V3P6L VISHAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
www.vishay.com Vishay General Semiconductor Revision: 14-Jun-2019 1 Document Number: 87460 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Surface-Mount TMBS® (Trench MOS Barrier Schottky) Rectifier DESIGN SUPPORT TOOLS AVAILABLE
FEATURES
- Low profile package
- Trench MOS Schottky technology
- Low power losses, high efficiency
- Low forward voltage drop
- Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C
- AEC-Q101 qualified available - Automotive ordering code; base P/NHM3
- Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in low voltage, high frequency inverters, freewheeling, DC/DC converte rs, and polarity protection applications. MECHANICAL DATA Case: SMP (DO-220AA) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 2 whisker test, HM3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes the cathode end Notes (1) Mounted on 10 mm x 10 mm PCB pad area (2) Free air, mounted on recommended copper pad area (3) The heat generated must be less than the thermal conductivity from junction-to-ambient: dPD/dTJ < 1/RJA PRIMARY CHARACTERISTICS IF(AV) 3.0 A VRRM 60 V IFSM 80 A VF at IF = 3.0 A 0.44 V TJ max. 150 °C Package SMP (DO-220AA) Circuit configuration Single SMP (DO-220AA) eSMP ® Series Cathode Anode 33DD3 D 3D Models Available MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL V3P6L UNIT Device marking code 36L Maximum repetitive peak reverse voltage V RRM 60 V Maximum DC forward current IF(AV) (1) 3A IF(AV) (2) 2.3 A Peak forward surge current 10 ms single half sine-wave superimposed on rated load IFSM 80 A Operating junction and storage temperature range T J (3) -40 to +150 °C Operating junction and storage temperature range T STG -55 to +150 °C
www.vishay.com Vishay General Semiconductor Revision: 14-Jun-2019 2 Document Number: 87460 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: pulse width 5 ms Notes (1) Free air, mounted on recommended PCB, 1 oz. pad area; thermal resistance RJA - junction-to-ambient (2) Mounted on 10 mm x 10 mm copper pad area PCB; thermal resistance RJM - junction-to-mount Note (1) AEC-Q101 qualified ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL TYP. MAX. UNIT Instantaneous forward voltage I F = 1.5 A TA = 25 °C VF (1) 0.45 - V IF = 3 A 0.51 0.59 IF = 1.5 A TA = 125 °C 0.35 - IF = 3 A 0.44 0.52 Reverse current V R = 60 V TA = 25 °C IR (2) -0 . 9 mA TA = 125 °C 4.0 20.0 Typical junction capacitance 4.0 V, 1 MHz C J 450 - pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise specified) PARAMETER SYMBOL V3P6L UNIT Typical thermal resistance RJA (1) 125 °C/W RJM (2) 15 ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE V3P6L-M3/H 0.024 H 3000 7" diamet er plastic tape and reel V3P6L-M3/I 0.024 I 10 000 13" diameter plastic tape and reel V3P6LHM3/H (1) 0.024 H 3000 7" diameter plastic tape and reel V3P6LHM3/I (1) 0.024 I 10 000 13" diameter plastic tape and reel
www.vishay.com Vishay General Semiconductor Revision: 14-Jun-2019 3 Document Number: 87460 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Forward Power Loss Characteristics Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Reverse Characteristics Fig. 5 - Typical Junction Capacitance Fig. 6 - Typical Transient Thermal Impedance 100 1000 10000 0.5 1.5 2.5 3.5 02 5 5 0 7 5 1 0 0 1 2 5 1 5 0 Axis Title 1st line 2nd line 2nd line Average Forward Rectified Current (A) Mount Temperature (°C) TM measured at cathode terminal mount typical values RthJM = 15 °C/W RthJA = 125 °C/W 100 1000 10000 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Axis Title 1st line 2nd line 2nd line Average Power Loss (W) Average Forward Current (A) D = 0.1 D = 0.2 D = 0.3 D = 1.0 D = tp/T T tp D = 0.8 D = 0.5 100 1000 10000 0.1 0 0.2 0.4 0.6 0.8 Axis Title 2nd line Instantaneous Forward Current (A) Instantaneous Forward Voltage (V) TJ = 100 °CTJ = 125 °C TJ = 150 °C TJ = -40 °C TJ = 25 °C 100 1000 10000 0.00001 0.0001 0.001 0.01 0.1 100 20 40 60 80 100 Axis Title 1st line 2nd line 2nd line Instantaneous Reverse Current (mA) Percent of Rated Peak Reverse Voltage (%) TJ = 150 °CTJ = 125 °CTJ = 100 °C TJ = -40 °C TJ = 25 °C 100 1000 10000 100 1000 0.1 1 10 100 Axis Title 1st line 2nd line 2nd line Junction Capacitance (pF) Reverse Voltage (V) TJ = 25 °C f = 1.0 MHz V sig = 50 mVp-p 100 1000 10000 100 1000 0.01 0.1 1 10 100 Axis Title 1st line 2nd line 2nd line Transient Thermal Impedance (°C/W) t - Pulse Duration (s) Junction to ambient
www.vishay.com Vishay General Semiconductor Revision: 14-Jun-2019 4 Document Number: 87460 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMP (DO-220AA) Cathode Band 0.086 (2.18) 0.074 (1.88) 0.142 (3.61) 0.126 (3.19) 0.158 (4.00) 0.146 (3.70) 0.013 (0.35) 0.004 (0.10) 0.012 (0.30) 0.000 (0.00) 0.018 (0.45) 0.006 (0.15) 0.045 (1.15) 0.033 (0.85) 0.036 (0.91) 0.024 (0.61) 0.032 (0.80) 0.016 (0.40) 0.103 (2.60) 0.087 (2.20) 0.053 (1.35) 0.041 (1.05) 0.012 (0.30) REF. 0.100 (2.54) 0.105 (2.67) 0.025 (0.635) 0.030 (0.762) 0.050 (1.27)
www.vishay.com Vishay Revision: 01-Jan-2021 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gr anted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED