V600-A22

V680 OMRON | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 59

Technical content

CSM_V680 Series_DS_E_1_17 RFID System V680 Series RFID Systems with ISO/IEC 18000-3 (15693) Compliance

High-speed communications and highly reliable communications provided with an electromagnetic induction system and unique technology.
Antennas and RF Tags with excellent environmental resistance.
Wide line-up of ultra-compact, long-life RF Tags, with capacities from 1 to 8 kbytes.
Visualizes the communications status for simple analysis of the operating environment.
Complies with FCC Rules and R&TTE Directive. System Configuration Connect V680 Antennas and Amplifier Units to a V680-series Controller, and read or write data from or to RF Tags. * For information on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on page 3. Host Device Amplifier Unit Antenna Amplifier-integrated Controller Interface Cable Extension Cable ID Controller RF Tag V680S-D8KF67 V680S-D8KF67M V680S-D8KF68 V680S-D8KF68M 1-kbyte RF Tags 8-kbyte RF Tags V680-D1KP52MT V680-D1KP54T V680-D1KP66T-SPV680-D1KP53M V680-D1KP58HTN V680-D1KP66T V680-D1KP66MT V680-D1KP52M-BT01 V680-D1KP52M-BT11 V680-D2KF52M 2-kbyte RF Tags V680S-D2KF67 V680S-D2KF67M V680-D2KF52M-BT01 V680-D2KF52M-BT11 V680S-D2KF68 V680S-D2KF68M Standard Programmable Controller The V680-H01-V2 can be used only with 1-channel Controllers or ID Sensor Units. An Amplifier is not required. It is built in. Cable length (0.5/5/10) m Max. extended length: 62.5 m Max. extended length: 30.5 m I/O Connection DeviceNet PROFIBUS ID Flag Sensor Personal computer CS/CJ-series PLC ID Sensor Units (1 or 2 channels) CJ1W-V680C11/C12 CS1W-V680-C11/C12 Standard 2-channel Controller V680-CA5D02-V2 Standard 1-channel Controller V680-CA5D01-V2 V680-HS51 Cable length 2 m V680-A60 Cable length (2/5/10) m V680-HAM91/-HAM81 (NPN output/PNP output) DeviceNet ID Slave V680-HAM42-DRT PROFIBUS ID Slave V680-HAM42-PRT V680-HS52 Cable length (2/12.5) m V680-HS63 Cable length (2/12.5) m V680-HS65 Cable length (2/12.5) m Cable length (2/3/5/10/20/30) m V700-A40-W Cable length (2/5/10/20/30) m V680-H01-V2 Cable length 0.5 m The maximum extendable cable length is 30 m. (not including the Amplifier) Two Extension Cables cannot be connected to each other. The maximum extendable cable length is 40 m. (Not including the Amplifier.) Do not connect more than two Extension Cables to each other. For 1-Kbyte RF Tags V680-HA63A For 2- or 8-Kbyte RF Tags V680-HA63B OMRON Programmable Controller CJ/CS/NJ Series

Note: Certificated as type approval of radio in 51 countries including Japan, European countries and the USA . However, some models cannot be used. Contact your OMRON sales representative for details on whether application is supported in other countries. The latest information on the status of certification for radio wave regulations in various countries can be confirmed on the OMRON website. * For information on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on page 3. Host DeviceHandheld Reader Writer Standard Programmable Controller SYSMAC Series Personal computer Handheld Terminal (Recommended: Zebra Technologies Handheld Terminal) Handheld Reader Writer for Zebra Technologies Handheld Terminal V680-CH1D-PSI Standard Serial Handheld Reader Writer V680-CH1D USB Handheld Reader Writer V680-CHUD AC Adapter (order separately) V600-A22 RF Tag V680S-D8KF67 V680S-D8KF67M V680S-D8KF68 V680S-D8KF68M 1-kbyte RF Tags 8-kbyte RF Tags V680-D1KP52MT V680-D1KP54T V680-D1KP66T-SPV680-D1KP53M V680-D1KP58HTN V680-D1KP66T V680-D1KP66MT V680-D1KP52M-BT01 V680-D1KP52M-BT11 V680-D2KF52M 2-kbyte RF Tags V680S-D2KF67 V680S-D2KF67M V680-D2KF52M-BT01 V680-D2KF52M-BT11 V680S-D2KF68 V680S-D2KF68M

Combinations of Amplifier Units, Antennas, and RF Tags 1-kbyte RF Tags 2-kbyte RF Tags 8-kbyte RF Tags Note: For details, refer to the relevant user’s manual (Z248, Z249, Z262, Z271, Z272, Z278, Z279, and Z339). * When using the V680-D1KP52MT or V680-D2KF52M embedded in metal, use the V680-HS51/-HS52 Antenna. Communications will not be possible if the V680-HS63 Antenna is used. Communications will not be possible if the V680-HS65 Antenna is used with the V680-D1KP52MT, V680-D1KP53M, or V680-D2KF52M. Communication is also possible with RF Tags other than those of the V680 Series as long as they comply with ISO/IEC 18000-3 (ISO/IEC 15693). However, communication with RF Tags other than those of the V680 Series cannot be assured. The user must confirm communication capabilities carefully prior to use. Amplifier Unit Antenna EEP-ROM 1-kbyte V680- D1KP52MT V680- D1KP53M V680- D1KP54T V680- D1KP66T V680- D1KP66MT V680- D1KP66T- SP V680- D1KP58HTN V680- D1KP52M- BT@1 V680-HA63A V680-HAM42-DRT V680-HAM@1 V680-HS51 Yes Yes Yes V680-HS52-@ Yes Yes Yes Yes Yes Yes Yes V680-HS63-@ Yes* Yes Yes Yes Yes V680-HS65-@ Yes Yes Yes Yes Yes V680-HAM42-PRT V680-HS63-W Yes * Yes Yes Yes V680-HS65-W Yes Yes Yes V680-H01-V2 (Antenna with Built-in Amplifier) Yes Yes V680-CH@D (Handheld Reader Writer) Yes Yes Yes Yes Yes Yes Amplifier Unit Antenna FRAM 2-kbyte V680- D2KF52M V680- D2KF52M- BT@1 V680S- D2KF67 V680S- D2KF67M V680S- D2KF68 V680S- D2KF68M V680-HA63B V680-HAM42-DRT V680-HAM@1 V680-HS51 Yes Yes V680-HS52-@ Yes Yes Yes Yes V680-HS63-@ Yes* Yes Yes Yes Yes V680-HS65-@ Yes Yes Yes Yes V680-HAM42-PRT V680-HS63-W Yes Yes Yes Yes V680-HS65-W Yes Yes Yes Yes V680-H01-V2 (Antenna with Built-in Amplifier) Yes Yes V680-CH@D (Handheld Reader Writer) Yes Yes Yes Yes Yes Amplifier Unit Antenna FRAM 8-kbyte V680S- D8KF67 V680S- D8KF67M V680S- D8KF68 V680S- D8KF68M V680-HA63B V680-HAM42-DRT V680-HAM@1 V680-HS51 V680-HS52-@ Yes Yes V680-HS63-@ Yes Yes Yes Yes V680-HS65-@ Yes Yes Yes Yes V680-HAM42-PRT V680-HS63-W Yes Yes Yes Yes V680-HS65-W Yes Yes Yes Yes V680-H01-V2 (Antenna with Built-in Amplifier) Yes Yes V680-CH@D (Handheld Reader Writer) Yes Yes Yes Yes

Ordering Information

Place orders in units of boxes (containing 20 units). Type Memory capacity Appearance Size Metallic compatibility Model Battery-less 1 kbyte 8 dia. × 5 mm For embedding in metallic or non-metallic surface V680-D1KP52MT 10 dia. × 4.5 mm For embedding in metallic or non-metallic surface V680-D1KP53M dia. × 2.7 mm For flush mounting on non- metallic surface V680-D1KP54T 34 × 34 × 3.5 mm For flush mounting on metallic surface V680-D1KP66MT For flush mounting on non- metallic surface V680-D1KP66T 95 × 36.5 × 6.5 mm For flush mounting on non- metallic surface V680-D1KP66T-SP dia. × t10 mm For flush mounting on non- metallic surface V680-D1KP58HTN M10 × 12 mm For mounting as bolts V680-D1KP52M-BT01 * M8 × 12 mm V680-D1KP52M-BT11 * 2 kbytes 8 dia. × 5 mm For embedding in metallic or non-metallic surface V680-D2KF52M 40 × 40 × 5 mm For flush mounting on metallic surface V680S-D2KF67M For flush mounting on non- metallic surface V680S-D2KF67 86 × 54 × 10 mm For flush mounting on metallic surface V680S-D2KF68M For flush mounting on nonmetallic surface V680S-D2KF68 M10 × 12 mm For mounting as bolts V680-D2KF52M-BT01 * M8 × 12 mm V680-D2KF52M-BT11 * 8 kbytes 40 × 40 × 5 mm For flush mounting on metallic surface V680S-D8KF67M For flush mounting on non- metallic surface V680S-D8KF67 × 54 × 10 mm For flush mounting on metallic surface V680S-D8KF68M For flush mounting on nonmetallic surface V680S-D8KF68

Antenna (Detachable Amplifier Unit Type) Antenna with Built-in Amplifier * Use an Antenna Cable to connect the Antenna to the Controller. The maximum cable length is 30.5 m. Amplifier Unit ID Controller Type Appearance Size Cable length Model Cylindrical Standard cable, waterproof connector M22 × 65 mm 2 m V680-HS52-W 2M 12.5 m V680-HS52-W 12.5M Flexible cable, nonwaterproof connector 2 m V680-HS52-R 2M 12.5 m V680-HS52-R 12.5M Standard cable, nonwaterproof connector M12 × 35 mm 2 m V680-HS51 2M Square Standard cable, waterproof connector × 53 × 23 mm 2 m V680-HS63-W 2M 12.5 m V680-HS63-W 12.5M Flexible cable, nonwaterproof connector 2 m V680-HS63-R 2M 12.5 m V680-HS63-R 12.5M Standard cable, waterproof connector 100 × 100 × 30 mm 2 m V680-HS65-W 2M 12.5 m V680-HS65-W 12.5M Flexible cable, nonwaterproof connector 2 m V680-HS65-R 2M 12.5 m V680-HS65-R 12.5M Type Appearance Size Cable length Model Square 250 × 200 × 35 mm 0.5 m * V680-H01-V2 Type Appearance Size Cable length Model For 1-kbyte memory 25 × 40 × 65 mm 0.5 m V680-HA63A 0.5M 5 m V680-HA63A 5M 10 m V680-HA63A 10M For 2-/8-kbyte memory 0.5 m V680-HA63B 0.5M 5 m V680-HA63B 5M 10 m V680-HA63B 10M Type No. of connectable Amplifiers Appearance Size Communication interface Model DC power supply Single 105 × 90 × 65 mm RS232C, RS422/RS485 V680-CA5D01-V2 Dual V680-CA5D02-V2

When connected to the V680-H01: 0.28 A Amplifier-integrated Controller (DeviceNet ID Slave/PROFIBUS ID Slave) Amplifier-integrated Controllers (ID Flag Sensors) Special Interface Cables (for V680-HAM91 and V680-HAM81) Note: 1. The connectors are not waterproof. 2. The cable length can be extended to a maximum of 10 m. 3. Normally two Interface Cables are required for 1 Unit. If you do not need to write to ID Tags, or use the address shift or noise check functions, then one Interface Cable is sufficient. Handheld Reader Writers Type Appearance Connected ID System External power supply No. of unit numbers used Current consumption (A) Model

5 V 24 V External

1 Head

number 0.26 0.13 * − CJ1W-V680C11

2 Heads 2 unit

number 0.32 0.26 − CJ1W-V680C12 Type Appearance Connected ID System External power supply No. of unit numbers used Current consumption (A) Model

5 V 26 V External

1 Head − 1 unit

number 0.26 0.13 * − CS1W-V680C11

2 Heads 24 VDC 2 unit

number 0.32 − 0.36 CS1W-V680C12 Appearance Size Network Compatibility Model 65 × 65 × 65 mm DeviceNet V680-HAM42-DRT PROFIBUS V680-HAM42-PRT Type Appearance Size Model NPN output 90 × 30 × 65 mm V680-HAM91 PNP output V680-HAM81 Cable length Model Appearance 2 m V680-A60 2M 5 m V680-A60 5M 10 m V680-A60 10M Name Appearance Model Model with standard serial connector V680-CH1D Model with USB connector and 0.8-m cable V680-CHUD 0.8M Model with USB connector and 1.9-m cable V680-CHUD 1.9M Models for Zebra Technologies Handheld Terminal V680-CH1D-PSI AC Adapter (for V680-CH1D) V600-A22

Accessories (Order Separately) RF Tag Attachment Amplifier Unit Special Extension Cable (Amplifier Unit to Controller) Note: The cable can be extended up to 40 m. Up to two extension cables can be used. V680-H01 Antenna Special Cable (Antenna to Controller) Note: The cable can be extended up to 30 m. Only one extension cable can be used. RS-232C Communications Connector * An RS422/RS485 Communications Connector is attached to the Controller. ID Map Manager * Supported operating system: Windows 7 For details, consult your OMRON representative. Type Appearance Model For the V680-D1KP66T V600-A86 For the V680-D@KF68 V680-A81 To mount the V680- D1KP58HTN V680-A80 For the V680-D1KP54T V700-A80 Cable length Appearance Model 2 m V700-A40 2M 3 m V700-A41 3M 5 m V700-A42 5M 10 m V700-A43 10M 20 m V700-A44 20M 30 m V700-A45 30M Cable length Appearance Model 2 m V700-A40-W 2M 5 m V700-A40-W 5M 10 m V700-A40-W 10M 20 m V700-A40-W 20M 30 m V700-A40-W 30M Name Model Connector Plug XM3B-0922-111 Connector Hood XM2S-0911 Type Model Japanese version V680-A-IMMJP-P02 * English version V680-A-IMMEG-P02 * Chinese version V680-A-IMMCN-P02 *

RF Tag (1-kbyte Memory) Note: For details, refer to the User's Manual (Cat. No. Z262). *1. Refer to the User's Manual (Cat. No. Z262) for data retention time for temperatures of 85°C or higher. If the V680 has been sto red at 125°C or higher, write the data again even if the data does not need to be changed. *2. 150°C heat resistance: The heat resistance has been checked at 150°C for up to 1,000 hours, and thermal shock has been checked through testing 1,000 thermal cycles each of 30 minutes at −10/150°C. (Test samples: 22, defects: 0) *3. 180°C heat resistance: The heat resistance has been checked at 180°C for up to 200 hours, and thermal shock has been checked th rough testing 200 thermal cycles each of 30 minutes at −10°C/180°C. (Test samples: 22, defects: 0) *4. Oil resistance has been tested using a specific oil as defined in the OMRON test method. RF Tag with 1-kbyte Memory with High-temperature Capability *1 After storing data at high temperatures, rewrite the data even if changes are not required. High temperatures are those exceeding 125°C up to 250°C. *2 Storing RF Tags under high temperatures or under heat cycles will adversely affect the performance of the internal parts and the service life of the RF Tags. The RF Tag were placed in the following high temperatures and then evaluated in-house. It was confirmed that no problems occurred. 1. 2,000 cycles of 30 minutes each between room temperature and 200°C. 2. 500 hours at 250°C. *3 Oil resistance has been tested using a specific oil as defined in the OMRON test method. Model Item V680- D1KP52MT V680- D1KP54T V680- D1KP66T V680- D1KP66MT V680- D1KP53M V680- D1KP66T-SP Memory capacity 1,000 byte (user area) Memory type EEPROM Data retention time *1 10 years after writing (85°C max.) Write endurance 100,000 times per block (at 25°C) Ambient operating temperature (during communication) −25 to 85°C (with no icing) −25 to 70°C (with no icing) Ambient storage temperature (during data backup) −40 to 125°C (with no icing) Heat resistance: 1,000 thermal cycles each of 30 minutes at −10°C/150°C, High- temperature storage: 1,000 hours at 150°C *2 200 thermal cycles each of 30 minutes at −10°C/180°C, High- temperature storage: 200 hours at 180°C *3 −40 to 125°C (with no icing) −40 to 110°C (with no icing) Ambient operating humidity 35 to 95% Degree of protection IP68 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *4 IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *4 IP68 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *4 IP67 Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) (DIN698373) 95 × 36.5 × 6.5 mm (excluding protrusions) Materials Case: PPS resin Filling: Epoxy resin Molding: PPS resin Case: PPS resin Filling: Epoxy resin External resin: PFA Tag body: PPS resin Metallic compatibility Yes No No Yes Yes No Item Model V680-D1KP58HTN Memory capacity 1,000 bytes (user area) Memory type EEPROM Data Retention 10 years after writing (85°C or less), 0.5 year after writing (85°C to 125°C) Total data retention at high temperatures exceeding 125°C is 10 hours *1 Write Endurance 100,000 times per block (25°C) Ambient operating temperature −25°C to 85°C (with no icing) Ambient storage temperature −40 to 250°C (with no icing) *2 (Data retention: -40 to 125°C) 1. 2,000 cycles of 30 minutes each between room temperature and 200°C 2. 500 hours at 250°C Ambient storage humidity No restrictions. Degree of protection IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *3 Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude, acceleration: 150 m/s2, 10 sweeps each in X, Y, and Z directions for 15 minutes each Shock resistance 500 m/s2, 3 times each in X, Y, and Z directions (total: 18 times) Materials PPS resin Weight Approx. 70 g

RF Tag (2-kbyte Memory) Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z339). *1. Refer to the User's Manual (Cat. No. Z248) for data retention time for temperatures of 55°C or higher. *2. The total Read or Write communication frequency is called the access frequency. *3. Oil resistance has been tested using a specific oil as defined in the OMRON test method. RF Tag with 8-kbyte Memory Note: For details, refer to the User’s Manual (Cat. No. Z339). *1. The total Read or Write communication frequency is called the access frequency. *2. Oil resistance has been tested using a specific oil as defined in the OMRON test method. Item Model V680S-D2KF67 V680S-D2KF67M V680S-D2KF68 V680S-D2KF68M V680-D2KF52M Memory capacity 2,000 bytes (user area) Memory type FRAM Data retention time *1 10 years after writing at 85°C 10 years after writing (55°C max.) Write endurance One trillion writes for each block(85°C or less), Number of accesses *2: One trillion writes Access frequency per block *2: 10 billion times Ambient operating temperature −20 to 85°C (with no icing) −25 to 85°C (with no icing) Ambient storage temperature −40 to 125°C (with no icing) −40 to 85°C (with no icing) Ambient operating humidity 35 to 85% 35 to 95% Degree of protection IP68 (IEC 60529:2001), Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1 ) *3 IPX9K (DIN 40 050) IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *3 Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s 2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each No abnormality after application of 10 to 500 Hz, 1.5-mm double amplitude, acceleration: 100 m/s 2, 10 sweeps each in X, Y, and Z directions for 11 minutes each 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s 2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (Total:18 times) Appearance 40 × 40 × 5 mm 86 × 54 × 10 mm 8 dia. × 5 mm Materials Exterior: PPS resin Case: PPS resin Filling: Epoxy resin Metallic compatibility No Yes No Yes Yes Item Model V680S-D8KF67 V680S-D8KF67M V680S-D8KF68 V680S-D32KF68M Memory capacity 8,192 bytes (user area) Memory type FRAM Data retention time 10 years after writing (85°C or less) Write endurance 1 trillion times per block. *1 Access frequency : 1 trillion times: Ambient operating temperature −20 to 85°C (with no icing) Ambient storage temperature −40 to 125°C (with no icing) Ambient operating humidity 35 to 85% Degree of protection IP68 (IEC 60529:2001), Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *2 IPX9K (DIN 40 050) Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each 10 to 500 Hz, 1.5-mm double amplitude at 100 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 11 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Dimensions 40 × 40 × 4.5 mm 86 × 54 × 10 mm Materials Molding: PPS resin Metallic compatibility No Yes No Yes

Bolt RF Tags (1-kbyte Memory) * Oil resistance has been tested using a specific oil as defined in the OMRON test method. Bolt RF Tags (2-kbyte Memory) *1 The number of accesses is the total number of communications for reading or writing. *2 Oil resistance has been tested using a specific oil as defined in the OMRON test method. Item Model V680-D1KP52M-BT01 V680-D1KP52M-BT11 Memory capacity 1,000 bytes (user area) Memory type EEPROM Data retention time 10 years after writing (85°C or less), 0.5 years after writing (85 to 125°C) Total data retention at high temperatures exceeding 125°C is 10 houres Write endurance 100,000 times per block (at 25°C) Ambient operating temperature (during communication) −25 to 85°C (with no icing) Ambient storage temperature (during data backup) −40 to 125°C (with no icing) Ambient operating humidity 35 to 95% Degree of protection IP68 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) * Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Materials Bolt: SUS303, Case (RF Tag): PPS resin, Filling (RF Tag): Epoxy resin Weight Approx. 25 g Approx. 10 g Item Model V680-D2KF52M-BT01 V680-D2KF52M-BT11 Memory capacity 2,000 bytes (user area) Memory type FRAM Data retention time 10 years after writing (55°C or less), 2.9 years after writing (85°C max.) Write endurance 10 billion reads/writes per block, Number of accesses *1: 10 billion times Ambient operating temperature (during communication) −25°C to 85°C (with no icing) Ambient storage temperature (during data backup) −40°C to 85°C (with no icing) Ambient operating humidity 35 to 95% Degree of protection IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *2 Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Materials Bolt: SUS303, Case (RF Tag): PPS resin, Filling (RF Tag): Epoxy resin Weight Approx. 25 g Approx. 10 g

Cylindrical Antenna (Detachable Amplifier Unit Type) Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262). *1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM1030 standard. *2. The Connector is not waterproof. Oil resistance has been tested using a specific oil as defined in the OMRON test method. Square Antenna (Detachable Amplifier Unit Type) Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262). *1. The degree of protection for the Connector is IP67/IP65. Oil resistance has been tested using a specific oil as defined in the OMRON test method. *2. The Connector is not waterproof. Oil resistance has been tested using a specific oil as defined in the OMRON test method. Model Item V680-HS51 (Standard Cable, Non-waterproof Connector) V680-HS52-W (Standard Cable, Waterproof Connector) V680-HS52-R (Standard Cable, Non-waterproof Connector) Ambient operating temperature −10°C to 60°C (with no icing) Ambient storage temperature −25°C to 75°C (with no icing) Ambient operating humidity 35% to 95% (with no condensation) Insulation resistance 20 MΩ min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) *2 IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) Vibration resistance 10 to 2,000 Hz variable vibration, 1.5-mm double amplitude at 150 m/s acceleration, with 10 sweeps in X, Y, and Z directions for 15 minutes each 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each Shock resistance 1,000 m/s2 in X, Y, and Z directions 3 times each (18 times in total) 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance M12 × 35 mm M22 × 65 mm Materials ABS, brass, epoxy resin filling Weight Approx. 55 g (with 2-m cable) Approx. 850 g (with 12.5-m cable) Item Model V680-HS63-W (Standard Cable, Waterproof Connector) V680-HS63-R (Flexible Cable, Non-waterproof Connector) Ambient operating temperature −10°C to 60°C (with no icing) Ambient storage temperature −25°C to 75°C (with no icing) Ambient operating humidity 35% to 95% (with no condensation) Insulation resistance 20 MΩ min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 40 × 53 × 23 mm Materials ABS, epoxy resin filling Weight Approx. 850 g (with 12.5-m cable) Item Model V680-HS65-W (Standard Cable, Waterproof Connector) V680-HS65-R (Flexible Cable, Non-waterproof Connector) Ambient operating temperature −25°C to 70°C (with no icing) Ambient storage temperature −40°C to 85°C (with no icing) Ambient operating humidity 35% to 95% (with no condensation) Insulation resistance 20 MΩ min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 100 × 100 × 30 mm Materials ABS, epoxy resin filling Weight Approx. 1,100 g (with 12.5-m cable)

Square Antenna with Built-in Amplifier Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262). Amplifier Unit Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262). *1. When connected to the V680-HS@@-R or V680-HS52-R. *2. When connected to the V680-HS@@-W or V680-HS52-W. (Not including the Connector on the Controller.) ID Controller Note: For details, refer to the User's Manual (Cat. No. Z249). USB Port The USB port is used for a simple connection with a personal computer using a USB cable. The port complies with USB 1.1, and the USB cable uses a series A or series mini-B connector. A USB port driver must be separately provided. Consult with your OMRON representative for details. When connected to a host device via USB, the communications will use 1:1 protocol regardless of the setting of DIP switches 3 to 9. The USB port is not used for control purposes. When building a system, be sure to provide an RS-232C port or RS-422/RS-485C port. Item Model V680-H01-V2 Ambient operating temperature −10°C to 55°C (with no icing) Ambient storage temperature −35°C to 65°C (with no icing) Ambient operating humidity 35% to 85% (with no condensation) Insulation resistance 20 MΩ min. (at 100 VDC) between connector terminals and the rear plate Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between connector terminals and the rear plate Degree of protection IP63.(IEC60529); Mounting direction: Communications surface facing up Vibration resistance 10 to 150 Hz, 0.35-mm single amplitude, acceleration: 50 m/s 2, 10 sweeps in each of 3 axis directions (up/down, left/right, and forward/backward) for 8 minutes each Shock resistance 150 m/s2, 3 times each in 6 directions (Total: 18 times) Appearance 200 × 250 × 40 mm Material Polycarbonate (PC) resin, ASA resin / Rear Panel: Aluminum Weight Approx. 900 g Cable length 0.5 m (use a relay cable to connect to the Controller up to 30.5 m) Item Model V680-HA63A V680-HA63B Ambient operating temperature −10°C to 55°C (with no icing) Ambient storage temperature −25°C to 65°C (with no icing) Ambient operating humidity 35% to 85% (with no condensation) Insulation resistance 20 MΩ min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection IP40 (IEC60529) *1 IP67/IP65 (IEC60529) *2 Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s 2 acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 25 × 40 × 65mm (not including projections) Material Polycarbonate (PC) resin Weight Approx. 650 g (with 10-m cable) Cable length 5 m, 10 m Transmittable RF Tags 1-kbyte memory 2-, 8-kbyte memory Item Model V680-CA5D01-V2 V680-CA5D02-V2 Power supply voltage (Power consumption) 15 W max., 0.8 A max. Communications Specifications RS-232C, RS-422, RS-485 Input Specifications (Input voltage) RST, TRG1, and TRG2 24 VDC (+10% to −15%, including ripple) (PNP and NPN compatible) Output Specifications (Maximum switching capacity) RUN, BUSY/OUT3, ERROR/OUT4, OUT1, and OUT2

24 VDC (+10% to −15%, including ripple)

Ambient operating temperature −10 to 55°C (with no icing) Ambient storage temperature −25 to 65°C (with no icing) Ambient operating humidity 25% to 85% (with no condensation) Insulation resistance 20 MΩ min. (at 500 VDC) applied as follows: (1) Between power supply terminals and grounded case (2) Between ground and terminals Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute (1) Between power supply terminals and grounded case (2) Between ground and terminals Degree of protection Panel mounted (equivalent to IP20) Vibration resistance 10 to 150 Hz variable vibration, 0.2-mm double amplitude at 15 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each Shock resistance 150 m/s2 Appearance 105 × 90 × 65 mm (not including projections) Material Polycarbonate (PC) resin, ABS resin Weight Approx. 300 g Connectable Amplifier Units 12

When connected to the V680-H01: 280 mA. The V680-H01-V2 can be connected only to a 1-channel ID Sensor Unit. A 2-channel Unit cannot be used. Functional Specifications of ID Sensor Units Note: For details, refer to the User's Manual (Cat. No. Z271). * Cannot be used for communications with the V680-D1KP@@. Item Model CJ1W-V680C11 CJ1W-V680C12 CS1W-V680C11 CS1W-V680C12 Current consumpt ion Internal: 5 V 260 mA 320 mA 260 mA 320 mA Internal:

24 V/26 V

130 mA * 260 mA 125 mA * − External: 24 V −−− 360 mA Ambient operating temperature 0 to 55°C Ambient storage temperature −20°C to 75°C Ambient operating humidity 10% to 90% (with no condensation) Insulation resistance 20 mΩ min. at 500 VDC Dielectric strength 1,000 VAC for 1 minute Degree of protection Mounted in panel (IP30) Vibration resistance 10 to 57 Hz variable vibration, 0.075-mm double amplitude and 57 to 150 Hz variable vibration at 9.8 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each Shock resistance 147 m/s2 in X, Y, and Z directions 3 times each Appearance 31 × 65 × 90 mm (excluding protrusions) 35 × 130 × 101 mm (excluding protrusions) Item Model CJ1W-V680C11 CJ1W-V680C12 CS1W-V680C11 CS1W-V680C12 Communications control protocol Special protocol for CS, CJ and NJ PLCs Number of Antenna connections 1212 Commands Supported commands: Read, Write, Bit Set/Bit Clear, Mask Bit Write, Calculation Write, Data Fill, Data Check, Number of Writes Control, Copy (CJ1W-V680C12 and CS1W-V680C12 only), Read with Error Correction/Write with Error Correction, UID Read, and Noise Measurement. The following communications options are supported: Single trigger, Single auto, Repeat auto, FIFO trigger, FIFO repeat *, Multi-access trigger, and Multi-access repeat * Data transfer quantity 2,048 bytes max. (160 bytes/scan) Diagnostic function (1) CPU watchdog timer (2) Communications error detection with RF Tag (3) Antenna power supply error Monitoring/testing functions Tag communications can be tested in Test Mode. Status is displayed by LED indicators. Number of allocated words 10 words 20 words 10 words 20 words

Amplifier-integrated Controller (DeviceNet ID Slave/PROFIBUS ID Slave) Note: 1. For details, refer to the User's Manual (Cat. No. Z278). 2. The number of words allocated in the master depends on the Access Mode. Amplifier-integrated Controllers (ID Flag Sensors) Note: 1. For details, refer to the User’s Manual (Cat. No. Z279). 2. The connectors are not water resistant. If there is a possibility that water will be splashed onto the ID Sensor Unit, mount it inside of a control box. Also, be sure to use the V680 as a set with the V680-A60 Interface Cable (sold separately). Item Model V680-HAM42-DRT V680-HAM42-PRT Network compatibility DeviceNet PROFIBUS DP-V0 Connectable Antennas One channel (V680-HS@@) Rated voltage 24 VDC (−15% to 10%) including 10% ripple (p-p) Power consumption 4 W max. (Current consumption of 200 mA max. at power supply voltage of 24 VDC) Ambient operating temperature −10 to 55°C (with no icing) Ambient storage temperature −25 to 65°C (with no icing) Ambient operating humidity 25% to 85% (with no condensation; ambient operating temperature is 40°C max. at humidity of 85%) Insulation resistance 20 MΩ min. (at 500 VDC) between all terminals excluding the ground terminal and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between all terminals excluding the ground terminal and the case Vibration resistance 10 to 150 Hz, 0.2-mm double amplitude at 15 m/s2 acceleration with 10 sweeps in X, Y and Z directions for 8 minutes each Shock resistance 150 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 65 × 65 × 65 mm (excluding protrusions) Degree of protection IEC 60529, IP20 Materials Polycarbonate (PC) resin, ABS resin Weight Approx. 150 g Mounting DIN Track Item Model V680-HAM91 V680-HAM81 Rated voltage 24 VDC (−15% to +10%) including 10% ripple (p-p) Power consumption 3.5 W (24 VDC, 150 mA max. except external I/O line current) Input specifications Transistor output Short-circuit current: 3 mA (typical) (for short-circuit between IN terminal and 0 V), OFF voltage: 15 to 30 VDC, ON voltage: 0 to 5 VDC, Input impedance: 8.2 kΩ, Applied voltage: 30 VDC max. Output specifications NPN open-collector output 30 VDC, 20 mA max., Residual voltage: 2 V max. PNP open-collector output 30 VDC, 20 mA max., Residual voltage: 2 V max. Ambient operating temperature −10 to 55°C (with no icing) Ambient storage temperature −25 to 65°C (with no icing) Ambient operating humidity 25% to 85% (with no condensation; ambient operating temperature is 40°C max. at humidity of 85%) Insulation resistance 20 MΩ min. (at 500 VDC) between all terminals excluding the FG terminal and the case Dielectric strength 1,000 VAC (50/60 Hz) applied for 1 minute between all terminals excluding the FG terminal and the case Vibration resistance 10 to 150 Hz, 0.2-mm double amplitude at 15 m/s2 acceleration with 10 sweeps in X, Y and Z directions for 8 minutes each Shock resistance 150 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 90 × 30 × 65 mm (excluding protrusions) Degree of protection IEC 60529, IP40 Materials Polycarbonate (PC) resin, ABS resin Weight Approx. 130 g Mounting DIN Track

Note: Refer to the User’s Manual (Cat. No. Z272) for details. Contact your OMRON sales representative for details on drivers for Windows. * This does not include the connector section. The main unit is not resistant to chemical or oils. AC Adapter (for V680-CH1D) Item Model V680-CHUD 0.8M V680-CHUD 1.9M V680-CH1D V680-CH1D-PSI Power supply voltage 5 VDC ± 5% (at the connector section of the product) Current consumption 500 mA max. (for a power supply voltage of 5.0 V) Communications specifications USB (Series A plug) Ver.1.1 RS-232C (D-SUB 9-pin) compatible with IBM PC/ AT) RS-232C (D-SUB 9-pin) Ambient operating temperature during communication 0 to +40°C Ambient storage temperature −25 to +65°C Ambient operating humidity during communication 35% to 85% (with no condensation) Insulation resistance 50 MΩ min. (at 500 VDC) between connector and case Dielectric strength 1,000 VAC, 50/60 Hz for 1 min (leakage current: 1 mA max.) between connectors and case Degree of protection IEC 60529: IP63 * Vibration resistance Destruction: 10 to 150 Hz variable vibration, 0.2-mm double amplitude and 15 m/s2 acceleration with 10 sweeps for 8 min each in 6 directions Shock resistance Destruction: 150 m/s2, 3 times each in X, Y, and Z directions Weight Approx. 110 g (including connector and cable) Approx. 140 g (including connector and cable) Approx. 170 g (including connector and cable) Approx. 120 g (including connector and cable) Cable length 0.8 m 1.9 m 2.5 m 0.8 m Item Model V600-A22 Input voltage 100 to 120 VAC at 50/60 Hz Input current AC: 300 mA (at load current of 2.0 A) Output voltage DC5V ± 0.25V Ambient operating temperature 0 to +40°C Ambient storage temperature −20 to +85°C (with no icing) Ambient operating humidity 5% to 95% (with no condensation) Insulation resistance 100 MΩ min. (at 500 VDC) between input terminals and output terminals Dielectric strength 2,000 V for 1 minute between input terminals and output terminals with a current leakage of 10 mA max. Weight Approx. 70 g Applicable standards UL

Communication Specifications ID Controllers (V680-CA5D01-V2/V680-CA5D02-V2) RF Tag (1-kbyte Memory) Communication *1. When using the V680-D1KP52MT/-D1KP53M embedded in metal, use the V680-HS51/-HS52 Antenna. Communications will not be possible with a V680-HS63 Antenna. *2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. Recommended combination Function Communication range (unit: mm) RF Tag and Antenna mounting conditionsRF Tag Antenna V680-D1KP52MT V680-HS51 Read distance 0.5 to 6.5 (axis offset ±2) Write distance 0.5 to 6.0 (axis offset ±2) V680-HS52 Read distance 0 to 9.0 (axis offset ±2) Write distance 0 to 8.5 (axis offset ±2) V680-HS63 Read distance 0 to 12.0 (axis offset ±2) Write distance 0 to 9.5 (axis offset ±2) V680-D1KP52MT (embedded in metallic surface: steel) V680-HS51 Read distance 0.5 to 3.5 *1 (axis offset ±2) Write distance 0.5 to 3.0 *1 (axis offset ±2) V680-HS52 Read distance 0 to 4.5 *1 (axis offset ±2) Write distance 0 to 4.0 *1 (axis offset ±2) V680-D1KP53M V680-HS51 Read distance 0.5 to 6.5 (axis offset ±2) Write distance 0.5 to 6.0 (axis offset ±2) V680-HS52 Read distance 0 to 9.0 (axis offset ±2) Write distance 0 to 8.5 (axis offset ±2) V680-D1KP53M (embedded in metallic surface : steel) V680-HS51 Read distance 0.5 to 3.5 *1 (axis offset ±2) Write distance 0.5 to 3.0 *1 (axis offset ±2) V680-HS52 Read distance 0 to 4.5 *1 (axis offset ±2) Write distance 0 to 4.0 *1 (axis offset ±2) V680-D1KP52MT V680-HS51 Metallic Non-metallic Resin, plastic, wood, etc. V680-D1KP52MT V680-HS52 Non-metallic Non-metallic Resin, plastic, wood, etc. Non-metallic V680-HS63 V680- D1KP52MT Non-metallic Resin, plastic, wood, etc. Metallic V680-D1KP52MT Metallic V680-HS51 V680-D1KP52MT Metallic V680-HS52 Non-metallic*2 V680-D1KP53M V680-HS51 Metallic Non-metallic Resin, plastic, wood, etc. V680-D1KP53M V680-HS52 Non-metallic Non-metallic Resin, plastic, wood, etc. Metallic V680-D1KP53M Metallic V680-HS51 V680-D1KP53M Metallic V680-HS52 Non-metallic*2

Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User’s Manual (Cat. No. Z248 or Z262). *1. The communication range may be reduced if the V680-D1KP66T/-D1KP54T is mounted onto a metallic surface. Refer to the User's Manual (Cat. No. Z262) for details. *2. The Antenna can be mounted in metal, but the communication range will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. Recommended combination Function Communication range (unit: mm) RF Tag and Antenna mounting conditionsRF Tag Antenna V680-D1KP54T V680-HS52 Read distance 0 to 17.0 *1 (axis offset ±2) Write distance 0 to 15.0 *1 (axis offset ±2) V680-HS63 Read distance 0 to 24.0 *1 (axis offset ±10) Write distance 0 to 20.0 *1 (axis offset ±10) V680-HS65 Read distance 0 to 33.0 *1 (axis offset ±10) Write distance 0 to 28.0 *1 (axis offset ±10) V680-D1KP66T V680-HS52 Read distance 0 to 17.0 *1 (axis offset ±2) Write distance 0 to 17.0 *1 (axis offset ±2) V680-HS63 Read distance 0 to 30.0 *1 (axis offset ±10) Write distance 0 to 25.0 *1 (axis offset ±10) V680-HS65 Read distance 0 to 47.0 *1 (axis offset ±10) Write distance 0 to 42.0 *1 (axis offset ±10) V680-H01-V2 Read distance 0 to 100.0 *1 (axis offset ±2) Write distance 0 to 100.0 *1 (axis offset ±2) V680-D1KP54T V680-HS52 Non-metallic Non-metallic Resin, plastic, wood, etc. V680-D1KP54T V680-HS63 Non-metallic Non-metallic Resin, plastic, wood, etc. V680-D1KP54T V680-HS65 Non-metallic Metallic Resin, plastic, wood, etc. V680-HS52 Non-metallic Non-metallic V680-D1KP66T Resin, plastic, wood, etc. V680-HS63 V680- D1KP66T Non-metallic Non-metallic Resin, plastic, wood, etc. V680-HS65 V680- D1KP66T Metallic Non-metallic Resin, plastic, wood, etc. V680-H01-V2 V680-D1KP66T Non-metallic Non-metallic*2

Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User’s Manual (Cat. No. Z248 or Z262). *2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. High-temperature RF Tag (1-kbyte Memory) Communication Recommended combination Function Communication range (unit: mm) RF Tag and Antenna mounting conditionsRF Tag Antenna V680-D1KP66MT (flush-mounted on metallic surface: steel) V680-HS52 Read distance 0 to 16.0 (axis offset ±2) Write distance 0 to 14.0 (axis offset ±2) V680-HS63 Read distance 0 to 25.0 (axis offset ±10) Write distance 0 to 20.0 (axis offset ±10) V680-HS65 Read distance 0 to 25.0 (axis offset ±10) Write distance 0 to 20.0 (axis offset ±10) V680-D1KP66T-SP V680-HS52 Read distance 0 to 15.0 *1 (axis offset ±2) Write distance 0 to 15.0 *1 (axis offset ±2) V680-HS63 Read distance 0 to 25.0 *1 (axis offset ±10) Write distance 0 to 20.0 *1 (axis offset ±10) V680-HS65 Read distance 0 to 42.0 *1 (axis offset ±10) Write distance 0 to 37.0 *1 (axis offset ±10) Recommended combination Function Communication range (unit: mm) RF Tag and Antenna mounting conditionsRF Tag Antenna V680-D1KP58HTN V680-HS65 Read distance 0 to 55 (axis offset ±10) Write distance 0 to 55 (axis offset ±10) V680-H01-V2 Read distance 0 to 150.0 (axis offset ±10) Write distance 0 to 150.0 (axis offset ±10) V680-D1KP66MT MetallicNon-metallic V680-HS52 V680-HS63 V680- D1KP66MT Metallic Non-metallic*2 V680-HS65 V680- D1KP66MT Metallic Metallic V680-HS52 Non-metallic Non-metallic V680-D1KP66T-SP Resin, plastic, wood, etc. V680-HS63 V680- D1KP66T -SP Non-metallic V680-HS63 Resin, plastic, wood, etc. V680-HS65 V680- D1KP66T -SP Metallic Non-metallic Resin, plastic, wood, etc. V680-HS65 V680-D1KP58HTN Communication range Metal Non-metallic material V680-H01-V2 V680-D1KP58HTN Communication range Non-metallic material Non-metallic material

RF Tag (2-kbyte Memory) Communication Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User’s Manual (Cat. No. Z248 or Z262). *2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. Recommended combination Function Communication range (unit: mm) RF Tag and Antenna mounting conditionsRF Tag Antenna V680S-D2KF67 V680-HS52 Read distance 0 to 17.0 *1 (axis offset ±2) Write distance 0 to 17.0 *1 (axis offset ±2) V680-HS63 Read distance 7.0 to 30.0 *1 (axis offset ±10) Write distance 7.0 to 30.0 *1 (axis offset ±10) V680-HS65 Read distance 0 to 42.0 *1 (axis offset ±10) Write distance 0 to 42.0 *1 (axis offset ±10) V680-H01-V2 Read distance 0 to 100.0 *1 (axis offset ±10) Write distance 0 to 100.0 *1 (axis offset ±10) V680S-D2KF67M (flush-mounted on metallic surface: steel) V680-HS52 Read distance 0 to 16.0 (axis offset ±2) Write distance 0 to 16.0 (axis offset ±2) V680-HS63 Read distance 6.0 to 25.0 (axis offset ±10) Write distance 6.0 to 25.0 (axis offset ±10) V680-HS65 Read distance 0 to 25.0 (axis offset ±10) Write distance 0 to 25.0 (axis offset ±10) Non-metallic Non-metallic Resin, plastic, wood, etc.V680-HS52 V680S-D2KF67 Non-metallic Non-metallic Resin, plastic, wood, etc. V680-HS63 V680S- D2KF67 Non-metallic Metallic V680-HS65 Resin, plastic, wood, etc. V680S- D2KF67 Non-metallic Non-metallic V680-H01-V2 V680S-D2KF67 *2Non-metallic Metallic V680-HS52 V680S-D2KF67M Metallic Non-metallic V680S-HS63 V680S- D2KF67M Metallic Metallic V680-HS65 V680S- D2KF67M

Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User’s Manual (Cat. No. Z248 or Z262). * The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. Recommended combination Function Communication range (unit: mm) RF Tag and Antenna mounting conditionsRF Tag Antenna V680S-D2KF68 V680-HS63 Read distance 0 to 45.0 axis offset ±10) Write distance 0 to 45.0 axis offset ±10) V680-HS65 Read distance 0 to 75.0 axis offset ±10) Write distance 0 to 75.0 axis offset ±10) V680-H01-V2 Read distance 0 to 150.0 axis offset ±10) Write distance 0 to 150.0 axis offset ±10) V680S-D2KF68M V680-HS63 Read distance 0 to 35.0 axis offset ±10) Write distance 0 to 35.0 axis offset ±10) V680-HS65 Read distance 0 to 55.0 axis offset ±10) Write distance 0 to 55.0 axis offset ±10) V680-D2KF52M V680-HS51 Read distance 0.5 to 5.5 (axis offset ±2) Write distance 0.5 to 5.5 (axis offset ±2) V680-HS52 Read distance 0 to 8.0 (axis offset ±2) Write distance 0 to 8.0 (axis offset ±2) V680-HS63 Read distance 0 to 9.5 (axis offset ±2) Write distance 0 to 9.5 (axis offset ±2) V680-D2KF52M (embedded in metallic surface: steel) V680-HS51 Read distance 0 to 3.5 (axis offset ±2) Write distance 0 to 3.5 (axis offset ±2) V680-HS52 Read distance 0 to 3.0 (axis offset ±2) Write distance 0 to 3.0 (axis offset ±2) Non-metallic Non-metallic V680-HS63 V680S- D2KF68 Resin, plastic, wood, etc. Resin, plastic, wood, etc. V680-HS65 V680S- D2KF68 Non-metallic Resin, plastic, wood, etc. Metallic V680-H01-V2 V680S- D2KF68 Non-metallic Resin, plastic, wood, etc. Non-metallic V680-HS63 V680S- D2KF68M Non-metallic Resin, plastic, wood, etc. Metallic V680-HS65 V680S- D2KF68M Metallic Metallic V680-D2KF52M V680-HS51 Metallic Non-metallic Resin, plastic, wood, etc. V680-D2KF52M V680-HS52 Non-metallic Non-metallic Resin, plastic, wood, etc. Non-metallic V680-HS63 V680- D2KF52M Non-metallic Resin, plastic, wood, etc. V680-D2KF52M V680-HS51 Metallic Metallic V680-D2KF52M V680-HS52 Metallic Non-metallic*

RF Tag (8-kbyte Memory) Communication Recommended combination Function Communication range (unit: mm) RF Tag and Antenna mounting conditionsRF Tag Reader Writer V680S-D8KF67 V680-HS52 Read distance 0 to 17.0 (axis offset ±2) Write distance 0 to 17.0 (axis offset ±2) V680-HS63 Read distance 7.0 to 30.0 (axis offset ±10) Write distance 7.0 to 30.0 (axis offset ±10) V680-HS65 Read distance 0 to 42.0 (axis offset ±10) Write distance 0 to 42.0 (axis offset ±10) V680-H01-V2 Read distance 0 to 100.0 (axis offset ±10) Write distance 0 to 100.0 (axis offset ±10) V680S-D8KF67M V680-HS52 Read distance 0 to 16.0 (axis offset ±2) Write distance 0 to 16.0 (axis offset ±2) V680-HS63 Read distance 6.0 to 25.0 (axis offset ±10) Write distance 6.0 to 25.0 (axis offset ±10) V680-HS65 Read distance 0 to 25.0 (axis offset ±10) Write distance 0 to 25.0 (axis offset ±10) V680S-D8KF67 V680- HS52 Non-metallic Resin, plastic, wood, etc.Non-metallic V680S- D8KF67 V680-HS63 Non-metallic Non-metallic Resin, plastic, wood, etc. V680S- D8KF67 V680-HS65 Non-metallic Resin, plastic, wood, etc. Metallic V680S- D8KF67 V680-H01-V2 Non-metallicNon-metallic V680S-D8KF67M V680- HS52 MetallicNon-metallic V680S- D8KF67M V680-HS63 Metallic Non-metallic V680S- D8KF67M V680-HS65 Metallic Metallic Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User’s Manual (Cat. No. Z248 or Z262).

Bolt RF Tag (1-kbyte or 2-kbyte Memory) Communication * Mounting can be performed in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. Recommended combination Function Communication range (unit: mm) RF Tag and Antenna mounting conditionsRF Tag Antenna V680-D1KP52M-BT01/ -BT11 V680-HS51 Read distance 0.5 to 2.5 (axis offset ±2) Write distance 0.5 to 2.0 (axis offset ±2) V680-HS52 Read distance 0.5 to 3.0 (axis offset ±2) Write distance 0.5 to 2.5 (axis offset ±2) V680-D2KF52M-BT01/ -BT11 V680-HS51 Read distance 0.5 to 2.5 (axis offset ±2) Write distance 0.5 to 2.5 (axis offset ±2) V680-HS52 Read distance 0.5 to 2.0 (axis offset ±2) Write distance 0.5 to 2.0 (axis offset ±2) V680-D1KP52M-BT01/-BT11 Metallic V680-HS51 Metallic/Non-metallic V680-D1KP52M-BT01/-BT11 V680-HS52 Non-Metallic Metallic/Non-metallic* V680-D2KF52M-BT01/-BT11 V680-HS51 Metallic Metallic/Non-metallic V680-D2KF52M-BT01/-BT11 V680-HS52 Non-Metallic Metallic/Non-metallic*

DeviceNet ID Slave (V680-HAM42-DRT) PROFIBUS ID Slave (V680-HAM42-PRT) ID Flag Sensors (V680-HAM91/-HAM81) RF Tag (1-kbyte Memory) Communication Recommended combination Function Communication range (unit: mm) RF Tag and Antenna mounting conditions RF Tag Antenna V680-D1KP52MT V680-HS51 Read distance 0.5 to 6.5 (axis offset ±2) Write distance 0.5 to 6.0 (axis offset ±2) V680-HS52 Read distance 0.5 to 9.0 (axis offset ±2) Write distance 0.5 to 8.5 (axis offset ±2) V680-HS63 Read distance 0.5 to 12.0 (axis offset ±2) Write distance 0.5 to 9.5 (axis offset ±2) V680-D1KP52MT (embedded in metallic surface: steel) V680-HS51 Read distance 0.5 to 3.5 (axis offset ±2) Write distance 0.5 to 3.0 (axis offset ±2) V680-HS52 Read distance 0.5 to 4.5 (axis offset ±2) Write distance 0.5 to 4.0 (axis offset ±2) V680-D1KP53M V680-HS51 Read distance 0.5 to 6.5 (axis offset ±2) Write distance 0.5 to 6.0 (axis offset ±2) V680-HS52 Read distance 0.5 to 9.0 (axis offset ±2) Write distance 0.5 to 8.5 (axis offset ±2) V680-D1KP53M (embedded in metallic surface : steel) V680-HS51 Read distance 0.5 to 3.5 (axis offset ±2) Write distance 0.5 to 3.0 (axis offset ±2) V680-HS52 Read distance 0.5 to 4.5 (axis offset ±2) Write distance 0.5 to 4.0 (axis offset ±2) V680-D1KP52MT V680-HS51 Metallic Non-metallic Resin, plastic, wood, etc. V680-D1KP52MT V680-HS52 Non-metallic Non-metallic Resin, plastic, wood, etc. Non-metallic V680-HS63 V680- D1KP52MT Non-metallic Resin, plastic, wood, etc. Metallic V680-D1KP52MT Metallic V680-HS51 Non-metallic V680-D1KP52MT Metallic V680-HS52 V680-HS51 V680-D1KP53M Non-metallic (Resin, plastic, wood, etc.) Metallic V680-HS52 V680-D1KP53M Non-metallic (Resin, plastic, wood, etc.) Non-metallic V680-HS51 V680-D1KP53MMetallic Metallic V680-HS52 V680-D1KP53MNon-metallic Metallic

Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User's Manual (Cat. No. Z278 or Z279). *2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User's Manual (Cat. No. Z278 or Z279). *2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. V680-D1KP66T V680-HS52 Read distance 1.0 to 17.0 *1 (axis offset ±2) Write distance 1.0 to 17.0 *1 (axis offset ±2) V680-HS63 Read distance 5.0 to 30.0 *1 (axis offset ±10) Write distance 5.0 to 25.0 *1 (axis offset ±10) V680-HS65 Read distance 5.0 to 47.0 *1 (axis offset ±10) Write distance 5.0 to 42.0 *1 (axis offset ±10) Recommended combination Function Communication range (unit: mm) RF Tag and Antenna mounting conditions RF Tag Antenna V680-D1KP66MT (flush-mounted on metallic surface: steel) V680-HS52 Read distance 1.0 to 16.0 (axis offset ±2) Write distance 1.0 to 14.0 (axis offset ±2) V680-HS63 Read distance 5.0 to 25.0 (axis offset ±2) Write distance 5.0 to 20.0 (axis offset ±2) V680-HS65 Read distance 5.0 to 25.0 (axis offset ±10) Write distance 5.0 to 20.0 (axis offset ±10) V680-D1KP66T-SP V680-HS52 Read distance 1.0 to 15.0 *1 (axis offset ±2) Write distance 1.0 to 15.0 *1 (axis offset ±2) V680-HS63 Read distance 5.0 to 25.0 *1 (axis offset ±10) Write distance 5.0 to 20.0 *1 (axis offset ±10) V680-HS65 Read distance 5.0 to 42.0 *1 (axis offset ±10) Write distance 5.0 to 37.0 *1 (axis offset ±10) Recommended combination Function Communication range (unit: mm) RF Tag and Antenna mounting conditions RF Tag Antenna V680-HS52 Non-metallic Non-metallic V680-D1KP66T Resin, plastic, wood, etc. V680-HS63 V680- D1KP66T Non-metallic Non-metallic Resin, plastic, wood, etc. V680-HS65 V680- D1KP66T Metallic Non-metallic Resin, plastic, wood, etc. V680-D1KP66MT MetallicNon-metallic V680-HS52 V680-HS63 V680- D1KP66MT Metallic Non-metallic*2 V680-HS65 V680- D1KP66MT Metallic Metallic V680-HS52 Non-metallic Non-metallic V680-D1KP66T-SP Resin, plastic, wood, etc. V680-HS63 V680- D1KP66T -SP Non-metallic Non-metallic Resin, plastic, wood, etc. V680-HS65 V680- D1KP66T -SP Metallic Non-metallic Resin, plastic, wood, etc.

RF Tag (2-kbyte Memory) Communication Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User's Manual (Cat. No. Z278 or Z279). *2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. Recommended combination Function Communication range (unit: mm) RF Tag and Antenna mounting conditionsRF Tag Antenna V680S-D2KF67 V680-HS52 Read distance 1.0 to 17.0 *1 (axis offset ±2) Write distance 1.0 to 17.0 *1 (axis offset ±2) V680-HS63 Read distance 7.0 to 30.0 *1 (axis offset ±10) Write distance 7.0 to 30.0 *1 (axis offset ±10) V680-HS65 Read distance 5.0 to 42.0 *1 (axis offset ±10) Write distance 5.0 to 42.0 *1 (axis offset ±10) V680S-D2KF67M (flush-mounted on metallic surface: steel) V680-HS52 Read distance 1.0 to 16.0 (axis offset ±2) Write distance 1.0 to 16.0 (axis offset ±2) V680-HS63 Read distance 6.0 to 25.0 (axis offset ±10) Write distance 6.0 to 25.0 (axis offset ±10) V680-HS65 Read distance 5.0 to 25.0 (axis offset ±10) Write distance 5.0 to 25.0 (axis offset ±10) V680S-D2KF68 V680-HS63 Read distance 5.0 to 45.0 axis offset ±10) Write distance 5.0 to 45.0 axis offset ±10) V680-HS65 Read distance 5.0 to 75.0 axis offset ±10) Write distance 5.0 to 75.0 axis offset ±10) Non-metallic Non-metallic Resin, plastic, wood, etc. V680S-D2KF67 V680-HS52 Non-metallic Non-metallic Resin, plastic, wood, etc. V680-HS63 V680S- D2KF67 Non-metallic Metallic Resin, plastic, wood, etc. V680S- D2KF67 V680-HS65 Non-metallic Metallic V680-HS52 V680S-D2KF67M Metallic Non-metallic V680-HS63 V680S- D2KF67M Metallic V680-HS65 Metallic V680S- D2KF67M V680-HS63 V680S- D2KF68 Non-metallic Resin, plastic, wood, etc. Non-metallic Resin, plastic, wood, etc. V680-HS65 V680S- D2KF68 Non-metallic Metallic Resin, plastic, wood, etc.

The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. Recommended combination Function Communication range (unit: mm) RF Tag and Antenna mounting conditionsRF Tag Antenna V680S-D2KF68M V680-HS63 Read distance 5.0 to 35.0 axis offset ±10) Write distance 5.0 to 35.0 axis offset ±10) V680-HS65 Read distance 5.0 to 55.0 axis offset ±10) Write distance 5.0 to 55.0 axis offset ±10) V680-D2KF52M V680-HS51 Read distance 0.5 to 5.5 (axis offset ±2) Write distance 0.5 to 5.5 (axis offset ±2) V680-HS52 Read distance 0.5 to 8.0 (axis offset ±2) Write distance 0.5 to 8.0 (axis offset ±2) V680-HS63 Read distance 0.5 to 9.5 (axis offset ±2) Write distance 0.5 to 9.5 (axis offset ±2) V680-D2KF52M (embedded in metallic surface: steel) V680-HS51 Read distance 0.5 to 3.5 (axis offset ±2) Write distance 0.5 to 3.5 (axis offset ±2) V680-HS52 Read distance 0.5 to 3.0 (axis offset ±2) Write distance 0.5 to 3.0 (axis offset ±2) V680-HS63 V680S- D2KF68M Non-metallic Metallic Resin, plastic, wood, etc. V680-HS65 V680S- D2KF68M Metallic Metallic V680-D2KF52M V680-HS51 Metallic Non-metallic Resin, plastic, wood, etc. V680-D2KF52M V680-HS52 Non-metallic Non-metallic Resin, plastic, wood, etc. Metallic V680-HS63 V680- D2KF52M Metallic Resin, plastic, wood, etc. V680-D2KF52M V680-HS51 Metallic Metallic V680-D2KF52M V680-HS52 Metallic Non-metallic*

RF Tag (8-kbyte Memory) Communication Recommended combination Function Communication range (unit: mm) RF Tag and Antenna mounting conditionsRF Tag Reader Writer V680S-D8KF67 V680-HS52 Read distance 1.0 to 17.0 (axis offset ±2) Write distance 1.0 to 17.0 (axis offset ±2) V680-HS63 Read distance 7.0 to 30.0 (axis offset ±10) Write distance 7.0 to 30.0 (axis offset ±10) V680-HS65 Read distance 5.0 to 42.0 (axis offset ±10) Write distance 5.0 to 42.0 (axis offset ±10) V680S-D8KF67M (flush-mounted on metallic surface: steel) V680-HS52 Read distance 1.0 to 16.0 (axis offset ±2) Write distance 1.0 to 16.0 (axis offset ±2) V680-HS63 Read distance 6.0 to 25.0 (axis offset ±10) Write distance 6.0 to 25.0 (axis offset ±10) V680-HS65 Read distance 5.0 to 25.0 (axis offset ±10) Write distance 5.0 to 25.0 (axis offset ±10) V680S-D8KF68 V680-HS63 Read distance 5.0 to 45.0 (axis offset ±10) Write distance 5.0 to 45.0 (axis offset ±10) V680-HS65 Read distance 5.0 to 75.0 (axis offset ±10) Write distance 5.0 to 75.0 (axis offset ±10) V680- HS52 V680S-D8KF67 Non-metallic Resin, plastic, wood, etc.Non-metallic V680-HS63 V680S- D8KF67 Non-metallic Resin, plastic, wood, etc. Non-metallic V680-HS65 V680S-D8KF67 Non-metallic Resin, plastic, wood, etc. Metallic V680- HS52 V680S-D8KF67M Non-metallic Metallic V680-HS65 V680S- D8KF67M Non-metallic Metallic V680-HS65 V680S- D8KF67M Metallic Metallic V680-HS63 V680S-D8KF68 Non-metallic Resin, plastic, wood, etc. Non-metallic Resin, plastic, wood, etc. V680S- D8KF68 V680-HS65 Non-metallic Resin, plastic, wood, etc. Metallic

Characteristic Data (for Reference Only) Communication range (for Reference Only) (unit: mm) ID Controller (using the V680-CA5D0@-V2, CJ1W-V680C11/C12, or CS1W-V680-C11/C12) 1-kbyte Memory RF Tag The values given for communications ranges are reference values. Refer to pages 16 to 18, 23 for communications distance specifications. The communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS52 (embedded in non-metallic material) & V680-D1KP52MT (embedded in non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP52MT (embedded in metallic surface: steel) V680-HS51 (embedded in metallic material) & V680-D1KP52MT (embedded in non-metallic material) V680-HS51 (embedded in metallic material) & V680-D1KP52MT (embedded in metallic surface: steel) V680-HS63 (mounted on non-metallic material) & V680-D1KP52MT (embedded in non-metallic material) V680-HS51 (embedded in metallic material) & V680-D1KP53M (embedded in non-metallic material) V680-HS51 (embedded in metallic material) & V680-D1KP53M (embedded in metallic surface: steel) V680-HS52 (embedded in non-metallic material) & V680-D1KP53M (embedded in non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP53M (embedded in metallic surface: steel) 0–30–40 –20 –10 10 20 30 X Y Read Write X Y 0–30–40 –20 –10 10 20 30 X Y Read Write X Y 0–30–40 –20 –10 10 20 30 X Y X Y Read Write 0–30–40 –20 –10 10 20 30 X Y Read Write X Y 0–30–40 –20 –10 10 20 30 X Y Read Write X Y 0–30–40 –20 –10 10 20 30 X Y Read Write 0–30–40 –20 –10 10 20 30 X Y Read Write 0–30–40 –20 –10 10 20 30 X Y Read Write 0–30–40 –20 –10 10 20 30 X Y Read Write

V680-HS52 (embedded in non-metallic material) & V680-D1KP54T (mounted on non-metallic material) V680-HS63 (mounted on non-metallic material) & V680-D1KP54T (mounted on non-metallic material) V680-HS65 (mounted on metallic material) & V680-D1KP54T (mounted on non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP66T (mounted on non-metallic material) V680-HS63 (mounted on non-metallic material) & V680-D1KP66T (mounted on non-metallic material) V680-HS65 (mounted on metallic material) & V680-D1KP66T (mounted on non-metallic material) V680-H01-V2 (mounted on non-metallic material) & V680-D1KP66T (mounted on non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP66T-SP (mounted on non-metallic material) V680-HS63 (mounted on non-metallic material) & V680-D1KP66T-SP (mounted on non-metallic material) 0–30–40 –20 –10 10 20 30 X Y Read Write 0–30–40 –20 –10 10 20 30 X Y Read Write 0–60–100 –40 –20 20 40 60 X–80 80 100 Y Read Write 0–60–100 –40 –20 20 40 60 X–80 80 100 Y Read Write X Y 0–60–100 –40 –20 20 40 60 X–80 80 100 Y Read Write X Y 0–60–100 –40 –20 20 40 60 X–80 80 100 Y Read Write 0–150–250 –100 –50 50 100 150 X–200 200 100 150 200 Y Read Write Y X 0–30–40 –20 –10 10 20 30 X Y Read Write X Y 0–60–100 –40 –20 20 40 60 X–80 80 100 Y X Y Read Write

1-kbyte Memory Bolt RF Tags High-temperature Type 1-kbyte Memory RF Tags V680-HS65 (mounted on metallic material) & V680-D1KP66T-SP (mounted on non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP66MT (mounted on metallic surface: steel) V680-HS63 (mounted on non-metallic material) & V680-D1KP66MT (mounted on metallic surface: steel) V680-HS65 (mounted on metallic material) & V680-D1K66MT (mounted on metallic surface: steel) V680-HS51 (embedded in metallic material) & V680-D1KP52M-BT01 (mounted in metal/non-metallic material) V680-HS51 (embedded in metallic material) & V680-D1KP52M-BT11 (mounted in metal/non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP52M-BT01 (mounted in metal/non-metallic material) V680-HS65 (with metal on back surface) & V680-D1KP58HTN V680-H01-V2 and V680-D1KP58HTN 0–60–100 –40 –20 20 40 60 X–80 80 100 Y Read Write 0–30–40 –20 –10 10 20 30 X Y Read Write X Y 0–60–100 –40 –20 20 40 60 X–80 80 100 Y Read Write X Y 0–60–100 –40 –20 20 40 60 X–80 80 100 Y Read Write 0–30–40 –20 –10 10 20 30 X Y X Y 0–30–40 –20 –10 10 20 30 X Y X Y 0–30–40 –20 –10 10 20 30 X Y X Y -250 -200 -150 -100 -50 0 50 100 150 200 X Read Write Y 200 150 100 -250 -200 -150 -100 -50 0 50 100 150 200 X Read Write Y 200 150 100

The values given for communications ranges are reference values. Refer to pages 19 to 20, 23 for communications distance specifications. The communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS63 (mounted on non-metallic material) & V680S-D2KF67 (mounted on non-metallic material) V680-HS65 (mounted on metallic material) & V680S-D2KF67 (mounted on non-metallic material) V680-H01-V2 (mounted on non-metallic material) & V680S-D2KF67 (mounted on non-metallic material) V680-HS52 (embedded in non-metallic material) & V680S-D2KF67M (mounted on metallic surface: steel) V680-HS63 (mounted on non-metallic material) & V680S-D2KF67M (mounted on metallic surface: steel) V680-HS65 (mounted on metallic material) & V680S-D2KF67M (mounted on metallic surface: steel) V680-HS63 (with Metal on Back Surface) & V680S-DKF68 (Tag direction: Horizontal) V680-HS63 (with Metal on Back Surface) & V680S-DKF68 (Tag direction: Vertical) V680-HS65 (with Metal on Back Surface) & V680S-DKF68 (Tag direction: Horizontal) V680-HS65 (with Metal on Back Surface) & V680S-DKF68 (Tag direction: Vertical) Read Write 100 Y X Y 0–60–100 –40 –20 20 40 60 X–80 80 Read Write 100 150 200 Y Y X 0–150–250 –100 –50 50 100 150 X–200 200 Read Write 100 150 200 Y Y X 0–150–250 –100 –50 50 100 150 X–200 200 Read Write Y X Y 0–30–40 –20 –10 10 20 30 X Read Write 100 Y X Y 0–60–100 –40 –20 20 40 60 X–80 80 0–60–100 –40 –20 20 40 60 X–80 80 Read Write 㼅㼄 100 Y Y X 0–60–100 –40 –20 20 40 60 X–80 80 Read Write 100 Y Y X 0–60–100 –40 –20 20 40 60 X–80 80 Read Write 100 150 200 Y Y X Read Write 0–150–250 –100 –50 50 100 150 X–200 200 100 150 200 Y Y X Read Write 0–150–250 –100 –50 50 100 150 X–200 200

V680-H01-V2 (with Non-Metal on Back Surface) & V680S-DKF68 (Tag direction: Horizontal) V680-H01-V2 (with Non-Metal on Back Surface) & V680S-DKF68 (Tag direction: Vertical) V680-HS63 (with Metal on Back Surface) & V680S-DKF68 (Metal on back: Steel) (Tag direction: Horizontal) V680-HS63 (with Metal on Back Surface) & V680S-DKF68 (Metal on back: Steel) (Tag direction: Vertical) V680-HS65 (with Metal on Back Surface) & V680S-DKF68 (Metal on back: Steel) (Tag direction: Horizontal) V680-HS65 (with Metal on Back Surface) & V680S-DKF68 (Metal on back: Steel) (Tag direction: Vertical) V680-HS52 (embedded in non-metallic material) & V680-D2KF52M (embedded in non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D2KF52M (embedded in metallic surface: steel) V680-HS51 (embedded in metallic material) & V680-D2KF52M (embedded in non-metallic material) V680-HS51 (embedded in metallic material) & V680-D2KF52M (embedded in metallic surface: steel) –300 –200 –150 –100 –50 0 50 100 150 200 X 250–250 100 150 200 250 Y Y X Read Write 100 150 200 250 Y Y X –300 –200 –150 –100 –50 0 50 100 150 200 X 250–250 Read Write 100 Y Y X 0–60–100 –40 –20 20 40 60 X–80 80 Read Write 100 Y Y X 0–60–100 –40 –20 20 40 60 X–80 80 Read Write 100 150 200 Y –250 –200 –150 –100 –50 0 50 100 150 200 X Y X Read Write 100 150 200 Y Y X –250 –200 –150 –100 –50 0 50 100 150 200 X Read Write 0–30–40 –20 –10 10 20 30 X Y X Y Read Write 0–30–40 –20 –10 10 20 30 X Y Read Write X Y 0–30–40 –20 –10 10 20 30 X Y X Y Read Write 0–30–40 –20 –10 10 20 30 X Y Read Write X Y

2-kbyte Memory Bolt RF Tags 8-kbyte Memory RF Tag The values given for communications ranges are reference values. Refer to pages 21 to 22 for communications distance specifications. The communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS63 (mounted on non-metallic material) & V680-D2KF52M (embedded in non-metallic material) V680-HS52 (embedded in Non-Metal) & V680S-D2KF67 (mounted on non-metallic material) V680-HS51 (embedded in metallic material) & V680-D2KF52M-BT01 (mounted in metal/non-metallic material) V680-HS51 (embedded in metallic material) & V680-D2KF52M-BT11 (mounted in metal/non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D2KF52M-BT01 (mounted in metal/non-metallic material) V680-HS52 (embedded in non-metallic material) &V680S-D8KF67 V680-HS63 (mounted on non-metallic material) &V680S-D8KF67 0–30–40 –20 –10 10 20 30 X Y X Y Read Write Read Write 100 Y X Y 0–60–100 –40 –20 20 40 60 X–80 80 0–30–40 –20 –10 10 20 30 X Y X Y 0–30–40 –20 –10 10 20 30 X Y X Y 0–30–40 –20 –10 10 20 30 X Y X Y 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write

V680-HS65 (mounted on metallic material) &V680S-D8KF67 V680-H01-V2 (mounted on non-metallic material) &V680S-D8KF67 V680-HS52 (embedded in non-metallic material) & V680S-D8KF67M (mounted on metallic surface: steel) V680-HS63 (mounted on non-metallic material) & V680S-D8KF67M (mounted on metallic surface: steel) V680-HS65 (mounted in metal) & V680S-D8KF67M (mounted on metallic surface: steel) V680-HS63 (mounted on non-metallic material) & V680S-D8KF68 (Tag direction: Horizontal) V680-HS63 (mounted on non-metallic material) & V680S-D8KF68 (Tag direction: Vertical) V680-HS65 (mounted on metallic material) & V680S-D8KF68 (Tag direction: Horizontal) V680-HS65 (mounted on metallic material) & V680S-D8KF68 (Tag direction: Vertical) 100 150 200 Y -250 -200 -150 -100 -50 0 50 100 150 200 X Y X Read/Write 100 150 200 Y -250 -200 -150 -100 -50 0 50 100 150 200 X Y X Read/Write Y -40 -30 -20 -10 10 20 30 X0 Y X Read/Write 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write 100 150 200 Y -250 -200 -150 -100 -50 0 50 100 150 200 X Y X Read/Write 100 150 200 Y -250 -200 -150 -100 -50 0 50 100 150 200 X Y X Read/Write

V680-H01-V2 (mounted on non-metallic material) & V680S-D8KF68 (Tag direction: Horizontal) V680-H01-V2 (mounted on non-metallic material) & V680S-D8KF68 (Tag direction: Vertical) V680-HS63 (mounted on non-metallic material) & V680S-D8KF68M (Metal on back: Steel (Tag direction: Horizontal)) V680-HS63 (mounted on non-metallic material) & V680S-D8KF68M (Metal on back: Steel (Tag direction: Vertical)) V680-HS65 (mounted on metallic material) & V680S-D8KF68M (Metal on back: Steel (Tag direction: Horizontal)) V680-HS65 (mounted on metallic material) & V680S-D8KF68M (Metal on back: Steel (Tag direction: Vertical)) -300 -200 -150 -100 -50 0 50 100 150 200 X 250-250 100 150 200 250 Y Y X Read/Write -300 -200 -150 -100 -50 0 50 100 150 200 X 250-250 100 150 200 250 Y Y X Read/Write 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write 100 150 200 Y -250 -200 -150 -100 -50 0 50 100 150 200 X Y X Read/Write 100 150 200 Y -250 -200 -150 -100 -50 0 50 100 150 200 X Y X Read/Write

DeviceNet ID Slave (When Using the V680-HAM42-DRT) PROFIBUS ID Slave (When Using the V680-HAM42-PRT) ID Flag Sensors (When Using the V680-HAM91/-HAM81) 1-kbyte Memory RF Tag The values given for communications ranges are reference values. Refer to pages 24 to 25, 29 for communications distance specifications. For information on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on pages 2 to 3. The communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS52 (embedded in non-metallic material) & V680-D1KP52MT (embedded in non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP52MT (embedded in metallic surface: steel) V680-HS51 (embedded in metallic material) & V680-D1KP52MT (embedded in non-metallic material) V680-HS51 (embedded in metallic material) & V680-D1KP52MT (embedded in metallic surface: steel) V680-HS63 (mounted on non-metallic material) & V680-D1KP52MT (embedded in non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP66T (mounted on non-metallic material) V680-HS63 (mounted on non-metallic material) & V680-D1KP66T (mounted on non-metallic material) V680-HS65 (mounted on metallic material) & V680-D1KP66T (mounted on non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP66T-SP (embedded in non-metallic material) V680-HS63 (mounted on non-metallic material) & V680-D1KP66T-SP (mounted on non-metallic material) 0–30–40 –20 –10 10 20 30 X Y Read Write X Y 0–30–40 –20 –10 10 20 30 X Y Read Write X Y 0–30–40 –20 –10 10 20 30 X Y X Y Read Write 0–30–40 –20 –10 10 20 30 X Y Read Write X Y 0–30–40 –20 –10 10 20 30 X Y Read Write X Y Read Write 0–60–100 –40 –20 20 40 60 X–80 80 100 Y 0–60–100 –40 –20 20 40 60 X–80 80 100 Y Read Write X Y 0–60–100 –40 –20 20 40 60 X–80 80 100 Y Read Write 0–30–40 –20 –10 10 20 30 X Y Read Write X Y 0–60–100 –40 –20 20 40 60 X–80 80 100 Y X Y Read Write

1-kbyte Memory Bolt RF Tags 2-kbyte Memory RF Tag The values given for communications ranges are reference values. Refer to pages 26 to 27, 29 for communications distance specifications. For information on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on pages 2 to 3. The communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS65 (mounted on metallic material) & V680-D1KP66T-SP (mounted on non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP66MT (mounted on metallic surface: steel) V680-HS63 (mounted on non-metallic material) & V680-D1KP66MT (mounted on metallic surface: steel) V680-HS65 (mounted on metallic material) & V680-D1K66MT (mounted on metallic surface: steel) V680-HS51 (embedded in metallic material) & V680-D1KP52M-BT01 (mounted in metal/non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP52M-BT01 (mounted in metal/non-metallic material) V680-HS63 (mounted on non-metallic material) & V680S-D2KF67 (mounted on non-metallic material) V680-HS65 (mounted on metallic material) & V680S-D2KF67 (mounted on non-metallic material) V680-HS52 (embedded in non-metallic material) & V680S-D2KF67M (mounted on metallic surface: steel) V680-HS63 (mounted on non-metallic material) & V680S-D2KF67M (mounted on metallic surface: steel) 0–60–100 –40 –20 20 40 60 X–80 80 100 Y Read Write 0–30–40 –20 –10 10 20 30 X Y Read Write X Y Read Write 0–60–100 –40 –20 20 40 60 X–80 80 100 Y X Y 0–60–100 –40 –20 20 40 60 X–80 80 100 Y Read Write 0–30–40 –20 –10 10 20 30 X Y X Y 0–30–40 –20 –10 10 20 30 X Y X Y 0–60–100 –40 –20 20 40 60 X–80 80 Read Write 100 Y Y X Read Write 100 150 200 Y Y X –250 –200 –150 –100 –50 0 50 100 150 200 X 0–30–40 –20 –10 10 20 30 X Read Write Y Y X 0–60–100 –40 –20 20 40 60 X–80 80 Read Write 100 Y Y X

V680-HS65 (mounted on metallic material) & V680S-D2KF67M (mounted on metallic surface: steel) V680-HS63 (with Metal on Back Surface) & V680S-D2KF68 (Tag direction: Horizontal) V680-HS63 (with Metal on Back Surface) & V680S-D2KF68 (Tag direction: Vertical) V680-HS65 (with Metal on Back Surface) & V680S-D2KF68 (Tag direction: Horizontal) V680-HS65 (with Metal on Back Surface) & V680S-D2KF68 (Tag direction: Vertical) V680-HS63 (with Metal on Back Surface) & V680S-D2KF68M (Metal on back: Steel) (Tag direction: Horizontal) V680-HS63 (with Metal on Back Surface) & V680S-D2KF68M (Metal on back: Steel) (Tag direction: Vertical) V680-HS65 (with Metal on Back Surface) & V680S-D2KF68M (Metal on back: Steel) (Tag direction: Horizontal) V680-HS65 (with Metal on Back Surface) & V680S-D2KF68M (Metal on back: Steel) (Tag direction: Vertical) 0–60–100 –40 –20 20 40 60 X–80 80 Read Write 100 Y Y X 100 Y Y X 0–60–100 –40 –20 20 40 60 X–80 80 Read Write 100 Y Y X 0–60–100 –40 –20 20 40 60 X–80 80 Read Write 100 150 200 Y Y X –250 –200 –150 –100 –50 0 50 100 150 200 X Read Write 100 150 200 Y Y X –250 –200 –150 –100 –50 0 50 100 150 200 X Read Write 100 Y Y X 0–60–100 –40 –20 20 40 60 X–80 80 Read Write 100 Y Y X 0–60–100 –40 –20 20 40 60 X–80 80 Read Write 100 150 200 Y Y X –250 –200 –150 –100 –50 0 50 100 150 200 X Read Write 100 150 200 Y Y X –250 –200 –150 –100 –50 0 50 100 150 200 X Read Write

2-kbyte Memory Bolt RF Tags V680-HS52 (embedded in non-metallic material) & V680-D2KF52M (embedded in non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D2KF52M (embedded in metallic surface: steel) V680-HS51 (embedded in metallic material) & V680-D2KF52M (embedded in non-metallic material) V680-HS51 (embedded in metallic material) & V680-D2KF52M (embedded in metallic surface: steel) V680-HS63 (mounted on non-metallic material) & V680-D2KF52M (embedded in non-metallic material) V680-HS52 (embedded in non-metallic material) & V680S-D2KF67 (mounted on non-metallic material) V680-HS51 (embedded in metallic material) & V680-D2KF52M-BT01 (mounted in metal/non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D2KF52M-BT01 (mounted in metal/non-metallic material) 0–30–40 –20 –10 10 20 30 X Y X Y Read Write 0–30–40 –20 –10 10 20 30 X Y Read Write X Y 0–30–40 –20 –10 10 20 30 X Y X Y Read Write 0–30–40 –20 –10 10 20 30 X Y Read Write X Y 0–30–40 –20 –10 10 20 30 X Y Read Write X Y 0–60–100 –40 –20 20 40 60 X–80 80 Read Write 100 Y Y X 0–30–40 –20 –10 10 20 30 X Y X Y 0–30–40 –20 –10 10 20 30 X Y X Y

The values given for communications ranges are reference values. Refer to pages 28 to 29 for communications distance specifications. For information on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on pages 2 to 3. The communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS52 (embedded on non-metallic material) &V680S-D8KF67 V680-HS63 (mounted on non-metallic material) &V680S-D8KF67 V680-HS65 (mounted on metallic material) &V680S-D8KF67 V680-HS52 (embedded on non-metallic material) & V680S-D8KF67M (mounted on metallic surface: steel) V680-HS63 (mounted on non-metallic material) & V680S-D8KF67M (mounted on metallic surface: steel) V680-HS65 (mounted on metallic material) & V680S-D8KF67M (mounted on metallic surface: steel) 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write 100 150 200 Y -250 -200 -150 -100 -50 0 50 100 150 200 X Y X Read/Write Y -40 -30 -20 -10 10 20 30 X0 Y X Read/Write 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write

V680-HS63 (mounted on metallic surface: steel) & V680S-D8KF68 (Tag direction: Horizontal) V680-HS63 (mounted on metallic surface: steel) & V680S-D8KF68 (Tag direction: Vertical) V680-HS65 (mounted on metallic surface: steel) & V680S-D8KF68 (Tag direction: Horizontal) V680-HS65 (mounted on metallic surface: steel) & V680S-D8KF68 (Tag direction: Vertical) V680-HS63 (mounted on metallic surface: steel) & V680S-D8KF68M (Tag direction: Horizontal) V680-HS63 (mounted on metallic surface: steel) & V680S-D8KF68M (Tag direction: Vertical) V680-HS65 (mounted on metallic surface: steel) & V680S-D8KF68M (Tag direction: Horizontal) V680-HS65 (mounted on metallic surface: steel) & V680S-D8KF68M (Tag direction: Vertical) 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write 100 150 200 Y -250 -200 -150 -100 -50 0 50 100 150 200 X Y X Read/Write 100 150 200 Y -250 -200 -150 -100 -50 0 50 100 150 200 X Y X Read/Write 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write 100 Y -100 -80 -60 -40 -20 0 20 40 60 80 X Y X Read/Write 100 150 200 Y -250 -200 -150 -100 -50 0 50 100 150 200 X Y X Read/Write 100 150 200 Y -250 -200 -150 -100 -50 0 50 100 150 200 X Y X Read/Write

Communications Time between Antennas and Tags ID Controllers (V680-CA5D0@-V2, CJ1W-V680C11/C12, CS1W-V680C11/12) 1-kbyte Memory RF Tag V680-D1KP@ (used in combination with the V680-HS@@ Antenna, V680-HA63A Amplifier Unit and V680-H01-V2 Antenna) V680-D1KP58HTN (used in combination with the V680-H01-V2 Antenna) *1. The V680-H01 Antenna cannot be used in high-speed mode. *2. When using multi-access or FIFO communications options, normal-mode communications speed will be used regardless of the high-speed mode setting. 2-kbyte Memory RF Tag V680S-D2KF@@, V680S-D2KF52M/-D2KF52M-BT@@ (used in combination with the V680-HS@@ Antenna, V680-HA63B Amplifier Unit and V680-H01-V2 Antenna) * When using multi-access or FIFO communications options, normal-mode communications speed will be used regardless of the high-speed mode setting.8-kbyte Memory RF Tag V680S-D8KF@@ (used in combination with the V680-HS@@ Antenna and V680-HA63B Amplifier Unit) * When using V680S-D8KF@@ RF Tag, normal-mode communications speed will be used regardless of the high-speed mode setting. Communications speed setting Command Write verification setting Communications time N: No. of bytes processed Normal mode Read − T=1.3N+31 Write Enabled T=2.1N+58 Disabled T=1.8N+56 High-speed mode *1, *2 Read − T=1.0N+29 Write Enabled T=1.8N+51 Disabled T=1.5N+47 Communications speed setting Command Write verification setting Communications time N: No. of bytes processed Normal mode Read − T=1.2N+30 Write Enabled T=2.4N+49 Disabled T=1.2N+49 High-speed mode * Read − T=0.9N+27 Write Enabled T=1.7N+49 Disabled T=0.9N+41 Communications speed setting Command Communications time N: No. of bytes processed Normal mode Read T=0.6N+47 Write (verify enabled) T=1.2N+128 Write (verify disabled) T=0.6N+101 High-speed mode * Read T=0.6N+47 Write (verify enabled) T=1.2N+128 Write (verify disabled) T=0.6N+101 2,500 2,000 1,500 1,000 500 0 200 400 600 800 1,000 1,200 Bytes Read Write (verify enabled) Write (verify disabled) /circle6Communications speed: Normal mode 2,000 1,600 1,200 800 400 1,800 1,400 1,000 600 200 0 200 400 600 800 1,000 1,200 Bytes Read Write (verify enabled) /circle6Communications speed: High-speed mode Write (verify disabled) Communications speed (ms) Communications speed (ms) 5,000 4,000 3,000 2,000 1,000 4,500 3,500 2,500 1,500 500 4,000 3,000 2,000 1,000 3,500 2,500 1,500 500 0 500 1,000 1,500 2,000 2,500 Bytes Read Write (verify enabled) Write (verify disabled) Read Write (verify enabled) Write (verify disabled) 500 1,000 1,500 2,000 2,500 /circle6Communications speed: Normal mode Bytes /circle6Communications speed: High-speed mode Communications speed (ms) Communications speed (ms) 2,500 1,500 3,000 2,000 1,000 500 0 500 1,000 1,500 2,000 2,500 Bytes Read Write (verify enabled) Write (verify disabled) Read Write (verify enabled) Write (verify disabled) 500 1,000 1,500 2,000 2,500 /circle6Communications speed: Normal mode Bytes /circle6Communications speed: High-speed mode 2,500 1,500 3,000 2,000 1,000 500 Communications speed (ms) Communications speed (ms)

Communications Time (Communications Time between Antenna and RF Tag + Processing Time at Amplifier Unit) DeviceNet ID Slave (V680-HAM42-DRT) PROFIBUS ID Slave (V680-HAM42-PRT) 1-kbyte Memory RF Tags V680-D1KP@@ (V680-HS@@ Antenna) 2-kbyte Memory RF Tags V680S-D2KF@, V680S-D2KF52M/-D2KF52M-BT@@ (V680-HS@@ Antenna) 8-kbyte Memory RF Tags V680S-D8KF@@ (V680-HS@@ Antenna) *1. The V680-HAM42-PRT does not support V600-compatible mode. *2. When using V680S-D8KF@@ RF Tag, normal-mode communications speed will be used regardless of the high-speed mode setting. Communications time setting Command Communications time (ms) 4-byte Access Mode 26-byte Access Mode 58-byte Access Mode V600-compatible mode * Normal Read 67 95 137 67 Write with Verification 105 143 210 105 Data Fill V680-HAM42-DRT: 17.5 × No. of processed blocks + 89.2 V680-HAM42-PRT: 20.6 × No. of processed blocks + 76.8 − High speed Read 63 85 117 − Write with Verification 89 128 186 − Data Fill V680-HAM42-DRT: 14.8 × No. of processed blocks + 71.7 V680-HAM42-PRT: 18.8 × No. of processed blocks + 66.4 − Communications time setting Command Communications time (ms) 4-byte Access Mode 26-byte Access Mode 58-byte Access Mode V600-compatible mode * Normal Read 65 92 130 65 Write with Verification 105 142 219 105 Data Fill V680-HAM42-DRT: 17.5 × No. of processed blocks + 89.2 V680-HAM42-PRT: 21.2 × No. of processed blocks + 86.4 − High speed Read 61 81 110 − Write with Verification 86 124 178 − Data Fill V680-HAM42-DRT: 14.8 × No. of processed blocks + 71.7 V680-HAM42-PRT: 17.2 × No. of processed blocks + 74.6 − Communications time setting Command Communications time (ms) 4-byte Access Mode 26-byte Access Mode 58-byte Access Mode V600-compatible mode *1 Normal Read 42 42 60 42 Write with Verification 133 133 170 133 Data Fill V680-HAM42-DRT: 9.1 × No. of processed blocks + 105.5 V680-HAM42-PRT: 9.1 × No. of processed blocks + 105.5 − High speed *2 Read 42 42 60 42 Write with Verification 133 133 170 133 Data Fill V680-HAM42-DRT: 9.1 × No. of processed blocks + 105.5 V680-HAM42-PRT: 9.1 × No. of processed blocks + 105.5 −

ID Flag Sensors (V680-HAM91/-HAM81) Calculation Example Read Processing Using Combination of V680-D1KP66T and V680-HS63 Note: 1. The travel speed depends on factors such as the communications distance Y and axis offset. Therefore, it is recommended to refer to the interrogation zone figure and to perform operation using the widest part of the area. 2. The calculated value is a rough guide. Perform testing with the actual devices before actual operation. 3. This calculation formula does not include communications error processing. Operating Mode Communications time (ms) Read Write RF Tag Data Read, Verification read Write, Bit Set, Bit Clear 1-kbyte/2-kbyte Memory RF Tag 43 87 8-kbyte Memory RF Tags 50 84 Travel direction RF Tag travel speed (conveyor speed) = Travel distance (D) in interrogation zone Communications time (T) Interrogation zone RF Tag travel speed (m/min) = 43(ms) 50(mm) -60 -40 -20 0 20 40 X Y 50 mm (Unit: mm) 69(m/min)

TAT When Using an ID Controller (Reference Values) TAT (Turn Around Time) TAT refers to the total time required from the point at which a host device (such as a personal computer) starts sending a command until a response is received. Command send time: This is the time required for sending a command from the host device to the Controller. It varies depending on the communications speed and format. RF Tag communication time: This is the time required for communication between the Antenna and the RF Tag. Response receipt time: This is the time required for returning a response from the Controller to the host device. It varies depending on the communications speed and format.

For an ordinary command
Expansion Read Command
Expansion Write Command TAT = Command send time + RF Tag communication time + response RDA1 CR RD001234 CR TAT RF Tag communication time(Command) Response XRA1 CR CR CR CR CR ID Controller Host TAT (Command) Command send time Communications time with Tag Frame 1 (Response 1) Frame 2 (Response 2) Frame n-1 (Response n-1) Frame n (Response n) (Delimiter) (Delimiter) (Delimiter) (Delimiter) Response reception time XWA1 CR CR CR CR CR CR XW00 CRID Controller TAT (Command) (Response 1) (Response 2) (Response n-1) Host Command send time Communications time with Tag (Response n) Response reception time

This product is not designed or rated for ensuring safety of persons. Do not use it for such purposes. * This catalog is intended only to help select the appropriate product. Be sure to read the User's Manual for usage precautions prior to using the product. To ensure safety, be sure to follow the following precautions: 1. Do not operate this product in any flammable, explosive, or corrosive gas environment. 2. Do not disassemble, repair, or remodel this product. 3. Tighten the base lock screws and terminal block screws completely. Be sure to use wiring crimp terminals of the specified size. 5. If any cable has a locking mechanism , be sure to check that it has been locked before using it. 6. The DC power supply must be within the specified rating (24 VDC +10%/−15%). 7. Do not reverse the power supply connection. 8. Do not insert water, wire, etc., into any of the gaps in the case. Doing so may cause fire or electric shock. 9. Turn OFF the Controller or ID Sensor Unit power before attaching or removing the Antenna. 10. If multiple Antennas are mounted near each other, communications performance may decrease due to mutual interference. Refer to the manual for the Antennas and RF Tags and check to make sure there is no mutual interference before installation. 11. To remove the ID Controller, catch a tool on the mounting hook and gently remove the Unit. 12. Wire correctly and do not short-circuit the load. The ID Controller may rupture or burn. 13. Do not use in environments that are subject to oil. 14. Never use an AC power supply. 15. In the event that the product exhibits any abnormal condition, immediately stop using the system, turn OFF the power, and contact your OMRON sales representative. 16. Dispose of this product as industrial waste. 17. Be sure to follow any other warnings, cautions, and notices given in this document. Please observe the following precautions to prevent failure to operate, malfunctions, or undesirable effects on product performance. Installation Site Install the product at a location where:

It is not exposed to corrosive gases, dust, metal chips, or salt.
The ambient operating temperature is within the range stipulated in the specifications.
There are no sudden variations in temperature (no condensation).
The ambient operating humidity is within the range stipulated in the specifications.
No vibration or shock exceeding the values stipulated in the specifications is transmitted directly to the body of the product.
It is not subject to splashing water, oil, or chemical substances. Installation
The product uses the 13.56-MHz frequency band to communicate with RF Tags. Some devices, such as some motors, inverters, and switching power supplies, generate electromagnetic waves (i.e., noise) that can affect communications with RF Tags. If any of these devices are nearby, communications with RF Tags may be affected or RF Tags may be destroyed. If the product is to be used near such devices, check the effects on communications before using the product.
To minimize the general influence of noise, observe the following precautions: 1. Ground any metallic material located around this device to 100Ω or less. 2. Keep the product away from high voltage and heavy current.
Do not pull on the cable.
Do not use products that are not waterproof in misty environments.
Do not subject the products to chemicals that adversely affect product materials.
When installing the product, tighten screws to the following torque: Controller: 1.2 N·m max ID Sensor Unit: 0.4 N·m V680-HS51 Antenna: 6 N·m V680-HS52 Antenna: 40 N·m V680-HS63 Antenna: 1.2 N·m V680-HS65 Antenna: 1.2 N·m V680-H01-V2 Antenna: 1.2 N·m (Attach the enclosed Mounting Brackets) V680-D1KP66T/-D1KP66MT: 0.5 N ·m V680-D1KP66T-SP: 1.2 N·m V680-D1KP54T: 0.3 to 0.5 N·m V680S-D2KF67/-D2KF67M: 0.6N ·m V680S-D2KF68/-D2KF68M: 1.2N ·m V680S-D8KF67/-D8KF67M: 0.6N ·m V680S-D8KF68/-D8KF68M: 1.2N ·m
Do not pull the Antenna connector over the power of 30 N. The Antenna connector may be broken.
Transmission will not be possible if the front and back panels are mistakenly reversed and the Unit is mounted to a metallic surface. V680S-D2KF67M V680S-D2KF68M
The transmission distance will be reduced when the Unit is not mounted to a metallic surface. V680S-D2KF67M V680S-D2KF68M V680S-D8KF67M V680S-D8KF68M
If multiple Antennas are mounted near each other, communications performance may decrease due to mutual interference. Refer to the User's Manual (Cat. No. Z248) and check to make sure there is no mutual interference.
Depending on the operating environment, the case surface may become fogged, but basic performance will not be affected.
When Antenna (only V680-H01-V2) is used in the United States and Canada, the ferrite core (ZCAT3035-1330) of the antenna's attachment is installed on controller's (V680-CA5D01-V@) DC power cable.
The communications range is adversely affected if there is any metal material around the RF Tag.
The maximum communications range can be obtained when the Antenna faces the RF tag directly. When the RF tag is installed at a tilt, the communications range is reduced. Consider the effect of the RF tag at tilt when installing the RF Tag.
Provide the mounting distances between plural RF tags to prevent them from malfunctions due to mutual interference.
If the central axis of an antenna and RF tag shifts, a communications range will fall. WARNING Precautions for Safe Use Precautions for Correct Use

Communications with Host (V680-HAM91/-HAM81) The I/O status may be unstable when the ID Controller is started. After turning ON the power supply to the ID Controller, allow at least 1 second to elapse before performing control. Storage Store the product at a location where:

It is not exposed to corrosive gases, dust, metal chips, or salt.
The ambient storage temperature is within the range stipulated in the specifications.
There are no sudden variations in temperature (no condensation).
The ambient storage humidity is within the range stipulated in the specifications.
No vibration or shock exceeding the values stipulated in the specifications is transmitted directly to the body of the product.
It is not subject to splashing water, oil, or chemical substances. Cleaning Thinners, benzine, acetone, and kerosine may have adverse effects on resin parts and the case coating. Check the resistance to chemicals in the user’s manual and do not use chemicals that may affect the product.

(Unit: mm) Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. R0.28 5 0 –0.1 –0.1 dia. V680-D1KP52MT/-D2KF52M Case material PPS resin Filling Epoxy resin V680-D1KP53M Case material PPS resin Filling Epoxy resin C0.510 dia. 6-R0.8 4.5 2.7±0.1 1.1 16 dia. 20 dia. V680-D1KP54T Case material PPS resin 4-R4 3234 25±0.2 25±0.2 25±0.2 25±0.2 4-R2.7 Two, 6 dia. 3.5±0.1 Two, 3.5 dia. Two, M3 Mounting Hole Dimensions V680-D1KP66T/-D1KP66MT Case material PPS resin Two, 5.5 dia. 4-R6 1.3 6.5 2.5 max. (mounting holes) Two, M5 80 ±0.2 80 ±0.2 3436.5 Mounting Hole Dimensions V680-D1KP66T-SP Case material PFA resin 32±0.2 32±0.232±0.2 32±0.2 Two, 3.5-dia. (mounting holes) Two, M3 Mounting Hole Dimensions Mounting height 5+1.0 V680S-D2KF67/-D2KF67M V680S-D8KF67/-D8KF67M Case material PPS resin Mounting Hole Dimensions 44±0.2 76±0.2 76±0.2 44±0.2 Two, M4 Two, 4.5-dia. (mounting holes) Mounting height 10+1.0 V680S-D2KF68/-D2KF68M V680S-D8KF68/-D8KF68M Case material PPS resin

Antenna with Detachable Amplifier Unit V680-D1KP58HTN 60 dia. 80 dia. 14 dia. 1.25 7.510±0.2 (5°) (5°) 18 dia. 2-R1 Coating PPS resin M10-P1.5 C1.5 8.4 dia. (19.6) 17 100.1 21.6 9.5 15-30°V680-D1KP52M-BT01 V680-D2KF52M-BT01 M8-P1.25 C1.5 6 dia. (15) 13 100.1 19.1 15-30°V680-D1KP52M-BT11 V680-D2KF52M-BT11 30 50 37 Insulated cover 5.5-dia. coaxial cable Ferrite core Connector 16.8 dia.16.5 dia. 47.6 35 dia. 22.5 dia. Two toothed washers Two mounting nuts Operation indicator M22×1 14.5 dia.19.8 dia. Mounting Hole Dimensions L V680-HS52-W Cable length L dimension 2 m 2,000 +100 −50 12.5 m 12,500 +200 −50 Case material Brass Communication surface ABS resin Filling Epoxy resin Cable PVC 30 50 Insulated cover 5.3-dia. coaxial cable Ferrite core 16.8 dia.16.5 dia. 47.6 19.8 dia. Two toothed washers Two mounting nuts Operation indicator 20 Connector 14.5 dia. M22×1 35 dia. 22.5 dia. Mounting Hole Dimensions L V680-HS52-R Cable length L dimension 2 m 2,000 +100 −50 12.5 m 12,500 +200 −50 Case material Brass Communication surface ABS resin Filling Epoxy resin Cable PVC V680-HS51 Case material Brass Communication surface ABS resin Filling Epoxy resin Cable PVC 2,000 +200 -50 12.5 dia. 21 dia. M12×1 Toothed washer Two mounting nuts 12.8 25 50 Ferrite core 26.2 Connector Insulated cover Coaxial cable, 2.9 dia., Standard length: 2 m Mounting Hole Dimensions 9.6 dia. (14.5 dia.) (16.8 dia.)

Two, M4 or 4.5 dia. Operation indicator 5.5-dia. coaxial cable Ferrite core Connector 30 50 37 Insulated cover 28±0.1 27 6 14.5 dia. 16.5 dia. 16.8 dia. Mounting Hole Dimensions L ±0.2 V680-HS63-W Cable length L dimension 2 m 2,000 +100 −50 12.5 m 12,500 +200 −50 Case material ABS resin Filling Epoxy resin Cable PVC Operation indicator 28±0.1 27 6 5.3-dia. coaxial cable Ferrite core Connector Center of coil Two, M4 or 4.5 dia. 30 50 20 Insulated cover 16.8 dia. 14.5 dia. 16.5 dia. Mounting Hole Dimensions ±0.2 L Cable length L dimension 2 m 2,000 +100 −50 12.5 m 12,500 +200 −50 Case material ABS resin Filling Epoxy resin Cable PVC V680-HS63-R Operation indicator 90±0.2 100 2030 100 90±0.2 5030 5.5-dia. coaxial cable 16.5 dia. Ferrite core Bushing Four, 4.5-dia. (Mounting holes) Insulated cover Connector 16.8 dia.14.5 dia. LV680-HS65-W Cable length L dimension 2 m 2,000 +100 −50 12.5 m 12,500 +200 −50 Case material ABS resin Filling Epoxy resin Cable PVC (gray) 100 90±0.2 90±0.2 100 Bushing Four, 4.5-dia. (Mounting holes) 1120 5030 5.3-dia. coaxial cable Insulated cover 16.5 dia. Ferrite core (39.5) Connector 14.5 dia. 16.8 dia. L Operation indicator Cable length L dimension 2 m 2,000 +100 −50 12.5 m 12,500 +200 −50 Case material ABS resin Filling Epoxy resin Cable PVC (black) V680-HS65-R

Antenna with Built-in Amplifier Unit Amplifier Unit 7.5 (45) (17) 20 dia. Four, 5-dia. (Mounting holes) Ferrite core Connector 5.8-dia. vinyl-insulated round cable 12 operation indicators (LEDs) Communication surface 30 38 Coil core 185±0.2 Four, M4 or 4.5 dia. (25 dia.) Setting switch cover 13.5 (1) 4 mounting brackets (enclosed) Mounting Hole Dimensions Communication surface 142.5 235±0.2 250 142.5 235 500 0 +50 64.8 200 185 V680-H01-V2 Case material PC/ASA resin Filling Aluminum Cable PVC 13.7 65 18 15 dia. 9.5 dia. 3.5 12.8 dia. 15 35.625 5.8-dia. vinyl-insulated round cable (2 conductors: 41/0.16 dia., 8 conductors: 17/0.08 dia.) Connector Connector Operation indicator L V680-HA63A/-HA63B Cable length L dimension 0.5 m 500 +100 −50 5 m 5,000 +100 −50 10 m 10,000 +200 −100 Case material PC resin Filling Epoxy resin Cable PVC

Amplifier-integrated Controller (DeviceNet ID Slave/PROFIBUS ID Slave) Two, M4 80±0.2 17.5 95±0.2 7.5 (80) 5Two, 4.5-dia. (Mounting holes) 105 Mounting Hole Dimensions Switch cover Monitor display Antenna connector V680-CA5D01-V2/-CA5D02-V2 CJ1W-V680C11 4.5 4.7 Six operation indicators Switches Connector 2.7 2.7 18.1 17.3 Connector Switches Six operation indicators 123 101 130 CS1W-V680C11 4.5 4.7 Eight operation indicators Switches Connectors 2.7 18.1 17.3 2.7 31 29.2 CJ1W-V680C12 CS1W-V680C12 Connectors Terminals Switches Eight operation indicators 123 10115 With cover mounted: 16.5 130 3.6 8 Data indicators 5 5 23. 2 2 6 . ) . 3 (2 1 20 10 5 5 164 1.5 65 Mode switch Antenna connector 12 6 18 DeviceNet connector Power supply connector5.06 21.5 20.5 5 3 184. 28.5 Operation indicators Node address switches V680-HAM42-DRT Case material PC+ABS resin Data indicators 5 5 23. 2 2 6 . ) . 3 (2 1 20 10 5 5 164 1.5 65 Mode switch Antenna connector 12 6 18 Power supply connector5.1 21.5 18.25 28.5 32.5 Operation indicators Node address switches PROFIBUS connector V680-HAM42-PRT Case material PC+ABS resin

Amplifier-integrated Controllers (ID Flag Sensors) Handheld Reader Writer 7 . 8 74.8 71.8 65.75 61.75 4 switches 21 operation indicators 7 . 4 1 = 1 . 2 7 × 4 switches18.95 30.25 41.55 52.85 0 3 (5.5) 108.26 90Connector 5 6 Connector 4 7 . 4 1 38.5 V680-HAM91/-HAM81 Case material PC+ABS resin Dimension L 1900 800 60 Activate switch 25.5 3.8-dia. vinyl-insulated round cable Standard length: 0.8 or 1.9 m L160.5 10.5 Antenna Ferrite core Operation indicator V680-CHUD Case material ABS resin Cable PVC Activate switch Reset button 25.523 4865 10.5 Antenna Ferrite core 3.8-dia. vinyl-insulated round cable Standard length: 2.5 m Connector Connector 1.8-dia. × 2 vinyl-insulated flat cable Standard length: 0.19 m 13 dia. 2500±60 24.99 32.2 190 ±20 160.5 44.9 Operation indicator V680-CH1D Case material ABS resin Cable PVC Operation indicator Activate switch Antenna Reset button 4865 23 25.5 10.5 Ferrite core 3.8-dia. vinyl-insulated round cable Standard length: 2.5 m Connector 160.5 44.9800 +50 -110 32.224.99 V680-CH1D-PSI Case material ABS resin Cable PVC

Interface Cables (Sold Separately) AC Adapter 14.4 1 6.1 Connector: XG5M-2632-N 20±5 20±520±5 20±5 6 . 7 3 35±5L 0 +50320 9-dia. round insulated vinyl cable, 23 conductors (7/0.2 dia.: AWG24) V680-A60 2M/5M/10M Note: The connectors are not waterproof. Cable length L dimension 2 m 2,000 5 m 5,000 10 m 10,000 V600-A22 4.1 dia. 9.5 ± 0.3 unifibe.com 1800 ± 100 45.5 23.5

25±0.2 25±0.2 25±0.2 25±0.2 1534 37 16 103.5 Two, 4-dia.4-R5.5 Two, M3 Mounting Hole Dimensions V680-D1KP66T Attachments V600-A86 Case material PPS resin Two, M4 Mounting Hole Dimensions 44±0.2 Two, 4.5-dia. mounting holes 76±0.2 Case material PBT resin Filling Epoxy resin V680-D8KF68/-D32KF68 Attachments V680-A81 M12M12 110 20 dia. 11.5 3.2 dia. 12 dia. Mounting Hole Dimensions V680-D1KP58HTN Attachments V680-A80 Material Stainless steel 5 8 Two, 6-dia Two, 3.5-dia 1.5 3.5 31±0.1 Two, M3 Mounting Hole Dimensions 31±0.2 V680-D1KP54T Attachments V700-A80 Material PPS resin 51L49 Connector to Amplifier Unit Connection label Connector to ID Controller 6 dia. 15 dia.15.5 dia. 6-dia. vinyl-insulated round cable Amplifier Unit Special Extension Cable V700-A40 2M V700-A41 3M V700-A42 5M V700-A43 10M V700-A44 20M V700-A45 30M Material PVC Cable length L dimension 2 m 2,000±100 3 m 3,000±100 5 m 5,000±100 10 m 10,000±100 20 m 20,000±100 30 m 30,000±100 20 dia. 15 dia.

41.8 L4 9

6-dia. vinyl-insulated round cable Connector to R/W Head Connector to ID Controller Connection label V680-H01 Special Cables V700-A40-W 2M V700-A40-W 5M V700-A40-W 10M V700-A40-W 20M V700-A40-W 30M Material PVC Cable length L dimension 2 m 2,000±100 5 m 5,000±100 10 m 10,000±100 20 m 20,000±100 30 m 30,000±100

Man.No. Japanese Man.No. Model Name Z248 SCHI-707 V680-HA63B/HS5@/HS6@/H01-V2/D2KF@@(M)(-BT@1), V680S-D2KF@@(M)/D8KF@@(M) V680 series Amplifiers/Antennas/RF Tags (FRAM) User's Manual Z249 SCHI-708 V680-CA5D01-V2/CA5D02-V2 V680 series ID Controller User's Manual Z262 SCHI-709 V680-HA63A/HS5@/HS@/H01-V2/D1KP@@M(T)(-BT@1)/ D1KP@@T(-SP)/D1KP58HT V680 series Amplifiers/Antennas/RF Tags (EEPROM) User's Manual Z271 SCHI-711 CS1W-V680C11/-V680C12, CJ1W-V680C11/-V680C12 CJ/CS series ID Sensor Units User's Manual Z278 SCHI-714 V680-HAM42-DRT V680 series DeviceNet ID Slave User's Manual Z279 SCHI-715 V680-HAM91/HAM81 V680 series ID Flag Sensors User's Manual Z272 SCHI-712 V680-CHUD/CH1D/CH1D-PSI V680 series Hand-held Reader Writer User's Manual Z268 SCHI-710 V680-HAM42-FRT V680 series FL Remote ID User's Manual Z320 SDGR-704 V680-HAM42-PRT/HS63-W/HS65-W/D1KP66(M)T/ D1KP58HTN, V680S-D2KF@@(M)/D8KF@@(M) V680 series PROFIBUS ID Slave User's Manual Z317 SDGR-703 CJ1W-V680C11/-V680C12 CJ series ID Sensor Units Operation Manual (NJ-series) Z339 SDGR-709 V680S-HMD64-ETN/HMD66-ETN V680S series User's Manual

Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2017.6 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2017 All Right Reserved.

Summary

RFID Systems with ISO/IEC 18000-3(15693) Compliance

Description