UPG2030TK_1 NEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. DATA SHEET Caution Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. L, S-BAND SPDT SWITCH GaAs INTEGRATED CIRCUIT μPG2030TK Document No. PG10409EJ03V0DS (3rd edition) Date Published August 2009 NS Printed in Japan 2003, 2009

DESCRIPTION

The μPG2030TK is a GaAs MMIC for L, S-band SPDT (S ingle Pole Double Throw) switch which were developed for mobile phone and other L, S-band applications. This device can operate 2 cont rol switching by control voltage 2.7 to 5. 3 V, at frequencies from 0.5 to 2.5 GHz, having the low insertion loss and high isolation. This device is housed in a 6-pin lead-less minimold package and is suitable for high-density surface mounting.

FEATURES

  • Switch control voltage : V cont (H) = 2.7 to 5.3 V (2.8 V TYP.) : V cont (L) = −0.2 to +0.2 V (0 V TYP.)  High isolation : ISL1 = 27 dB TYP. @ f = 0.5 to 2.0 GHz, V cont = 2.8 V/0 V : ISL2 = 24 dB TYP. @ f = 2.0 to 2.5 GHz, V cont = 2.8 V/0 V : P in (1 dB) = +30.0 dBm TYP. @ f = 2.0 GHz, Vcont = 2.8 V/0 V (Reference value)  High-density surface mounting : 6-pi n lead-less minimold package (1.5 × 1.1 × 0.55 mm)

APPLICATIONS

 PCS, W-LAN, WLL and Bluetooth TM etc.

ORDERING INFORMATION

Part Number Order Number Package Marking Supplying Form μPG2030TK-E2 μPG2030TK-E2-A 6-pin lead-less minimold (1511 PKG) (Pb-free) G3R • Embossed tape 8 mm wide

  • Pin 1, 6 face the perforation side of the tape
  • Qty 5 kpcs/reel Remark To order evaluation samples, pleas e contact your nearby sales office. Part number for sample order: μPG2030TK <R> <R> <R>

Data Sheet PG10409EJ03V0DS 2 μPG2030TK PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM Pin No. Pin Name

1 OUTPUT1

2 GND

3 OUTPUT2

4 V cont2

5 INPUT

(Top View) G3R (Bottom View) (Top View) OUTPUT1 GND OUTPUT2 Vcont1 Vcont2 INPUT

6 V cont1

Vcont1 V cont2 INPUT −OUTPUT1 INPUT −OUTPUT2 Low High ON OFF High Low OFF ON ABSOLUTE MAXIMUM RATINGS (TA = +25°C, unless otherwise specified) Parameter Symbol Ratings Unit Switch Control Voltage V cont 6.0 Note V Input Power P in +33 dBm Operating Ambient Temperature T A −45 to +85 °C Storage Temperature T stg −55 to +150 °C Note ⎪Vcont1 − Vcont2⎪ ≤ 6.0 V RECOMMENDED OPERATING RANGE (TA = +25°C, unless otherwise specified) Parameter Symbol MIN. TYP. MAX. Unit Switch Control Voltage (H) V cont (H) 2.7 2.8 5.3 V Switch Control Voltage (L) V cont (L) −0.2 0 0.2 V <R> <R> <R> <R>

Data Sheet PG10409EJ03V0DS 3 μPG2030TK

ELECTRICAL CHARACTERISTICS

(TA = +25°C, Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF, unless otherwise specified) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit Insertion Loss 1 L INS1 f = 0.5 to 1.0 GHz − 0.25 0.45 dB Insertion Loss 2 L INS2 f = 1.0 to 2.0 GHz − 0.30 0.50 dB Insertion Loss 3 L INS3 f = 2.0 to 2.5 GHz − 0.35 0.55 dB Isolation 1 ISL1 f = 0.5 to 2.0 GHz 23 27 − dB Isolation 2 ISL2 f = 2.0 to 2.5 GHz 20 24 − dB Input Return Loss RL in f = 0.5 to 2.5 GHz 15 20 − dB Output Return Loss RL out f = 0.5 to 2.5 GHz 15 20 − dB Input Power Note f = 2.5 GHz +25.5 +27.0 − dBm Switch Control Current I cont No signal − 4 20 μA Switch Control Speed t SW − 50 500 ns Note P in (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear range. STANDARD CHARACTERISTICS FOR REFERENCE (TA = +25°C, Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF, unless otherwise specified) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit 1 dB Gain Compression Input Power Note Pin (1 dB) f = 2.0 GHz − +30.0 − dBm Note P in (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear range. Caution This device is used it is necessary to use DC cut capacitors. The value of DC cut capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and the condition with actual board of your system. The range of recommended DC cut capacitor value is less than 100 pF.

Data Sheet PG10409EJ03V0DS 4 μPG2030TK EVALUATION CIRCUIT (Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF) Vcont1 Vcont2 OUTPUT1 OUTPUT2 INPUT 56 pF 56 pF56 pF 1 000 pF1 000 pF 456 321 The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.

Data Sheet PG10409EJ03V0DS 5 μPG2030TK ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD 6pin L2MM SPDT SW Vc1 Vc2 IN OUT 1 OUT 2 Vcont2 OUTPUT2 INPUT OUTPUT1 Vcont1 G3R USING THE NEC EVALUATION BOARD Symbol Values C1, C2, C3 56 pF C4, C5 1 000 pF

Data Sheet PG10409EJ03V0DS 6 μPG2030TK TYPICAL CHARACTERISTICS (TA = +25°C, Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF, unless otherwise specified) 0.5 0.4 0.2 0.3 0.1 –0.1 –0.2 –0.3 –0.4 –0.5 Insersion Loss LINS (dB) Frequency f (GHz) INPUT–OUTPUT1 INSERSION LOSS vs. FREQUENCY 0.5 0.4 0.2 0.3 0.1 –0.1 –0.2 –0.3 –0.4 –0.5 Insersion Loss LINS (dB) Frequency f (GHz) INPUT–OUTPUT2 INSERSION LOSS vs. FREQUENCY –10 –30 –20 –40 –50 Isolation ISL (dB) Frequency f (GHz) INPUT–OUTPUT1 ISOLATION vs. FREQUENCY –10 –30 –20 –40 –50 Input Return Loss RLin (dB) Frequency f (GHz) INPUT–OUTPUT1 INPUT RETURN LOSS vs. FREQUENCY –10 –30 –20 –40 –50 Isolation ISL (dB) Frequency f (GHz) INPUT–OUTPUT2 ISOLATION vs. FREQUENCY –10 –30 –20 –40 –50 Input Return Loss RLin (dB) Frequency f (GHz) INPUT–OUTPUT2 INPUT RETURN LOSS vs. FREQUENCY Remark The graphs indicate nominal characteristics.

Data Sheet PG10409EJ03V0DS 7 μPG2030TK –10 –30 –20 –40 –50 Output Return Loss RLout (dB) Frequency f (GHz) INPUT–OUTPUT1 OUTPUT RETURN LOSS vs. FREQUENCY –10 –30 –20 –40 –50 Output Return Loss RLout (dB) Frequency f (GHz) INPUT–OUTPUT2 OUTPUT RETURN LOSS vs. FREQUENCY 10 15 20 25 30 35 40 Output Power Pout (dBm) Input Power Pin (dBm) OUTPUT POWER vs. INPUT POWER f = 1.0 GHz 10 15 20 25 30 35 40 Output Power Pout (dBm) Input Power Pin (dBm) OUTPUT POWER vs. INPUT POWER f = 2.5 GHz Remark The graphs indicate nominal characteristics.

Data Sheet PG10409EJ03V0DS 8 μPG2030TK PACKAGE DIMENSIONS 6-PIN LEAD-LESS MINIMOLD (1511 PKG) (UNIT: mm) 0.48±0.050.48±0.05 1.5±0.1 1.3±0.05 1.1±0.1 0.55±0.03 0.11+0.1 –0.05 0.16±0.05 0.9±0.10.2±0.1 ab c (Bottom View)(Top View) Remark Dimension is bigger than dimension (dimension = a + b + c). <R>

Data Sheet PG10409EJ03V0DS 9 μPG2030TK RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Soldering Conditions Condition Symbol Infrared Reflow Peak temperature (package surface temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Time at temperature of 220°C or higher : 60 seconds or less Preheating time at 120 to 180°C : 120 ±30 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below IR260 Wave Soldering Peak temperature (molten solder temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Preheating temperature (package surface temperature) : 120 °C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below WS260 Partial Heating Peak temperature (pin temperature) : 350 °C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below HS350 Caution Do not use different soldering met hods together (except for partial heating). <R>

Data Sheet PG10409EJ03V0DS 10 μPG2030TK Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A. The information in this document is current as of August, 2009. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC Electronics products are not taken measures to prevent radioactive rays in the product design. When customers use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of NEC Electronics products. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer- designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) M8E0904E (1) (2) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "Standard": "Special": "Specific":

μPG2030TK Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points.  Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal.  Do not burn, destroy, cut, crush, or chemically dissolve the product.  Do not lick the product or in any way allow it to enter the mouth.