DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

ALUMINUM ELECTROLYTIC CAPACITORS Trimmed (Cut)or Formed Leads Radial lead type In order to identify correct part number for the processed lead product, cut/formed lead code must be added to bulk part number. If the bulk part number is up to 11th digit, processed lead coding shall be as follows: In case 12th digit is alphabet, it shall be: In case 12th digit is numeral, it shall be: ∗Lead diameter (φd)and lead pitch (P)are subject to capacitor specifications.Conductive polymer aluminum solid electrolytic capacitors : Cutting configurations only End seal Configuration Please contact us about the FPCAP. 12 13 code 12 13 14 code 14 15 code 1612 13 Cut / Formed lead code Dimensions (mm) Configurations Code Case length φDF L r Lead configurations 5mmL,7mmL 5 5 5.0 Other length 6.3 — Forming and cutting 4 — 5mmL,7mmL 5 5 3.5 Other length 6.3 — 8 — 3 1.0 — 4 1.5 — 5 2.0 — 6.3 2.5 — 8 3.5 — 5.0 —All length 12.5 — 7.5 Cutting 18 — 22 — 25 12.5 — All length Same as above. 4.5 — All length Same as above. 4.0 — All length Same as above. 3.5 — All length Same as above. 3.2 — All length Same as above. 3.0 — 5mmL,7mmL 5 5 4.5 1.1 Other length 6.3 8 1.3 5Snap-in 12.5 4.5 1.316 7.5All length 18 1022 5.0 1.8 25 12.5 (Code , ) 1.5MAX.BA BB (Code , ) 2.5MAX.FA FV φD φd L±0.5 F±0.5P±0.5 (mm) L±0.5 φD F±0.5 φd (Code ) 1.5 MAX.A E (Code ) 2.5 MAX. (φ4, 5, 6.3, 8) (φ10, 12.5, 16, 18, 20, 22, 25) A A φD φd φD φd r r L±0.5 F±0.5 L±0.5 F±0.5P±0.5 B A B B F V C A C P C C C V C T C M A A A E A A F A φ 8 × 5 = F: 2.5 Please contact us for the φ 16 toφ 25 ×12.5L products. Configuration Exception : φ5, φ6.3 case size of MA, MR, MF, MP, MT, MW, SA, SF, SP, SR, ST, SW, PW (7mmL), TT (7mmL) series : configration 1 Exception :φ6.3 × 6mmL, φ6.3 × 9mmL, φ8 × 7mmL, φ8 × 9mmL, φ10 ×8mmL, φ10 × 10mmL size of LF LE , LG , LS , LV , LX series, MV, SV, PV series will be put at 12th digit of type numbering system of CS, PZ series: configration 2 Exception : Conductive polymer aluminum solid electrolytic capacitors 3φ 5 6.3 4 8 10 12.5 16 18 20 22 25 Please refer to page26 about the FPCAP product spec. CAT.8100C

Radial lead type (Applicable standard JIS C0806-2) In order to identify correct part number for the taped product, taping code must be added. If the bulk part number is up to 11th digit, taping code shall be as follows: In case 12th digit is numeral, it shall be Taped Leads for Automatic Insertion Systems Notes: Conductive polymer aluminum solid electrolytic capacitors 12 13 14 code 12 13 code In case 12th digit is alphabet, it shall be 12 13 14 15 code Specifications Capacitor Taping code diameter Packaging Lead style Leader FP 0 (φ) Code Applicable size Formed lead See Table 1 12.7 3 to 8 TP φ 4 to 8 Case length (5mmL), φ6.3× 6 Ammo-pack See Table 2 12.7 4 to 10 TP φ 4 to 6.3 Case length (7mmL), φ 4 Straight lead TD See Table 2 15.0 12.5 TO (φ 12.5× 12.5 to 25) See Table 2 15.0 16, 18 TN (φ16 ×15 to 25, φ18× 15 to 25) T E φ 4 to 8 Case length (5mmL, 7mmL) T P (φ 3 ×5, φ4 ×11) T A (φ5× 9 to φ8× 9, φ 4× 11 to φ8× 20) (mm) ALUMINUM ELECTROLYTIC CAPACITORS φ 5× 9 or more, φ6.3×9 or more, φ 8× 7 or more, φ10× 8 to 25) Notes: 1 F = 2.0mm is also available, provided that capacitor case length is less than 9mm. Taping code to be .

2 Tolerance on F for φ16 and φ18 units

shall be ±0.8mm.

3 Tolerance on Ho for φ3 units shall be

16.0 MIN. Case Size Straight Lead Type Case dia (φ) × Length (L) Tolerance φ 16 Item φ 5 φ 6.3 φ 8 × 5 φ 8 ×7 φ 8 φ 10 φ 12.5 φ 18 TP TP, TD TP, TD TP TD TD TD TO TN +0.8 –0.2 +0.75 –0.5 0.45 0.5, 0.6 0.45 0.5, 0.6 Feed hole center to component center Lead-to-lead distance Height of component from tape center Hold down tape width 5.1 ( 1 5.35) 5.1 ( 1 5.35) Formed Lead Type Case dia (φ ) × Length (L) Tolerance φ 3 ×5 φ 4 ×11 Item TP TP TE TA TA Feed hole center to component center Lead-to-lead distance Height of component from tape center Lead-wire clinch height Hold down tape width +0.8 –0.2 +0.75 –0.5 (Formed lead type) (Straight lead type) H P P2 F φd D 0 w w 0 H 0 K H P P2 P0 φd D 0 w w 0 F t t Table 1 Table 2 (mm) (mm) Case Size Taping C ode Taping C ode TC F φ4, 5 φ4 × 5 φ5 × 5 φ6.3 × 5 φ8 × 5 φ4 × 7 φ5 × 7 φ 6.3 × 7 φ8 × 7 φ 4 × 11 φ 5 × 9 φ 5 × 11 φ 5 × 15 φ 6.3 × 9 φ 6.3 × 11 φ 6.3 × 15 φ 8 × 9 φ 8 × 11.5 φ 8 × 15 φ 8 × 20 Special taping specifications on H. F. and K. dimensions other than the above figures are available upon request. Conductive polymer aluminum solid electrolytic capacitors : Straigh lead type only Only the above mentioned dimensions are specified. φ4 ×5 φ4 ×7 Please refer to page26, 27 about the FPCAP product spec. CAT.8100C

ALUMINUM ELECTROLYTIC CAPACITORS L H W Q'ty / BoxCase Size (φ D × L) 3 × 5 4 × 5, 4 × 7 5 × 5, 5× 7 8 × 5, 8× 7, 8× 8 10 × 8, 10 × 9, 10 × 10, 10 × 12.5, 10 × 13, 10 × 15, 10 × 16 8 × 20 10 × 20 12.5× 25 18 × 15, 18× 20, 18× 25 16 × 15, 16× 20, 16× 25 340 340 340 340 340 340 340 330 320 340 340 150 200 300 300 200 260 200 290 230 260 250 (mm) 2,000 2,000 2,000 1,000 2,000 2,000 1,000 500 2,000 10 × 25340 200 65 500 1,000 500 250 250 500 Axial lead type (Applicable standard JIS C0805) The following code shall be put at 12th to 14th digit of the corresponding type number of capacitors. Packaging Ammo-pack (Flat box type) Taping Specifications Dim. W (Tape distance) Dim. P (Component Pitch) 52.4 10 63.5 10 73.0 10 52.4 15 63.5 15 73.0 15 Case dia (φ) Taping code 1LS 1LV 1LY 1LT 1LW 1LZ Q'ty / Reel (pcs.) 6.3 6.3 6.3 (except 31.5L) 1,600 1,300 1,000 1,600 1,300 1,000 1,600 1,300 1,000 500 350 500 350 500 350 Please contact us for complete information on the package dimensions for tapes axial lead capacitors. L H W w ±1.5 w ±1.2 6±1 P ± 0.5 1.2MAX. 2MAX. White tape for positive polarity Blue or yellow tape for negative polarity D (mm) CAT.8100C

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS Lead forming (Radial lead type) NS, R7, R5, L8, E5, S8, F8, NU, NE, S6, HT series NS, R7, R5, L8, E5, S8, F8, NU, NE, S6, HT series Components are packaged as per following packing unit. Packing Quantity (Bulk) Cut Lead (Bulk) Dimensions Case Size Long Lead Cut Lead Quantity vinyl bag (PCS) Quantity vinyl bag (PCS) Minimum quantity (PCS / Carton Box) Minimum quantity (PCS / Carton Box) Please note the order quantity must be in multiples of the minimum quantity. Lead Forming (Symbol:CG) Nichicon P/N FPCAP P/N [Unit : mm] Item Lead Forming Symbol Lead Wire Diameter Lead Wire Length Lead Wire Interval Note : Please inquire for FPCAP by Packing Unit as above. Taped Leads for Automatic Insertion Systems (Radial lead type) Packing Quantity(Ammo Pack) Size (dia) Minimum quantity (pcs / Ammo Pack) Ammo pack [Unit : mm] Polarity mark The lid of feeding side of the taping box shall be torn off at the perforation line. CAT.8100C

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS Nichicon P/N Symbol FPCAP P/N Symbol Nichicon P/N Symbol FPCAP P/N Symbol to to П П П П Taping Dimensions Lead Forming ( Symbol:Ex. PX ) Nichicon P/N Symbol FPCAP P/N Symbol 2.5mm pitch taping Taping Dimensions for 2.5mm pitch taping Taping Dimensions for Nichicon P/N Symbol FPCAP P/N Symbol Nichicon P/N Symbol FPCAP P/N Symbol 5.0mm pitch taping 3.5mm or 5.0mm pitch taping Taping Dimensions for Taping Dimensions for [Unit : mm]Specification Table Item Lead Forming Symbol (Nichicon P/N) Lead Forming Symbol (FPCAP P/N) Lead Wire Interval Pitch Between Components Feed Holes Position Gap Feed Holes Position Gap Feed Holes Position Gap Feed Holes Diameter Lead Wire Clinch Height Components Height Components Alignment Tape Thickness Base Tape Lead Wire Diameter Tolerance CAT.8100C