UPG2155TB NEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. DATA SHEET Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. L-BAND 4 W HIGH POWER SPDT SWITCH GaAs INTEGRATED CIRCUIT μPG2155TB Document No. PG10583EJ02V0DS (2nd edition) Date Published January 2008 NS Printed in Japan 2005, 2008

DESCRIPTION

The μPG2155TB is an L-band SPDT GaAs FET switch which was developed for digital cellular or cordless telephone application. The device can operate from 500 MHz to 2.5 GHz, hav ing the low insertion loss and high linearity.

FEATURES

  • Low insertion loss : L INS = 0.35 dB TYP. @ Vcont = +2.6 V/0 V, f = 1.0 GHz : L INS = 0.40 dB TYP. @ Vcont = +2.6 V/0 V, f = 2.0 GHz : L INS = 0.45 dB TYP. @ Vcont = +2.6 V/0 V, f = 2.5 GHz  High linearity : 2f0 = 70 dBc TYP. @ V cont = +2.6 V/0 V, f = 0.9 GHz, Pin = +34.5 dBm : 3f0 = 75 dBc TYP. @ V cont = +2.6 V/0 V, f = 0.9 GHz, Pin = +34.5 dBm  6-pin super minimold package (2.1 × 2.0 × 0.9 mm) APPLICATION  GSM Triple/Quad band digital cellular

ORDERING INFORMATION

Part Number Order Number Package Marking Supplying Form μPG2155TB-E4 μPG2155TB-E4-A 6-pin super minimold (Pb-Free) G4R • Embossed tape 8 mm wide

  • Pin 4, 5, 6 face the perforation side of the tape
  • Qty 3 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: μPG2155TB

Data Sheet PG10583EJ02V0DS 2 μPG2155TB PIN CONNECTIONS Pin No. Pin Name

1 RF2

2 GND

3 RF3

4 V cont2

5 RF1 4

(Bottom View) (Top View) G4R

6 V cont1

ABSOLUTE MAXIMUM RATINGS (TA = +25°C) Parameter Symbol Ratings Unit Control Voltage V cont +6.0 V Input Power P in +38 dBm Operating Ambient Temperature T A −45 to +85 °C Storage Temperature T stg −55 to +150 °C RECOMMENDED OPERATING RANGE (TA = +25°C) Parameter Symbol MIN. TYP. MAX. Unit Control Voltage (High) V cont (H) +2.4 +2.6 +5.0 V Control Voltage (Low) V cont (L) −0.2 0 +0.2 V <R>

Data Sheet PG10583EJ02V0DS 3 μPG2155TB ELECTRICAL CHARACTERISTICS (T A = +25°C, Vcont = +2.6 V/0 V, Z O = 50 Ω, off chip DC blocking capacitors value: 56 pF, unless otherwise specified) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit Insertion Loss L INS f = 0.5 to 1.0 GHz − 0.35 0.45 dB f = 1.0 to 2.0 GHz − 0.40 0.50 dB f = 2.0 to 2.5 GHz − 0.45 0.55 dB Isolation ISL f = 0.5 to 1.0 GHz 22 24 − dB f = 1.0 to 2.0 GHz 17 19 − dB f = 2.0 to 2.5 GHz 15 17 − dB Input Return Loss RL in f = 0.5 to 2.5 GHz 15 20 − dB Output Return Loss RL out f = 0.5 to 2.5 GHz 15 20 − dB 0.1 dB Loss Compression P in (0.1 dB) f = 0.9 GHz − 37.5 − dBm Input Power f = 1.8 GHz − 37.5 − dBm 2nd Harmonics 2f0 f = 0.9 GHz, P in = +34.5 dBm 65 70 − dBc f = 1.8 GHz, P in = +31.5 dBm 64 70 − dBc 3rd Harmonics 3f0 f = 0.9 GHz, P in = +34.5 dBm 65 75 − dBc f = 1.8 GHz, P in = +31.5 dBm 64 75 − dBc Switching Speed t sw − 1 5 μs Control Current I cont RF Non − 0.5 5.0 μA <R> <R> <R>

Data Sheet PG10583EJ02V0DS 4 μPG2155TB EVALUATION CIRCUIT Off chip DC blocking capacitors value C1 = 56 pF, C2 = 1 000 pF (Bypass), using NEC standard evaluation board. RF3 RF2 Vcont2 RF1 Vcont1 G4R The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. TRUTH TABLE RF3 GND RF2 Vcont2 RF1 Vcont1 Vcont1 V cont2 RF1-RF2 RF1-RF3 High Low ON OFF Low High OFF ON <R> <R>

Data Sheet PG10583EJ02V0DS 5 μPG2155TB PACKAGE DIMENSIONS 6-PIN SUPER MINIMOLD (UNIT: mm) 0.9±0.1 0.7 0 to 0.1 0.15+0.1 –0.05 0.2+0.1 –0.05 2.0+0.15 –0.20 1.3 0.650.65 1.25±0.1 2.1±0.1 0.1 MIN. <R>

Data Sheet PG10583EJ02V0DS 6 μPG2155TB RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Soldering Conditions Condition Symbol Infrared Reflow Peak temperature (package surface temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Time at temperature of 220°C or higher : 60 seconds or less Preheating time at 120 to 180°C : 120 ±30 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below IR260 Wave Soldering Peak temperature (molten solder temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Preheating temperature (package surface temperature) : 120 °C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below WS260 Partial Heating Peak temperatur e (terminal temperature) : 350 °C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below HS350 Caution Do not use different soldering met hods together (except for partial heating).

Data Sheet PG10583EJ02V0DS 7 μPG2155TB The information in this document is current as of January, 2008. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer- designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) M8E 02. 11-1 (1) (2) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "Standard": "Special": "Specific":

μPG2155TB Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points.  Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal.  Do not burn, destroy, cut, crush, or chemically dissolve the product.  Do not lick the product or in any way allow it to enter the mouth.