.) 10-40 Hz., 1 .27mm double amplitude. 40-70 Hz., 5 g's constant. 70-100 Hz., 0.5mm double amplitude. 100-500 Hz., 10 g's constant. Max. Switching Power: 50-500 watts DC (voltage dependent) (1). Min. Recommended Current: 1 amp @ 12VDC. Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts @ 40 amp contact load. 250 millivolts, maximum, for normally closed contacts @ 30 amp contact load. Expected Life: 10 million operations, mechanical; 100,000 operations at 40 amps, 14VDC, resistive load on normally open contact. Coil Data Abnormal Operation Overload Current: Consult factory. 24V Jump Start: 24VDC for 5 minutes conducting rated contact current @ 23°C. Drop T est:Capable of meeting specifications after a 3.28 foot (1 .0 meter) drop onto concrete. Flammability: UL94V-0 external; UL94-HB or better, internal parts (meets FMVSS 302). Load Form A Form C (NO) NO NC Max. Continuous Current 60A 60A 40A Max. Make Current(2) 120A 120A 45A Max. Break Current(1) 60A 60A 40A Coil Rated Coil Coil Coil Must-Operate Must-Release Allowable (3) Designator Voltage Resistance Inductance Voltage Voltage Overdrive (VDC) ±10% (Ohms) (H) (Ref.) (VDC) (VDC) (VDC) @ 23°C @ 85°C Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application.

reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Catalog 1308242 Issued 3-03 Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Safe breaking, arc extinguished (normally open contact) for resistive loads. Assumptions: 1 . Thermal resistance = 50°C per watt 2. Still air 3. Nominal coil resistance 4. Maximum mean coil temperature = 180°C 5. Coil temperature rise due to load = 2°C @ 8 amps = 5°C @ 16 amps = 11°C @ 24 amps = 20°C @ 32 amps = 32°C @ 40 amps 6. Thermal resistance and power dissipation based on coil resistance at 180°C 7 . Curves are based on 1 .6 watts at 23°C 8. When full lifetime is at high ambient and high load current, subtract 25°C from maximum allowable ambient temperature. 100 90 95 100 105 110 115 120 125 130 135 140 145 150 Applied Coil Voltage (% of Rated Nominal) Maximum Allowable Ambient Temperature ( °C) 110 120 130

0 Amp Contact Load

8 Amp Contact Load

16 Amp Contact Load

24 Amp Contact Load

32 Amp Contact Load

40 Amp Contact Load

0.5 1 2 3 4 5 71 0 3 0 20 Switching Current (Amps) Switching Voltage (VDC) 100W 200W 500W Figure 1 – Limiting Curve for Power Load Figure 2 – Ambient T emperature vs. Coil Voltage for Continuous Duty

Ordering Information

Part Number Arrangement Material Enclosure T erminals VF4-11 * 11 1 Form A AgNi0.15 Dust cover Quick connect VF4-11 * 13 1 Form A AgNi0.15 Dust cover Printed circuit VF4-15 * 11 1 Form C AgNi0.15 Dust cover Quick connect VF4-15 * 13 1 Form C AgNi0.15 Dust cover Printed circuit VF4-25 * 11 1 Form C AgNi0.15 Shrouded dust cover Quick connect VF435 * 11 1 Form C AgNi0.15 Weatherproof cover Quick connect VF4-41 * 11 1 Form A AgNi0.15 Dust cover with bracket Quick connect VF4-45 * 11 1 Form C AgNi0.15 Dust cover with bracket Quick connect VF4-45 * 21 1 Form C AgSnO Dust cover with bracket Quick connect VF4-51 * 11 1 Form A AgNi0.15 Shrouded dust cover with bracket Quick connect VF4-55 * 11 1 Form C AgNi0.15 Shrouded dust cover with bracket Quick connect VF4-61 * 11 1 Form A AgNi0.15 Weatherproof cover with bracket Quick connect VF4-65 * 11 1 Form C AgNi0.15 Weatherproof cover with bracket Quick connect VF4-81 * 11 1 Form A AgNi0.15 Dust cover with molded bracket Quick connect VF4-85 * 11 1 Form C AgNi0.15 Dust cover with molded bracket Quick connect *Standard Coil Voltages: D = 6VDC (Consult factory for availability). Optional Coil Suppression F = 12VDC Add suffix -S07 for 180 ohm resistor in parallel with 6VDC coil. H = 24VDC (Consult factory for availability). Add suffix -S01 for 680 ohm resistor in parallel with 12VDC coil. Add suffix -S08 for 2,700 ohm resistor in parallel with 24VDC coil. Epoxy Sealed Construction Add suffix -C01 for epoxy sealed unit. Add suffix -C05 for epoxy sealed unit with resistor. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. VF4-15F11 VF4-15F13 VF4-45F11 VF4-15H11 VF4-15H13 VF4-65F11-S01

reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Catalog 1308242 Issued 3-03 Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 1019

1 Form A 1 Form C

.236 ± .015 (6.0 ± 0.4) .622 ± .024 (15.8 ± 0.61) 1.10 MAX. (28.0) .453 MAX. (11.5) .250 (6.3) .866 ± .020 (22.0 ± 0.5) ø.213 ± .004 (5.4 ± 0.1) .032 ±.001 (0.81 ± 0.03) 1.004 MAX. (25.5) 1.10 MAX. (28.0) .170 ± .008 (4.32 ± 0.2) .079 ± .008 (2.0 ± 0.2) ø .209 (5.3) 1.10 MAX. (28.0).59 (15.0) .236 (6.0) .638 (16.2) 1.004 MAX. (25.5) .453 MAX. (11.5) .250 (6.3) .197 (5.0) 1.10 MAX. (28.0) .250 (6.3) .661 (16.8) .122 (3.1) .315 (8.0) .331 (8.4).705 (17.9) 87A .732 (18.6) .355 (9.0) .886 (22.5) 1.516 MAX. (38.0) .252 (6.4) .453 MAX. (11.5) .167 (4.25) .250 TYP. (6.3) .984 MAX. (25.0) .482 (12.25) .16 MAX. (4.1) 1.26 MAX. (32.0) .157 (4.0) .285 (7.25) 1.26 MAX. (32.0) .705 (17.9) .315 (8.0) .661 (16.8) .177 (4.5) .331 (8.4) 87A Single Pin .098 (2.50) .126 (3.2) TIN PLATED Clinchable Power .098 (2.50) TERMINALS #30, 87, & 87a .331 (8.4) .102 (2.6) .055 (1.4) .315 (8.0) .331 (8.4).705 (17.9) .661 (16.8) .331 (8.4) .102 (2.6) .055 (1.4) .315 (8.0) .331 (8.4).803 (20.4) .661 (16.8) .197 (5.0).055 (1.4) .098 (2.5) .071 (1.8) VF4-XXX13 VF4-XXX12 Outline Dimensions Dust Cover With Quick Connect T erminals VF4-1_ _ (Without Bracket) & VF4-4_ _ (With Bracket) Plastic Bracket Cover With Quick Connect T erminals VF4-8_ _ _ _ Shrouded Dust Cover With Quick Connect T erminals VF4-2_ _ (Without Bracket) & VF4-5_ _(With Bracket) Weatherproof Cover With Quick Connect T erminals VF4-3_ _ (Without Bracket) & VF4-6_ _(With Bracket) Suggested PC Board Layouts (Bottom Views) Wiring Diagrams (Bottom Views) .728 ± .010 (18.5 ± 0.25) .453 MAX. (11.5) .26 (6.6) .354 (9.0) .245 (6.3) 1.42 MAX. (36.1) 87 86 85 87a .653 ± .066 (16.6 ± 0.15) 1.77 ± .019 (45.0 ± 0.5) .775 ± .006 (19.7 ± 0.15) .295 ±.018 (7.5 ± 0.45) .276 REF. (7.0) .453 ± .006 (11.50 ±0.15) .165 ± .006 (4.20 ± 0.15) .331 (8.4) .472 ± .015 (12.0 ± 0.38) .66 (16.8) .705 (17.9) .354 (8.0) 1.42 MAX. (36.1) Printed Circuit Board T erminals

reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Catalog 1308242 Issued 3-03 Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Connector For Use With VF4-3_ _ _ _ or VF4-6_ _ _ _ Relays With Weatherproof Cover Connectors to mate with the weatherproof cover relays are available from Delphi Packard (1-800-PACKARD). (Typical Delphi Packard part number: 12065685). Connectors For Use With Quick Connect T erminal VF4-1_ _ _ _ , VF4-4_ _ _ _ And VF4-8_ _ _ _ Relays Connectors Connector/T erminal Usage Chart - Our authorized distributors are more likely to stock boldface items. Required Crimp T erminals (Order Separately) Connector T erminal P/N Alternate P/N Wire AWG Qty. Required Form A Form C VCF4-1000 None None N/A 0 0 VCF4-1001 26A1349A AMP 60249-1 12-16 4526A1349B AMP 42281-1 14-18 VCF4-1002 26A1348A Packard 12015864 18-20 VCF4-1003 26A1348B Packard 12015865 14-16 4 5 26A1348C Packard 12084588 10-12 PC Board Socket VCF4-1000 .945 (24.0) 1.043 (26.5) .111 (2.8) .040 (1.0) .274 (7.0)

2 LOCATING

.571 (14.5) .805 (20.4) .295 (7.5) .256 (6.5) .083 (2.1) .092 (2.3)

5 HOLES

.143 (3.6) .315 (8.0).331 (8.4).705 (17.9) .083 (2.1) .512 (13.0) .665 (16.9) Wiring Harness Style Connector (order terminals separately) VCF4-1001 .945 (24.0) 1.043 (26.5) .905 (23.0) .090 (2.3) Wiring Harness Style, Bracket Mount Socket (order terminals separately) (Mount individually or can be interlocked) VCF4-1002 .48 (12.2) 1.00 (25.4) 1.57 (39.9) 24A111 terminal retainer supplied with connector .218 (5.5) .36 (9.1) 1.20 (30.5) 1.31 (33.3) 1.42 (36.1) .331 (8.4).661 (16.8) .331 (8.4) .315 (8.0) .705 (17.9) 1.11 (28.1) 1.09 (27.6) Connector For Use With VF4-2_ _ _ _ or VF4-5_ _ _ _ Relays With Shrouded Dust Cover (order terminals separately) VCF4-1003