V3731

MKP3361 ETC2 | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 17

Technical content

Supersedes data of April 1999 File under BCcomponents, BC05

2000 Feb 08

Interference suppression film capacitors

2000 Feb 08 2

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 MKP RADIAL POTTED TYPE PITCH 10/15/22.5/27.5 mm Fig.1 Simplified outlines. 296x12(full_width) P =10 mm P = 22.5 and 27.5 mm CBA207 P = 15 mm

FEATURES

• 10 to 27.5 mm lead pitch
• Supplied loose in box and taped on reel
• Consists of a low-inductive wound cell of metallized polypropylene film, potted in a flame-retardant case.

APPLICATIONS

• For X1 electromagnetic interference suppression
• Specially designed to meet the NEW REQUIREMENTS of the new “IEC 60384-14 2nd edition and EN 132400”, requiring a 4 kV peak pulse voltage test UL1414 and CSA-C22.2 No. 1 specifications. DETAIL SPECIFICATION For more detailed data and test requirements see “Type detail specification HQN-384-14/108”. QUICK REFERENCE DATA Notes 1. Pending. 2. Approved. DESCRIPTION VALUE Capacitance range (E12 series) 1 nF to 1 µF Capacitance tolerance ±20%; ±10%; ±5% Rated (AC) voltage, 50 to 60 Hz 275 V Rated (DC) voltage 630 V Climatic category 55/100/21/B Rated temperature 100 °C Maximum application temperature 100 °C Reference specifications IEC 60384-14 2 nd edition and EN 132400 Safety approvals: 250 V UL1414; CSA-C22.2 No 1; note 2

275 V UL1283; SEV; VDE; FI; N; D; S; IMQ;

ÖVE; note 2 CCEE; note 1 Materials qualified in accordance with UL94V-O Safety class X1

2000 Feb 08 3

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 SAFETY APPROVALS SAFETY APPROVALS (X1) VOLTAGE VALUE FILE NUMBERS UL1414 250 V (AC) 1 nF to 1 µF E 112471 UL1283 275 V (AC) 1 nF to 1 µF E 109565 CSA-C22.2 No.1 250 V (AC) 1 nF to 1 µF LR 94054 SEV (EN132400) 275 V (AC) 1 nF to 1 µF 99,6 60107,01 VDE (EN132400) 275 V (AC) 1 nF to 1 µF 83619 FI (EN132400) 275 V (AC) 1 nF to 1 µF 178882 NEMKO (EN132400) 275 V (AC) 1 nF to 1 µF P99102660 DEMKO (EN132400) 275 V (AC) 1 nF to 1 µF 99-06011 SEMKO (EN132400) 275 V (AC) 1 nF to 1 µF 9447024 IMQ (EN132400) 275 V (AC) 1 nF to 1 µF V 3731 ÖVE (EN132400) 275 V (AC) 1 nF to 1 µF E 260-001 VDE N D OVE. .

2000 Feb 08 4

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 COMPOSITION OF CATALOGUE NUMBER TYPE PACKAGING (1) LEAD CONFIGURATION C-TOL PREFERRED TYPES 336 1 loose in box lead length 3.5 mm ±20% 2222 336 10... lead length 25.0 mm 2222 336 16... ON REQUEST 336 1 loose in box lead length 3.5 mm ±10% 2222 336 11... lead length 25.0 mm 2222 336 17... taped on reel H = 18.5 mm; note 2 ±20% 2222 336 13... 2222 336 1X XX X TYPE AND PITCHES 336 1 10.0 mm 15.0 mm 22.5 mm 27.5 mm MULTIPLIER (nF) 0.1 2 1 3 10 4 100 5 CAPACITANCE (numerically) Example: 104 = 10 x 10 = 100 nF Notes 1) For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2) H = in-tape height; for detailed specifications refer to this handbook, chapter “Packaging information”.

2000 Feb 08 5

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 MKP 336 1 GENERAL DATA PITCH 10/15 mm Specific reference data for the 275 V AC (X1) capacitors

DESCRIPTION

T angent of loss angle: Rated voltage pulse slope (dU/dt)R at 385 V (DC) P=1 0m m 200 V/µs P=1 5m m 500 V/µs R between leads, for C ≤ 0.33 µF at 100 V; 1 minute >15000 MΩ R between leads and case; 100 V; 1 minute >30000 MΩ Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3400 V; 1 minute Withstanding (AC) voltage between leads and case 2050 V; 1 minute Fig.3 Outline. 296x12(full_width) CBA196 h lt l b P Ødt

2000 Feb 08 6

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 URac = 275 V (X1); URdc = 630 V Notes 1. l t = 3.5 ±0.3 mm for pitch = 15 mm. 2. The shading indicates preferred types. C (µF) DIMENSIONS b × h × l (mm) MASS (g) CATALOGUE NUMBER LOOSE IN BOX C-tol = ±20% catalogue number(2) last 5 digits(2) Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm 0.001 2222 336 10102 .. 16102 0.0015 2222 336 10152 .. 16152 0.0022 2222 336 10222 .. 16222 0.0033 2222 336 10332 .. 16332 0.0047 2222 336 10472 .. 16472 0.0068 2222 336 10682 .. 16682 Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm 0.01 2222 336 19001 .. 19007 0.015 2222 336 10153 .. 16153 0.022 2222 336 10223 .. 16223

2000 Feb 08 7

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 MKP 336 1 GENERAL DATA PITCH 22.5/27.5 mm Specific reference data for the 275 V AC (X1) capacitors T angent of loss angle: 100 nF < C ≤ 470 nF ≤20 × 10−4 ≤100 × 10−4 Rated voltage pulse slope (dU/dt)R at 385 V (DC) P=2 2 . 5m m 300 V/µs P=2 7 . 5m m 200 V/µs R between leads, for C ≤ 0.33 µF at 100 V; 1 minute >15000 MΩ RC between leads, for C > 0.33 µF at 100 V; 1 minute >5000 s R between leads and case; 100 V; 1 minute >30000 MΩ Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3400 V; 1 minute Withstanding (AC) voltage between leads and case 2050 V; 1 minute Fig.4 Outline. 296x12(full_width) CBA196 h lt l b P Ødt

2000 Feb 08 8

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 URac = 275 V (X1); URdc = 630 V Note 1. The shading indicates preferred types. C (µF) DIMENSIONS b × h × l (mm) MASS (g) CATALOGUE NUMBER LOOSE IN BOX lt = 3.5 ±0.3 mm l t = 25.0 ±2.0 mm C-tol = ±20% catalogue number(1) last 5 digits(1) Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm

2000 Feb 08 9

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 CONSTRUCTION

• Low-inductive wound cell of metallized polypropylene (PP) film, potted with epoxy resin in a flame-retardant polypropylene case
• Radial leads, solder-coated: – Copper clad steel wire for original pitch = 7.5, 10 and 15 mm (b ≤ 6m m ) – Copper wire for original pitch = 15 (b ≥ 7 mm), 22.5 and 27.5 mm
• Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board. Mounting NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter “Packaging information”. Fig.5 Construction. 144x12(halfpage) metal spray layer MKP metallized polypropylene film CBA198 connecting wire SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board:
• For pitches ≤15 mm capacitors shall be mechanically fixed by the leads.
• For larger pitches the capacitors shall be mounted in the same way and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors is shown in Fig.6:
• Eccentricity as in Fig.6. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.
• Product height with seating plane as given by “IEC 60717” as reference: h max ≤ h + 0.3 mm. Storage temperature
• Storage temperature: Tstg =− 25 to +40 °C with RH maximum 80% without condensation. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient temperature of 23 ±1 °C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 ±2%. For reference testing, a conditioning period shall be applied over 96 ±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. Fig.6 Lay-out. 144x12(halfpage) CBA116 eccentricity lmax = l + 0.3 mm bmax = b + 0.3 mm

2000 Feb 08 10

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 CHARACTERISTICS Capacitance Tangent of loss angle Fig.7 Capacitance change at 1 kHz as a function of temperature. 296x12(full_width) 100-50 0 50 CBA505 Tamb (°C) ∆C/C (%) max. typical min. Fig.8 Tangent of loss angle as a function of frequency: typical curves. 296x12(full_width) CBA877 105104103102101 100 101 102 f (Hz) dissipation factor (x 10 -4) C ≤ 10 nF 10 nF < C ≤ 47 nF 47 nF < C ≤ 220 nF 220 nF < C ≤ 1µF C = 1 µF

2000 Feb 08 11

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 Impedance Resonant frequency Fig.9 Impedance as a function of frequency: typical curves. 296x12(full_width) 108 CBA208 10 7106105104 103 10-2 10-1 100 101 102 f (Hz) Impedance (Ω) 10 nF 47 nF 100 nF 470 nF 1000 nF 4.7 nF 1 nF Fig.10 Resonant frequency as a function of capacitance: typical curves. 296x12(full_width) CBA878 1000 nF100 nF10 nF1nF 102 10 -1 100 101 C (nF) f (MHz)

2000 Feb 08 12

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 Maximum RMS voltage and AC current (sinewave) as a function of frequency for Tamb ≤ 100 °C Fig.11 AC voltage (RMS value) as a function of frequency at T amb ≤ 100 °C. 296x12(full_width) AC voltage (V) f (Hz) 105 CBA210 104103102101 103 101 102 Fig.12 AC current (RMS value) as a function of frequency at T amb ≤ 100 °C. 296x12(full_width) CBA936 105104103102101 AC current (mA) f (Hz) 470 nF 100 nF 47 nF 10 nF 1000 nF 4.7 nF 1 nF

2000 Feb 08 13

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 Insulation resistance APPLICATION NOTES

• For X1 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 275 V (AC).
• These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and
• The maximum ambient temperature must not exceed 100 °C.
• Rated voltage pulse slope: – If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 385 V (DC) and divided by the applied voltage. Fig.13 RC product as a function of ambient free air temperature: typical curve. 296x12(full_width) CBA204 0 2 04 06 08 0 1 0 0 106 104 105 RC (s) Tamb(°C)

2000 Feb 08 14

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 MARKING Product marking The capacitors are marked by laser print; on the top for pitch ≥ 22.5 mm (see Fig.16), on the top and one side for pitch = 15 mm (see Fig.15) or on one side for pitch = 10 mm (see Fig.14) with the following information: 1. Rated capacitance code in accordance with “IEC 60062” 2. Tolerance on rated capacitance; M =± 20%; K =± 10%; J =± 5% 3. Rated (AC) voltage (275 V) 4. Sub-class (e.g. X1) 5. Manufacturer ’s type designation (e.g. 336 1) 6. Code for dielectric material (MKP) for pitch ≥15 mm 7. Manufacturer 8. Year and week of manufacture (e.g. 0001) for pitch ≥15 mm 9. Safety approvals: products will be marked with approvals depending on the available marking space per product. Although all approvals remain valid as indicated in the reference data. 144x12(halfpage) FRONT FACE CBB055 250V~ 10n M 336 1 BC 275V~X1 VDEN D PB501 ÖVE Fig.14 Example of marking for a capacitor with pitch = 10 mm. 144x12(halfpage)HEAD FACE FRONT FACE 100n M 275V~X1 336 1 MKP CBB056 V D E EN132400 BC 0001 PB501 250V~ OVE Fig.15 Example of marking for a capacitor with pitch = 15 mm. 144x12(halfpage) 220n M 275V~ 336 1 MKP BC 0001 V D E HEAD FACE PB501 EN132400 250V~ CBB057 OVE Fig.16 Example of marking for a capacitor with pitch = 22.5 or 27.5 mm.

2000 Feb 08 15

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 Package marking The package containing the capacitors is marked as shown Fig.17. Fig.17 Barcode label. Barcode label marking LINE MARKING EXPLANATION

1 Manufacturer ’s name

2 Country of origin

3 Sub-family

4 T ype description and sub class

5 Capacitance value, tolerance, voltage and

climatic category (“IEC 60068-1”)

6 Safety approvals

7 Preference origin code: A

Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO Wage number of final inspection (only for capacitors with pitch = 10 mm)

8 Product type description

9 Quantity and production period, year and

10 Product code (12NC)

2000 Feb 08 16

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 QUICK REFERENCE TEST REQUIREMENTS (see note 1) TEST PROCEDURE (quick reference) REQUIREMENTS Robustness of leads T ensile strength: “IEC 60068-2-21” load 10 N; 10 s no visible damage legible marking ∆C/C≤ 5% ∆tan δ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ≤ 70 × 10−4 (C > 470 nF); note 2 Bending: “IEC 60068-2-21” load 5 N; 4 × 90 ° Resistance to soldering heat: “IEC 60068-2-20” solder bath: 260 °C; 10 s Component solvent resistance isopropyl alcohol; 23 °C; 5 minutes Robustness of component Rapid change of temperature: “IEC 60068-2-14” 5c y c l e s 1c y c l e= 30 minutes at −55 °C and 30 minutes at 100 °C ∆C/C≤ 5% ∆tan δ≤ 100 × 10 −4 (C ≤ 100 nF); note 2 ∆tan δ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ≤ 70 × 10−4 (C > 470 nF); note 2 Vibration: “IEC 60068-2-6” 10 to 55 Hz; amplitude 0.75 mm; 6 hours Shock: “IEC 60068-2-27” half sinewave; 490 m/s2; 11 ms Climatic sequence Dry heat: “IEC 60068-2-2” 16 hours; 100 °C ∆C/C≤ 5% ∆tan δ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ≤ 70 × 10−4 (C > 470 nF); note 2 Rins ≥ 50% of specified value Damp heat, cyclic, test Db, first cycle: “IEC 60068-2-30” Cold: “IEC 60068-2-1” 2h o u r s ; −55 °C Damp heat, cyclic, test Db, remaining cycles: “IEC 60068-2-30” Voltage proof: “IEC 60384-14” V p = 1200 V (DC); 1 minute Other applicable tests Damp heat, steady state: “IEC 60068-2-3” 21 days; 40 °C; 90 to 95% RH no load Vp = 1200 V (DC); 1 minute ∆C/C≤ 5% ∆tan δ≤ 70 × 10−4 Rins ≥ 50% of specified value Endurance (AC): “IEC 60384-14” 3 × 4.0 kV pulse voltage 1000 hours; 1.25 × URac at 100 °C; once per hour; 0.1 s;

1000 V (RMS) via resistor of 47 Ω;

Vp = 1200 V (DC); 1 minute ∆C/C≤ 10% ∆tan δ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ≤ 70 × 10−4 (C > 470 nF); note 2 Rins ≥ 50% of specified value

2000 Feb 08 17

BCcomponents Product specification Interference suppression film capacitors MKP 336 1 Notes 1. For detailed information: see “Type detail specification HQN-384-14/108 ”. 2. Measuring frequency 100 kHz for C ≤ 470 nF and 10 kHz for C > 470 nF. Charge and discharge: “IEC 60384-14” 10000 cycles; 5 ms; 1.5 × dV/dt ∆C/C≤ 10% ∆tan δ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ≤ 70 × 10−4 (C > 470 nF); note 2 Rins ≥ 50% of specified value Passive flammability: “IEC 60384-14” class B no burning Active flammability: “IEC 60384-14” 20 × 4 kV discharge no burning Heat storage: “IEC 60384-14” 1000 hours; 100 °C ∆C/C≤ 5% ∆tan δ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ≤ 70 × 10−4 (C > 470 nF); note 2 Resistance to soldering heat with preheating: “IEC 60384-14” preheating: 100 °C; solder bath: 260 °C; 10 s ∆C/C≤ 5% ∆tan δ≤ 100 × 10 −4 (C ≤ 100 nF); note 2 ∆tan δ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ≤ 70 × 10−4 (C > 470 nF); note 2 Active flammability test Voltage proof up to 2 × peak impulse voltage of 4.13 or until breakdown (100 V/sec, current limited 2mA) Failed capacitors connected to a

250 V (AC) power supply during

(quick reference) REQUIREMENTS