V7PC-07A BEL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS BP01V7PC-07A 12V Input / 1.5 – 3.3V Output / 7A

  • Nonisolated
  • Industry standard pinout
  • Fixed frequency
  • High efficiency means less power dissipation
  • Optimized for cost
  • Remote on/off
  • Undervoltage lockout
  • Over current and short circuit protection

Description

The Bel V7PC-07A series modules are non-isolated, step down DC/DC power converters that operate from a nominal 12V source. These converters are available in a range of output voltages from 1.5V to 3.3V. They are packaged in an industry standard single-in-line footprint and provide a maximum 7A output. Standard features include remote on/off, over current protection and output voltage adjust. Remote sense is an optional feature. These products may be used almost anywhere low-voltage silicon is employed and a 12V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment.

Applications

  • Telecommunications
  • Networking
  • Computers and peripherals Options Part Number Selection
  • Remote sense tuptuO egatloV tupnI egatloV tuptuO.xaM tnerruC tuptuO.xaM rewoP lacipyT ycneiciffE rebmuNtraP rebmuNtraP noitpOesneSetomeR V3.3V 21A 7W 32% 880 33A70-CP7VS 33A70-CP7V V5.2V 21A 7W 5.71% 680 52A70-CP7VS 52A70-CP7V V5.1V 21A 7W 5.01% 080 51A70-CP7VS 51A70-CP7V

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS BP01V7PC-07A 12V Input / 1.5 – 3.3V Output / 7A page 2 Input Specifications Absolute Maximum Ratings Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device. Note: Input capacitance 470µF/16V, ESR = 0.03 Ω max at 100kHz @ 25° C. 1. With simulated source impedance of 500nH, 5Hz to 20MHz. retemaraP lobmyS niM lacipyT xaM tinU egatloVtupnIsuounitnoCn iV3 .0- 51V egatloVlanimreTelbanEtuptuOn etuoV3 .0- 51V erutarepmeTtneibmAb maT0 07C ° erutarepmeTegarotSr otsT0 4- 001C ° retemaraP lobmyS niM lacipyT xaM stinU egatloVtupnIgnitarepOn iV8 .01 2.31V tnerruCtupnIn iI 3A tnerruCtupnIdaoLoN 05A m tnerruCtupnIffOetomeR 30 1A m tnerruCelppiRdetcelfeRtupnI 1 910 4A m smr )P-P(tnerruCelppiRdetcelfeRtupnI 1 051k pAm I2 tneisnarTtnerruChsurnIt 40.08 0.0A 2s dlohserhTegatloVnOnruT 7.9 V dlohserhTegatloVffOnruT8 8 .80 1V

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS BP01V7PC-07A 12V Input / 1.5 – 3.3V Output / 7A page 3 Output Specifications Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 1. Vin = 12V, Iout = full load, Ta = 25° C. 2. 0 - 20MHz BW, 0.1µF ceramic cap on output. retemaraP eludoM lobmyS niM lacipyT xaM stinU tnioPteSegatloVtuptuO 1 V3.3 V5.2 V5.1 tuoV 742.3 064.2 674.1 3.3 5.2 5.1 353.3 045.2 425.1 V noitalugeRdaoL V3.3 V5.2 V5.1 Vm noitalugeReniLl lA 30 1V m erutarepmeTrevOnoitalugeR C°07-°0V 3.3 V5.2 V5.1 Vm noitalugeRegatloVtuptuOlatoT V3.3 V5.2 V5.1 Vm esioNdnaelppiRtuptuO 2 llA 050 01p -pVm esioNdnaelppiRtuptuO 2 llA 515 2s mrVm egnaRtnerruCtuptuOl lAt uoI0 7A timiLtnerruCCDtuptuOl lAm iltuoI4 .8 4.51A egruStiucriCtrohS V3.3 V5.2 V5.1 egrustuoI 4.0 9.0 6.1 0.1 0.2 5.2 A2s emiTnonruT V3.3 V5.2 V5.1 noT 001 021 sm nOnruTtatoohsrevOl lA 03 % ecnaticapaCtuptuOl lAt uoC0 74 0082F µ

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS BP01V7PC-07A 12V Input / 1.5 – 3.3V Output / 7A Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 3. di/dt = 0.5A/uS, Vin = 12VDC, Ta = 25° C, and with a 470µF aluminum cap on output. Output Specifications retemaraP eludoM lobmyS niM lacipyT xaM stinU esnopseRtneisnarT 3 Δ daoLxaMfo%001ot%05V V3.3 055 61V m emiTgniltteSs T 030 01s µ Δ daoLxaMfo%05ot%001V 055 61V m emiTgniltteSs T 030 01s µ esnopseRtneisnarT 3 Δ daoLxaMfo%001ot%05V V5.2 050 31V m emiTgniltteSs T 030 01s µ Δ daoLxaMfo%05ot%001V 050 31V m emiTgniltteSs T 030 01s µ esnopseRtneisnarT 3 Δ daoLxaMfo%001ot%05V V5.1 050 31V m emiTgniltteSs T 030 01s µ Δ daoLxaMfo%05ot%001V 050 31V m emiTgniltteSs T 030 01s µ page 4

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS BP01V7PC-07A 12V Input / 1.5 – 3.3V Output / 7A page 5 General Specifications Control Specifications retemaraP eludoM lobmyS niM lacipyT xaM stinU ycneiciffE 1 V3.3 V5.2 V5.1 η ycneuqerFgnihctiwS V3.3 V5.2 V5.1 wsF 552 012 012 003 052 052 543 092 092 zHk egnaRmirTegatloVtuptuO V3.3 V5.2 V5.1 011 011 011 noitasnepmoCesneSetomeRl lA 5.0V thgieWl lA 5.8 g retemaraP eludoM lobmyS niM lacipyT xaM stinU ffO/nOetomeRl lAn etuoV V )ffOtinU(woLlangiSl lA3 .0- 3.0V )nOtinU(hgiHlangiSl lA8 .2 2.31V 1. Vin=12V, full load and Ta=25° C.

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS BP01V7PC-07A 12V Input / 1.5 – 3.3V Output / 7A page 6 Efficiency Data Module 3.3V 72.0% 76.0% 80.0% 84.0% 88.0% 92.0% 1234567 OUTPUT CURRENT EFFICIENCY 10.8V 12.0V 13.2V Module 2.5V 72.0% 76.0% 80.0% 84.0% 88.0% 92.0% 1234567 OUTPUT CURRENT EFFICIENC Y 10.8V 12.0V 13.2V Module 1.5V 60.0% 64.0% 68.0% 72.0% 76.0% 80.0% 84.0% 88.0% 1234567 OUTPUT CURRENT EFFICIENC Y 10.8V 12.0V 13.2V

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS BP01V7PC-07A 12V Input / 1.5 – 3.3V Output / 7A page 7 Ripple and Noise Ripple and noise at full load and 12Vdc input and Ta=25° C 50% to 100% load transients at 12V input and Ta=25° C 100% to 50% load transients at 12V input and Ta=25° C Transient Response Transient response: di/dt = 0.5A/µS, external load capacitance Co = 470µF (electrolytic)

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS BP01V7PC-07A 12V Input / 1.5 – 3.3V Output / 7A Thermal Considerations page 8 Derating Curve 300LFM N atural C onvection O utput Current (A) O utput Current vs. Local Amb ient Tem perature and Air Velocity Amb ient Tem perature, Ta (˚C )

Bel Fuse Inc.

206 Van Vorst Street

Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS BP01V7PC-07A 12V Input / 1.5 – 3.3V Output / 7A page 9 Mechanical 0.20 [5.08] 0.28 [7.11] 2.50 [63.50] 0.10 [2.54] 1.90 [48.26] 0.13 [3.30] 0.55 [13.97] 0.025 [0.64] 0.183 [4.65] 0.425 [10.79] max 0.063 [1.60] Dim ensions are in inches [m illim eters]. Standard dim ension tolerance is ±0.005 [0.13] unless otherwise noted. niP noitcnuF 1o V+ 2o V+ *3n iPoN 4o V+ 5d nuorG 6d nuorG 7n iV+ 8n iV+ 9n iPoN 01m irT 11f fO/nOetomeR *Pin 3 used for remote sense option. 1 2 3 4 5 6 7 8 9 10 11