UPC8102T RENESAS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 22

Technical content

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.

  1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipmen t; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.

© 1996 DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT µPC8102T

DESCRIPTION

µPC8102T is a silicon monolisic integrated circuit designed as RF amplifier for 150 MHz to 330 MHz pager system. Due to 1 V supply voltage, this IC is suitable for low voltage pager system. The package is a 6 pin mini mold suitable for high-density surface mounting. This IC is manufactured using NEC’s 20 GHz fT NESAT TM III silicon bipolar process. This process uses silicon nitride passivation film and gold electrodes. These materials contribute excellent DC, AC performance. Thus, this process is utilized for 1 V voltage IC.

FEATURES

  • 1 V supply voltage: VCC = 0.9 V to 2.0 V
  • Low noise figure: 2.3 dBTYP. @ fin = 150 MHz (with external matching circuit to optimize NF)
  • Low current consumption: ICC = 0.5 mATYP. @ V CC = 1.0 V
  • Gain available frequency: fRF = 150 MHz to 330 MHz (with external matching circuit)
  • High-density surface mounting: 6 pin mini mold

ORDERING INFORMATION

PART NUMBER PACKAGE MARKING SUPPLYING FORM µPC8102T-E3 6 pin mini mold C2B Embossed tape 8 mm wide. Pin 1, 2, 3 face to perforation side of tape. QTY 3 kp/Reel * For evaluation sample order, please contact your local NEC sales office. (Order number: µPC8102T). PIN CONNECTIONS (Top View) (Bottom View) 1: INPUT 2: GND 3: OUTPUT 4: V CC 5: C1 6: C2 C2B Caution Electro-static sensitive devices RF AMPLIFIER IC FOR 150 MHz TO 330 MHz PAGER SYSTEM Document No. P11501EJ2V0DS00 (Previous No. ID-3534) Date Published May 1996 P Printed in Japan Discontinued Product

µPC8102T INTERNAL BLOCK DIAGRAM SYSTEM APPLICATION EXAMPLE AS PAGER

150 MHz to 330 MHz

µ µ Discontinued Product

µPC8102T PIN EXPLANATION SUPPLY PIN VOLTAGEPIN NO. NAME VOLTAGE (V) FUNCTION AND APPLICATION EQUIVALENT CIRCUIT (V) 1 INPUT — 0.75 RF signal input pin. This pin should be externally equipped with matching circuit in accord- ance with desired frequency.

2 GND 0 — This ground pin must be

connected to the system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. Track length should be kept as short as possible. 3 OUTPUT — Amplified signal output pin. This pin should be externally equipped with matching circuit in accordance with desired frequency. 4V CC 0.9 to 2.0 — Supply voltage pin. Connect bypass capacitor (eg 1000 pF) to minimize ground impedance. 5 C1 — 0.88 Ground with capacitance pin (eg 1000 pF). 6 C2 — 0.85 AC ground pin for output Note Pin voltage values are described at VCC = 1 V. C2 pin voltage must be applied through external matching inductor 26 54 Discontinued Product

µPC8102T ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL CONDITION RATINGS UNIT Supply Voltage V CC TA = +25 ˚C 2.2 V Power Dissipation P D Mounted on 50 × 50 × 1.6 mm double copper 280 mW clad epoxy glass PWB at TA = +85 ˚C Operating Temperature T opt –40 to +85 ˚C Storage Temperature T stg –55 to +150 ˚C RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL MIN. TYP. MAX. UNIT Supply Voltage V CC 0.9 1.0 2.0 V Operating Temperature T opt –40 +25 +85 ˚C Operating Frequency f opt 150 330 MHz Electric characteristic (TA = +25 ˚C, VCC = 1.0 V, ZS = ZL = 50 ΩΩΩΩΩ ) PARAMETER SYMBOL TEST CONDITIONS µPC8102T UNIT MIN. TYP. MAX. Circuit Current I CC No input signal, TEST CIRCUIT 1 0.30 0.5 0.65 mA Power Gain G P f = 280 MHz, TEST CIRCUIT 3 10.0 13.5 16.5 dB Output 3rd order OIP 3 f1 = 150.000 MHz, f2 = 150.025 MHz — –5 — dBm intercept point TEST CIRCUIT 2 Note External matching circuits should be attached to input and output pins. Standared characteristics for reference (Sample: ICC = 0.55 mA, Condition: TA = +25 ˚C, VCC = 1.0 V) PARAMETER SYMBOL CONDITIONS Reference value UNIT matched with 50 Ω Power Gain 1 G P 1 f = 150 MHz, TEST CIRCUIT 2 20.6 dB Noise Figure 1 NF1 3.6 dB Power Gain 2 G P 2 f = 280 MHz, TEST CIRCUIT 3 14.7 dB Noise Figure 2 NF2 4.0 dB Power Gain 3 G P 3 f = 330 MHz, TEST CIRCUIT 5 14.5 dB Noise Figure 3 NF3 4.1 dB matched to optimize NF Power Gain 4 G P 4 f = 150 MHz, TEST CIRCUIT 2 19.4 dB Noise Figure 4 NF4 2.3 dB Power Gain 5 G P 5 f = 280 MHz, TEST CIRCUIT 4 14.0 dB Noise Figure 5 NF5 2.9 dB Power Gain 6 G P 6 f = 330 MHz, TEST CIRCUIT 6 11.6 dB Noise Figure 6 NF6 3.1 dB Discontinued Product

µPC8102T TEST CIRCUIT 1 123 654 IN GND OUT C2 C1 V CC A Discontinued Product

µPC8102T TEST CIRCUIT 2 (150 MHz) <Matched with 50 ΩΩΩΩΩ or matched to optimize NF> 7.5 pF (Note) 47 kΩ 1 000 pF 84 nH pF 1 000 pF 1 000 pF 1 000 pF 10 pF68 nH 7.5 pF (Note) IN 213 564 GND OUT VCCC1C2 Note Matching can be adjusted with trimmer condenser. ILLUSTRATION OF THE TEST CIRCUIT 2 ASSEMBLED ON EVALUATION BOARD C2B OUT IN 7.5 pF 7.5 pF 68 nH 1 000 pF 10 pF 1 000 pF1 000 pF 1 000 pF 84 nH 1 000 pF10 pF 47kΩ Mounting direction VCC Note (*1) 35 × 42 × 0.4 mm double copper clad polyimide board (*2) Back side: GND pattern (*3) Solder plated on pattern (*4) : Through holes Discontinued Product

µPC8102T TEST CIRCUIT 3 (280 MHz) <Matched with 50 ΩΩΩΩΩ > 2 pF 47 kΩ 1 000 pF 23 nH 10 pF 1 000 pF 1 000 pF 1 000 pF2 pF 23 nH 0.5 pF IN 213 564 GND OUT VCCC1C2 0.5 pF 5 pF ILLUSTRATION OF THE TEST CIRCUIT 3 ASSEMBLED ON EVALUATION BOARD C2B 1 000 pF Mounting direction 1 000 pF VCC OUT IN PC8102/07 TYPE2 µ OUT IN 2 pF 5 pF 23 nH 1 000 pF 0.5 pF 2 pF 23 nH 10 pF 47 kΩ 1 000 pF 0.5 pF Note (*1) 35 × 42 × 0.4 mm double copper clad polyimide board (*2) Solder plated on pattern (*3) : Through holes Discontinued Product

µPC8102T TEST CIRCUIT 4 (280 MHz) <Matched to optimize NF> 2 pF 47 kΩ 1 000 pF 23 nH 10 pF 1 000 pF 1 000 pF 1 000 pF2 pF 27 nH IN 213 564 GND OUT VCCC1C2 10 pF ILLUSTRATION OF THE TEST CIRCUIT 4 ASSEMBLED ON EVALUATION BOARD C2B 1 000 pF Mounting direction 1 000 pF VCC OUT IN PC8102/07 TYPE2 µ OUT IN 2 pF 10 pF 27 nH 1 000 pF 0.5 pF 2 pF 23 nH 10 pF 47 kΩ 1 000 pF Note (*1) 35 × 42 × 0.4 mm double copper clad polyimide board (*2) Solder plated on pattern (*3) : Through holes Discontinued Product

µPC8102T TEST CIRCUIT 5 (330 MHz) <Matched with 50 ΩΩΩΩΩ > 1.5 pF 47 kΩ 1 000 pF 23 nH 5 pF 1 000 pF 1 000 pF 1 000 pF 17 nH 6 pF IN 213 564 GND OUT VCCC1C2 3 pF ILLUSTRATION ON THE TEST CIRCUIT 5 ASSEMBLED ON EVALUATION BOARD C2B 1 000 pF Mounting direction 1 000 pF VCC OUT IN PC8102/07 TYPE2 µ OUT IN 1.5 pF 17 nH 1 000 pF 3 pF 23 nH 5 pF 47 kΩ 1 000 pF 6 pF Note (*1) 35 × 42 × 0.4 mm double copper clad polyimide board (*2) Solder plated on pattern (*3) : Through holes Discontinued Product

µPC8102T TEST CIRCUIT 6 (330 MHz) <Matched to optimize NF> 2 pF 47 kΩ 1 000 pF 23 nH 6 pF 1 000 pF 1 000 pF 1 000 pF 23 nH 10 pF IN 213 564 GND OUT VCCC1C2 3 pF ILLUSTRATION ON THE TEST CIRCUIT 6 ASSEMBLED ON EVALUATION BOARD C2B 1 000 pF Mounting direction 1 000 pF VCC OUT IN PC8102/07 TYPE2 µ OUT IN 2 pF 23 nH 1 000 pF 3 pF 23 nH 6 pF 47 kΩ 1 000 pF 10 pF Note (*1) 35 × 42 × 0.4 mm double copper clad polyimide board (*2) Solder plated on pattern (*3) : Through holes Discontinued Product

µPC8102T CHARACTERISTICS (T A = +25 ˚C unless otherwise specified) – TEST CIRCUIT 1 – TA = +85˚C TA = –40˚C CIRCUIT CURRENT vs. SUPPLY VOLTAGE VCC - SUPPLY VOLTAGE - V ICC - CURCUIT CURRENT - mA TA = +25˚C – TEST CIRCUIT 2 (matched with 50 ΩΩΩΩΩ ) – CH1 S 22 1 U FS 1: 47.934 Ω 0.7613 Ω 826.93 pH 150.000 000 MHz CENTER 150.000 000 MHz SPAN 200.000 000 MHz CENTER 150.000 000 MHz SPAN 200.000 000 MHz CENTER 150.000 000 MHz SPAN 200.000 000 MHz CH1 O 21 log MAG 10 dB/ REF 0 dB 1: 20.543 dB CENTER 150.000 000 MHz SPAN 200.000 000 MHz CH1 S 12 log MAG 10 dB/ REF 0 dB 1: –41.406 dB CH1 S 11 1 U FS 1: 54.377 Ω –5.166 Ω 205.30 nH 150.000 000 MHz 150 MHz V CC = 1.0 V , ICC = 0.55 mA NF = 3.55 dB MARKER 1

150 MHz

150.000 000 MHz 150.000 000 MHz Discontinued Product

µPC8102T – TEST CIRCUIT 2 (matched to optimize NF) – CH1 S 22 1 U FS 1: 53.445 Ω – 1.0137Ω 1.0467 nF 150.000 000 MHz CENTER 150.000 000 MHz SPAN 200.000 000 MHz CENTER 150.000 000 MHz SPAN 200.000 000 MHz CENTER 150.000 000 MHz SPAN 200.000 000 MHz CH1 S21 log MAG 10 dB/ REF 0 dB 1: 19.418 dB CENTER 150.000 000 MHz SPAN 200.000 000 MHz CH1 S 12 log MAG 10 dB/ REF 0 dB 1: –43.251 dB CH1 S 11 1 U FS 1: 76.062 Ω 73.316 Ω 77.791 nH 150.000 000 MHz 150 MHz V CC = 1.0 V , ICC = 0.55 mA NF = 2.25 dB 150.000 000 MHz 150.000 000 MHz Discontinued Product

µPC8102T – TEST CIRCUIT 3 (matched with 50 ΩΩΩΩΩ ) – De1 CH1 S 22 1 U FS 1: 51.172 Ω 4.5469 Ω 2.5845 nH 280.000 000 MHz CENTER 280.000 000 MHz SPAN 200.000 000 MHz De1 CH1 S 11 1 U FS 1: 84.699 Ω –2.8789 Ω 197.44 pF 280.000 000 MHz CENTER 280.000 000 MHz SPAN 200.000 000 MHz CENTER 280.000 000 MHz SPAN 200.000 000 MHz De1 CH1 S 21 log MAG 10 dB/ REF 0 dB 1: 14.748 dB CENTER 260.000 000 MHz SPAN 200.000 000 MHz De1 CH1 S 12 log MAG 10 dB/ REF 0 dB 1: –32.145 dB 280 MHz V CC = 1.0 V , ICC = 0.55 mA NF = 4.0 dB 260.000 000 MHz 280.000 000 MHz Discontinued Product

µPC8102T – TEST CIRCUIT 4 (matched to optimize NF) – De1 CH1 S 22 1 U FS 1: 56.415 Ω –6.4043 Ω 67.633 pF 280.000 000 MHz CENTER 280.000 000 MHz SPAN 200.000 000 MHz De1 CH1 S 11 1 U FS 1: 81.02 Ω 75.09 Ω 42.682 nH 280.000 000 MHz CENTER 280.000 000 MHz SPAN 200.000 000 MHz CENTER 280.000 000 MHz SPAN 200.000 000 MHz De1 CH1 S 21 log MAG 10 dB/ REF 0 dB 1: 14.087 dB CENTER 280.000 000 MHz SPAN 200.000 000 MHz De1 CH1 S 12 log MAG 10 dB/ REF 0 dB 1: –33.561 dB 280 MHz VCC = 1.0 V , ICC = 0.55 mA NF = 2.93 dB 280.000 000 MHz TA = 25 ˚C 280.000 000 MHz Discontinued Product

µPC8102T – TEST CIRCUIT 5 (matched with 50 ΩΩΩΩΩ ) – De1 CH1 S 22 1 U FS 1: 60.922 Ω – 91.797Ω 5.2539 nF 330.000 000 MHz CENTER 330.000 000 MHz SPAN 200.000 000 MHz De1 CH1 S 11 1 U FS 1: 57.111 Ω 11.426 Ω 5.5105 nH 330.000 000 MHz CENTER 330.000 000 MHz SPAN 200.000 000 MHz CENTER 330.000 000 MHz SPAN 200.000 000 MHz De1 CH1 S 21 log MAG 10 dB/ REF 0 dB 1: 14.479 dB CENTER 330.000 000 MHz SPAN 200.000 000 MHz CH1 S 12 log MAG 10 dB/ REF 0 dB 1: –30.38 dB 330 MHz VCC = 1.0 V , ICC = 0.55 mA NF = 4.1 dB 330.000 000 MHz 330.000 000 MHz Discontinued Product

µPC8102T – TEST CIRCUIT 6 (matched to optimize NF) – De1 CH1 S 22 1 U FS 1: 47.793 Ω –6.7441 Ω 71.512 pF 330.000 000 MHz CENTER 330.000 000 MHz SPAN 200.000 000 MHz De1 CH1 S 11 1 U FS 1: 157.77 Ω –17.273 Ω 27.921 pF 330.000 000 MHz CENTER 330.000 000 MHz SPAN 200.000 000 MHz CENTER 330.000 000 MHz SPAN 200.000 000 MHz De1 CH1 S 21 log MAG 10 dB/ REF 0 dB 1: 11.58 dB CENTER 330.000 000 MHz SPAN 200.000 000 MHz De1 CH1 S 12 log MAG 10 dB/ REF 0 dB 1: –30.649 dB 330 MHz V CC = 1.00 V , ICC = 0.55 mA NF = 3.14 dB 330.000 000 MHz 330.000 000 MHz Discontinued Product

µPC8102T – TEST CIRCUIT 2 – IM3 –10 +10 –80 –70 –60 –50 –40 –30 –20 IM 3 AND OUTPUT LEVEL vs. INPUT LEVEL (150 MHz) INPUT LEVEL Pin [dBm] Output level Pout [dBm] POUT 3rd order intermodulation distortion IM3 (dBm) Discontinued Product

µPC8102T

6 PIN MINI MOLD PACKAGE DIMENSIONS (Unit: mm)

0.95 0.95 1.9 2.9 ±0.2 1.5 –0.1 +0.2 2.8 –0.3 +0.2 0.3 –0.05 +0.1 1.1 –0.1 +0.2 0.8 0 to 0.1 0.13 ±0.1 123 654 Discontinued Product

µPC8102T NOTE ON CORRECT USE (1) Observe precautions for handling because of electro-static sensitive devices. (2) Form a ground pattern as wide as possible to minimize ground impedance (to prevent undesired oscillation). (3) Keep the track length of the ground pins as short as possible. (4) The bypass capacitor (eg 1 000 pF) should be attached to the V CC pin. (5) The matching circuit must be each attached to input and output pins. RECOMMENDED SOLDERING CONDITIONS This product should be soldered in the following recommended conditions. Other soldering methods and conditions than the recommended conditions are to be consulted with our sales representatives. µPC8102T Soldering process Soldering conditions Recommended condition symbol Infrared ray reflow Package peak temperature: 235 ˚C, IR35-00-3 Hour: within 30 s. (more than 210 ˚C), Time: 3 time, Limited days: no.* Hour: within 40 s. (more than 200 ˚C), Time: 3 time, Limited days: no.* Wave Soldering Soldering tub temperature: less than 260 ˚C, Hour: within 10 s. WS60-00-1 Time: 1 time, Limited days: no.* Pin part heating Pin area temperature: less than 300 ˚C, Hour: within 3 s/pin. Limited days: no.* * It is the storage days after opening a dry pack, the storage conditions are 25 ˚C, less than 65 % RH. Note The combined use of soldering method is to be avoided (However, except the pin area heating method). For details of recommended soldering conditions for surface mounting, refer to information document SEMICON- DUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535EJ7V0IF00) . Discontinued Product

µPC8102T No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: “Standard“, “Special“, and “Specific“. The Specific quality grade applies only to devices developed based on a customer designated “quality assurance program“ for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices in “Standard“ unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact NEC Sales Representative in advance. Anti-radioactive design is not implemented in this product. M4 94.11 Discontinued Product