UPC8116GR RENESAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 18
Technical content
To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.
- All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipmen t; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
BIPOLAR ANALOG INTEGRATED CIRCUIT µµµµPC8116GR
500 MHz, AM/ASK RECEIVER IC
Document No. P12361EJ3V0DS00 (3rd edition) Date Published April 2000 N CP(K) Printed in Japan The mark shows major revised points. © 1997, 2000
DESCRIPTION
The µPC8116GR is a Silicon monolithic IC designed for AM/ASK receiver. This IC consists of mixer, oscillator, IF amplifier, Limitter amplifier, OP Amp., and builts in power save function and RSSI function. The 20-pin plastic SSOP package is suitable for high-density surface mounting. This IC is manufactured using NEC’s 20 GHz fT NESAT TM III silicon bipolar process. This process uses direct silicon nitride passivation film and gold electrodes. These materials can protect the chip surface from pollution and prevent corrosion/migration. Thus, this IC realizes excellent performance, uniformity and reliability.
FEATURES
- Supply voltage : V CC = 2.7 to 5.5 V
- Low current consumption : I CC = 4.1 mA TYP.@VCC = VPS = 3.0 V
- Wideband response : f RF = 100 to 500 MHz
- Power save function : I CCPS = 1 µA MAX. @V CC = 3.0 V, PS = 0 V
- High-density surface mounting : 20-pin plastic SSOP (6.7 × 4.4 × 1.5 mm)
ORDERING INFORMATION
Part Number Package Supplying Form µPC8116GR-E1 20-pin plastic SSOP (5.72 mm (225)) Embossed tape 12 mm wide. Pin 1 is in tape pull-out direction. QTY 2.5 kpcs/reel. Remark To order evaluation samples, please contact your local NEC sales office. (Part number for sample order: µPC8116GR) Caution Electro-static sensitive devices The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Discontinued Product
Data Sheet P12361EJ3V0DS002 µµµµPC8116GR PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM (Top View) 1RF in 2MIXout 3IF Ampin 4BYPASS + 5BYPASS − 6RSSIout 7VCC 8GND 9OP Amp + 11OP Amp − GND OSC-C OSC-E Power Save IF out GND LIM in BYPASS + BYPASS − OP Amp out IF Amp. OP Amp. LIMITTER Amp. RSSI P/S Discontinued Product
Data Sheet P12361EJ3V0DS00 3 µµµµPC8116GR ABSOLUTE MAXIMUM RATINGS Parameter Symbol Conditions Ratings Unit Supply Voltage V CC TA = +25°C6 . 0 V Power Dissipation P D Mounted on double-sided copper clad 50 × 50 × 1.6 mm epoxy glass PWB at TA = +85°C 430 mW Operating Ambient Temperature T A −40 to +85 °C Storage Temperature T stg −55 to +150 °C RECOMMENDED OPERATING RANGE Parameter Symbol MIN. TYP. MAX. Unit Supply Voltage V CC 2.7 3.0 5.5 V Operating Ambient Temperature T A −40 +25 +85 °C ELECTRICAL CHARACTERISTICS (Unless otherwise specified, TA = +25°°°°C, VCC = VP/S = 3 V) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit Total Block Circuit Current I CC no signals Note 1 2.6 4.1 5.7 mA RSSI Sensitivity RSSI sen fRF = 315 MHz, fOSC = 304.3 MHz, POSC = −10 dBm, Δ VRSSI ≥ 3 mV/dB Note 1 −− 95 −90 dBm Powersave Current I PS 17 pin = GND Note 1 −− 1.0 µA Mixer Block RF Input Band Width BW RF fIF = 10.7 MHz, fRF > fOSC , −3 dB down Note 2 100 − 500 MHz LO Input Band Width BW LO fIF = 10.7 MHz, fRF > fOSC , −3 dB down Note 2 100 − 500 MHz Mixer Gain G MIX fRF = 315 MHz, PRF = −50 dBm, fOSC = 304.3MHz, Posc = −10 dBm, Input:LC matching Note 1 81 1 1 4 d B IF Amp. Block IF Output Band Width BW IF Pin = −80 dBm, −3dB down Note 2 0.3 − 15 MHz OP Amp. Block OP Amp. Band Width BW OP Pin = −50 dBm, −3dB down Note 2 1 −− MHz OP Amp. Gain G OP fin = 200 kHz, Pin = −50 dBm Note 2 50 57 − dB Notes 1. By test circuit 1 2. By test circuit 2 Discontinued Product
Data Sheet P12361EJ3V0DS004 µµµµPC8116GR STANDARD CHARACTERISTICS (Unless otherwise specified, TA = +25°°°°C, VCC = VP/S = 3.0 V) Parameter Symbol Test conditions Value for reference Unit IF Amplifier Gain G IF fin = 10.7 MHz, Pin = −100 dBm, Input:LC Matching Note 55 dB RSSI Linearity ΔRSSI/ ΔPRF fRF = 315 MHz, fOSC = 304.3 MHz, POSC = −10 dBm, PRF = −30 to −90 dBm Note ±3d B LO to RF Isolation LO-RF ISL fOSC = 304.3 MHz/−10 dBm Note −50 dBm RF to LO Isolation RF-LO ISL fRF = 315 MHz/−30 dBm Note −50 dBm Note By test circuit 1 Discontinued Product
Data Sheet P12361EJ3V0DS00 5 µµµµPC8116GR PIN EXPLANATION Pin No. Pin Name Pin Voltage (V) Function and Application Internal Equivalent Circuit 1R F in 1.95 Input pin of RF Mixer. 2M I X out 2.1 Output pin of Mixer. This pin is assigned for emitter follower output with Low-impedance. 3I F A m pin 2.38 Input pin of IF Amplifier.
4 BYPASS
2.38 Bypass pin for IF Amplifier. Capacitor for filter should be connected between 4 pin and 5 pin. 5 BYPASS − 2.38 6 RSSI out 0.9 RSSI signal output pin. 7V CC − Supply voltage pin. 8G N D − Ground pin of OP Amp Block.
9 OP Amp
2.1 Input pin of OP Amp. In case of single input, 9 pin or 10 pin should be grounded through capacitor. 10 OP Amp − 2.1 1 k 810 Discontinued Product
Data Sheet P12361EJ3V0DS006 µµµµPC8116GR Pin No. Pin Name Pin Voltage (V) Function and Application Internal Equivalent Circuit 11 OP Amp out 0.77 Output pin of OP Amp. 1 k 12 BYPASS − 2.38 Bypass pin for OP Amp. Capacitor for filter should be connected between 12 pin and 13 pin.
13 BYPASS
2.38 14 LIMin 2.38 Input pin of Limitter Amplifier. 15 GND − Ground pin of Limitter Amp., RSSI, and regulator. 16 IF out 1.55 IF signal output pin. Generally, Crystal filter is connected between 16 pin and 14 pin. 230
17 Power
0 to 3.0 Power save control pin can be controlled ON/SLEEP state with bias as follows; 18 OSC-E 1.31 Oscillator signal input pins. Oscillator circuit should be connected between 18 pin and 19 pin. 19 OSC-C 3.0
20 GND − Ground pin of Mixer, IF Amplifier, and
Oscillator. VCC VP/S (V) STATE VCC ON GND SLEEP Discontinued Product
Data Sheet P12361EJ3V0DS00 7 µµµµPC8116GR TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = +25°°°°C, VCC = 3.0 V) CIRCUIT CURRENT vs. SUPPLY VOLTAGE Supply Voltage VCC (V) Circuit Current Icc (mA) 00123456 no signals TA = +25°C TA = −40°C −10 OUPTUT POWER vs. INPUT POWER Input Power Pin (dBm) Outout Power Pout (dBm) VCC = 3.0 V fRF = 315 MHz fOSC = 304.3 MHz POSC = −10 dBm Input: LC matching −20 −30 −40 −50 −60 −70 −80 −60 −40 −20 0 OUTPUT POWER vs. OSC INPUT POWER OSC Input Power POSCin (dBm) Output Power Pout (dBm) −30 −40 −50 −60 −70 −80 −90 GAIN vs. OP AMP. INPUT FREQUNECY OP Amp. Input Frequency fin (MHz) Gain (dB) VCC = 3.0 V fRF = 315 MHz fOSC = 304.3 MHz PRF = −50 dBm Input: LC Matching 0.01 0.1 1 10 VCC = 3.0 V Pin = −50 dBm TA = +85°C Remark The graphs indicate nominal characteristics. Discontinued Product
Data Sheet P12361EJ3V0DS008 µµµµPC8116GR STANDARD CHARACTERISTICS (Unless otherwise specified, TA = +25°°°°C) 2.8 RSSI VOLTAGE vs. INPUT POWER Input Power Pin (dBm) Pin = −60 dBm OP Amplifier Output Pin = −90 dBm RSSI Voltage VRSSI (V) 2.6 2.4 2.2 2.0−120 −100 −80 −60 −40 −20 0 VCC = 3.0 V fRF = 315 MHz fOSC = 304.3 MHz POSC = −10 dBm Input:LC Matching 4.8 RSSI VOLTAGE vs. INPUT POWER Input Power Pin (dBm) RSSI Voltage VRSSI (V) 4.6 4.4 4.2 4.0−120 −100 −80 −60 −40 −20 0 VCC = 5.0 V fRF = 315 MHz fOSC = 304.3 MHz POSC = −10 dBm Input:LC Matching fRF = 315 MHz fOSC = 304.3 MHz AM : 1 kHz, 90% VCC = 3.0 V 500 mV/DIV 200 sec/DIV Test Conditions: µ Remark The graphs indicate nominal characteristics. Discontinued Product
Data Sheet P12361EJ3V0DS00 9 µµµµPC8116GR TEST CIRCUIT1 10 nF 10 nF 100 nF 3.3 nF 3.3 nF3.3 nF 39 n 270 2 pF 56 pF 330 3.3 nF 100 nF 1.8 nF IF Amp. OP Amp. LIMITTER Amp. RSSI P/S 10 k 1 Fµ 1.8 nF 3.3 nF3.3 nF 3.3 nF 3.3 nF OP Amp OUT 330 1.8 nF330 pF 330 pF 1 F µ SG1 100 kΩ 100 kΩ Band Pass filter
10.7 MHz
V CC10.7 MHz VCC V Remarks 1 . Measured by High-impedance Probe (1 MHz, 1.5pF) 2. 17 pin: GND, 11 pin: OPEN in case of measurement of powersave current TEST CIRCUIT2 100 nF 3.3 nF 3.3 nF 100 nF 1000 pF 3.3 nF 100 nF IF Amp. OP Amp. LIMITTER Amp. RSSI P/S 100 nF 1.8 nF 3.3 nF 3.3 nF 3.3 nF 100 nF1000 pF 1 Fµ SG1 SG3 SG4 100 k 100 k Spectrum Analyzer Oscilloscope Spectrum Analyzer Power Save SG2 V CC VCC Remark Measured by High-impedance Probe (1 MHz, 1.5pF) Discontinued Product
Data Sheet P12361EJ3V0DS0010 µµµµPC8116GR APPLICATION CIRCUIT EXAMPLE (@f RF = 433.6 MHz) 3.3 nF 200 nF 100 nF 3.3 nF 3.3 nF 1.4 to 3.0 pF 56 pF 3.3 nF 200 nF IF Amp. OP Amp. LIMITTER Amp. RSSI P/S 3.3 nF 3.3 nF 3.3 nF OP Amp OUT 561 nF 100 nF 7 pF 7 pF 47 nH 100 nF 1000 pF 100 k 100 k 10 kΩ Crystal filter V CC 10.7 MHz RSSI VCC 23 nH10 pF RF IN 1.2 kSAW 423.2 M The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. Discontinued Product
Data Sheet P12361EJ3V0DS00 11 µµµµPC8116GR ILLUSTRATION OF THE APPLICATION CIRCUIT ASSEMBLED ON EVALUATION BOARD /,/, /,/, /,/, /,/, /,/, /,/, /,/, /,/, /,/, /,/,/,/, /,/,/, /,/,/, /,/, /,/,/, /,/, /,/,/,/, /,/, /,/,/, 3.3 n 3.3 n3.3 n23 n 10.7 M BPF 56 p 10 p 100 n 47 n 3.3 n 3.3 n 3.3 n 3.3 n 100 n 100 k 100 k 10 k 100 n 1 n 56 10.7 M BPF 1.4 to 3 p SAM 1.2 k 7 p 7 p 1000 p 200 n 200 n VCC VCC Power Save Notes *1) *2) *3) *4) shows through holes pattern should be removed on this application shows short circuited strip for ground Backside is GND pattern /,/, /,/, Discontinued Product
Data Sheet P12361EJ3V0DS0012 µµµµPC8116GR PACKAGE DIMENSIONS 20 PIN PLASTIC SSOP (5.72 mm (225)) (UNIT: mm) detail of lead end 1.8 MAX. +7˚ –3˚ 0.65 0.10 M 0.15 0.5 ± 0.2 11 0 6.7 ± 0.3 1.5 ± 0.1 0.1 ± 0.1 0.22 +0.10 –0.05 0.575 MAX. 0.15 +0.10 –0.05 6.4 ± 0.2 NOTE Each lead centerline is located within 0.10 mm of its true position (T.P.) at maximum material condition. Discontinued Product
Data Sheet P12361EJ3V0DS00 13 µµµµPC8116GR NOTE ON CORRECT USE (1) Observe precautions for handling because of electro-static sensitive devices. (2) Form a ground pattern as wide as possible to minimize ground impedance (to prevent abnormal oscillation). (3) Keep the track length of the ground pins as short as possible. (4) Connect a bypass capacitor (example: 1 000 pF) to the V CC pin. (5) Frequency signal input/output pins must be each coupled with capacitor for DC cut. RECOMMENDED SOLDERING CONDITIONS This product should be soldered under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your NEC sales representative. Soldering Method Soldering Conditions Recommended Condition Symbol Infrared Reflow Package peak temperature: 235°C or below Time: 30 seconds or less (at 210°C) Count: 3, Exposure limit: None Note IR35-00-3 Time: 40 seconds or less (at 200°C) Count: 3, Exposure limit: None Note VP15-00-3 Wave Soldering Soldering bath temperature: 260°C or below Time: 10 seconds or less Count: 1, Exposure limit: None Note WS60-00-1 Partial Heating Pin temperature: 300°C Time: 3 seconds or less (per side of device) Exposure limit: None Note Note After opening the dry pack, keep it in a place below 25°C and 65% RH for the allowable storage period. Caution Do not use different soldering methods together (except for partial heating). For details of recommended soldering conditions for surface mounting, refer to information document SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E). Discontinued Product
Data Sheet P12361EJ3V0DS0014 µµµµPC8116GR [MEMO] Discontinued Product
Data Sheet P12361EJ3V0DS00 15 µµµµPC8116GR [MEMO] Discontinued Product
µµµµPC8116GR NESAT (NEC Silicon Advanced Technology) is a trademark of NEC Corporation.
- The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
- No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document.
- NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others.
- Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information.
- While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features.
- NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. M7 98. 8 Discontinued Product