V390ME01 ZCOMM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
-150 -140 -130 -120 -110 -100 -90 -80 -70
1 E+3 10 E+3 100 E+3
1.5±2.5 380 0.7-4.2 -116 -15 <0.5 150 -30 to 85 Oscillation Frequency Range Phase Noise @ 10 kHz offset (1 Hz BW, typ.) Harmonic Suppression (2nd, typ.) Tuning Voltage Tuning Sensitivity (avg.) Power Output Load Impedance Input Capacitance (max.) Pushing Pulling ( dB Return Loss, Any Phase) Operating Temperature Range Package Style MINI-16M-L MHz dBc/Hz dBc Vdc MHz/V dBm pF MHz/V MHz Vdc mA Supply Voltage (Vcc, nom.) Supply Current (Icc, typ.) All specifications are typical unless otherwise noted and subject to change without notice. PHASE NOISE (1 Hz BW, typical) © Z-Communications, Inc. All rights reservedPage 1 VOLTAGE CONTROLLED OSCILLATOR
FEATURES
APPLICATIONS
PERFORMANCE SPECIFICATIONS VALUE UNITS POWER SUPPLY REQUIREMENTS APPLICATION NOTES 380 400- MHz• Frequency Range:
- Tuning Voltage: 0.7-4.2 Vdc - Style PackageMINI-16M-L A1Rev
- AN-100/1 : Mounting and Grounding of VCOs
- AN-102 : Proper Output Loading of VCOs
- AN-107 : How to Solder Z-COMM VCOs NOTES:
9939 Via Pasar • San Diego, CA 92126
TEL (858) 621-2700 FAX (858) 621-2722 -400 LOW COST - HIGH PERFORMANCE OFFSET (Hz) £(f) (dBc/Hz)
0.25 0.5 0.75 1 1.25 1.5 1.75 2.25 2.5 2.75 3.25 3.5 3.75 4.25 4.5 4.75 372 377 382 388 394 400 405 410 415 419 422 VOLTAGE CONTROLLED OSCILLATOR © Z-Communications, Inc. Page 2 Printed in the U.S.A. V390ME01 TUNING CURVE, typ. POWER CURVE, typ. PAGE 2 PHYSICAL DIMENSIONS -30 °c25 .130 .031 0.000 -.005 .465 .061 TYP .128 TYP MINI-16M-L 415-0069 REV. A (DRAWING NOT TO SCALE) SEE DETAIL 'A' P1=VT P2=RF OUT P3=Vcc .475 .025 .500 .157 .221 .500 .221 0.000 .120 GROUND PLANE SOLDER PLATED BOTTOM VIEW .255 .315 .349 0.000 .191 .251 .285 .255 .315 .349 .154 .214 .248 P4=MOD INPUT .031 SEE NOTE 3 TYPICAL OF ALL PADS .027 .033 .054 .121 .065 NOTES: THE INSIDE RADIUS OF ALL 16 HALF HOLES AT THE PERIMETER OF THE BOARD ARE PLATED TO PROVIDE A SURFACE FOR THE ATTACHMENT OF THE VCO TO A PCB, IN 13 LOCATIONS, WITH 3 PADS BEING USED FOR ELECTROMECHANICAL INTERFACE. 2. THE SURFACE OF THE SHIELD IS TIN PLATED AND MAY BE SOLDERED TO. THE SHIELD'S 3. THE GROUND PLANE IS GROUND AND ATTACHES TO A GROUND TRACK ON THE UPPER SIDE OF THE BOARD AS WELL AS THE SHIELD BY PTH. 16 SOLDER LOCATIONS REQUIRED. BASE METAL IS COLD ROLLED STEEL. .XXX= ± .010 TOLERANCES 4. UNLESS OTHERWISE NOTED ALL DIMENSIONS ARE IN INCHES. 5. UNLESS OTHERWISE NOTED ALL TOLERANCES ARE AS FOLLOWS: DETAIL A TABS RANGE FROM 0.006 - 0.010 (4 PLACES) TUNING VOLTAGE (Vdc) FREQUENCY (MHz) POWER OUTPUT (dBm) FREQUENCY (MHz)