UPG2156TB

UPG2156TB NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. L-BAND 4 W SINGLE CONTROL HIGH POWER SPDT SWITCH GaAs INTEGRATED CIRCUIT µPG2156TB Document No. PG10588EJ01V0DS (1st edition) Date Published December 2005 CP(K) Printed in Japan  NEC Compound Semiconductor Devices, Ltd. 2005

DESCRIPTION

The µPG2156TB is an L-band single control SPDT GaAs FET s witch which was developed for digital cellular or cordless telephone application. The devic e can operate from 800 MHz to 2.5 GH z, having the low insertion loss and high linearity.

FEATURES

• Low insertion loss : L INS = 0.45 dB TYP. @ Vcont = +2.6 V/0 V, f = 1.0 GHz, IN-OUT1 : L INS = 0.35 dB TYP. @ Vcont = +2.6 V/0 V, f = 1.0 GHz, IN-OUT2 : L INS = 0.45 dB TYP. @ Vcont = +2.6 V/0 V, f = 2.0 GHz, IN-OUT1/2  High power switching : P in (0.1 dB) = 37 dBm TYP. @ Vcont = +2.6 V/0 V, f = 1.0 GHz, IN-OUT1/2  6-pin super minimold package (2.1 × 2.0 × 0.9 mm) APPLICATION  GSM Triple/Quad band digital cellular

ORDERING INFORMATION

Part Number Order Number Package Marking Supplying Form µPG2156TB-E4 µPG2156TB-E4-A 6-pin super minimold (Pb-Free) G4V • Embossed tape 8 mm wide

• Pin 4, 5, 6 face the perforation side of the tape
• Qty 3 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: µPG2156TB

Data Sheet PG10588EJ01V0DS 2 µPG2156TB PIN CONNECTIONS Pin No. Pin Name

1 OUT2

2 GND

3 OUT1

4 V DD

5 IN 4

(Bottom View) (Top View) G4V

6 V cont

ABSOLUTE MAXIMUM RATINGS (TA = +25°C) Parameter Symbol Ratings Unit Supply Voltage V DD +8.0 V Control Voltage V cont +8.0 V Input Power P in +38 dBm Operating Ambient Temperature T A −45 to +85 °C Storage Temperature T stg −55 to +150 °C RECOMMENDED OPERATING RANGE (TA = +25°C) Parameter Symbol MIN. TYP. MAX. Unit Supply Voltage V DD +2.4 +2.6 +5.0 V Control Voltage (High) V cont (H) +2.4 +2.6 +5.0 V Control Voltage (Low) V cont (L) 0 0 +0.2 V

Data Sheet PG10588EJ01V0DS 3 µPG2156TB ELECTRICAL CHARACTERISTICS (T A = +25°C, VDD = +2.6 V, V cont = +2.6 V/0 V, Z O = 50 Ω, off chip DC blocking capacitors value: 56 pF, unless otherwise specified) Parameter Symbol Test Conditions Pass MIN. TYP. MAX. Unit Insertion Loss L INS f = 0.8 to 1.0 GHz IN-OUT1 − 0.45 0.65 dB IN-OUT2 − 0.35 0.55 dB f = 1.0 to 2.0 GHz IN-OUT1/2 − 0.45 0.65 dB f = 2.0 to 2.5 GHz IN-OUT1/2 − 0.50 − dB Isolation ISL f = 0.8 to 1.0 GHz IN-OUT1/2 21.0 23.0 − dB f = 1.0 to 2.0 GHz IN-OUT1/2 15.5 17.5 − dB f = 2.0 to 2.5 GHz IN-OUT1/2 − 16.0 − dB Input Return Loss RL in f = 0.8 to 1.0 GHz IN-OUT1 10 15 − dB IN-OUT2 15 20 − dB f = 1.0 to 2.0 GHz IN-OUT1/2 15 20 − dB f = 2.0 to 2.5 GHz IN-OUT1/2 − 20 − dB Output Return Loss RL out f = 0.8 to 1.0 GHz IN-OUT1 10 15 − dB IN-OUT2 15 20 − dB f = 1.0 to 2.0 GHz IN-OUT1/2 15 20 − dB f = 2.0 to 2.5 GHz IN-OUT1/2 − 20 − dB 0.1 dB Loss Compression P in (0.1 dB) f = 1.0 GHz IN-OUT1/2 35 37 − dBm Input Power f = 2.0 GHz IN-OUT1/2 35 37 − dBm 2nd Harmonics 2f0 f = 1.0 GHz, Pin = +35 dBm IN-OUT1/2 65 75 − dBc f = 2.0 GHz, Pin = +33 dBm IN-OUT1/2 65 70 − dBc 3rd Harmonics 3f0 f = 1.0 GHz, Pin = +35 dBm IN-OUT1/2 65 75 − dBc f = 2.0 GHz, Pin = +33 dBm IN-OUT1/2 65 75 − dBc Switching Speed t sw − 1 5 µs Control Current I cont RF Non − 5 50 µA Supply Current I DD RF Non − 40 200 µA

Data Sheet PG10588EJ01V0DS 4 µPG2156TB EVALUATION CIRCUIT Off chip DC blocking capacitors value C1 = 56 pF, C2 = 1 000 pF (Bypass), using NEC standard evaluation board. OUT1 OUT2 VDD IN Vcont G4V The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. TRUTH TABLE OUT1 GND OUT2 VDD IN Vcont Vcont IN-OUT1 IN-OUT2 High OFF ON Low ON OFF

Data Sheet PG10588EJ01V0DS 5 µPG2156TB PACKAGE DIMENSIONS 6-PIN SUPER MINIMOLD (UNIT: mm) 0.9±0.1 0.7 0 to 0.1 0.15+0.1 –0.05 0.2+0.1 –0.05 2.0±0.2 1.3 0.650.65 1.25±0.1 2.1±0.1 0.1 MIN.

Data Sheet PG10588EJ01V0DS 6 µPG2156TB RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Soldering Conditions Condition Symbol Infrared Reflow Peak temperature (package surface temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Time at temperature of 220°C or higher : 60 seconds or less Preheating time at 120 to 180°C : 120 ±30 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below IR260 Wave Soldering Peak temperature (molten solder temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Preheating temperature (package surface temperature) : 120 °C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below WS260 Partial Heating Peak temperatur e (terminal temperature) : 350 °C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below HS350 Caution Do not use different soldering met hods together (except for partial heating).

Data Sheet PG10588EJ01V0DS 7 µPG2156TB When the product(s) listed in this document is subject to any applicable import or export control laws and regulation of the authority having competent jurisdiction, such product(s) shall not be imported or exported without obtaining the import or export license. M8E 00. 4 - 0110 The information in this document is current as of December, 2005. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product be fore using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).

NEC Compound Semiconductor Devices Hong Kong Limited E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) Hong Kong Head Office Taipei Branch Office Korea Branch Office TEL: +852-3107-7303 TEL: +886-2-8712-0478 FAX: +852-3107-7309 FAX: +886-2-2545-3859 NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0504 NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) Sales Division TEL: +81-44-435-1573 FAX: +81-44-435-1579 For further information, please contact µPG2156TB Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points.  Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal.  Do not burn, destroy, cut, crush, or chemically dissolve the product.  Do not lick the product or in any way allow it to enter the mouth.