UPC8128TA RENESAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 54
Technical content
To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.
- All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipmen t; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
Caution Electro-static sensitive devices The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. BIPOLAR ANALOG INTEGRATED CIRCUITS µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA SILICON MMIC LOW CURRENT AMPLIFIERS FOR CELLULAR/CORDLESS TELEPHONES Document No. P14637EJ2V0DS00 (2nd edition) Date Published August 2000 N CP(K) Printed in Japan DATA SHEET 2000© The mark shows major revised points.
DESCRIPTION
The µPC8128TA, µPC8151TA and µPC8152TA are silicon monolithic integrated circuits designed as buffer amplifiers for cellular / cordless telephones. These amplifiers can realize low current consumption with external chip inductor (example: 1005 size) which can not be realized on internal 50 Ω wideband matched IC. These low current amplifiers operate on 3.0 V. These ICs are manufactured using NEC’s 20 GHz fT NESAT™ III silicon bipolar process. This process uses silicon nitride passivation film and gold electrodes. These materials can protect chip surface from external pollution and prevent corrosion/migration. Thus, these ICs have excellent performance, uniformity and reliability.
FEATURES
- Low current consumption : µPC8128TA ; I CC = 2.8 mA TYP. @ VCC = 3.0 V µPC8151TA ; I CC = 4.2 mA TYP. @ VCC = 3.0 V µPC8152TA ; I CC = 5.6 mA TYP. @ VCC = 3.0 V
- Supply voltage : V CC = 2.4 to 3.3 V
- High efficiency : µPC8128TA ; P O (1 dB) = −4.0 dBm TYP. @ f = 1 GHz µPC8151TA ; P O (1 dB) = +2.5 dBm TYP. @ f = 1 GHz µPC8152TA ; P O (1 dB) = −4.5 dBm TYP. @ f = 1 GHz
- Power gain variation : µPC8128TA, 8151TA ; GP = 12.5 dB TYP. @ f = 1 GHz µPC8152TA ; G P = 23.0 dB TYP. @ f = 1 GHz
- Operating frequency : 100 to 1 900 MHz (Output port LC matching)
- Excellent isolation : µPC8128TA ; ISL = 39 dB TYP. @ f = 1 GHz : µPC8151TA ; ISL = 38 dB TYP. @ f = 1 GHz : µPC8152TA ; ISL = 40 dB TYP. @ f = 1 GHz APPLICATION
- Buffer Amplifiers on 800 to 1 900 MHz cellular / cordless telephones Discontinued Product
Data Sheet P14637EJ2V0DS002 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA
ORDERING INFORMATION
Part Number Package Marking Feature Supplying Form µPC8128TA-E3 C2P 2.8 mA Low I CC µPC8151TA-E3 C2U 4 mA High P O µPC8152TA-E3 6-pin minimold C2V 5 mA High G P Embossed tape 8 mm wide. 1, 2, 3 pins face the perforation side of the tape. Qty 3 kpcs/reel. Remark To order evaluation samples, please contact your local NEC sales office. (Part number for sample order: µPC8128TA, µPC8151TA, µPC8152TA) PIN CONNECTIONS Pin No. Pin Name
1 INPUT
(Top View) Marking is an example of PC8128TAµ (Bottom View) Discontinued Product
Data Sheet P14637EJ2V0DS00 3 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA PRODUCT LINE-UP (TA = +25 °C, VCC = Vout = 3.0 V, ZS = ZL = 50 ΩΩΩΩ ) Parameter 1.00 GHz output port matching frequency
1.66 GHz output port
1.90 GHz output port
Part No. ICC (mA) G P (dB) ISL (dB) PO (1 dB) (dB) G P (dB) ISL (dB) PO (1 dB) (dB) G P (dB) ISL (dB) PO (1 dB) (dB) µPC8128TB 6-pin super minimold µPC8151TB 6-pin super minimold µPC8152TB 6-pin super minimold Remark Typical performance. Please refer to ELECTRICAL CHARACTERISTICS in detail. SYSTEM APPLICATION EXAMPLE Location examples in digital cellular RX Low Noise Tr. SW TX ÷N PLL PLL I Q I Q DEMOD. 90°PA φ These ICs can be added to your system around V parts, when you need more isolation or gain. The application herein, however, shows only examples, therefore the application can depend on your kit evaluation. Discontinued Product
Data Sheet P14637EJ2V0DS004 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA PIN EXPLANATION Pin No. Pin Name Applied Voltage (V) Pin Voltage (V) Note Function and Applications Internal Equivalent Circuit 1 INPUT − 0.90 1.06 0.80 Signal input pin. A internal matching circuit, configured with resistors, enables 50 Ω connec- tion over a wide band. This pin must be coupled to signal source with capacitor for DC cut. GND 0 − Ground pin. This pin should be connected to system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. All the ground pins must be con- nected together with wide ground pattern to decrease impedance defference.
4 OUTPUT voltage
− Signal output pin. This pin is de- signed as collector output. Due to the high impedance output, this pin should be externally equipped with LC matching circuit to next stage. For L, a size 1005 chip in-ductor can be chosen. 6V CC 2.4 to 3.3 − Power supply pin. This pin should be externally equipped with bypass capacitor to minimize its inpedance. 23 5 PC8152TA 2 5 3 PC8128TA, PC8151TAµµ µ Note Pin voltage is measured at VCC = 3.0 V. Above: µPC8128TA, Center: µPC8151TA, Below: µPC8152TA Discontinued Product
Data Sheet P14637EJ2V0DS00 5 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA ABSOLUTE MAXIMUM RATINGS Parameter Symbol Conditions Ratings Unit Supply Voltage V CC TA = +25°C, Pin 4, Pin 6 3.6 V Total Circuit Current I CC TA = +25°C 15 mA Total Power Dissipation P D Mounted on double sided copper clad 50 × 50 × 1.6 mm epoxy glass PWB (TA = +85°C) 280 mW Operating Ambient Temperature TA −40 to +85 °C Storage Temperature T stg −55 to +150 °C Input Power P in TA = +25°C +5 dBm RECOMMENDED OPERATING CONDITIONS Parameter Symbol MIN. TYP. MAX. Unit Remarks Supply Voltage V CC 2.4 3.0 3.3 V The same voltage should be applied to pin 4 and pin 6. Operating Ambient Temperature TA −40 +25 +85 °C Operating Frequency f 0.1 − 1.9 GHz Matched output port with external LC Discontinued Product
Data Sheet P14637EJ2V0DS006 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA ELECTRICAL CHARACTERISTICS (Unless otherwise specified, TA = +25°C, VCC = Vout = 3.0 V, ZS = ZL = 50 ΩΩΩΩ , at LC matched frequency) µPC8128TA µPC8151TA µPC8152TA Parameter Symbol Conditions Unit Power Gain G P f = 1.00 GHz f = 1.66 GHz f = 1.90 GHz 9.5 12.5 14.5 9.5 12.5 14.5 16.5 14.5 19.5 17.5 21.5 19.5 dB Isolation ISL f = 1.00 GHz f = 1.66 GHz f = 1.90 GHz dB Gain 1 dB Compression Output Power P O (1 dB) f = 1.00 GHz f = 1.66 GHz f = 1.90 GHz −7.5 −8.5 −8.5 −4.0 −4.0 −4.0 −1.0 −2.5 −3.0 +2.5 +1.5 +0.5 −7.5 −11.5 −11.5 −4.5 −8.5 −8.5 dBm Saturated Output Power Note (Pin = −6 dBm) PO (sat) f = 1.00 GHz f = 1.66 GHz f = 1.90 GHz −2.5 −5.5 −6.0 +0.5 −2.5 −3.0 dBm Noise Figure NF f = 1.00 GHz f = 1.66 GHz f = 1.90 GHz 6.0 6.0 6.0 7.5 7.5 7.5 6.0 6.0 6.0 7.5 7.5 7.5 3.5 4.0 4.5 5.0 5.5 6.0 dB Input Return Loss (Without matching circuit) RL in f = 1.00 GHz f = 1.66 GHz f = 1.90 GHz 2.5 5.5 8.5 7.5 8.5 11.5 10.5 11.5 dB Note Saturated output power is specified only in µPC8152TA which has flat saturated region. STANDARD CHARACTERISTICS (Unless otherwise specified, TA = +25°C, VCC = Vout = 3.0 V, ZS = ZL = 50 ΩΩΩΩ , at LC matched frequency) Reference Value Parameter Symbol Conditions µPC8128TA µPC8151TA µPC8152TA Unit Output Return Loss (With external matching circuit) RL out f = 1.00 GHz f = 1.66 GHz f = 1.90 GHz 7.5 dB 3rd Order Intermodulation Distortion (PO (each) = −20 dBm) IM3 f1 = 1.000 GHz, f2 = 1.001 GHz f1 = 1.660 GHz, f2 = 1.661 GHz f1 = 1.900 GHz, f2 = 1.901 GHz −50 −46 −46 −62 −56 −54 −51 −43 −42 dBc Discontinued Product
Data Sheet P14637EJ2V0DS00 7 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA TEST CIRCUIT IN OUT 50 Ω 2,3,5 150 Ω C 1 C 2 C 3 VCC C 4 Output port matching circuit C 5 C 6C 7 Discontinued Product
Data Sheet P14637EJ2V0DS008 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD µµµµPC8128TA/ µµµµPC8151TA OUT IN PC8128/ 51/52TA Top View Mounting direction connector connector (Marking is an example for PC8128TA)µ µ C2P C1 COMPONENT LIST 1.00 GHz output port matching 1.66 GHz output port matching 1.90 GHz output port matching C1, C3 to C6 1 000 pF 1 000 pF 1 000 pF C2 1.0 pF 0.75 pF 0.75 pF L1 8.2 nH 3.3 nH 2.7 nH Discontinued Product
Data Sheet P14637EJ2V0DS00 9 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA µµµµPC8152TA C2V Top View Mounting direction OUT IN PC8128/ 51/52TA µ connector connector COMPONENT LIST 1.00 GHz output port matching 1.66 GHz output port matching 1.90 GHz output port matching C1, C3 to C7 1 000 pF 1 000 pF 1 000 pF C2 1.5 pF 1.0 pF 1.5 pF L1 8.2 nH 2.7 nH 1.8 nH NOTES ( µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA in common) 1. 42 × 35 × 0.4 mm double sided copper clad polyimide board. 2. Back side: GND pattern 3. Solder plated on pattern 4. : Through holes Discontinued Product
Data Sheet P14637EJ2V0DS0010 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA EXAMPLE OF APPLICATION CIRCUIT (µµµµPC8128TA, µµµµPC8151TA) In improving RLin of µPC8128TA and µPC8151TA at 1.00 GHz, L2 should be attached. IN OUT 50 Ω 2,3,5 150 Ω C 1 L2 C 2 C 3 VCC Output port maching circuit In improving RLin of µPC8128TA and µPC8151TA at 1.66 to 1.90 GHz, C’ should be attached. IN OUT 50 Ω 2,3,5 150 Ω C 1 C 2 C 3 VCC Output port matching circuit Discontinued Product
Data Sheet P14637EJ2V0DS00 11 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = +25°°°°C) − µPC8128TA − 0 01234 Circuit Current ICC (mA) Supply Voltage VCC (V) –60 –40 –20 +20 +40 +60 +80 +1000 Circuit Current ICC (mA) Operating Ambient Temperature TA (°C) CIRCUIT CURRENT vs. SUPPLY VOLTAGE CIRCUIT CURRENT vs. OPERATING AMBIENT TEMPERATURE VCC = 3.0 VNo signal Discontinued Product
Data Sheet P14637EJ2V0DS0012 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8128TA −
1.00 GHz OUTPUT PORT MATCHING
S-PARAMETERS (monitored at connector on board) TA = +25°C, VCC = Vout = 3.0 V S11 REF 1.0 Units 1 200.0 mUnits/ 45.664 Ω –69.156 Ω MARKER 1
1.0 GHz
START 0.100000000 GHz STOP 3.100000000 GHz S22 REF 1.0 Units 1 200.0 mUnits/ 30.865 Ω 11.494 Ω MARKER 1 START 0.100000000 GHz STOP 3.100000000 GHz Discontinued Product
Data Sheet P14637EJ2V0DS00 13 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8128TA − –40 –30 –20 –10 +10 +20 –50 0.1 0.3 1.0 3.0 Insertion Power Gain GP (dB) Frequency f (GHz) INSERTION POWER GAIN vs. FREQUENCY INSERTION POWER GAIN vs. FREQUENCY –40 –30 –20 –10 +10 +20 –50 0.1 0.3 1.0 3.0 Insertion Power Gain GP (dB) Frequency f (GHz) –60 –50 –40 –30 –70 0.1 0.3 1.0 3.0 Isolation ISL (dB) Frequency f (GHz) ISOLATION vs.FREQUENCY –60 –50 –40 –30 –70 0.1 0.3 1.0 3.0 Isolation ISL (dB) Frequency f (GHz) ISOLATION vs. FREQUENCY –15 –10 –20 0.1 0.3 1.0 3.0 Input Return Loss RLin (dB) Frequency f (GHz) INPUT RETURN LOSS vs.FREQUENCY –15 –10 –20 0.1 0.3 1.0 3.0 Input Return Loss RLin (dB) Frequency f (GHz) INPUT RETURN LOSS vs. FREQUENCY VCC = 3.0 V VCC = 3.0 V VCC = 3.0 V VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V TA = +85°C TA = +25°C TA = –40°C VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V TA = +85°C TA = +25°C TA = –40°C VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V TA = +85°C TA = +25°C TA = –40°C Discontinued Product
Data Sheet P14637EJ2V0DS0014 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8128TA − OUTPUT RETURN LOSS vs. FREQUENCY VCC = 3.0 V OUTPUT POWER vs. INPUT POWER VCC = 3.0 V –20 –10 +10 –30 0.1 0.3 1.0 3.0 Output Return Loss RLout (dB) Frequency f (GHz) VCC = 3.3 V VCC = 3.0 V VCC = 3.3 V VCC = 3.0 V TA = +85°C TA = +25°C TA = –40°C TA = +85°C TA = –40°C VCC = 2.4 V VCC = 2.4 V OUTPUT RETURN LOSS vs. FREQUENCY –20 –10 +10 –30 0.30.1 1.0 3.0 Output Return Loss RLout (dB) Frequency f (GHz) –20 –25 –10 –15 +10 –30 Output Power Pout (dBm) Input Power Pin (dBm) OUTPUT POWER OF EACH TONE, IM 3 vs. INPUT POWER OF EACH TONE –60 –70 –40 –50 –30 –20 –10 +20 +10 –80 Output Power of Each Tone PO(each) (dBm) 3rd Order Intermodulation Distortion IM3 (dBm) –40 Pout IM3 VCC = 3.0 V f1 = 1.000 GHz f2 = 1.001 GHz –5 0 +5 Input Power of Each Tone Pin(each) (dBm) OUTPUT POWER vs. INPUT POWER –20 –25 –10 –15 +10 –30 Output Power Pout (dBm) Input Power Pin (dBm) TA = +25°C 3rd Order Intermodulation Distortion IM3 (dBc) Output Power of Each Tone PO(each) (dBm) 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE f1 = 1.000 GHz f2 = 1.001 GHz VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V Discontinued Product
Data Sheet P14637EJ2V0DS00 15 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8128TA − 4.5 6.5 5.5 2 2.5 3 3.5 Noise Figure NF (dB) Supply Voltage VCC (V) NOISE FIGURE vs. SUPPLY VOLTAGE Discontinued Product
Data Sheet P14637EJ2V0DS0016 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8128TA −
1.66 GHz OUTPUT PORT MATCHING
S-PARAMETERS (monitored at connector on board) TA = +25°C, VCC = Vout = 3.0 V S11 REF 1.0 Units 1 200.0 mUnits/ 27.846 Ω –43.406 Ω MARKER 1
1.66 GHz
START 0.100000000 GHz STOP 3.100000000 GHz S22 REF 1.0 Units 1 200.0 mUnits/ 46.598 Ω –9.8574 Ω MARKER 1 START 0.100000000 GHz STOP 3.100000000 GHz Discontinued Product
Data Sheet P14637EJ2V0DS00 17 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8128TA − INSERTION POWER GAIN vs. FREQUENCY INPUT RETURN LOSS vs. FREQUENCY –40 –30 –20 –10 +20 +10 –60 –50 0.1 0.3 1.0 3.0 Insertion Power Gain GP (dB) Frequency f (GHz) ISOLATION vs. FREQUENCY –60 –50 –40 –30 –70 0.30.1 1.0 3.0 Isolation ISL (dB) Frequency f (GHz) OUTPUT POWER OF EACH TONE, IM 3 vs. INPUT POWER OF EACH TONE –60 –70 –40 –50 –30 –20 –10 +20 +10 –80 Output Power of Each Tone PO(each) (dBm) 3rd Order Intermodulation Distortion IM3 (dBm) –40 Pout IM3 Input Power of Each Tone Pin(each) (dBm) OUTPUT RETURN LOSS vs. FREQUENCY –20 –25 –10 –15 0 +10 –30 Output Return Loss RLout (dB) VCC = 2.4 V VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V VCC = 3.0 V VCC = 3.3 V VCC = 2.4 V VCC = 3.0 V VCC = 3.3 V VCC = 3.0 V f1 = 1.660 GHz f2 = 1.661 GHz OUTPUT POWER vs. INPUT POWER –20 –10 –15 +10 –30 –25 Output Power Pout (dBm) Input Power Pin (dBm) –15 –20 Input Return Loss RLin (dB) 0.1 0.3 1.0 3.0 Frequency f (GHz) VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V 0.1 0.3 1.0 3.0 Frequency f (GHz) VCC = 2.4 V VCC = 3.3 VVCC = 3.0 V Discontinued Product
Data Sheet P14637EJ2V0DS0018 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8128TA − 3rd Order Intermodulation Distortion IM3 (dBc) Output Power of Each Tone PO(each) (dBm) 6.5 5.5 4.5 2 2.5 3 3.5 Noise Figure NF (dB) Supply Voltage VCC (V) 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE NOISE FIGURE vs. SUPPLY VOLTAGE f1 = 1.660 GHz f2 = 1.661 GHz VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V Discontinued Product
Data Sheet P14637EJ2V0DS00 19 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8128TA −
1.90 GHz OUTPUT PORT MATCHING
S-PARAMETERS (monitored at connector on board) TA = +25°C, VCC = Vout = 3.0 V S11 REF 1.0 Units 1 200.0 mUnits/ 24.725 Ω –34.01 Ω MARKER 1
1.9 GHz
START 0.100000000 GHz STOP 3.100000000 GHz S22 REF 1.0 Units 1 200.0 mUnits/ 74.719 Ω –22.016 Ω MARKER 1 START 0.100000000 GHz STOP 3.100000000 GHz Discontinued Product
Data Sheet P14637EJ2V0DS0020 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8128TA − INSERTION POWER GAIN vs. FREQUENCY INPUT RETURN LOSS vs. FREQUENCY –40 –30 –20 –10 +20 +10 –60 –50 0.1 0.3 1.0 3.0 Insertion Power Gain GP (dB) Frequency f (GHz) ISOLATION vs. FREQUENCY –60 –50 –40 –30 –70 0.30.1 1.0 3.0 Isolation ISL (dB) Frequency f (GHz) OUTPUT POWER OF EACH TONE, IM 3 vs. INPUT POWER OF EACH TONE –60 –70 –40 –50 –30 –20 –10 +20 +10 –80 Output Power of Each Tone PO(each) (dBm) 3rd Order Intermodulation Distortion IM3 (dBm) –40 Pout IM3 Input Power of Each Tone Pin(each) (dBm) OUTPUT RETURN LOSS vs. FREQUENCY –20 –25 –10 –15 0 +10 –30 Output Return Loss RLout (dB) OUTPUT POWER vs. INPUT POWER –20 –10 –15 +15 +10 –25 Output Power Pout (dBm) Input Power Pin (dBm) –15 –10 –20 Input Return Loss RLin (dB) 0.1 0.3 1.0 3.0 Frequency f (GHz) 0.1 0.3 1.0 3.0 Frequency f (GHz) VCC = 3.0 V f1 = 1.900 GHz f2 = 1.901 GHz VCC = 2.4 V VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V VCC = 3.3 VVCC = 3.0 V VCC = 2.4 V VCC = 3.0 V VCC = 3.3 V VCC = 2.4 V VCC = 3.0 V VCC = 3.3 V VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V Discontinued Product
Data Sheet P14637EJ2V0DS00 21 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8128TA − 3rd Order Intermodulation Distortion IM3 (dBc) Output Power of Each Tone PO(each) (dBm) 6.5 5.5 4.5 2 2.5 3 3.5 Noise Figure NF (dB) Supply Voltage VCC (V) 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE NOISE FIGURE vs. SUPPLY VOLTAGE f1 = 1.900 GHz f2 = 1.901 GHz VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V Discontinued Product
Data Sheet P14637EJ2V0DS0022 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA S-PARAMETERS (VCC = Vout = 3.0 V) − µPC8128TA − S11-FREQUENCY 1.0 G2.0 G 3.0 G 0.1 G S22-FREQUENCY 1.0 G 2.0 G 3.0 G 0.1 G Discontinued Product
Data Sheet P14637EJ2V0DS00 23 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA TYPICAL S-PARAMETER VALUES (TA = +25°C) µPC8128TA VCC = Vout = 3.0 V, ICC = 2.8 mA FREQUENCY S 11 S21 S12 S22 Discontinued Product
Data Sheet P14637EJ2V0DS0024 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8151TA − 0 01234 Circuit Current ICC (mA) Supply Voltage VCC (V) –60 –40 –20 +20 +40 +60 +80 +1000 Circuit Current ICC (mA) Operating Ambient Temperature TA (°C) CIRCUIT CURRENT vs. SUPPLY VOLTAGE CIRCUIT CURRENT vs. OPERATING AMBIENT TEMPERATURE VCC = 3.0 VNo signal Discontinued Product
Data Sheet P14637EJ2V0DS00 25 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8151TA − S-PARAMETERS (monitored at connector on board) TA = +25°C, VCC = Vout = 3.0 V S11 REF 1.0 Units 1 200.0 mUnits/ 52.156 Ω –69.48 Ω MARKER 1 START 0.100000000 GHz STOP 3.100000000 GHz S22 REF 1.0 Units 1 200.0 mUnits/ 32.893 Ω 16.221 Ω MARKER 1 START 0.100000000 GHz STOP 3.100000000 GHz Discontinued Product
Data Sheet P14637EJ2V0DS0026 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8151TA − –40 –30 –20 –10 +10 +20 –50 0.1 0.3 1.0 3.0 Insertion Power Gain GP (dB) Frequency f (GHz) INSERTION POWER GAIN vs. FREQUENCY INSERTION POWER GAIN vs. FREQUENCY –40 –30 –20 –10 +10 +20 –50 0.1 0.3 1.0 3.0 Insertion Power Gain GP (dB) Frequency f (GHz) –60 –50 –40 –30 –70 0.1 0.3 1.0 3.0 Isolation ISL (dB) Frequency f (GHz) ISOLATION vs. FREQUENCY –60 –50 –40 –30 –70 0.1 0.3 1.0 3.0 Isolation ISL (dB) Frequency f (GHz) ISOLATION vs. FREQUENCY –15 –10 –20 0.1 0.3 1.0 3.0 Input Return Loss RLin (dB) Frequency f (GHz) INPUT RETURN LOSS vs. FREQUENCY –15 –10 –20 0.1 0.3 1.0 3.0 Input Return Loss RLin (dB) Frequency f (GHz) INPUT RETURN LOSS vs. FREQUENCY VCC = 3.0 V VCC = 3.0 V VCC = 3.0 V VCC = 3.0 V VCC = 2.4 V TA = +25°C TA = +85°C TA = +25°C TA = –40°C VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V TA = –40°C TA = –40°C TA = +25°C TA = +85°CVCC = 3.3 V TA = +85°C Discontinued Product
Data Sheet P14637EJ2V0DS00 27 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8151TA − OUTPUT RETURN LOSS vs. FREQUENCY VCC = 3.0 V OUTPUT POWER vs. INPUT POWER –20 –10 +10 –30 0.1 0.3 1.0 3.0 Output Return Loss RLout (dB) Frequency f (GHz) OUTPUT RETURN LOSS vs. FREQUENCY –20 –10 +10 –30 0.30.1 1.0 3.0 Output Return Loss RLout (dB) Frequency f (GHz) –20 –25 –10 –15 +10 –30 Output Power Pout (dBm) Input Power Pin (dBm) OUTPUT POWER OF EACH TONE, IM 3 vs. INPUT POWER OF EACH TONE –60 –70 –40 –50 –30 –20 –10 +10 –80 Output Power of Each Tone PO(each) (dBm) 3rd Order Intermodulation Distortion IM3 (dBm) –40 Pout IM3 VCC = 3.0 V f1 = 1.000 GHz f2 = 1.001 GHz –5 0 +5 Input Power of Each Tone Pin(each) (dBm) OUTPUT POWER vs. INPUT POWER –20 –25 –10 –15 +10 –30 Output Power Pout (dBm) Input Power Pin (dBm) 0–20 –15 –10 –5 0 +5 3rd Order Intermodulation Distortion IM3 (dBC ) Output Powr of Each Tone PO(each) (dBm) 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE f1 = 1.000 GHz f2 = 1.001 GHz VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V VCC = 2.4 V VCC = 3.3 V VCC = 3.0 V TA = –40°C TA = +25°C TA = +85°C VCC = 3.0 V VCC = 3.0 V TA =+85°C TA = +25°C TA = –40°C VCC = 3.3 V VCC = 2.4 V Discontinued Product
Data Sheet P14637EJ2V0DS0028 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8151TA − 4.5 6.5 7.5 5.5 2 2.5 3 3.5 Noise Figure NF (dB) Supply Voltage VCC (V) NOISE FIGURE vs. SUPPLY VOLTAGE Discontinued Product
Data Sheet P14637EJ2V0DS00 29 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8151TA − S-PARAMETERS (monitored at connector on board) TA = +25°C, VCC = Vout = 3.0 V S11 REF 1.0 Units 1 200.0 mUnits/ 26.748 Ω –46.359 Ω MARKER 1 START 0.100000000 GHz STOP 3.100000000 GHz S22 REF 1.0 Units 1 200.0 mUnits/ 49.086 Ω –23.154 Ω MARKER 1 START 0.100000000 GHz STOP 3.100000000 GHz Discontinued Product
Data Sheet P14637EJ2V0DS0030 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8151TA − INSERTION POWER GAIN vs. FREQUENCY INPUT RETURN LOSS vs. FREQUENCY –40 –30 –20 –10 +20 +10 –60 –50 0.1 0.3 1.0 3.0 Insertion Power Gain GP (dB) Frequency f (GHz) ISOLATION vs. FREQUENCY –60 –50 –40 –20 –30 –70 0.30.1 1.0 3.0 Isolation ISL (dB) Frequency f (GHz) OUTPUT POWER OF EACH TONE, IM 3 vs. INPUT POWER OF EACH TONE –60 –70 –40 –50 –30 –20 –10 +10 –80 Output Power of Each Tone PO(each) (dBm) 3rd Order Intermodulation Distortion IM3 (dBm) Input Power of Each Tone Pin(each) (dBm) OUTPUT RETURN LOSS vs. FREQUENCY –20 –25 –10 –15 0 +10 –30 Output Return Loss RLout (dB) OUTPUT POWER vs. INPUT POWER –25 –10 –15 –20 +10 –30 Output Power Pout (dBm) Input Power Pin (dBm) –15 –10 –20 Input Return Loss RLin (dB) 0.1 0.3 1.0 3.0 Frequency f (GHz) 0.1 0.3 1.0 3.0 Frequency f (GHz) VCC = 3.0 V f1 = 1.660 GHz f2 = 1.661 GHz VCC = 3.0 V VCC = 2.4 V VCC = 3.3 V VCC = 2.4 V VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V VCC = 3.0 V VCC = 3.3 V VCC = 2.4 V VCC = 3.0 V VCC = 3.3 V Pout IM3 Discontinued Product
Data Sheet P14637EJ2V0DS00 31 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8151TA − 0–20 –15 –10 –5 0 +5 3rd Order Intermodulation Distortion IM3 (dBc) Output Power of Each Tone PO(each) (dBm) 6.5 7.5 5.5 4.5 2 2.5 3 3.5 Noise Figure NF (dB) Supply Voltage VCC (V) 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE NOISE FIGURE vs. SUPPLY VOLTAGE VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V f1 = 1.660 GHz f2 = 1.661 GHz Discontinued Product
Data Sheet P14637EJ2V0DS0032 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8151TA − S-PARAMETERS (monitored at connector on board) TA = +25°C, VCC = Vout = 3.0 V S11 REF 1.0 Units 1 200.0 mUnits/ 24.301 Ω –37.246 Ω START 0.100000000 GHz STOP 3.100000000 GHz S22 REF 1.0 Units 1 200.0 mUnits/ 64.633 Ω –35.777 Ω START 0.100000000 GHz STOP 3.100000000 GHz Discontinued Product
Data Sheet P14637EJ2V0DS00 33 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8151TA − INSERTION POWER GAIN vs. FREQUENCY INPUT RETURN LOSS vs. FREQUENCY –40 –30 –20 –10 +20 +10 –60 –50 0.1 0.3 1.0 3.0 Insertion Power Gain GP (dB) Frequency f (GHz) ISOLATION vs. FREQUENCY –60 –50 –40 –20 –30 –70 0.30.1 1.0 3.0 Isolation ISL (dB) Frequency f (GHz) OUTPUT POWER OF EACH TONE, IM 3 vs. INPUT POWER OF EACH TONE –60 –70 –40 –50 –30 –20 –10 +10 –80 Output Power of Each Tone PO(each) (dBm) 3rd Order Intermodulation Distortion IM3 (dBm) Input Power of Each Tone Pin(each) (dBm) OUTPUT RETURN LOSS vs. FREQUENCY –20 –25 –10 –15 0 +10 –30 Output Return Loss RLout (dB) OUTPUT POWER vs. INPUT POWER –25 –10 –15 –20 +10 –30 Output Power Pout (dBm) Input Power Pin (dBm) –15 –10 –20 Input Return Loss RLin (dB) 0.1 0.3 1.0 3.0 Frequency f (GHz) 0.1 0.3 1.0 3.0 Frequency f (GHz) VCC = 3.0 V f1 = 1.900 GHz f2 = 1.901 GHz VCC = 2.4 V VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V VCC = 2.4 V Pout IM3 VCC = 3.0 V VCC = 3.0 V VCC = 3.3 V VCC = 3.3 V VCC = 2.4 V VCC = 3.0 V VCC = 3.3 V Discontinued Product
Data Sheet P14637EJ2V0DS0034 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8151TA − 3rd Order Intermodulation Distortion IM3 (dBc) Output Power of Each Tone PO(each) (dBm) 6.5 7.5 5.5 4.5 2 2.5 3 3.5 Noise Figure NF (dB) Supply Voltage VCC (V) 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE NOISE FIGURE vs. SUPPLY VOLTAGE f1 = 1.900 GHz f2 = 1.901 GHz VCC = 2.4 V VCC = 3.0 V VCC = 3.3 V Discontinued Product
Data Sheet P14637EJ2V0DS00 35 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA S-PARAMETERS (VCC = Vout = 3.0 V) − µPC8151TA − S11-FREQUENCY 1.0 G 2.0 G 3.0 G 0.1 G S22-FREQUENCY 1.0 G 2.0 G 3.0 G 0.1 G Discontinued Product
Data Sheet P14637EJ2V0DS0036 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA TYPICAL S-PARAMETER VALUES (TA = +25°C) µPC8151TA VCC = Vout = 3.0 V, ICC = 4.2 mA FREQUENCY S 11 S21 S12 S22 Discontinued Product
Data Sheet P14637EJ2V0DS00 37 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8152TA − 0 0123 4 Circuit Current ICC (mA) Supply Voltage VCC (V) –60 –40 –20 +20 +40 +60 +80 +1000 Circuit Current ICC (mA) Operating Ambient Temperature TA (°C) CIRCUIT CURRENT vs. SUPPLY VOLTAGE CIRCUIT CURRENT vs. OPERATING AMBIENT TEMPERATURE VCC = 3.0 VNo signal Discontinued Product
Data Sheet P14637EJ2V0DS0038 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8152TA − S-PARAMETERS (monitored at connector on board) TA = +25°C, VCC = Vout = 3.0 V S11 REF 1.0 Units 1 200.0 mUnits/ 51.59 Ω 20.508 Ω MARKER 1 START 0.100000000 GHz STOP 3.100000000 GHz S22 REF 1.0 Units 1 200.0 mUnits/ 75.816 Ω –12.941 Ω MARKER 1 START 0.100000000 GHz STOP 3.100000000 GHz Discontinued Product
Data Sheet P14637EJ2V0DS00 39 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8152TA − –30 –20 –10 +10 +20 +30 –40 0.1 0.3 1.0 3.0 Insertion Power Gain GP (dB) Frequency f (GHz) INSERTION POWER GAIN vs. FREQUENCY INSERTION POWER GAIN vs. FREQUENCY –30 –20 –10 +10 +20 +30 –40 0.1 0.3 1.0 3.0 Insertion Power Gain GP (dB) Frequency f (GHz) –60 –50 –40 –30 –70 0.1 0.3 1.0 3.0 Isolation ISL (dB) Frequency f (GHz) ISOLATION vs. FREQUENCY –60 –50 –40 –30 –70 0.1 0.3 1.0 3.0 Isolation ISL (dB) Frequency f (GHz) ISOLATION vs. FREQUENCY –20 –25 –15 –10 –30 0.1 0.3 1.0 3.0 Input Return Loss RLin (dB) Frequency f (GHz) INPUT RETURN LOSS vs. FREQUENCY –25 –20 –10 –15 –30 0.1 0.3 1.0 3.0 Input Return Loss RLin (dB) Frequency f (GHz) INPUT RETURN LOSS vs. FREQUENCY VCC = 3.0 V VCC = 3.0 V VCC = 3.0 V VCC = 2.4 V VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V TA = +85°C TA = +25°C TA = –40°C TA = +85°C VCC = 3.3 V VCC = 3.0 V VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V TA = +85°C TA = +25°C TA = –40°C TA = –40°C TA = +25°C Discontinued Product
Data Sheet P14637EJ2V0DS0040 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8152TA − OUTPUT RETURN LOSS vs. FREQUENCY VCC = 3.0 V OUTPUT POWER vs. INPUT POWER –20 –10 +10 –30 0.1 0.3 1.0 3.0 Output Return Loss RLout (dB) Frequency f (GHz) OUTPUT RETURN LOSS vs. FREQUENCY –20 –10 +10 –30 0.30.1 1.0 3.0 Output Return Loss RLout (dB) Frequency f (GHz) –20 –10 –15 –25 Output Power Pout (dBm) Input Power Pin (dBm) OUTPUT POWER OF EACH TONE, IM 3 vs. INPUT POWER OF EACH TONE –60 –70 –40 –50 –30 –20 –10 +20 +10 –80 Output Power of Each Tone PO(each) (dBm) 3rd Order Intermodulation Distortion IM3 (dBm) –40 Pout IM3 Input Power of Each Tone Pin(each) (dBm) OUTPUT POWER vs. INPUT POWER –20 –25 –10 –15 Output Power Pout (dBm) Input Power Pin (dBm) 3rd Order Intermodulation Distortion IM3 (dBc) Output Power of Each Tone PO(each) (dBm) 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V VCC = 3.3 V VCC = 3.0 V TA = –40°C TA = +25°C TA = +85°C TA = +85°C TA = +25°C TA = –40°C VCC = 3.0 V f1 = 1.000 GHz f2 = 1.001 GHz VCC = 3.0 V f1 = 1.000 GHz f2 = 1.001 GHz VCC = 2.4 V VCC = 3.0 V VCC = 3.3 V VCC = 2.4 V Discontinued Product
Data Sheet P14637EJ2V0DS00 41 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8152TA − 5.5 3.5 2.5 4.5 2 2.5 3 3.5 Noise Figure NF (dB) Supply Voltage VCC (V) NOISE FIGURE vs. SUPPLY VOLTAGE Discontinued Product
Data Sheet P14637EJ2V0DS0042 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8152TA − S-PARAMETERS (monitored at connector on board) TA = +25°C, VCC = Vout = 3.0 V S11 REF 1.0 Units 1 200.0 mUnits/ 98.301 Ω 25.836 Ω MARKER 1 START 0.100000000 GHz STOP 3.100000000 GHz S22 REF 1.0 Units 1 200.0 mUnits/ 22.714 Ω 10.238 Ω MARKER 1 START 0.100000000 GHz STOP 3.100000000 GHz Discontinued Product
Data Sheet P14637EJ2V0DS00 43 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8152TA − INSERTION POWER GAIN vs. FREQUENCY INPUT RETURN LOSS vs. FREQUENCY –40 –30 –20 –10 +20 +30 +10 –50 0.1 0.3 1.0 3.0 Insertion Power Gain GP (dB) Frequency f (GHz) ISOLATION vs. FREQUENCY –60 –50 –40 –30 –70 0.30.1 1.0 3.0 Isolation ISL (dB) Frequency f (GHz) OUTPUT POWER OF EACH TONE, IM 3 vs. INPUT POWER OF EACH TONE –60 –70 –40 –50 –30 –20 –10 +20 +10 –80 Output Power of Each Tone PO(each) (dBm) 3rd Order Intermodulation Distortion IM3 (dBm) Input Power of Each Tone Pin(each) (dBm) OUTPUT RETURN LOSS vs. FREQUENCY –20 –10 0 +10 –30 Output Return Loss RLin (dB) OUTPUT POWER vs. INPUT POWER –25 –10 –15 –20 Output Power Pout (dBm) Input Power Pin (dBm) –40 –30 –20 –10 –50 Input Return Loss RLin (dB) 0.1 0.3 1.0 3.0 Frequency f (GHz) 0.1 0.3 1.0 3.0 Frequency f (GHz) VCC = 3.0 V f1 = 1.660 GHz f2 = 1.661 GHz Pout IM3 VCC = 2.4 V VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V VCC = 3.0 V VCC = 2.4 V VCC = 3.0 V VCC = 3.3 V VCC = 3.3 V VCC = 2.4 V VCC = 3.0 V VCC = 3.3 V Discontinued Product
Data Sheet P14637EJ2V0DS0044 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8152TA − 3rd Order Intermodulation Distortion IM3 (dBc) Output Power of Each Tone PO(each) (dBm) 4.5 5.5 3.5 2.5 2 2.5 3 3.5 Noise Figure NF (dB) Supply Voltage VCC (V) 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE NOISE FIGURE vs. SUPPLY VOLTAGE VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V f1 = 1.660 GHz f2 = 1.661 GHz Discontinued Product
Data Sheet P14637EJ2V0DS00 45 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8152TA − S-PARAMETERS (monitored at connector on board) TA = +25°C, VCC = Vout = 3.0 V S11 REF 1.0 Units 1 200.0 mUnits/ 85.828 Ω 11.969 Ω MARKER 1 START 0.100000000 GHz STOP 3.100000000 GHz S22 REF 1.0 Units 1 200.0 mUnits/ 62.398 Ω 55.551 Ω MARKER 1 START 0.100000000 GHz STOP 3.100000000 GHz Discontinued Product
Data Sheet P14637EJ2V0DS0046 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8152TA − INSERTION POWER GAIN vs. FREQUENCY INPUT RETURN LOSS vs. FREQUENCY –40 –30 –20 –10 +20 +30 +10 –500.1 0.3 1.0 3.0 Insertion Power Gain GP (dB) Frequency f (GHz) ISOLATION vs. FREQUENCY –60 –50 –40 –20 –10 –30 –70 0.30.1 1.0 3.0 Isolation ISL (dB) Frequency f (GHz) OUTPUT POWER OF EACH TONE, IM 3 vs. INPUT POWER OF EACH TONE –60 –70 –40 –50 –30 –20 –10 +20 +10 –80 Output Power of Each Tone PO(each) (dBm) 3rd Order Intermodulation Distortion IM3 (dBm) Input Power of Each Tone Pin(each) (dBm) OUTPUT RETURN LOSS vs. FREQUENCY –20 –10 0 +10 –30 Output Return Loss RLout (dB) OUTPUT POWER vs. INPUT POWER –25 –10 –15 –20 –30 Output Power Pout (dBm) Input Power Pin (dBm) –40 –30 –20 –10 –50 Input Return Loss RLin (dB) 0.1 0.3 1.0 3.0 Frequency f (GHz) 0.1 0.3 1.0 3.0 Frequency f (GHz) Pout IM3 VCC = 3.0 V f1 = 1.900 GHz f2 = 1.901 GHz VCC = 2.4 V VCC = 3.3 V VCC = 3.0 V VCC = 3.0 V VCC = 2.4 V VCC = 2.4 V VCC = 3.0 V VCC = 3.3 V VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V VCC = 2.4 V VCC = 3.0 V VCC = 3.3 V VCC = 3.3 V Discontinued Product
Data Sheet P14637EJ2V0DS00 47 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA − µPC8152TA − 3rd Order Intermodulation Distortion IM3 (dBc) Output Power of Each Tone PO(each) (dBm) 4.5 5.5 3.5 2.5 2 2.5 3 3.5 Noise Figure NF (dB) Supply Voltage VCC (V) 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE NOISE FIGURE vs. SUPPLY VOLTAGE VCC = 3.3 V VCC = 3.0 V VCC = 2.4 V f1 = 1.900 GHz f2 = 1.901 GHz Remark The graphs indicate nominal characteristics. Discontinued Product
Data Sheet P14637EJ2V0DS0048 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA S-PARAMETERS (VCC = Vout = 3.0 V) − µPC8152TA − S11-FREQUENCY 1.0 G 2.0 G 3.0 G0.1 G S22-FREQUENCY 1.0 G 2.0 G 3.0 G 0.1 G Discontinued Product
Data Sheet P14637EJ2V0DS00 49 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA TYPICAL S-PARAMETER VALUES (TA = +25°C) µPC8152TA VCC = Vout = 3.0 V, ICC = 5.6 mA FREQUENCY S 11 S21 S12 S22 Discontinued Product
Data Sheet P14637EJ2V0DS0050 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA PACKAGE DIMENSIONS 6-PIN MINIMOLD (UNIT: mm) 2.9–0.2 0.950.95 1.9 0.3 +0.1 –0.05 2.8+0.2 –0.3 1.5+0.2 –0.1 0.8 0.13–0.1 1.1+0.2 –0.1 0 to 0.1 Discontinued Product
Data Sheet P14637EJ2V0DS00 51 µµµµPC8128TA, µµµµPC8151TA, µµµµPC8152TA NOTES ON CORRECT USE (1) Observe precautions for handling because of electro-static sensitive devices. (2) Form a ground pattern as wide as possible to minimize ground impedance (to prevent undesired oscillation). All the ground pins must be connected together with wide ground pattern to decrease impedance difference. (3) The bypass capacitor should be attached to VCC line. (4) The inductor (L) should be attached between output and VCC pins. The L and series capacitor (C2) values should be adjusted for applied frequency to match impedance to next stage. (5) The DC capacitor must be attached to input pin. RECOMMENDED SOLDERING CONDITIONS This product should be soldered under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your NEC sales representative. Soldering Method Soldering Conditions Recommended Condition Symbol Infrared Reflow Package peak temperature: 235°C or below Time: 30 seconds or less (at 210°C) Count: 3, Exposure limit: None Note IR35-00-3 Time: 40 seconds or less (at 200°C) Count: 3, Exposure limit: None Note VP15-00-3 Wave Soldering Soldering bath temperature: 260°C or below Time: 10 seconds or less Count: 1, Exposure limit: None Note WS60-00-1 Partial Heating Pin temperature: 300°C Time: 3 seconds or less (per side of device) Exposure limit: None Note Note After opening the dry pack, keep it in a place below 25°C and 65% RH for the allowable storage period. Caution Do not use different soldering methods together (except for partial heating). For details of recommended soldering conditions for surface mounting, refer to information document SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E) . Discontinued Product
µµµµPC8128TA , µµµµPC8151TA , µµµµPC8152TA ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES NESAT (NEC Silicon Advanced Technology) is a trademark of NEC Corporation. M8E 00. 4 The information in this document is current as of August, 2000. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard":Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). Discontinued Product