DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
WWW.Microsemi .COM UPS5100
5 A High Voltage Schottky Barrier Rectifier
DESCRIPTION
In Microsemi’s new Powermite3® SMT package, these high efficiency ultrafast rectifiers offer the power handing capabilities previously found only in much larger packages. They are ideal for SMD applications that operate at high frequencies. In addition to its size advantages, Powermite3® package features include a full metallic bottom that eliminates the possibility of solder flux entrapment during assembly, and a unique locking tab acts as an integral heat sink. Its innovative design makes this device ideal for use with automatic insertion equipment. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www microsemi.com ABSOLUTE MAXIMUM RATINGS AT 25º C (UNLESS OTHERWISE SPECIFIED) Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 100 V RMS Reverse Voltage V R (RMS) 70 V Average Rectified Output Current Io 5 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine wave Superimposed on Rated Load@ Tc =80 ºC IFSM 100 A Storage Temperature T stg -65 to +150 ºC Operating Temperature T op -65 to +125 ºC THERMAL CHARACTERISTICS (UNLESS OTHERWISE SPECIFIED) Thermal Resistance Junction-to Bottom Rja (1) 2.5 ºC/Watt (1) When Mounted on PC board with 2 ounce copper pattern. KEY FEATURES ! High power surface mount package. ! Guard Ring die construction for transient protection. ! Silicon Schottky rectifiers no reverse voltage recovery. ! Internal heat sink locking tabs ! Low forward voltage. ! Full metallic bottom eliminates flux entrapment ! Compatible with automatic insertion equipment ! Low profile-maximum height of 1mm supplied in 16 mm tape reel- 5000 units/ 13” reel. APPLICATIONS/BENEFITS ! Switching and Regulating Power Supplies. ! Charge Pump Circuits. ! Reduces reverse recovery loss due to low IRM. ! Small foot print
190 X 300 mils
1:1 Actual size UUPPSS55110000 Copyright 2001 Rev. 0, 2003-02-12
WWW.Microsemi .COM Note: 1 Short duration test pulse used to minimize self – heating effect. ELECTRICAL PARAMETERS @ 25°C (unless otherwise specified) Parameter Symbol Conditions Min Typ. Max Units Forward Voltage (Note 1) VFm IF = 5 A , Tj = 25 ºC IF = 5 A , Tj = 125 ºC IF = 10 A , Tj = 25 ºC IF = 10 A , Tj = 125 ºC 0.75 0.58 0.84 0.67 0.81 0.64 0.90 0.73 V Reverse Break Down Voltage (Note 1) VBR IR = 0.2 mA 100 V Reverse Current (Note1) Irm VR = 100V, Tj = 25ºC VR = 100V, Tj = 125 ºC 200 µA mA Capacitance CT VR = 4 V; F = 1 MHZ 150 pF Microsemi Page 2Copyright 2001 Rev. 0, 2003-02-12
WWW.Microsemi .COM PAD LAYOUT EELECCTRRIICCALLSS Microsemi Page 3Copyright 2001 Rev. 0, 2003-02-12
WWW.Microsemi .COM 16 mm TAPE
13 INCH REEL
PRODUCT PRELIMINARY DATA – Information contained in this document is pre-production data, and is proprietary to Microsemi Corp It may not be modified in any way without the express written consent of Microsemi Corp Product referred to herein is not guaranteed to achieve preliminary or production status and product specifications, configurations, and availability may change at any time Microsemi Page 4Copyright 2001 Rev. 0, 2003-02-12
WWW.Microsemi .COM NOTES: NOOTEESS Microsemi Page 5Copyright 2001 Rev. 0, 2003-02-12