UPC8126GR RENESAS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 42

Technical content

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.

  1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipmen t; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.

Caution electro-static sensitive devices. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. BIPOLAR ANALOG INTEGRATED CIRCUIT µµµµPC8126GR

900 MHz BAND DIRECT QUADRATURE MODULATOR IC

FOR DIGITAL MOBILE COMMUNICATION Document No. P11487EJ2V0DS00 (2nd edition) Date Published October 1999 N CP(K) Printed in Japan The mark shows major revised points. © 1997, 1999

DESCRIPTION

The µPC8126GR is a silicon monilithic integrated circuit designed as 900 MHz band direct guadrature modulator for digital mobile communication systems. This Si-MMIC consists of pre-mixer for RF and IF local oscillator and 900 MHz band guadrature modulator which are packaged in 20 pin SSOP. The device has power save function and can operate 2.7 V to 3.6 V supply voltage. Therefore, it can contribute to make RF block small, high performance and low power consumption.

FEATURES

  • Direct modulation range : 915 MHz to 960 MHz
  • Pre-mixer for RF and IF local oscillator is incorporated.
  • External local filter can be applied between pre-mixer output and modulator input port.
  • Low operation current : I CC = 35 mA (typ.) @VCC = 3 V
  • Equipped with power save function.
  • 20 pin SSOP suitable for high density surface mounting.

APPLICATIONS

  • Digital cellular phones (PDC900 MHz etc.)

ORDERING INFORMATION

PART NUMBER PACKAGE SUPPLYING FORM QUANTITY µPC8126GR-E1 20 pin plastic SSOP (225 mil) Embossed tape, 12 mm wide. Pins 1 through 10 are in tape pull- out direction. 2500 pcs/Reel To order evaluation samples, please contact your local NEC sales office. (Part number for sample order: µPC8126GR, Quantity: 20 pcs/Unit) Discontinued Product

Data Sheet P11487EJ2V0DS002 µµµµPC8126GR INTERNAL BLOCK DIAGRAM AND PIN CONNECTIONS (Top View) 1VCC 1 2MIXout 3GND 4Loinb 5Loin 6VCC 2 7Vps1 8GND 10Ib

20 RF-Loin

19 GND

18 IF-Loin

17 Vps2

16 GND

15 MODout

13 GND

90 deg. Phase Shifter (÷2) × 2 Lo Pre-mixer QUADRATURE MODULATOR SERIES PRODUCT Part Number Functions ICC (mA) fLO1in (MHz) fMODout (MHz) RF Mixer fRFout (MHz) Phase Shifter Package Application µPC8101GR 150 MHz Quad.Mod 15/@2.7 V 100 to 300 50 to 150External F/F CT-2 etc. µPC8104GR RF Up-Converter + IF Quad.Mod 28/@3.0 V 100 to 400 900 to 1 900 20-pin SSOP (225 mil) µPC8105GR 400 MHz Quad.Mod 16/@3.0 V 100 to 400 External 16-pin SSOP (225 mil) Digital Comm. µPC8110GR 1 GHz Direct Quad.Mod 24/@3.0 V 800 to 1 000 External PDC800 MHz, etc. µPC8125GR RF Up-Converter + IF Quad.Mod + AGC 36/@3.0 V 220 to 270 1 800 to 2 000 PHS µPC8126GR 915 to 960 915 to 960 20-pin SSOP (225 mil) µPC8126K 900 MHz Direct Quad.Mod with Offset-Mixer 35/@3.0 V 889 to 960 889 to 960 Doubler + F/F 28-pin QFN PDC800 MHz µPC8129GR ×2LO IF Quad. Mod+RF Up-Converter 28/@3.0 V 200 to 800 100 to 400800 to 1 900 F/F 20-pin SSOP (225 mil) GSM, DCS1800, etc. µPC8139GR-7JH Transceiver IC (1.9 GHz Indirect Quad. Mod + RX-IF + IF VCO) TX: 32.5 RX: 4.8 /@3.0 V 220 to 270 1 800 to 2 000 30-pin TSSOP (225 mil) PHS µPC8158K RF Up-Converter + IF Quad.Mod + AGC 28/@3.0 V 100 to 300 800 to 1 500 CR 28-pin QFN PDC800 M/1.5 G Remark As for detail information of series products, please refer to each data sheet. Discontinued Product

Data Sheet P11487EJ2V0DS00 3 µµµµPC8126GR APPLICATION EXAMPLE [PDC800MHz] PA AGC 1st LO 2nd MIX 2nd LO TO DEMOD. RSSI OUT I Q MAIN ANT SW SW SUB ANT SW PLL1 RSSI PLL2 φ (÷2) PC8126GRµ × 2 90° deg. Filter LNA 1st MIX Discontinued Product

Data Sheet P11487EJ2V0DS004 µµµµPC8126GR ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATING UNIT TEST CONDITIONS Supply voltage V CC 4.0 V T A = +25 °C, 1, 6, 14 pin Power Save Control Voltage V ps 4.0 V T A = +25 °C, 7, 17 pin Power Dissipation P D 430 Note 1 mW T A = +85 °C Operating Ambient Temperature T A −40 to +85 °C Storage Temperature T stg −55 to +150 °C Note 1. Mounted on a 50 × 50 × 1.6 mm double copper clad epoxy glass PWB. RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS Supply Voltage V CC 2.7 3.0 3.6 V Operating Ambient Temperature T A −25 +25 +75 C Pre-Mix. RF Input Frequency f RFin 700 1200 MHz P RFin = −11 dBm Pre-Mix. RF Input Power P RFin −13 −11 −9d B m Pre-Mix. IF Input Frequency f IFin 120 135 270 MHz P (f IFin × 7) ≤ −65 dBc PIFin = −12 dBm Pre-Mix. IF Input Power P IFin −14 −12 −10 dBm Pre-Mix. Output Frequency f MIXout 915 960 MHz Modulator Output Frequency f MODout 915 960 MHz Modulator Lo Input Frequency f Loin Modulator Lo Input Power P Loin −22.5 −18.5 −14.5 dBm I/Q Input Frequency f I/Qin DC 10 MHz I/Q Input Amplitude V I/Qin 500 mV p-p Single ended Input

250 Differential Input

Data Sheet P11487EJ2V0DS00 5 µµµµPC8126GR

ELECTRICAL CHARACTERISTICS

(TA = +25 °°°°C, VCC 1 = VCC 2 = VCC 3 = 3.0 V, Vps1, Vps2 ≥≥≥≥ 2.2 V Unless Otherwise Specified) PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS MODULATOR + PRE-MIXER TOTAL (TEST CIRCUIT 1) Total Circuit Current I CC (TOTAL) 24 35 44 mA No Input signals Total Circuit Current at Sleep Mode ICC (ps) TOTAL 0 15 µAV p s ≤ 0.5 V (Low), No Input Signals Modulator Output Power P MODout −12 −9 −6d B m Local Oscillator Leakage LoL Note 2 −35 −30 dBc Image Rejection ImR −40 −30 dBc I/Q 3rd Order Intermodulation IM 3 (I/Q) −45 −30 dBc fIF-Lo × 7 Harmonics 7f IF-Lo −65 dBc Rise Time Tps (RISE) 3 5 µs Vps: Low to High Fall Time Tps (FALL) 3 5 µs Vps: High to Low Error Vector Magnitude EVM 1.6 3.5 %rms Adjacent Channel Power ACP (Δf = ±50 kHz) −65 −60 dBc Port Current-7pin Ips (7 pin) 620 µA No Input Signals Port Current-17pin Ips (17 pin) 400 µA No Input Signals Note 2. fLoL = fIFin + fRFin fIFin = 135 MHz, PIFin = −12 dBm fRFin = 813 MHz, PRFin = −11 dBm fMODout = 948 MHz + fI/Q fI/Qin = 2.625 kHz VI/Qin = 500 mVp-p (Single ended) I/Q (DC) = Ib/Qb (DC) = V CC /2 Data Rate: 42 kbps, RNYQ: α = 0.5 MOD Pattern: All Zero fIFin = 135 MHz, PIFin = −12 dBm fRFin = 813 MHz, PRFin = −11 dBm fMODout = 948 MHz + fI/Q fI/Qin = 2.625 kHz VI/Qin = 500 mVp-p (Single ended) I/Q (DC) = Ib/Qb (DC) = V CC /2 Data Rate: 42 kbps, RNYQ: α = 0.5 MOD Pattern: PN9 Power Save Response Time Discontinued Product

Data Sheet P11487EJ2V0DS006 µµµµPC8126GR STANDARD CHARACTERISTICS FOR REFERENCE (TA = +25 °°°°C, VCC 1 = VCC 2 = VCC 3 = 3.0 V, Vps1, Vps2 ≥≥≥≥ 2.2 V Unless Otherwise Specified) PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS MODULATOR (TEST CIRCUIT 1) Modulator Circuit Current I CC (MOD) 27.5 34 mA No Input Signals Modulator Circuit Current at Sleep Mode ICC (ps) (MOD) 0 10 µAV p s ≤ 0.5 V (Low), No Input Signals Input Impedance I and Q Port Z I/Qin 90 180 k Ω fI/Q = DC to 10 MHz Modulator Output Port VSWR VSWR (MOD) 1.5 : 1 − fMODout = 948 MHz PRE-MIXER (TEST CIRUCIT 2) Pre-Mixer Circuit Current I CC (MIX) 7.5 10 mA No Input Signals Pre-Mixer Circuit Current at Sleep Mode I CC (ps) (MIX) 0 5 µAV p s ≤ 0.5 V (Low), No Input Signals Pre-Mixer Conversion Gain CG (MIX) −5 −3 −1d B Pre-Mixer Output Power P out (MIX) −17 −15 −13 dBm fRFin = 813 MHz, PRFin = −11 dBm fIFin = 135 MHz, PIFin = −12 dBm fMIXout = 948 MHz Discontinued Product

Data Sheet P11487EJ2V0DS00 7 µµµµPC8126GR PIN EXPLANATIONS Pin No. Symbol Supply Vol. (V) Pin Vol. (V) @3 V Description Equivalent Circuit 1V CC 1 (Pre-Mixer) 2.7 to 3.6 − Supply voltage pin for the premixer. An internal regulator helps keep the device stable against temperature or V CC variation. 2 Pre-Mixout 2.7 to 3.6 − Output from the pre-Mixer. This pin is designed as pen collector. Due to the high impedance output, this pin should be externally equipped with LC matching circuit to next stage. 3G N D (Modulator) 0 − Ground pin for the modulator. Connect to the ground with minimum inductance. Track length should be kept as short as possible. 4L O i n b − 2.6 Bypass of Lo input for modulator. This pin is grounded through around 33 pF capacitor. 5L O i n − 2.6 Lo input for the phase shifter. Connect around 300 Ω between pin 4 and 5 to match to 50 Ω by LC. 6V CC 2 2.7 to 3.6 − Supply voltage pin for the phase shifter and IQ Mixer. An internal regulator helps keep the device stable against temperature or V CC variation. 7V PS 1 (Modulator) VPS − Power save control pin for the modulator can control On/Sleep state with bias as follows. 8G N D (Modulator) 0 − Ground pin for the modulator. Connect to the ground with minimum inductance. Track length should be kept as short as possible. VPS (V) STATE 2.2 to 3.6 ON (Active Mode) 0 to 0.5 OFF (Sleep Mode) 5 4 Discontinued Product

Data Sheet P11487EJ2V0DS008 µµµµPC8126GR PIN EXPLANATIONS Pin No. Symbol Supply Vol. (V) Pin Vol. (V) @3 V Description Equivalent Circuit 9I V CC /2 − Input for I signal. This input impedance is 180 kΩ . In case of that I/Q input signals are single ended, amplitude of the signal is 500 mVp-p max. Note 3 10 Ib V CC /2 − Input for I signal. This input impedance is 180 kΩ . In case of that I/Q input signals are single ended, V CC /2 biased DC signal should be input. In case of that I/Q input signals are differential, amplitude of the signal is 250m Vp-p; max. Note 3 11 Qb V CC /2 − Input for Q signal. This input impedance is 180 kΩ . In case of that I/Q input signals are single ended, V CC /2 biased DC signal should be input. In case of that I/Q input signals are differential, amplitude of the signal is 250 mVp-p max. Note 3 12 Q V CC /2 − Input for Q signal. This input impedance is 180 kΩ . In case of that I/Q input signals are single ended, amplitude of the signal is 500 mVp-p max. Note 3 (Modulator) 0 − Ground pin for the modulator. Connect to the ground with minimum inductance. Track length should be kept as short as possible. 14 V CC 3 2.7 to 3.6 − Supply voltage pin for the output buffer amplifier of modulator. An internal regulator helps keep the device stable against temperature or V CC variation. 15 MODout − 1.6 Output pin from the modulator. This is emitter follower output. So this output impedance is low. (Modulator) 0 − Ground pin for the modulator. Connect to the ground with minimum inductance. Track length should be kept as short as possible. 109 1211 Discontinued Product

Data Sheet P11487EJ2V0DS00 9 µµµµPC8126GR PIN EXPLANATIONS Pin No. Symbol Supply Vol. (V) Pin Vol. (V) @3 V Description Equivalent Circuit

17 V PS 2

(Pre-Mix.) VPS − Power save control pin can control the On/Sleep state with bias as follows. 18 IF-Loin − 1.3 IF input pin for the pre-Mixer. This pin is biased internally. Capacitor should be connected in series, and grounded through 51 Ω . (Pre-Mix.) 0 − Ground pin for modulator. Connect to the ground with minimum inductance. Track length should be kept as short as possible. 20 RF-Loin − 2.3 RF input pin for the pre-Mixer. This pin is biased internally. Capacitor should be connected in series, and grounded through 51 Ω . Note 3 Relations between amplitude and VCC /2 bias of input signal are following. I/Q input signal (mVp-p) Single ended iinput I = Q Differential input I = Ib = Q = Qb 2.7 to 3.6 1.35 to 1.8 ≤ 500 ≤ 250 VPS (V) STATE 2.2 to 3.6 ON (Active Mode) 0 to 0.5 OFF (Sleep Mode) I/Q DC Voltage (V) VCC /2 = I = Ib = Q = Qb Supply Voltage (V) VCC Discontinued Product

Data Sheet P11487EJ2V0DS0010 µµµµPC8126GR Ib from LOin × 2 ÷ 2 F/F I Q Qb to MODout EXPLANATION OF INTERNAL FUNCTION BLOCK FUNCTION/OPERATION BLOCK DIAGRAM 90 ° PHASE SHIFTER Input signal from L O is send to digital circuit of T-type flip-flop through frequency doubler. Output signal from T-type F/F is changed to same frequency as L O input and that have quadrature phase shift, 0 °, 90 °, 180 °, 270 °. These circuits have function of self phase correction to make correctly quadrature signals. BUFFER AMP. Buffer amplifiers for each phase signals to send to each mixers. MIXER Each signals from buffer amp. are quadrature modulated with two double-balanced mixers. High accurate phase and amplitude inputs are realized to good performance for image rejection. ADDER Output signals from each mixers are added with adder and send to final amplifier. Discontinued Product

Data Sheet P11487EJ2V0DS00 11 µµµµPC8126GR STANDARD TYPICAL CHARACTERISTICS 〈〈〈〈Modulator+Pre-Mixer Total〉〉〉〉 Test Circuit 2, TA = +25 °C, VCC 1 = VCC 2 = VCC 3 = 3.0 V, Vps1 = Vps2 = 3.0 V, I/Q (DC) = Ib/Qb (DC) = VCC /2, VI/Qin = 420 mVp-p (Differential Input), fI/Qin = 2.625 kHz, fIFin = 135 MHz, PIFin = −12 dBm, fRFin = 813 MHz, PRFin = −11 dBm, fMODout = 948 MHz + fI/Qin, Data Rate = 42 kbps, RNYQ : α = 0.5, MOD Pattern : All Zero, Unless Otherwise Specified ICC (TOTAL) - Total Circuit Current - mA VCC - Supply Voltage - V ICC (TOTAL) vs Vps ICC (TOTAL) - Total Circuit Current - mA Vps - Power Save Control Voltage - V No input signal T A = +80 °C TA = +25 °C TA = –30 °C No input signal TA = +80 °C TA = +25 °C TA = –30 °C ICC (TOTAL) vs VCC Discontinued Product

Data Sheet P11487EJ2V0DS0012 µµµµPC8126GR PMODout vs VI/Qin (at TA = –30 °C) PMODout Modulator Output Power - dBm PMODout Modulator Output Power - dBm VI/Qin - I/Q Input Amplitude - mVP-P VCC = 3.6 V VCC = 3.0 V VCC = 2.7 V VCC = 3.6 V VCC = 3.0 V VCC = 2.7 V VCC = 3.6 V VCC = 3.0 V VCC = 2.7 V –10 –15 –20 –25 20 100 200 50010005010 P MODout vs VI/Qin (at TA = +80 °C) PMODout Modulator Output Power - (dBm) VI/Qin - I/Q Input Amplitude - mVP-P –10 –15 –20 –25 20 100 200 50010005010 P MODout vs VI/Qin (at TA = +25 °C) VI/Qin - I/Q Input Amplitude - mVP-P –10 –15 –20 –25 20 100 200 50010005010 Discontinued Product

Data Sheet P11487EJ2V0DS00 13 µµµµPC8126GR IM2 (I/Q) –25 –30 –35 –40 –45 –50 20 100 200 50010005010 LoL 20 100 LoL IM3 (I/Q) 200 50010005010 ImR 20 100 LoL IM3 (I/Q) 200 50010005010 ImR ImR IM3 (I/Q) LoL, ImR, IM3I/Q vs VI/Qin (at TA = –30 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc VI/Qin - I/Q Input Amplitude - mVP-P –25 –30 –35 –40 –45 –50 LoL, ImR, IM 3I/Q vs VI/Qin (at TA = +80 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc VI/Qin - I/Q Input Amplitude - mVP-P –25 –30 –35 –40 –45 –50 LoL, ImR, IM 3I/Q vs VI/Qin (at TA = +25 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc VI/Qin - I/Q Input Amplitude - mVP-P Discontinued Product

Data Sheet P11487EJ2V0DS0014 µµµµPC8126GR ImR PMODout LoL ImR IM3 (I/Q) IM2 (I/Q) ImR ImR IM2 (iI/Q) IM2(I/Q) IM3 (I/Q) IM3 (I/Q)j LoL LoL PMODout PMODout PMODout LoL ImR IM3 iI/Q j IM2 iI/Q j PMODout PMODout LoL LoL ImR IM3 iI/Q j IM2 iI/Q j IM3 iI/Q j IM2 iI/Q j PMODout , LoL, ImR, IM3I/Q vs fLoin (at VCC = 2.7 V, TA = –30 °C) PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 900 950 1000 900 950 1000 900 950 1000 LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc fLoin - Lo Input Frequency - MHz PMODout , LoL, ImR, IM3I/Q vs fLoin (at VCC = 3.0 V, TA = –30 °C) PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc fLoin - Lo Input Frequency - MHz PMODout , LoL, ImR, IM3I/Q vs fLoin (at VCC = 3.6 V, TA = –30 °C) PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc fLoin - Lo Input Frequency - MHz PMODout , LoL, ImR, IM3I/Q vs fLoin (at VCC = 2.7 V, TA = +25 °C) PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 900 950 1000 900 950 1000 900 950 1000 LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc fLoin - Lo Input Frequency - MHz PMODout , LoL, ImR, IM3I/Q vs fLoin (at VCC = 3.0 V, TA = +25 °C) PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc fLoin - Lo Input Frequency - MHz PMODout , LoL, ImR, IM3I/Q vs fLoin (at VCC =3.6 V, TA = +25 °C) PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc fLoin - Lo Input Frequency - MHz Discontinued Product

Data Sheet P11487EJ2V0DS00 15 µµµµPC8126GR PMODout PMODout PMODout IM2 (I/Q) IM2 (I/Q) IM2 (I/Q) IM3 (I/Q) IM3 (I/Q) IM3 (I/Q) LoL LoL LoL ImR PMODout PMODout PMODout IM2 (I/Q) IM2 (I/Q) IM2 (I/Q) IM3 (I/Q) IM3 (I/Q) IM3 (I/Q) LoL LoL LoL ImR ImR ImR ImR ImR PMODout , LoL, ImR, IM3I/Q vs fLoin (at VCC = 2.7 V, TA = +80 °C) PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 900 950 1000 LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc fLoin - Lo Input Frequency - MHz PMODout , LoL, ImR, IM3I/Q vs fLoin (at VCC = 3.0 V, TA = +80 °C) PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 900 950 1000 LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc fLoin - Lo Input Frequency - MHz PMODout , LoL, ImR, IM3I/Q vs fLoin (at VCC = 3.6 V, TA = +80 °C) PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 900 950 1000 LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc fLoin - Lo Input Frequency - MHz PMODout , LoL, ImR, IM3I/Q vs PIF-Loin (at VCC = 2.7 V, TA = –30 °C) PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 –17 –12 7 LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PIF-Loin Pre-Mix. IF Input Power - dBm PMODout , LoL, ImR, IM3I/Q vs PIF-Loin (at VCC = 3.0 V, TA = –30 °C) PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 –17 –12 7 LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PIF-Loin Pre-Mix. IF Input Power - dBm PMODout , LoL, ImR, IM3I/Q vs PIF-Loin (at VCC = 3.6 V, TA = –30 °C) PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 –17 –12 7 LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PIF-Loin Pre-Mix. IF Input Power - dBm Discontinued Product

Data Sheet P11487EJ2V0DS0016 µµµµPC8126GR PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 PMODout PMODout PMODout IM2 (I/Q) IM2(I/Q) IM2(I/Q) IM3(I/Q) IM3(I/Q) IM3(I/Q) LoL LoL LoL ImR ImR ImR PMODout PMODoutPMODout IM2 (I/Q) IM2 (I/Q)IM2 (I/Q) IM3 (I/Q) IM3 (I/Q) IM3 (I/Q) LoL LoLLoL ImR ImR ImR PMODout , LoL, ImR, IM3I/Q vs PIF-Loin (at VCC = 2.7 V, TA = +25 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PIF-Loin - Pre-Mix. IF Input Power - dBm PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 –17 –12 P MODout , LoL, ImR, IM3I/Q vs PIF-Loin (at VCC =3.0 V, TA = +25 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PIF-Loin - Pre-Mix. IF Input Power - dBm PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 P MODout , LoL, ImR, IM3I/Q vs PIF-Loin (at VCC =3.6 V, TA = +25 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PIF-Loin - Pre-Mix. IF Input Power - dBm PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 P MODout , LoL, ImR, IM3I/Q vs PIF-Loin (at VCC = 2.7 V, TA = +80 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PIF-Loin - Pre-Mix. IF Input Power - dBm PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 –17 –12 P MODout , LoL, ImR, IM3I/Q vs PIF-Loin (at VCC =3.0 V, TA = +80 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PIF-Loin - Pre-Mix. IF Input Power - dBm PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 P MODout , LoL, ImR, IM3I/Q vs PIF-Loin (at VCC =3.6 V, TA = +80 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PIF-Loin - Pre-Mix. IF Input Power - dBm Discontinued Product

Data Sheet P11487EJ2V0DS00 17 µµµµPC8126GR IM3 (I/Q) ImR PMODout PMODout PMODout IM2 (I/Q) IM2 (I/Q) IM2 (I/Q) IM3 (I/Q) IM3 (I/Q) IM3 (I/Q) LoL LoL LoL ImR ImR ImR PMODoutPMODoutPMODout IM2 (I/Q) IM2 (I/Q) IM2 (I/Q) IM3 (I/Q) IM3 (I/Q) LoL LoLLoL ImR ImR PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 P MODout , LoL, ImR, IM3I/Q vs PRF-Loin (at VCC = 2.7 V, TA = –30 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PRF-Loin - Pre-Mix. RF Input Power - dBm PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 P MODout , LoL, ImR, IM3I/Q vs PRF-Loin (at VCC = 3.0 V, TA = –30 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PRF-Loin - Pre-Mix. RF Input Power - dBm PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 P MODout , LoL, ImR, IM3I/Q vs PRF-Loin (at VCC = 3.6 V, TA = –30 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PRF-Loin - Pre-Mix. RF Input Power - dBm PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 P MODout , LoL, ImR, IM3I/Q vs PRF-Loin (at VCC = 2.7 V, TA = +25 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PRF-Loin - Pre-Mix. RF Input Power - dBm PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 P MODout , LoL, ImR, IM3I/Q vs PRF-Loin (at VCC = 3.0 V, TA = +25 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PRF-Loin - Pre-Mix. RF Input Power - dBm PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 P MODout , LoL, ImR, IM3I/Q vs PRF-Loin (at VCC = 3.6 V, TA = +25 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PRF-Loin - Pre-Mix. RF Input Power - dBm Discontinued Product

Data Sheet P11487EJ2V0DS0018 µµµµPC8126GR PMODout PMODout PMODout IM2 (I/Q) IM2 (I/Q) IM2 (I/Q)IM3 (I/Q) IM3 (I/Q) IM3 (I/Q) LoL LoL LoL ImR ImR ImR PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 –15 –11 –7 P MODout , LoL, ImR, IM3I/Q vs PRF-Loin (at VCC = 2.7 V, TA = +80 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PRF-Loin - Pre-Mix. RF Input Power - dBm PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 –15 –11 –7 P MODout , LoL, ImR, IM3I/Q vs PRF-Loin (at VCC = 3.0 V, TA = +80 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PRF-Loin - Pre-Mix. RF Input Power - dBm PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 –15 –11 –7 P MODout , LoL, ImR, IM3I/Q vs PRF-Loin (at VCC = 3.6 V, TA = +80 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc PRF-Loin - Pre-Mix. RF Input Power - dBm Discontinued Product

Data Sheet P11487EJ2V0DS00 19 µµµµPC8126GR PMODout PMODout PMODout IM2 (I/Q) IM2 (I/Q) IM2 (I/Q) IM3 (I/Q) IM3 (I/Q) IM3 (I/Q) LoL LoL LoL ImR ImR ImR PMODoutPMODout PMODout IM2 (I/Q) IM2 (I/Q) IM2 (I/Q) IM3 (I/Q) IM3 (I/Q) IM3 (I/Q) LoL LoL LoL ImR ImR ImR PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 1.25 1.35 1.45 P MODout , LoL, ImR, IM3I/Q vs I/Q(DC) (at VCC = 2.7 V, TA = –30 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc I/Q(DC) - I/Q Supply Voltage - V PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 1.4 1.5 1.6 P MODout , LoL, ImR, IM3I/Q vs I/Q(DC) (at VCC = 3.0 V, TA = –30 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc I/Q(DC) - I/Q Supply Voltage - V PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 1.7 1.8 1.9 P MODout , LoL, ImR, IM3I/Q vs I/Q(DC) (at VCC = 3.6 V, TA = –30 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc I/Q(DC) - I/Q Supply Voltage - V PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 1.25 1.35 1.45 P MODout , LoL, ImR, IM3I/Q vs I/Q(DC) (at VCC = 2.7 V, TA = +25 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc I/Q(DC) - I/Q Supply Voltage - V PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 1.4 1.5 1.6 P MODout , LoL, ImR, IM3I/Q vs I/Q(DC) (at VCC = 3.0 V, TA = +25 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc I/Q(DC) - I/Q Supply Voltage - V PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 1.7 1.8 1.9 P MODout , LoL, ImR, IM3I/Q vs I/Q(DC) (at VCC = 3.6 V, TA = +25 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc I/Q(DC) - I/Q Supply Voltage - V Discontinued Product

Data Sheet P11487EJ2V0DS0020 µµµµPC8126GR PMODout IM2 (I/Q) IM3 (I/Q) LoL ImR PMODout IM2 (I/Q) IM3 (I/Q) LoL ImR PMODout IM2 (I/Q) IM3 (I/Q) LoL ImR PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 1.25 1.35 1.45 P MODout , LoL, ImR, IM3I/Q vs I/Q(DC) (at VCC = 2.7 V, TA = +80 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc I/Q(DC) - I/Q Supply Voltage - V PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 1.4 1.5 1.6 P MODout , LoL, ImR, IM3I/Q vs I/Q(DC) (at VCC = 3.0 V, TA = +80 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc I/Q(DC) - I/Q Supply Voltage - V PMODout - Modulator Output Power - dBm –30 –35 –40 –45 –50 –55 –10 –15 –20 –25 –30 1.7 1.8 1.9 P MODout , LoL, ImR, IM3I/Q vs I/Q(DC) (at VCC = 3.6 V, TA = +80 °C) LoL - Local Oscillator Leakage - dBc ImR - Image Rejection - dBc IM 3I/Q - I/Q 3rd. Order Intermodulation - dBc I/Q(DC) - I/Q Supply Voltage - V Discontinued Product

Data Sheet P11487EJ2V0DS00 21 µµµµPC8126GR –20 –40 –60 –80 –100 –120 –17 –12 –7 P(f IF 7) vs PIF-Loin (at VCC = 2.7 V, TA = –30 °C) × P(fIF 7) vs PIF-Loin (at VCC = 3.0 V, TA = –30 °C) × P(fIF 7) vs PIF-Loin (at VCC = 3.6 V, TA = –30 °C) ××P(fIF 7) - fIF-Lo 7 Harmonics - dBc PIF-Loin - Pre-Mix. IF Input Power - dBm –20 –40 –60 –80 –100 –120 –17 –12 –7 ××P(fIF 7) - fIF-Lo 7 Harmonics - dBc PIF-Loin - Pre-Mix. IF Input Power - dBm –20 –40 –60 –80 –100 –120 –17 –12 –7 ××P(fIF 7) - fIF-Lo 7 Harmonics - dBc PIF-Loin - Pre-Mix. IF Input Power - dBm –20 –40 –60 –80 –100 –120 –17 –12 –7 P(f IF 7) vs PIF-Loin (at VCC = 2.7 V, TA = +25 °C) × P(fIF 7) vs PIF-Loin (at VCC = 3.0 V, TA = +25 °C) × P(fIF 7) vs PIF-Loin (at VCC = 3.6 V, TA = +25 °C) ××P(fIF 7) - fIF-Lo 7 Harmonics - dBc PIF-Loin - Pre-Mix. IF Input Power - dBm –20 –40 –60 –80 –100 –120 –17 –12 –7 ××P(fIF 7) - fIF-Lo 7 Harmonics - dBc PIF-Loin - Pre-Mix. IF Input Power - dBm –17 –12 –7 ××P(fIF 7) - fIF-Lo 7 Harmonics - dBc PIF-Loin - Pre-Mix. IF Input Power - dBm –20 –40 –60 –80 –100 –120 Recommended operating range Recommended operating range Recommended operating range Recommended operating range Recommended operating range Recommended operating range Discontinued Product

Data Sheet P11487EJ2V0DS0022 µµµµPC8126GR –20 –40 –60 –80 –100 –120 –17 –12 –7 P(f IF 7) vs PIF-Loin (at VCC = 2.7 V, TA = +80 °C) × P(fIF 7) vs PIF-Loin (at VCC = 3.0 V, TA = +80 °C) × P(fIF 7) vs PIF-Loin (at VCC = 3.6 V, TA = +80 °C) ××P(fIF 7) - fIF-Lo 7 Harmonics - dBc ××P(fIF 7) - fIF-Lo 7 Harmonics - dBc ××P(fIF 7) - fIF-Lo 7 Harmonics - dBc PIF-Loin - Pre-Mix. IF Input Power - dBm –20 –40 –60 –80 –100 –120 –17 –12 –7 P IF-Loin - Pre-Mix. IF Input Power - dBm –20 –40 –60 –80 –100 –120 –17 –12 –7 P IF-Loin - Pre-Mix. IF Input Power - dBm Recommended operating range Recommended operating range Recommended operating range Discontinued Product

Data Sheet P11487EJ2V0DS00 23 µµµµPC8126GR A A A 100200 500 100010 100200 500 100010 EVM f = ±100 kHz f = ±100 kHz f = ±100 kHz f = ±50 kHzf = ±50 kHz f = ±50 kHz EVM EVM –40 –50 –60 –70 –80 100200 500 100010 ACP vs VI/Qin (at VCC = 2.7 V) ACP - Adjacent Channel Power - dBc VI/Qin - I/Q Input Amplitude - mVP-P –40 –50 –60 –70 –80 ACP vs V I/Qin (at VCC = 3.0 V) ACP - Adjacent Channel Power - dBc VI/Qin - I/Q Input Amplitude - mVP-P –40 –50 –60 –70 –80 ACP vs V I/Qin (at VCC = 3.6 V) ACP - Adjacent Channel Power - dBc VI/Qin - I/Q Input Amplitude - mVP-P 100 200 500 100010 EVM, , A vs VI/Qin (at VCC = 2.7 V) Δφ Δ ΔφΔ EVM - Error Vector Magnitude - %rms - Phase Error - deg. A - Magnitude Error -%rms ΔφΔ EVM - Error Vector Magnitude - %rms - Phase Error - deg. A - Magnitude Error -%rmsΔφΔ EVM - Error Vector Magnitude - %rms - Phase Error - deg. A - Magnitude Error -%rms VI/Qin - I/Q Input Amplitude - mVP-P 100 200 500 100010 EVM, , A vs VI/Qin (at VCC = 3.0 V) Δφ Δ VI/Qin - I/Q Input Amplitude - mVP-P 100 200 500 100010 EVM, , A vs VI/Qin (at VCC = 3.6 V) Δφ Δ VI/Qin - I/Q Input Amplitude - mVP-P MDO Pattern: PN9 Single ended Input MDO Pattern: PN9 Single ended Input MDO Pattern: PN9 Single ended Input MDO Pattern: PN9 Single ended Input MDO Pattern: PN9 Single ended Input MDO Pattern: PN9 Single ended Input Δ Δφ Δφ Δφ Δ Δ Δ Δ Δ Δ Δ Δ Discontinued Product

Data Sheet P11487EJ2V0DS0024 µµµµPC8126GR TYPICAL SINE WAVE MODULATION OUTPUT SPECTRUM <PDC> 42kbps, RNYQ = 0.5, MOD Pattern [000] TYPICAL π/4DQPSK MODULATION OUTPUT SPECTRUM <PDC> 42kbps, RNYQ = 0.5, MOD Pattern [PN9 ] TRACE A: Ch1 Spectrum VI/Qin= 500 mVP-P (Single ended Input) A Marker dBm LogMag dB /div –100 dBm Center: 948 MHz 948 002 625. 0 Hz –9. 277 dBm IM3 (I/Q) ImR LoL ATT 0 dBREF –10. 0 dB 10 dB/ CENTER 948. 00000 MHz No. 1: No. 2: No. 3: No. 4: No. 5: 0 Hz –50. 0 kHz –100. 0 kHz 50. 0 kHz 100. 0 kHz 0. 00 dB –64. 50 dB –77. 00 dB –64. 75 dB –77. 00 dB SPAN 500 kHz RBW 3 kHz VBW 3 kHz SWP 5. 0 s 2 4 3 5 αα Span: 50 kHz Discontinued Product

Data Sheet P11487EJ2V0DS00 25 µµµµPC8126GR MOD OUTPUT (15 pin) IMPEDANCE VCC = VPS = 2.7 V VCC = VPS = 3.6 V VCC = VPS = 3.0 V MAEKER 1

948 MHz

1 : 49.039 Ω –21.127 Ω 7.9465pF 948. 000 000 MHz START 500. 000 000 MHz STOP 1 500. 000 000 MHz VSWR 2:1 MAEKER 1 1 : 49. 121 Ω –22.845 Ω 7.3486 pF 948. 000 000 pF START 500. 000 000 MHz STOP 1 500. 000 000 MHz VSWR 2:1 MAEKER 1 1 : 49. 783 Ω –22.645 Ω 7.1004 pF 948. 000 000 MHz START 500. 000 000 MHz STOP 1 500. 000 000 MHz VSWR 2:1 Discontinued Product

Data Sheet P11487EJ2V0DS0026 µµµµPC8126GR STANDARD TYPICAL CHARACTERISTICS <Pre-Mixer> Test Circuit 3, TA = +25 °C, VCC 1 = 3.0 V, Vps2 = 3.0 V, fIFin = 135 MHz, PIFin = −12 dBm, fRFin = 813 MHz, PRFin = −11 dBm, fMIXout = 948 MHz 7.5 2.5 ICC (MIX) - Pre-Mix. Circuit Current - mA VCC 1 - Pre-Mix. Supply Voltage - V No input signal TA = +80 °C TA = +25 °C TA = –30 °C ICC (MIX) vs VCC 1 No input signal TA = +80 °C TA = +25 °C TA = –30 °C ICC (MIX) - Pre-Mix. Circuit Current - mA Vps2 - Pre-Mix. Supply Voltage - V ICC (MIX) vs Vps2 Discontinued Product

Data Sheet P11487EJ2V0DS00 27 µµµµPC8126GR P(fIF × 7) - fIF-Lo × 7 Harmonics - dBc –20 –40 –60 –80 –100 –120 100 120 Pout(MIX) P(fIF× 7) P(fIF× 7) P(fIF× 7) RFL RFL RFL ImL ImL ImL P(fIF× 7) P(fIF× 7) P(fIF× 7) RFL RFL RFL ImL ImL ImL Pout(MIX) Pout(MIX) Pout(MIX) Pout(MIX) Pout(MIX) POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PIF-Loin - Pre-Mix. IF Input Power - dBm P(fIF × 7) - fIF-Lo × 7 Harmonics - dBc –20 –40 –60 –80 –100 –120 100 120 POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PIF-Loin - Pre-Mix. IF Input Power - dBm P(fIF × 7) - fIF-Lo × 7 Harmonics - dBc –20 –40 –60 –80 –100 –120 100 120 POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PIF-Loin - Pre-Mix. IF Input Power - dBm P(fIF × 7) - fIF-Lo × 7 Harmonics - dBc –20 –40 –60 –80 –100 –120 100 120 POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PIF-Loin - Pre-Mix. IF Input Power - dBm P(fIF × 7) - fIF-Lo × 7 Harmonics - dBc –20 –40 –60 –80 –100 –120 100 120 POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PIF-Loin - Pre-Mix. IF Input Power - dBm P(fIF × 7) - fIF-Lo × 7 Harmonics - dBc –20 –40 –60 –80 –100 –120 100 120 POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PIF-Loin - Pre-Mix. IF Input Power - dBm ×Pout (MIX), RFL, ImL, P(fIF 7) vs PIF-Loin (at VCC = 2.7 V, TA = –30 °C) ×Pout (MIX), RFL, ImL, P(fIF 7) vs PIF-Loin (at VCC = 3.0 V, TA = –30 °C) ×Pout (MIX), RFL, ImL, P(fIF 7) vs PIF-Loin (at VCC = 3.6 V, TA = –30 °C) ×Pout (MIX), RFL, ImL, P(fIF 7) vs PIF-Loin (at VCC = 2.7 V, TA = +25 °C) ×Pout (MIX), RFL, ImL, P(fIF 7) vs PIF-Loin (at VCC = 3.0 V, TA = +25 °C) ×Pout (MIX), RFL, ImL, P(fIF 7) vs PIF-Loin (at VCC = 3.6 V, TA = +25 °C) Discontinued Product

Data Sheet P11487EJ2V0DS0028 µµµµPC8126GR P(fIF× 7) P(fIF× 7) P(fIF× 7) Pout(MIX) RFL RFL RFL ImL ImL ImL RFL ImL RFL ImL RFL ImL Pout(MIX) Pout(MIX) Pout(MIX) Pout(MIX) Pout(MIX) P(fIF × 7) - fIF - Lo × 7 Harmonics - dBc –20 –40 –60 –80 –100 –120 100 120 POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PIF-Loin - Pre-Mix. IF Input Power - dBm P(fIF × 7) - fIF - Lo × 7 Harmonics - dBc –20 –40 –60 –80 –100 –120 100 120 POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PIF-Loin - Pre-Mix. IF Input Power - dBm P(fIF × 7) - fIF - Lo × 7 Harmonics - dBc –20 –40 –60 –80 –100 –120 100 120 POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PIF-Loin - Pre-Mix. IF Input Power - dBm –20 –40 –60 –80 –100 –120 POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PIF-Loin - Pre-Mix. RF Input Power - dBm –20 –40 –60 –80 –100 –120 POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PIF-Loin - Pre-Mix. RF Input Power - dBm –20 –40 –60 –80 –100 –120 POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PIF-Loin - Pre-Mix. RF Input Power - dBm ×Pout (MIX), RFL, ImL, P(fIF 7) vs PIF-Loin (at VCC = 2.7 V, TA = +80 °C) ×Pout (MIX), RFL, ImL, P(fIF 7) vs PIF-Loin (at VCC = 3.0 V, TA = +80 °C) ×Pout (MIX), RFL, ImL, P(fIF 7) vs PIF-Loin (at VCC = 3.6 V, TA = +80 °C) Pout (MIX), RFL, ImL vs PRF-Loin (at VCC = 2.7 V, TA = –30 °C) Pout (MIX), RFL, ImL vs PRF-Loin (at VCC = 3.0 V, TA = –30 °C) Pout (MIX), RFL, ImL vs PRF-Loin (at VCC = 3.6 V, TA = –30 °C) Discontinued Product

Data Sheet P11487EJ2V0DS00 29 µµµµPC8126GR –4–12–20 RFL ImL RFL ImL RFL ImL RFL ImL RFL ImL RFL ImL Pout (MIX) Pout (MIX) Pout (MIX) Pout (MIX) Pout (MIX) Pout (MIX) –20 –40 –60 –80 –100 –120 POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PRF-Loin - Pre-Mix. RF Input Power - dBm –4–12–20 –20 –40 –60 –80 –100 –120 POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PRF-Loin - Pre-Mix. RF Input Power - dBm –4–12–20 –20 –40 –60 –80 –100 –120 POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PRF-Loin - Pre-Mix. RF Input Power - dBm –4–12–20 –20 –40 –60 –80 –100 –120 (at V CC = 2.7 V, TA = +80 °C) POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PRF-Loin - Pre-Mix. RF Input Power - dBm –4–12–20 –20 –40 –60 –80 –100 –120 (at V CC = 3.0 V, TA = +80 °C) POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PRF-Loin - Pre-Mix. RF Input Power - dBm –4–12–20 –20 –40 –60 –80 –100 –120 (at V CC = 3.6 V, TA = +80 °C) POUT (MIX) - Pre-Mix. Output Power - dBc RFL - RF Local Oscillator Leakage - dBm ImL - Image Leakage - dBm PRF-Loin - Pre-Mix. RF Input Power - dBm Pout (MIX), RFL, ImL vs PRF-Loin (at VCC = 2.7 V, TA = +25 °C) Pout (MIX), RFL, ImL vs P RF-Loin (at VCC = 3.0 V, TA = +25 °C) Pout (MIX), RFL, ImL vs P RF-Loin (at VCC = 3.6 V, TA = +25 °C) Pout (MIX), RFL, ImL vs P RF-Loin Pout (MIX), RFL, ImL vs P RF-Loin Pout (MIX), RFL, ImL vs P RF-Loin Discontinued Product

Data Sheet P11487EJ2V0DS0030 µµµµPC8126GR Pout (MIX) Pout (MIX) Pout (MIX) Pout (MIX) Pout (MIX) Pout (MIX) –20 –40 –60 –80 –100 –120 900 950 1000 P out(MIX) vs fMIXout (at VCC = 2.7 V, TA = –30 °C) Pout(MIX) - Pre-Mix. Output Power - dBm fMIXout - Pre-Mix. Output Frequency - MHz –20 –40 –60 –80 –100 –120 900 950 1000 P out(MIX) vs fMIXout (at VCC = 3.0 V, TA = –30 °C) Pout(MIX) - Pre-Mix. Output Power - dBm fMIXout - Pre-Mix. Output Frequency - MHz –20 –40 –60 –80 –100 –120 900 950 1000 P out(MIX) vs fMIXout (at VCC = 3.6 V, TA = –30 °C) Pout(MIX) - Pre-Mix. Output Power - dBm fMIXout - Pre-Mix. Output Frequency - MHz –20 –40 –60 –80 –100 –120 900 950 1000 P out(MIX) vs fMIXout (at VCC = 2.7 V, TA = +25 °C) Pout(MIX) - Pre-Mix. Output Power - dBm fMIXout - Pre-Mix. Output Frequency - MHz –20 –40 –60 –80 –100 –120 900 950 1000 P out(MIX) vs fMIXout (at VCC = 3.0 V, TA = +25 °C) Pout(MIX) - Pre-Mix. Output Power - dBm fMIXout - Pre-Mix. Output Frequency - MHz –20 –40 –60 –80 –100 –120 900 950 1000 P out(MIX) vs fMIXout (at VCC = 3.6 V, TA = +25 °C) Pout(MIX) - Pre-Mix. Output Power - dBm fMIXout - Pre-Mix. Output Frequency - MHz Recommended operating range Recommended operating range Recommended operating range Recommended operating range Recommended operating range Recommended operating range Discontinued Product

Data Sheet P11487EJ2V0DS00 31 µµµµPC8126GR Pout (MIX) Pout (MIX) Pout (MIX) –20 –40 –60 –80 –100 –120 900 950 1000 P out(MIX) vs fMIXout (at VCC = 2.7 V, TA = +80 °C) Pout(MIX) - Pre-Mix. Output Power - dBm fMIXout - Pre-Mix. Output Frequency - MHz –20 –40 –60 –80 –100 –120 900 950 1000 P out(MIX) vs fMIXout (at VCC = 3.0 V, TA = +80 °C) Pout(MIX) - Pre-Mix. Output Power - dBm fMIXout - Pre-Mix. Output Frequency - MHz –20 –40 –60 –80 –100 –120 900 950 1000 P out(MIX) vs fMIXout (at VCC = 3.6 V, TA = +80 °C) Pout(MIX) - Pre-Mix. Output Power - dBm fMIXout - Pre-Mix. Output Frequency - MHz Recommended operating range Recommended operating range Recommended operating range Discontinued Product

Data Sheet P11487EJ2V0DS0032 µµµµPC8126GR TEST CIRCUIT 1 (Modulator+Pre-Mixer / In case of VI/Qin is single ended input) Signal Generator Spectrum Analyzer Voltage Source Voltage Source Voltage Source 20 19 18 17 16 15 14 13 12 11 1 2 3 4 5 6 7 8 9 10 Frequency Doubler PreMixer I/Q Signal Generator II b QQ b TFF I/Q Mixer I/Q Mixer 33 pF RFin 1000 pF 33 pF VCC 1Q Q b MODout 1000 pF Vps2IFin µ

0.22 Fµ µ

6.8 nH 22 nH 2 pF 6 pF 6 pF 2 pF 6.8 nH 6.8 nH 6.8 nH Filter VCC 2 Vps1 I IbVCC 1LOin Mix out BPF 0.22 F 1000 pF 0.22 F 100 pF Signal Generator RFout Discontinued Product

Data Sheet P11487EJ2V0DS00 33 µµµµPC8126GR TEST CIRCUIT 2 (Modulator+Pre-Mixer / In case of VI/Qin is differential input) Signal Generator Spectrum Analyzer Voltage Source Voltage Source Voltage Source 20 19 18 17 16 15 14 13 12 11 1 2 3 4 5 6 7 8 9 10 Frequency Doubler PreMixer II b QQ b TFF I/Q Mixer I/Q Mixer 33 pF RFin 1000 pF 33 pF VCC 1Q Q b 1000 pF Vps2IFin µ 0.22 Fµ 100 pF 22 nH 15 nH 2 pF1000 pF 100 pF300 µ33 pF 33 pF 6.8 nH 22 nH 2 pF 10 pF 100 K 10 pF

22 K22 K

2 pF 6.8 nH 6.8 nH 6.8 nH Filter VCC 2 Vps1 I IbVCC 1LOin Mix out BPF I/Q Signal Generator 0.22 F 100 pF 0.22 F 1000 pF Signal Generator RFout Discontinued Product

Data Sheet P11487EJ2V0DS0034 µµµµPC8126GR TEST CIRCUIT 3 (Pre-Mixer) Signal Generator Voltage Source Voltage Source 20 19 18 17 16 15 14 13 12 11 1 2 3 4 5 6 7 8 9 10 Frequency Doubler PreMixer TFF I/Q Mixer I/Q Mixer 33 pF RFin V CC 3Q Q bMODoutVps2IFin 1000 pF 0.22 Fµ 100 pF 22 nH 15 nH 2 pF VCC 1 Vps1 I IbVCC 2LOimb LOin Mix out BPF Spectrum Analyzer 1000 pF Signal Generator Discontinued Product

Data Sheet P11487EJ2V0DS00 35 µµµµPC8126GR APPLICATION CIRCUIT EXAMPLE

3 GND

4 Loinb

5 Loin

7 Vps1

8 GND

0.22 F 0.22 Fµ µ 300 Ω 22 nH 22 nH 6.8 nH 1000 pF 100 pF 0.22 Fµ 100 pF 33 pF 1000 pF 1000 pF 33 pF 51 Ω 51 ΩFilter 100 pF 15 nH MIXout VCC 1 Note 1 Note 2 TABLE 1 : Example of filter connect between pin2 and pin5 Kind of filter BPF Circuit 6.8 nH6 pF 6 pF 6.8 nH 6.8 nH 2 pF Zout = 50 ΩZin = 50 Ω fo = 948 MHz Insertion Loss = 3.5 dB Notes 1. 50 Ω matching circuit at fMIXout = 948 MHz. In case of using NEC’s evaluation board. 2. 50 Ω matching circuit at fLoin = 948 MHz. In case of using NEC’s evaluation board. Discontinued Product

Data Sheet P11487EJ2V0DS0036 µµµµPC8126GR EXAMPLE OF TEST CIRCUIT 1 ASSEMBLED ON EVALUATION BOARD 33 pF 100 pF 1000 pF0.22 Fµ VCC 3 Vps2 1000 pF 1000 pF 100 pF 51 Ω 51 Ω 33 pF 0.22 F 0.22 F 6.8 nH 300 Ω 33 pF 33 pF 15 nHVCC 1 22 nH6.8 nH2 pF 2 pF6.8 nH6.8 nH6 pF 6 pF 2 pF 22 nH 100 pF 1000 pF Vps1 VCC 2 Ib Qb µ µ 1. Double-sided patterning with 35 mm thick copper on polyhimid board. 2. GND pattern on backside. 3. solder coating over patterns. 4. , indicate through-holes. Notes NOTICE The test circuits and board pattern on data sheet are for performance evaluation use only. In case of actual design-in, matching circuit should be determined using S-parameter of desired frequency in accordance to actual mounting pattern. Discontinued Product

Data Sheet P11487EJ2V0DS00 37 µµµµPC8126GR PACKAGE DIMENSIONS

20 PIN PLASTIC SSOP (225 mil) (UNIT: mm)

1.8 MAX. +7˚ –3˚ 0.65 0.10 M 0.15 0.5 ± 0.2 11 0 6.7 ± 0.3 1.5 ± 0.1 0.1 ± 0.1 0.22 +0.10 –0.05 0.575 MAX. 0.15 +0.10 –0.05 6.4 ± 0.2 NOTE Each lead centerline is located within 0.10 mm of its true position (T.P.) at maximum material condition. Discontinued Product

Data Sheet P11487EJ2V0DS0038 µµµµPC8126GR NOTE ON CORRECT USE (1) Observe precautions for handling because of electrostatic sensitive devices. (2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent undesired oscillation). (3) Keep the track length of the ground pins as short as possible. (4) Connect a bypass capacitor (e.x. 1 000 pF) to the V CC pin. RECOMMENDED SOLDERING CONDITIONS This product should be soldered in the following recommended conditions. Other soldering method and conditions than the recommended conditions are to be consulted with sales representatives. µµµµPC8126GR Soldering process Soldering conditions Symbol Infrared ray reflow Peak package’s surface temperature: 235 °C or below, Reflow time: 30 seconds or below (210 °C or higher) Number of reflow process: 2, Exposure limit Note : None IR35-00-2 VPS Peak package’s surface temperature: 215 °C or below, Reflow time: 40 seconds or below (200 °C or higher ) Number of reflow process: 2, Exposure limit Note : None VP15-00-2 Wave soldering Solder temperature: 260 °C or below, Flow time: 10 seconds or below, Number of flow process: 1, Exposure limit Note : None WS60-00-1 Partial heating method Terminal temperature: 300 °C or below, Flow time: 3 seconds/pin or below, Exposure limit Note : None Note Exposure limit before soldering after dry-pack package is opened. Storage conditions: 25 °C and relative humidity at 65 % or less. Caution Apply only a single process at once, except for ‘‘Partial heating method’’. For details of recommended soldering conditions for surface mounting, refer to information document SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E). Discontinued Product

Data Sheet P11487EJ2V0DS00 39 µµµµPC8126GR [MEMO] Discontinued Product

µµµµPC8126GR

  • The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
  • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document.
  • NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others.
  • Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information.
  • While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features.
  • NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. M7 98. 8 Discontinued Product