UPS120 MICROSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

MSC0889.PDF 07-31-98 UPS120 SURFACE MOUNT 1A SCHOTTKY RECTIFIER POWERMITEÒ Power Surface Mount Package Features:

  • Low Profile -- Maximum Height of 1.1 mm
  • Small Footprint -- Footprint Area of 8.45 mm 2
  • Low VF Provides Higher Efficiency and Extends Battery Life
  • Supplied in 12 mm Tape and Reel -- 12,000 Units per Reel
  • Low Thermal Resistance with Direct Thermal Path of Die on Exposed Cathode Heat Sink Mechanical Characteristics:
  • Powermite is JEDEC Registered as DO-216AA
  • Case: Molded Epoxy
  • Epoxy Meets UL94, VO at 1/8"
  • Weight: 62 mg (appoximately)
  • Device Marking: S20
  • Lead and Mounting Surface Temperature for Soldering Purposes,
  • 260°C Maximum for 10 Seconds Description: The UPS120 Powermite Schottky rectifier is designed to offer optimized forward voltage characteristics for battery powered portable products such as cellular and cordless phones, chargers, notebook computers, printers, PDA's and PCMCIA cards. Typical applications include ac/dc and dc-dc converters, reverse battery protection and "Oring" of multiple supply voltages. The Powermite's patented heat sink design offers the same thermal performance rating as an SMA while being 50% smaller in footprint area and less than 1 mm in overall height. The result is a unique, highly efficient Schottky rectifier in a space saving surface mount package. Maximum Ratings RATING SYMBOL VALUE UNIT Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 20 V Average Rectified Forward Current (At Rated VR, TC = 135°C) IO 1.0 A Peak Repetitive Forward Current (At Rated VR, Square Wave, 100 KHz, TC = 135°C IFRM 2.0 A Non-Repetitive Peak Surge Current (Non-Repetitive peak surge current, halfwave, single phase, 60 Hz) IFSM 50 A Storage / Operating Case Temperature Tstg, TC -55 to 150 °C Operating Junction Temperature TJ -55 to 125 °C Voltage Rate of Change (Rated V R, TJ = 25°C) dv/dt 10,000 V/ms Thermal Characteristics Thermal Resistance - Junction-to-Lead (Anode) (1} Thermal Resistance - Junction-to-Tab (Cathode) (1} Thermal Resistance - Junction-to-Ambient (1} Rtji Rtjtab Rtja 248 °C/W (1) Pulse Test: Pulse Width £ 250 ms, Duty Cycle £ 2%. 580 Pleasant St. Watertown, MA 02472 PH: (617) 926-0404 FAX: (617) 924-1235 SCHOTTKY BARRIER RECTIFIER

1.0 AMPERES

20 VOLTS

MSC0889.PDF 07-31-98 UPS120

Electrical Characteristics

Maximum Instantaneous Forward Voltage (1), See Figure 2 VF TJ = 25°C TJ = 85°C V (IF = 0.1 A) (IF = 1.0 A) (IF = 3.0 A) 0.34 0.45 0.65 0.25 0.415 0.67 Maximum Instantaneous Reverse Current, See Figure 4 IR TJ = 25°C TJ = 85°C mA (VR = 20 V) (VR = 10 V) 0.40 0.10 (1) Pulse Test: Pulse Width £ 250 ms, Duty Cycle £ 2%. MECHANICAL DIMENSIONS Figure 1

MSC0889.PDF 07-31-98 UPS120 * Reverse power dissipation and the possibility of thermal runaway must be considered when operating this device under any reverse voltage conditions. Calculations of TJ therefore must include forward and reverse power effects. The allowable operating TJ may be calculated from the equation: TJ = TJmax = r(t)(Pf + Pr) where r(t) = thermal impedance under given conditions. Pf = forward power dissipation, and Pr = reverse power dissipation This graph displays the derated allowable TJ due to reverse bias under DC conditions only and is calculated as TJ = TJ max - r(t)Pr, Where r(t) = Rthja. For other power applications further calculations must be performed. Preliminary Data Preliminary Data Preliminary Data

MSC0889.PDF 07-31-98 UPS120 Preliminary Data Preliminary Data