UPM3012 POWER-ONE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
(888) IPD-CONVerters G (888) 473-2668 G www.ipdconverters.com C-96 10 20 30 40 50 60 70 80 90 100 LOAD % EFFICIENCY % EFF. (4.5V) EFF. (5V) EFF. (5.5V) UPM SERIES - NON-ISOLATED, 40 WATT
FEATURES
UPM non-isolated DC/DC buck converters deliver high power and excellent transient response in a compact 1.0” x 2.0” x 0.475” package. The UPM can provide up to 40 Watts of output power at 12A output current, and output voltages from 1.2 to 3.3V . Featuring open- frame, 100% surface-mount construction and high efficiency, the UPM excels in difficult thermal environments. High Power Converter High Efficiency Excellent T ransient Response Sense Pins
DESCRIPTION
Surface-Mount Construction Voltage T rim Low Profile Water Washable Efficiency vs. Load (5V Input) Notes † MTBF predictions may vary slightly from model to model. Specifications typically at 25°C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with commercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information. Units are water-washable and fully compatible with commercial spray or immersion post wave-solder washing equipment. Switching Frequency 200 kHz Temperature Coefficient 50 ppm/°C Baseplate Operating Temperature 0 to +100°C Storage Range -40 to +100°C Internal Input Capacitance 500 µF Max. Recommended External Capacitance Input 200 µF/A Iout Output 200 µF/A Iout Load Capacitance Compensation User Selectable Humidity Max., Non-Condensing 95% Vibration, 3 Axes, 5 Min Each 5 g, 10 - 55 Hz MTBF † (Bellcore TR-NWT-000332) 2.9 x 10 6 hrs Safety UL, CSA, EN60950 Weight (approx.) 0.9 oz General Setpoint Accuracy ±1% Line Regulation Vin Min. - Vin Max., Iout Rated 1% V out Load Regulation Iout Min.- Iout Max., Vin Nom. 1% V out Ripple and Noise, DC - 200 MHz 50 mV Pk-Pk Remote Sense Headroom 0.25 V Current Limit Protection Type Hi ccup Current Limit Threshold Range, % of I out Rated 130% Short Circuit Protection Type Latching V out Ramp Up Rate, Minimum 0.5V/ms Output TECHNICAL SPECIFICATIONS Voltage Range 3.3 VDC Nominal 3.0 - 3.6 VDC 5.0 VDC Nominal 4.5 - 5.5 VDC Input
UPM SERIES - NON-ISOLATED, 40 WATT Natural Convection 9.4 °C/W 100 LFM 6.6 °C/W 200 LFM 4.3 °C/W 300 LFM 3.2 °C/W 400 LFM 2.7 °C/W Tolerances MECHANICAL DRA WING Inches: (Millimeters) Pin: ± 0.002 ± 0.05 (Dimensions as listed unless otherwise specified.) Thermal Impedance Note: Thermal impedance data is dependent on many environmental factors. The exact thermal performance should be validated for specific application. Pin Function 1- V in 2+ V in 3- V out 4+ V out 5 -Vsense
6 Ground
7 Loop Comp. 8 No Conn. 9T r im 10 +Vsense MODELS - (See the last page of this file for options.) Vin (Volts) Vin Range (Volts) Iin Max.* (Amps) Vout (Volts) Iout Rated (Amps) Efficiency Typ. ** Model 3.3 3.3 3.3 3.3 3.0 - 3.6 3.0 - 3.6 3.0 - 3.6 3.0 - 3.6 4.5 - 5.5 4.5 - 5.5 4.5 - 5.5 4.5 - 5.5 4.5 - 5.5 4.5 - 5.5 5.2 6.3 7.5 8.5 4.1 5.1 6.0 6.8 7.9 10.0 1.2 1.5 1.8 2.1 1.2 1.5 1.8 2.1 2.5 3.3 78% 79% 81% 82% 78% 79% 81% 82% 84% 88% UPM 301.2 UPM 301.5 UPM 301.8 UPM 302.1 UPM 501.2 UPM 501.5 UPM 501.8 UPM 502.1 UPM 502.5 UPM 503.3 Denotes advanced product release. Consult factory for product availability. * Maximum input current at minimum input voltage, maximum rated output power . ** At n omina l Vin , r a t ed out put . /K31/K30 /K39 /K38 /K37 /K36 /K35 /K34 /K33 /K32 /K31 /K42/K4F/K54/K54/K4F/K4D /K56/K49/K45/K57 /K2D/K30/K2E/K31/K32/K35/K22/K28/K2D/K33/K2E/K32/K6D/K6D/K29 /K30/K2E/K36/K32/K35/K22/K28/K31/K35/K2E/K39/K6D/K6D/K29 /K30/K2E/K35/K32/K35/K22/K28/K31/K33/K2E/K33/K6D/K6D/K29 /K30/K2E/K34/K32/K35/K22/K28/K31/K30/K2E/K38/K6D/K6D/K29 /K30/K2E/K33/K32/K35/K22/K28/K38/K2E/K33/K6D/K6D/K29 /K30/K2E/K32/K32/K35/K22/K28/K35/K2E/K37/K6D/K6D/K29 /K30/K2E/K31/K32/K35/K22/K28/K33/K2E/K32/K6D/K6D/K29 /K30/K2E/K37/K35/K30/K22/K28/K31/K39/K2E/K30/K6D/K6D/K29 /K30 /K28/K31/K32/K2E/K31/K6D/K6D/K29 /K30/K2E/K34/K37/K35/K22 /K28/K33/K2E/K30/K6D/K6D/K29 /K30/K2E/K31/K32/K22 /K28/K31/K2E/K35/K6D/K6D/K29 /K44/K49/K41 /K30/K2E/K30/K36/K30/K22 /K28/K30/K2E/K36/K6D/K6D/K29 /K30/K2E/K30/K32/K35/K22 /K53/K51/K2E /K28/K35/K30/K2E/K38/K6D/K6D/K29 /K32/K2E/K30/K30/K22 /K31/K2E/K30/K30/K22 /K28/K32/K35/K2E/K34/K6D/K6D/K29 /K30 /K28/K2D/K33/K2E/K32/K6D/K6D/K29 /K2D/K30/K2E/K31/K32/K35/K22 /K28/K33/K37/K2E/K35/K6D/K6D/K29 /K31/K2E/K34/K37/K35/K22 /K28/K34/K34/K2E/K35/K6D/K6D/K29 /K31/K2E/K37/K35/K30/K22
When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and add them to the model number. Example ordering options are located below the options table. OPTION SUFFIX APPLICABLE SERIES REMARKS Negative Logic N HAS, HBD, HBS, HES, LES, QBS, QES, TES, TQD TTL “Low” Turns Module ON TTL “High” Turns Module OFF Lucent Compatible Trim T HAS, HBD, HBS, HES, QBS, QES Term inal Strip TS XW S, XWD, XWT Trim 1 IAS, LES Enable 2 IAD, IAS, LES, SMS Trim and Enable 3 IAS, LES Current Share 4 SMS Headerless Y Encapsulated EWS, IWS, OWS PIN LENGTH AND HEATSINK OPTIONS Standard Pin Length is 0.180” (4.6mm) 0.110” (2.8mm) Pin Length 8 All Units (Except SMS) 0.150” (3.8mm) Pin Length 9 All Units (Except SMS) 0.24” (6.1mm) Horizontal Heatsink 1H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.24” (6.1mm) Vertical Heatsink 1V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.45” (11.4mm) Horizontal Heatsink 2H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.45” (11.4mm) Vertical Heatsink 2V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.95” (24.1mm) Horizontal Heatsink 3H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.95” (24.1mm) Vertical Heatsink 3V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95” vertical heatsink. LES015YJ-3N = LES015YJ with optional trim and enable, negative logic. QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length. NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice.