UPZW6121MHD

UPZ NICHICON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 2

Technical content

ALUMINUM ELECTROLYTIC CAPACITORS UPZ High Voltage, Miniature-sized High ripple current. Load life of 2000 hours at 105°C. Suited for ballast applications. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UPZ UPT Smaller Smaller UPH Dimension table in next page. U P Z D M 9 1 0 1 1 Capacitance tolerance (±20%) Rated capacitance (220µF) Rated voltage (200V) H D T Size code Series name Type Radial Lead Type Type numbering system (Example : 200V 220µF) Configuration φ D Pb-free leadwire Pb-free PET sleeve PD 12.5 to 18 HD Configuration φD P 5.0 12.5 5.0 7.5 7.5 φd 0.6 0.8 0.8 0.8 (mm) P±0.5 L± 2.0 15min. 4min. φD±0.5max. Pressure relief vent Sleeve (PET) φ d Specifications Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current ※ Tangent of loss angle (tan δ) Stability at Low Temperature Endurance Marking Performance CharacteristicsItem –40 to +105°C 200 to 450V 18 to 470µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.04CV+100 (µA). Printed with white color letter on dark brown sleeve. After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Measurement frequency : 120Hz The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Rated voltage (V) Impedance ratio (max.) 200 400 420 450 Measurement frequency : 120Hz at 20°C Rated voltage (V) tan δ (max.) 200 0.12 420 0.20 450 0.20 400 0.15 Shelf Life Capacitance change Leakage current tan δ Within ± 20% of the initial capacitance value Less than or equal to the initial specified value 200% or less than the initial specified value Frequency coefficient of rated ripple current V 200 400 to 450 60Hz 0.80 0.80 120Hz 1.00 1.00 500Hz 1.20 1.25 1kHz 1.30 1.40 10kHz or more 1.40 1.50 ※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V) Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. CAT.8100N

ALUMINUM ELECTROLYTIC CAPACITORS UPZ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） Case Size φD×L （mm） tan δ Leakage Current （µA） Rated Ripple （mArms） （105℃/120Hz） Part Number at 20℃ after 1 minute ） 200 （2D） 82 10×30.5 0.12 756 400 UPZ2D820MPD 150 12.5×30.5 0.12 1300 620 UPZ2D151MHD 180 12.5×35.5 0.12 1540 700 UPZ2D181MHD 220 12.5×40 0.12 1860 800 UPZ2D221MHD 270 16×30.5 0.12 2260 870 UPZ2D271MHD 330 16×35.5 0.12 2740 1010 UPZ2D331MHD 330 18×30.5 0.12 2740 1010 UPZ2D331MHD6 390 16×40 0.12 3220 1130 UPZ2D391MHD 390 18×35.5 0.12 3220 1120 UPZ2D391MHD6 470 18×40 0.12 3860 1270 UPZ2D471MHD 400 （2G） 27 10×30.5 0.15 532 240 UPZ2G270MPD 47 12.5×30.5 0.15 852 370 UPZ2G470MHD 56 12.5×35.5 0.15 996 420 UPZ2G560MHD 68 12.5×40 0.15 1188 480 UPZ2G680MHD 100 16×30.5 0.15 1700 580 UPZ2G101MHD 120 16×35.5 0.15 2020 670 UPZ2G121MHD 120 18×30.5 0.15 2020 670 UPZ2G121MHD6 150 16×40 0.15 2500 770 UPZ2G151MHD 150 18×35.5 0.15 2500 770 UPZ2G151MHD6 180 18×40 0.15 2980 880 UPZ2G181MHD 420 （W6） 22 10×30.5 0.20 469.6 200 UPZW6220MPD 39 12.5×30.5 0.20 755.2 310 UPZW6390MHD 47 12.5×35.5 0.20 889.6 360 UPZW6470MHD 56 12.5×40 0.20 1040.8 430 UPZW6560MHD 68 16×30.5 0.20 1242.4 510 UPZW6680MHD 82 16×35.5 0.20 1477.6 570 UPZW6820MHD 100 16×40 0.20 1780 610 UPZW6101MHD 100 18×30.5 0.20 1780 610 UPZW6101MHD6 120 18×35.5 0.20 2116 660 UPZW6121MHD 150 18×40 0.20 2620 710 UPZW6151MHD 450 （2W） 18 10×30.5 0.20 424 180 UPZ2W180MPD 33 12.5×30.5 0.20 694 280 UPZ2W330MHD 39 12.5×35.5 0.20 802 320 UPZ2W390MHD 47 12.5×40 0.20 946 380 UPZ2W470MHD 56 16×30.5 0.20 1108 440 UPZ2W560MHD 68 16×35.5 0.20 1324 490 UPZ2W680MHD 82 16×40 0.20 1576 550 UPZ2W820MHD 82 18×30.5 0.20 1576 550 UPZ2W820MHD6 100 18×35.5 0.20 1900 650 UPZ2W101MHD 120 18×40 0.20 2260 740 UPZ2W121MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100N