UPC8106T_00 NEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

SYMBOLS PARAMETERS AND CONDITIONS UNITS MIN TYP MAX ICC Circuit Current, V PS ≥ 2.5 V mA 4.5 9 13.5 VPS = 0 V µA1 0 CG Conversion Gain 1,f RF = 900 MHz dB 7 10 13 fRF = 1.9 GHz dB 4 7 10 NF SSB Noise Figure, f RF = 900 MHz dB 8.5 PSAT Saturated Output Power2,f RF = 900 MHz dBm -4 -2 fRF = 1.9 GHz dBm -6.5 -4 OIP3 Output 3rd Order Intercept Point3,fRF = 900, 900.4 MHz dBm +5.5 fRF = 1.9, 1.9004 GHz dBm +2.0 TPS Power Save Response Time, V P/S : GND → VCC µs 2.0 VP/S : VCC → GND µs 2.0 R TH (J-A) Thermal Resistance (Junction to Ambient) Free Air °C/W 620 Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB °C/W 230

FEATURES

3 V, SILICON MMIC

  • WIDE BAND OPERATION: IF Input: 3 dB BW: 50 ~ 400 MHz Typical RF Output: 3 dB BW: 0.1~2 GHz Typical
  • LOW VOLTAGE OPERATION: 2.7 V Minimum
  • POWER SAVE FUNCTION
  • SUPER SMALL PACKAGE
  • TAPE AND REEL PACKAGING OPTION AVAILABLE INTERNAL BLOCK DIAGRAM

DESCRIPTION

The UPC8106T is an L-Band Frequency Up-Converter manu- factured using the NESAT III MMIC process. The UPC8106T was designed for low distortion. Operation from a 3 volt supply voltage makes this device ideal for handheld cellular, PCN and wireless LAN applications. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. ELECTRICAL CHARACTERISTICS (TA = 25°C, VCC = 3 V, fIF = 240 MHz, PLO = -5 dBm, VPS ≥ 2.5V) UPC8106T Notes: 1. PIF = -30 dBm. 2. PIF = -10 dBm. 3. fIF1 = 240.0 MHz, fIF2 = 240.4 MHz California Eastern Laboratories RF Output Power Save GNDVCCLO Input IF Input

RF Output Frequency, fRF (GHz) Conversion Gain, CG (dB) CONVERSION GAIN vs. OUTPUT FREQUENCY ABSOLUTE MAXIMUM RATINGS 1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS VCC Supply Voltage V 6.0 VPS Power Save Voltage V 6.0 PT Total Power Dissipation2 mW 280 TOP Operating Temperature °C -40 to +85 TSTG Storage Temperature °C -55 to +150 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB (TA = +85°C). SYMBOLS PARAMETERS UNITS MIN TYP MAX VCC Supply Voltage V 2.7 3.0 5.5 TOP Operating Temperature °C -40 +25 +85 PLO LO Input Level dBm -10 -5 0 RECOMMENDED OPERATING CONDITIONS TEST CIRCUIT Recommended Values 900 MHz 1.9 GHz C 1.0 pF 1.8 pF L 8.2 nH 18 nH CURRENT vs. VOLTAGE CURRENT vs. TEMPERATURE Current, I CC (mA) Current, I CC (mA) Current, I CC (mA) Supply Voltage, VCC (V) Temperature ( °C) CURRENT vs. POWER SAVE PIN INPUT VOLTAGE Power Save Voltage, VPS (V) TYPICAL PERFORMANCE CURVES (TA = 25°C unless otherwise specified) UPC8106T C IFIN VCC PS RF OUT LO IN GND 1000 pF 100 pF 100 pF V CC L -40 -20 0 +20 +40 +60 +80 +100 VCC = VPS = 3.0 V 0 2 4 6 VCC = 5.5V VCC = 3.0V OUTPUT MATCHED AT 900 MH Z OUTPUT MATCHED AT 1900 MH Z 0 2 4 6 8 UPC8106T VCC = VPS

TYPICAL PERFORMANCE CURVES (TA = 25°C) CONVERSION GAIN vs. VOLTAGE AND FREQUENCY CONVERSION GAIN vs. INPUT LEVEL AT RF = 900 MHz Supply Voltage, VCC (V) Conversion Gain, CG (dB) Conversion Gain, CG (dB) LO Power Input, PLO (dBm) -20 -10 0 10 fRFOUT = 1.9 GHz fLOIN = 1.660 GHz VCC = VP/S = 3.0 V CONVERSION GAIN vs. INPUT LEVEL AT RF = 1.9 GHz LO Power Input, PLO (dBm) Conversion Gain, CG (dB) 2 4 6 VP/S = VCC fRFOUT = 900 MHZ fRFOUT = 1.9 MHZ -20 -10 0 10 fRFout = 900 MHZ fLO = 1140 MHZ VCC = VP/S 3.0V IF Input Level, PIFIN (dBm) RF Output Level, P RFOUT (dBm) IM3 AND RF OUTPUT LEVEL vs. IF INPUT LEVEL AND VOLTAGE AT RF = 900 MHz -20 -40 -60 -80 -40 -20 0 f IFIN1 = 240.0 MHz fIFIN2 = 240.4 MHz fLOIN = 1140.0 MHz VCC = VP/S PRFOUT IM3 VCC = 5.5 V VCC = 5.5 V VCC = 2.7 to 3.0 V VCC = 2.7 to 3.0 V IM3 AND RF OUTPUT LEVEL vs. IF INPUT LEVEL AND VOLTAGE AT RF = 1.9 GHz IF Input Level, PIFIN (dBm) RF Output Level, P RFOUT (dBm) -20 -40 -60 -80 -40 -20 0 f IFIN1 = 240.0 MHz fIFIN2 = 240.4 MHz fLOIN = 1.660 GHz VCC = VP/S PRFOUT IM3 VCC = 5.5 V VCC = 5.5 V VCC = 3.0 V VCC = 2.7 V VCC = 2.7 V -80 -60 -40 -20 -40 -30 -20 -10 0 10 fIFIN1 = 240.0 MHz fIFIN2 = 240.4 MHz fLOIN = 1140.0 MHz VCC = VP/S = 3.0 V PRFOUT IM3 TA = 85 °C TA = 85 °C TA = -40 °C TA = -40 °C TA = -40 °C TA = 85 °C TA = 25 °C IM3 AND RF OUTPUT LEVEL vs. IF INPUT LEVEL AND TEMPERATURE AT RF = 900 MHz RF Output Level, P RFOUT (dBm) IF Input Level, PIFIN (dBm)

Start 50 MHz Stop 1000 MHz 1: 154.64 Ω -494.41 Ω 1.2876 pF Marker 1 - 250 MHz Start 500 MHz Stop 2300 MHz UPC8106T TYPICAL PERFORMANCE CURVES (TA = 25°C) LO LEAKAGE AT RF AND IF PINS vs. LO INPUT FREQUENCY AT RF = 1.9 GHz IF Input Level, PIFIN (dBm) Third Order Intermod Level, IM 3 (dBm) RF Output Level, P RFOUT (dBm) LO Input Frequency, fLOIN (GHz) LO Leakage, LO L (dBm) IM3 AND RF OUTPUT LEVEL vs. IF INPUT LEVEL AND TEMPERATURE AT RF = 1.9 GHz -80 -60 -40 -20 -40 -30 -20 -10 0 10 fIFIN1 = 240.0 MHz fIFIN2 = 240.4 MHz fLOIN = 1.660 GHz VCC = VP/S = 3.0 V PRFOUT IM3 TA = 85 °C TA = 85 °C TA = -40 °C TA = -40 °C TA = -40 °C TA = 85 °C TA = 25 °C TA = 25 °C -50 01 2 3 -40 -30 -20 -10 LO to RF LO to IF fRFOUT = 1.9 GHz PLOIN = -5 dBm VCC = VP/S = 3.0 V S11 - LO INPUT PORT 2: 12.050 Ω -45.695 Ω 2.1780 pF 1: 13.961 Ω -76.158 Ω 1.8332 pF Marker 1 - 1.14 GHz Marker 2 - 1.66 GHz S 11 - RF OUTPUT PORT 2: 13.845 Ω -77.34 Ω 1.0850 pF 1: 20.633 Ω -144.74 Ω 1.2218 pF Marker 1 - 900 MHz Marker 2 - 1.9 GHz Start 0.3 MHz Stop 3000 MHz 2 2

(Top View) (Bottom View) OUTLINE DIMENSIONS (Units in mm) Note: All dimensions are typical unless otherwise specified. C2D +0.2 -0.32.8 1.5 +0.2 -0.1 3 4 1.9±0.2 -0.05 +0.100.3 0.13±0.11.1+0.2 -0.1 0 to 0.1 0.95 0.95 0.8 2.9±0.2 PACKAGE OUTLINE T06 3.10 1.0 MIN 1.0 MIN 0.95

0.5 MIN

RECOMMENDED P.C.B. LAYOUT (Units in mm) LEAD CONNECTIONS 1. IF INPUT 2. GND 3. LO INPUT 4. POWER SAVE 5. V CC 6. RF OUTPUT EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 7/25/2000DATA SUBJECT TO CHANGE WITHOUT NOTICE UPC8106T-E3 3K/Reel

ORDERING INFORMATION

Note: Embossed Tape, 8 mm wide, Pins 1, 2, 3 are in tape pull-out direction. PART NUMBER QTY