UPG153TB_01 NEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

PART NUMBER UPG153TB UPG155TB PACKAGE OUTLINE S06 S06 SYMBOLS PARAMETERS AND CONDITIONS UNITS MIN TYP MAX MIN TYP MAX f = 2 GHz dB 0.7 0.9 0.75 1.0 f = 2.5 GHz dB 0.9 0.9 I SOL Isolation at f = 0.1 to 2 GHz dB 10 13 13 16 f = 2.5 GHz dB 10 10 f = 1 GHz dB 15 18.5 18 21.5 RLIN Input Return Loss at f = 0.1 to 2 GHz dB 11 15 11 15 RLOUT Input Return Loss at f = 0.1 to 2 GHz dB 11 15 11 15 PIN(0.1 dB) Input Power at 0.1 dB Compression Point, f = 2 GHz dBm 29 30.5 PIN(1 dB) Input Power at 1 dB Compression Point, f = 2 GHz dBm 31 33 32 34 tsw Switching Speed ns 30 30 ICONT Control Current at VCONT = 3 V/0 V, no RF signal µA2 0 5 0 2 05 0

  • LOW INSERTION LOSS: LINS = 0.5 dB TYP (UPG153TB), 0.6 dB TYP (UPG155TB) at VCONT = +3.0 V/0 V, f = 1 GHz
  • HIGH LINEARITY SWITCHING: Pin (0.1 dB) = +29.0 dBm TYP (UPG153TB) Pin (0.1 dB) = +30.5 dBm TYP (UPG155TB) at V CONT = +3.0 V/0 V, f = 2 GHz
  • SMALL 6 PIN MINI-MOLD PACKAGE: Size: 2.0 x 1.25 x 0.9 mm

FEATURES

L, S Band SPDT GaAs MMIC Switch

ELECTRICAL CHARACTERISTICS

(Unless otherwise specified, TA = 25°C, VCONT1 = 3 V, VCONT2 = 0 V or VCONT1 = 0 V, VCONT2 = 3 V; off chip DC blocking capacitor value, 51 pF)

DESCRIPTION

The UPG153TB and UPG155TB are L-band SPDT (Single Pole Double Throw) GaAs FET switches for digital cellular or cordless telephone application. The devices can operate from 100 MHz to 2.5 GHz with low insertion loss. These devices are housed in an original 6 pin super mini-mold package similar to SOT363. NEC's stringent quality assurance and test procedures assure the highest reliability and performance. Note: 1. It is necessary to use DC blocking capacitors for the RF input and RF output. The value of DC blocking capacitors should be chosen to accommodate the frequency of operation. The range of recommended DC blocking capacitor value is less than 100 pF. 2. The distance between IC's GND pin and ground pattern of substrate should be as short as possible to avoid parasitics. PRELIMINARY DATA SHEET APPLICATION

  • L, S-BAND DIGITAL CELLULAR OR CORDLESS TELEPHONE
  • PCS, WLAN AND WLL APPLICATIONS California Eastern Laboratories

UPG153TB, UPG155TB SYMBOLS PARAMETERS UNITS RATINGS VCONT1, 2 Control Voltage 1, 2 2 V -6 to +6 PIN Input Power UPG155TB dBm +34 UPG153TB +33 PTOT Total Power Dissipation3 W 0.15 TA Operating Temperature °C -45 to +85 TSTG Storage Temperature °C -55 to +150 ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) Notes: 1. Operation in excess of any one of these conditions may result in permanent damage. 2. 2.5 V ≤ I VCONT1 - VCONT2 I ≤ 6 V 3. Mounted on a 50 x 50 x 1.6 mm double copper clad epoxy glass PWB, TA = +85 °C. RECOMMENDED OPERATING CONDITIONS (TA = 25°C) UPG153TB UPG155TB SYMBOLS PARAMETERS UNITS MIN TYP MAX MIN TYP MAX VCONT Control Voltage (High) V +2.5 +3 +5.3 +2.7 +3 +5.3 VCONT Control Voltage (Low) V -0.2 0 +0.2 -0.2 0 +0.2 TEST CIRCUIT1 Note: 1. (TA = 25°C, VCONT1 = +3 V, VCONT2 = 0 V, VCONT1 = 0 V, VCONT2 = +3 V, f = 2 GHz; off chip DC blocking capacitors value: C0 = 51 pF, C1 = 1000 pF (Bypass)) 123 654 G1J OUT1 C1 C1 OUT2 VCONT1 VCONT2IN

(Top View) (Bottom View) G1J (Top View) (Bottom View) G1L PIN NO. CONNECTION

1 OUT1

2 GND

3 OUT2

UPG153TB, UPG155TB TRUTH TABLE OF SWITCHING BY CONDITION OF CONTROL VOLTAGE VCONT1 VCONT(H) VCONT(L) VCONT2 VCONT(H) IN OUT1 OUT2 VCONT(L) IN OUT1 OUT2 Note 1 IN OUT1 OUT2 IN OUT1 OUT2 Note 1 Note: 1. In case of VCONT1 = VCONT2 = High or VCONT1 = VCONT2 = Low (that is same control voltage for both pins), input signal (Pin 5) is output to OUT1 (Pin 1) and OUT2 (Pin 3). UPG153TB UPG155TB

UPG153TB, UPG155TB EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 Internet: http://WWW.CEL.COM 12/5/2001 DATA SUBJECT TO CHANGE WITHOUT NOTICE OUTLINE DIMENSIONS (Units in mm) PACKAGE OUTLINE S06 2.1 ± 0.1 1.25 ± 0.1 0 ~ 0.1 0.15 0.9 ± 0.1 0.7 2.0 ± 0.2 0.65 1.3 0.2 (All Leads) +0.10 - 0.05 Note: All dimensions are typical unless otherwise specified. PART NUMBER QUANTITY UPG153TB-E3 3 kpcs/Reel UPG155TB-E3 3 kpcs/Reel

ORDERING INFORMATION

Note: Embossed Tape, 8 mm wide, Pins 1, 2, 3 face tape perforation side. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.