V60DM60C VISHAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
www.vishay.com Vishay General Semiconductor Revision: 18-Mar-2019 1 Document Number: 87583 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Dual Low-Voltage TMBS® (Trench MOS Barrier Schottky) Rectifier Ultra Low VF = 0.34 V at IF = 5.0 A DESIGN SUPPORT TOOLS AVAILABLE
FEATURES
- Trench MOS Schottky technology
- Very low profile - typical height of 1.7 mm
- Ideal for automated placement
- Low forward voltage drop, low power losses
- High efficiency operation
- Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C
- AEC-Q101 qualified available: - Automotive ordering code: base P/NHM3
- Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in high frequency DC/DC converters, switching power supplies, freewheeling diodes, OR-ing diode, and reverse battery protection in commercial, industrial, and automotive application. MECHANICAL DATA Case: SMPD (TO-263AC) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 and HM3 suffix meet JESD 201 class 2 whisker test Polarity: as marked Notes (1) Mounted on infinite heatsink (2) The heat generated must be less than the thermal conductivity from junction-to-ambient: dPD/dTJ < 1/RJA PRIMARY CHARACTERISTICS IF(AV) 2 x 30 A VRRM 60 V IFSM 320 A VF at IF = 30 A (TA = 125 °C) 0.61 V TJ max. 175 °C Package SMPD (TO-263AC) Circuit configuration Common cathode Top View Bottom View Anode 1 Anode 2 K Cathode eSMP® Series SMPD (TO-263AC) K 33DD3 D 3D Models Available MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL V60DM60C UNIT Device marking code V60DM60C Maximum repetitive peak reverse voltage V RRM 60 V Maximum average forward rectified current (fig. 1) per device IF(AV) (1) A per diode 30 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 320 A Operating junction temperature range T J (2) -40 to +175 Storage temperature range T STG -55 to +175
www.vishay.com Vishay General Semiconductor Revision: 18-Mar-2019 2 Document Number: 87583 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 5 ms Notes (1) Mounted on infinite heatsink (2) The heat generated must be less than the thermal conductivity from junction-to-ambient: dPD/dTJ < 1/RJA - junction-to-ambient (3) Free air, without heatsink Note (1) AEC-Q101 qualified ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL TYP. MAX. UNIT Instantaneous forward voltage per diode I F = 5 A TA = 25 °C VF (1) 0.46 - V IF = 15 A 0.55 - IF = 30 A 0.65 0.71 IF = 5 A TA = 125 °C 0.34 - IF = 15 A 0.47 - IF = 30 A 0.61 0.67 Reverse current at rated VR per diode V R = 60 V TA = 25 °C IR (2) -2 . 1 mATA = 125 °C 12 35 Typical junction capacitance 4.0 V, 1 MHz C J 3400 - pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL V60DM60C UNIT Typical thermal resistance per device R ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE V60DM60C-M3/I 0.55 I 2000/reel 13" di ameter plastic tape and reel V60DM60CHM3/I (1) 0.55 I 2000/reel 13" diameter plastic tape and reel
www.vishay.com Vishay General Semiconductor Revision: 18-Mar-2019 3 Document Number: 87583 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Average Power Loss Characteristics Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Reverse Leakage Characteristics Fig. 5 - Typical Junction Capacitance Fig. 6 - Typical Transient Thermal Impedance 0 25 50 75 100 125 150 175 Average Forward Rectified Current (A) Case Temperature (°C) RthJC = 0.8 °C/W RthJA = 50 °C/W 0 5 10 15 20 25 30 35 Average Power Loss (W) Average Forward Current (A) D = 0.1 D = 0.2 D = 0.3 D = 0.5 D = 1.0 D = 0.8 D = tp/T T tp 0.01 0.1 100 0 0.2 0.4 0.6 0.8 Instantaneous Forward Current (A) Instantaneous Forward Voltage (V) TJ = 25 °C TJ = 100 °C TJ = 125 °C TJ = -40 °C TJ = 150 °C TJ = 175 °C Instantaneous Reverse Current (mA) 0.00001 0.0001 0.001 0.01 0.1 100 1000 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) TJ = 150 °CTJ = 100 °C TJ = 25 °C TJ = -40 °C TJ = 125 °C TJ = 175 °C 100 1000 10 000 0.1 1 10 100 Junction Capacitance (pF) Reverse Voltage (V) TJ = 25 °C f = 1.0 MHz V sig = 50 mVp-p 0.1 100 0.01 0.1 1 10 100 Transient Thermal Impedance (°C/W) t - Pulse Duration (s) Junction-to-ambient
www.vishay.com Vishay General Semiconductor Revision: 18-Mar-2019 4 Document Number: 87583 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 7 - Thermal Resistance Junction-to-Ambient vs. Copper Pad Areas PACKAGE OUTLINE DIMENSIONS in inches (millimeters) 123456789 Thermal Resistance (°C/W) Copper Pad Areas (cm2) Epoxy printed circuit board FR4 copper thickness = 70 μm S (cm2) (8.99) 0.059 (1.50) REF. (8.59) 0.354 0.338 (8.60) (8.20) 0.339 0.323 (10.20) (9.80) 0.402 0.386 (12.93) (12.33) 0.509 0.485 (1.60) (1.20) 0.063 0.047 (1.21) (0.81) 0.048 0.032 (0.52) (0.27) 0.020 0.011 (1.80) (1.60) 0.071 0.063 (1.74) (1.34) 0.069 0.053 (0.52) (0.27) 0.020 0.011 (1.23) (0.72) 0.052 0.028 (7.00) (6.60) 0.276 0.260 Mounting Pad Layout 0.420 (10.66) MIN. (15.33) (13.33) 0.604 0.525 0.080 (2.03) MIN. 0.120 (3.05) REF. (2.67) (2.41) 0.105 0.095 SMPD (TO-263AC) NOM.0.194 (4.93) NOM.0.200 (5.08) 0 to 0.01 (0 to 0.254) REF.0.330 (8.38)
www.vishay.com Vishay Revision: 01-Jan-2021 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gr anted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED