UPH NICHICON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100L UPH High Voltage, Miniature-sized High ripple current. Load life of 2000 hours at 105°C. Suited for ballast applications. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Specifications Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current ※ Tangent of loss angle (tan δ) Stability at Low Temperature Endurance Marking Performance CharacteristicsItem –40 to +105°C 400 to 450V 27 to 220µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.04CV+100 (µA). Printed with white color letter on dark brown sleeve. After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Measurement frequency : 120Hz The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Rated voltage (V) Impedance ratio (max.) 400 420 450 Measurement frequency : 120Hz at 20°C Rated voltage (V) tan δ (max.) 400 0.15 420 0.20 450 0.20 Shelf Life Capacitance change Leakage current tan δ Within ± 20% of the initial capacitance value Less than or equal to the initial specified value 200% or less than the initial specified value U P H G M 9 1 0 1 1 Capacitance tolerance (±20%) Rated capacitance (220µF) Rated voltage (400V) H D T Size code Series name Type Radial Lead Type Type numbering system (Example : 400V 220µF) Configuration φ D Pb-free leadwire Pb-free PET sleeve PD 12.5 to 18 HD Configuration φD P 5.0 12.5 5.0 7.5 7.5 φd 0.6 0.8 0.8 0.8 (mm) P±0.5 L± 2.0 15min. 4min. φD±0.5max. Pressure relief vent Sleeve (PET) φ d Frequency Coefficient 60Hz 0.80 120Hz 1.00 500Hz 1.25 1kHz 1.40 10kHz or more 1.50 Frequency coefficient of rated ripple current UPH UPZ Smaller Dimension table in next page. Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. ※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V)
ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100L Rated Voltage （V） （code） Rated Capacitance （µF） Case Size φD×L （mm） tan δ Leakage Current （µA） Rated Ripple （mArms） （105℃/120Hz） Part Number at 20℃ after 1 minute ） 400 （2G） 33 10×31.5 0.15 628 330 UPH2G330MPD 56 12.5×31.5 0.15 996 470 UPH2G560MHD 68 12.5×35.5 0.15 1188 540 UPH2G680MHD 82 12.5×40 0.15 1412 620 UPH2G820MHD 100 16×31.5 0.15 1700 710 UPH2G101MHD 120 16×35.5 0.15 2020 800 UPH2G121MHD 150 16×40 0.15 2500 920 UPH2G151MHD 150 18×31.5 0.15 2500 890 UPH2G151MHD6 180 18×40 0.15 2980 1060 UPH2G181MHD 220 18×46 0.15 3620 1200 UPH2G221MHD 420 （W6） 33 10×31.5 0.20 654.4 320 UPHW6330MPD 56 12.5×31.5 0.20 1040.8 460 UPHW6560MHD 100 16×31.5 0.20 1780 690 UPHW6101MHD 120 16×35.5 0.20 2116 780 UPHW6121MHD 120 18×31.5 0.20 2116 800 UPHW6121MHD6 150 18×35.5 0.20 2620 920 UPHW6151MHD 180 18×40 0.20 3124 1040 UPHW6181MHD 450 （2W） 27 10×31.5 0.20 586 300 UPH2W270MPD 47 12.5×31.5 0.20 946 430 UPH2W470MHD 56 12.5×35.5 0.20 1108 490 UPH2W560MHD 68 12.5×40 0.20 1324 560 UPH2W680MHD 82 16×31.5 0.20 1576 640 UPH2W820MHD 100 16×35.5 0.20 1900 730 UPH2W101MHD 120 16×40 0.20 2260 820 UPH2W121MHD 120 18×31.5 0.20 2260 800 UPH2W121MHD6 150 18×40 0.20 2800 970 UPH2W151MHD 180 18×46 0.20 3340 1090 UPH2W181MHD UPH Dimensions For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors.