V844ME01-LF_10 ZCOMM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B PHASE NOISE (1 Hz BW, typical) OFFSET (Hz) £(f) (dBc/Hz) Performance Specifications Typ Units Min Max 103 -88 -25 Oscillation Frequency Range Phase Noise @ 10 kHz offset (1 Hz BW) Harmonic Suppression (2nd) Tuning Voltage Tuning Sensitivity (avg.) Power Output Load Impedance Input Capacitance Pushing Pulling ( dB Return Loss, Any Phase) Operating Temperature Range MHz dBc/Hz dBc Vdc MHz/V dBm pF MHz/V MHz 3200 3400 0.5 4.5 Package Style 85-40 Power Supply Requirements Typ Units Min Max Vdc mA Supply Voltage (Vcc, nom.) Supply Current (Icc) 21 Direct Broadcast Satellite Up/Down Conversion Microwave Links
Applications
Voltage-Controlled Oscillator Surface Mount Module V844ME01-LF A1Rev Additional Notes Application Notes
- AN-101: Mounting and Grounding
- AN-102: Output Loading
- AN-107: Manual Soldering
14118 Stowe Drive, Suite B | Poway, CA 92064
TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: applications@zcomm.com MINI-14H
Tuning Curve, typ. 3000 3040 3080 3120 3160 3200 3240 3280 3320 3360 3400 3440 3480 3520 TUNING VOLTAGE (Vdc) FREQUENCY (MHz) Power Curve, typ. Footprint Voltage-Controlled Oscillator Surface Mount Module V844ME01-LF A1Rev POWER OUTPUT (dBm) 0.030 MIN. CUTBACK FROM LIVE PADS RECOMMEN DED FOOT PRI NT SEVERAL HOLES OF 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. O °C°C °C LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B -40 -4085 25 3053 3104 3150 3196 3244 3296 3348 3401 3455 3504 FREQUENCY (MHz) Physical Dimensions P1 Vt P2 RF OUT P3 Vcc PIN CONFIGURATION REST GROUND PACKAGE H MINI-14H 0.220
0.160 MI NI -14H-LOW
0.130 MINI-14H-L
W/O# D/C NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010