V4L

V4L SAIA-BURGESS | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

Burgess switches www.burgess-switch.comburgess-switch@johnsonelectric.om Subminiature V4L V4L Characteristics ■ long overtravel of 2.2 mm minimum ■ sealed to (IP6K7) option ■ pre-wired option ■ solder terminals ■ compliant to glow wire test IEC 60335-1, 4. ed. as optional item Rating 250 VAC, 5 A Di mensions (mm) 20 • 11 • 6.4 Actuator ■ plunger ■ plain lever ■ ice break lever Approvals ENEC, UL, CSA Preferr ed Range Ordering Actuating Force Sealing Operating pos. Terminal Circuit Actuator Contacts Electrical rating Re ference (N) (ozf) (mm) V4LS 2,5 9,0 IP6K7 11,7 ± 0,4 Cable 500 mm CO Plunger Ag 250 VAC, 5 A LSA2 2,0 IP6K7 16,5 ± 1,0 Cable 500 mm CO Plain lever Ag 250 VAC, 5 A LST7 2,5 9,0 IP6K7 11,7 ± 0,4 Solder CO Plunger Ag 250 VAC, 5 A LST7A2 2,0 IP6K7 14,6 ± 1,0 Solder CO Plain lever Ag 250 VAC, 5 A

36 Burgess switches www.burgess-switch.com burgess-switch@johnsonelectric.om Subminiature V4L Specifications Housing Glass fibre r einforced polyamide (PA 6.6) Plunger Polyacetal (POM) Mechanism Snap-action coil spring mechanism with stainless steel spring. Change-over, normally closed or normally open Contact carrier Brass. Moving contact beryllium-copper Contacts Fine silver or gold crosspoint Terminals V4L – solder tags V4LS – PVC covered leads 0.5 m long Temperatur e range ºC –40°C to +85°C Mechanical life V4L 2 T 106 cycles/min., V4LS 2 T 105 cycles/min. (impact free actuation) Protection V4L series IP40, V4LS series IP6K7, with encapsulated terminals Mounting Side mounting to a flat surface Actuators Plain lever, ice br eak lever, stainless steelPlain lever, ice break lever, stainless steel Cowl Silicon elastomer Circuit diagram Dimensions COMMON (black) NORMALLY CLOSED (grey) NORMALLY OPEN (blue) Recommended maximum electrical ratings Voltage Resistive load Motor load Approval (max) (A) (A) V4LST7 250 VAC 5 (0,75 pf) UL 1054/CSA 22,2 No. 55– 6,000 operations – 65°C

250 VAC 5 2 EN61058-1, T55, 50,000 operations

0–15 VDC 5 3 General rating – 50,000 operations (85°C) 15–30 VAC 5 3 General rating – 50,000 operations (85°C) V4LS 250 VAC 5 (0,75 pf) UL 1054/CSA 22,2 No. 55– 6,000 operations – 65°C 0–15 VDC 3 3 General rating – 50,000 operations (85°C) 15–30 VAC 3 3 General rating – 50,000 operations (85°C) NC grey COM black NO blue

Burgess switches www.burgess-switch.comburgess-switch@johnsonelectric.om Subminiature V4L Ordering Refer ence Actuating Release Free Operating Movement Total overtravel Overtravel Actuator Reference Force Force Position Position Differ ential Position Maximum Minimum Maximum Maximum Minimum Minimum (N) (ozf) (N) (ozf) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) Plunger V4LT7 2,4 8,60 0,4 1,44 12,9 0,507 11,7 ± 0.4 0,46 ± 0.012 0,9 0,023 9,2 0,36 2,2 0, 09 V4LST7 2,5 9,00 0,5 1,78 12,9 0,507 11,7 ± 0.4 0,46 ± 0.012 0,9 0,023 9,2 0,36 2,2 0, A1 Lever V4L… 2,4 8,60 0,4 1,44 14,5 0,57 12,6 ± 0,8 0,59 ± 0.03 1,0 0,04 9,6 0,38 2,2 0, 09 V4LS… 2,5 9,00 0,5 1,78 14,5 0,57 12,6 ± 0,8 0,59 ± 0.03 1,0 0,04 9,6 0,38 2,2 0, Width of lever 4.0 mm/0.16 in A2 Lever V4L… 1,5 5,70 0,3 1,08 16,5 0,65 13,5 ± 1.0 0,53 ± 0.04 1,3 0,05 9,6 0,38 2,9 1,1 V4LS… 2 7,20 0,3 1,08 16,5 0,65 13,5 ± 1.0 0,53 ± 0.04 1,3 0,05 9,6 0,38 2,9 1,1 Width of lever 4.0 mm/0.16 in F Le ver V4L… For positions and forces of this actuator please contact Bur gess V4LS… Width of lever 4.0 mm/0.16 in

38 Burgess switches www.burgess-switch.com burgess-switch@johnsonelectric.om Subminiature V4L Basic type V4L Type of sealing No symbol, unsealed S Sealed IP6K7 Terminals No symbol, pre-wir ed 500 mm with cable FLRY 0.5 mm2 and cable box (V4LS only) T7 Solder 2.95 T 0.5 T 3.55 long Circuit No symbol, change over Actuators No symbol, without lever A1 Plain lever 20.0 mm, fitted at the end opposite to plunger A2 Plain lever 30.0 mm, fitted at the end opposite to plunger F Special lever F type 20.0 mm, fitted at the end opposite to plunger Contact Material No symbol, Ag X Gold alloy on silver palladium crosspoint (AUX) Other contact materials on special request Approvals No symbol, without approval UL UL and CSA approval EN ENEC approval only UN UL, CSA and ENEC approval Special Features /□□□□ Burgess specialise in customer specific solutions. Additional product variants ar e available or can be provided. If your requir ements cannot be satisfied from the options listed, please contact us. Ordering Reference Example: V4L S T7 A1 X UL