UPC78N08H

UPC78N00 NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

CS —————eSSSSSSSSSsSSSSSSSSSSSSSSSSSSsSSSsssMsese THREE TERMINAL POSITIVE VOLTAGE REGULATOR Se

DESCRIPTION

HPC78N00 series are monolithic three terminal positive regulators which employ internally current limiting, thermal shut down, output transistor safe operating area protection make them essentially indestructible. They are intended as fixed voltage regulators in a wide range of application including local on card regulation for elimination of distribution problems associated wide single point regulation.

FEATURES

© Output current in excess of 300 mA. © Built-in some protection circuits. {over current protection, SOA protection and thermal shut down) © Small package, TO-126 ORDER INFORMATION JPCTENTOH Please refer to “Quality grade on NEC Semiconductor Devices” (Document number IEI-1209) published by NEC Corporation to know the specification of quality grade on the devices and its recommended applications. EQUIVALENT CIRCUIT CONNECTION DIAGRAM © Vin Ree Rao QO Ris Os pel at i wm Ri Qs) © Vow ZR. Qie | D me (oP) neu? cto Sarpur Ce Ris Qs oyl 4h Rs — — - -— o GND Ss SSS Document No. IC-3267 (0.0. No. IC-6836) Date Published August 1993 M i Printed in Japan © NEC Corporation 1993

ABSOLUTE MAXIMUM RATINGS (Ta = 25 °C) CHARACTERISTIC. SYMBOL RATING UNIT Input Volga asr40 Operating Ambient Temperature Range -20 to +85 Operating Junction Temperature Range =20 to +150 Storage Temperature Range -55 to +150 Thermal Resistance unaion to ease) [Anca |_| -ow | Thermal Resistance (netion to ambient) | mew [110 | cow | (Note 1) /PC78NO5, 08, 10, 12, 15, 18 : 35 V, uPC78N24 : 40 V (Note 2) Internally limited TYPICAL CONNECTION Di INPUT OUTPUT ° | ° Ci: Required if regulator is located an appreciable distance from power supply filter C2: More than 0.1 pF Di: Needed for Vin < Vo Dz: Needed for Vo < GND RECOMMENDED OPERATING CONDITIONS Input Voltage Vin MPC78N12H | 15 | 1 | 30 | v | Oupurcurent fe | a0 |

ELECTRICAL CHARACTERISTICS pPC78N05 (Vin = 10 V, lo = 200 mA, 0 °C $ T) $ + 125 °C, Cin = 0.33 uF, Cour = 0.1 LF) CHARACTERISTIC SYMBOL TEST CONDITIONS [ min. | Tye. | MAX. UNIT T= 25°C Output Voltage Vo ! | 48 | 50 | 52 | v TVSVnS20V,5mASlo5200mA | 475| ~ | 6.25 | Ti = 25°C, 7VE Vw $ 25V | [15 [ 50 | Line Regulation REGww mV Ti = 25°C, 1 mA Slo $300 mA Load Regulation ae ei | [os [ml Ti = 25°C, 5 MAS lo $ 200 mA | [4 | 60 | Quiescent Current Change mA Output Noise Voltage Ti = 25°C, 10 Hz $f $ 100 kHz [| 50 | 120 |pvema| Ripple Rejection [R-R | 1)=25°C,f=120Hz, 8VE VWs 18V | 62 | 7 | | as | Short Circuit Current [ tomo | Ti=25°C, Vn =25V | [70 | | mal ELECTRICAL CHARACTERISTICS uPC78N08 (Vin = 14 V, lo = 200 mA, 0 °C $ T) $+ 125 °C, Cin = 0.33 uF, Cour = 0.1 LF) CHARACTERISTIC SYMBOL TEST CONDITIONS [ Min. | TP. | MAX. UNIT Output Voltage Vo Vv OS VEVWEBV,5mASIoS200mal 7.6 | | 84 | Ti = 25°C, 105 V $V $ 25 V Line Regulation , * | |e [0 | mv Ti = 25°C, 12V Vin $23 V | | 13 [ «0 | Ti = 25°C, 1 mA £ lo $ 300 mA | [2 | 160 | Load Regulation mv Ti = 25°C, 5 mA Slo § 200 mA [| 6 | 20 | Quiescent Current Change mA Output Noise Voltage Ti = 26°C, 10 Hz $f S 100 kHz [| 65 | 190 |pveme| Ripple Rejection [RR | T=25°C,f=120H2, 11VSvms2iv| 56 | 68 | | ae | Short Circuit Current [ tomon | i= 25°C, Vw=25V [ [170 | | ma]

ELECTRICAL CHARACTERISTICS uPC78N10 (Vin = 17 V, lo = 200 mA, 0 °C $ TiS + 125 °C, Cin = 0.33 uF, Cour = 0.1 uF) CHARACTERISTIC SYMBOL TEST CONDITIONS [ min. | Tye. | MAX.] UNIT T= 25°C Output Voltage Vo [26 | 10 | ro4] | 12.5VE Vin 25V,5mASl0<200mA| 95 |__| 105 | T= 25°C, 125V SVS 30V Line Regulation , ~ [| 2s {100 | mV T= 25°C, 18 VS VS 25V [ | ws] j Ti = 25°C, 1 MAS lo $ 300 mA |_| 12 | 200] Load Regulation REG. mV Ti = 25°C, 5 MA Slo $ 200 mA | | 8 | 100 | Quiescent Current Change Output Noise Voltage Ti = 25 °C, 10 Hz $f § 100 kHz [| a0 | 230 |uvems| Ripple Rejection [R-R | T=25°C,f=120Hz, 13VEVms23v| 56 | 66 | | B | Short Circuit Current [ tomer | Ti= 25°C, Vw = 30V || roof | mal ELECTRICAL CHARACTERISTICS uPC78N12 (Vin = 19 V, lo = 200 mA, 0 °C $ TiS + 125 °C, Cin = 0.33 UF, Cour = 0.1 uF) CHARACTERISTIC SYMBOL TEST CONDITIONS [ min. | Typ. | MAX.] UNIT Output Voltage Vo Vv 145 VEVmS27V,5mAZ10¢200mAl 11.4| | 12.6 | 7 ; Ti = 25°C, 145 VS Vin $30 V [ [20 [100 | Line Regulation mv Ti = 25°C, 16 VS Vin $ 27V || 20 | 50 | Ti = 25°C, 1 mA Slo $ 300 mA | | 18 | 240 | Load Regulation REG. mV Ti = 25°C, 5 mA Slo $ 200 mA | [ 22 | 120 | [eicconen ene Tae [oe [aa i 14.5 VS Vin £30 V [ [ [08 | Quiescent Current Change mA Output Noise Voltage Ti = 28°C, 10 Hz $f S 100 kHz [| 90 | 280 | pVems| Ripple Rejection [RoR | T=25°C,f=120Hz SVEvmsz5v| 55 | 64 | | ap | Short Circuit Current [ tomer | Ti= 25°C, Vw=30V [| too | | ma]

ELECTRICAL CHARACTERISTICS uPC78N15 (Vin = 23 V, lo = 200 mA, 0 °C $ Ti $ + 125 °C, Cin = 0.33 iF, Cour = 0.1 UF) CHARACTERISTIC ‘SYMBOL TEST CONDITIONS [ min. | Typ. | MAX.] UNIT Output Voltage Vo v 17.5V SVw$30V,5 MAS lo 200 mal 14.25] | 15.75 i Ti = 25°C, 17.5 V € Vw £30 V [| a2 [ 100 | Line Regulation REGww mv Ty = 25°C, 20 VE Vm € 30V | | 2 | 50 | Ti = 25°C, 1 mA Slo $ 300 mA Load Regulation : || 25 | 200 | mV Ti = 25 °C, 5 MA $ lo ¥ 200 mA [ | 16 | 150 |

17.5 V Vin $30 V [| [98 |

Output Noise Voltage Ti = 25°C, 10 Hz $f $ 100 kHz |_| 100 | 360 [pvema| Ripple Rejection [R-R | Ti=25°C,f=120Hz, 185VEVms285V] 64 | 62 | | aB | Short Circuit Current [ tome | Ti= 25°C, Vw = 30V |_| 100] | mal ELECTRICAL CHARACTERISTICS pPC78N18 (Vin = 27 V, lo = 200 mA, 0 °C £ T; $+ 125 °C, Cin = 0.33 LF, Cour = 0.1 LF) CHARACTERISTIC SYMBOL TEST CONDITIONS [ min. | Typ. | MAX. UNIT Output Vor \\ T=25°C [173] 12 | 187] utput Voltage fo v 21V Vn $33V,5mASIo$200mA | 17.1] ‘| 18.9 | Ti = 25°C, 21V 5 Vw S33 V |_| 2 | 100 | Line Regulation REG mv Ti = 25°C, 22 VE Vw € 33V |_| 25 | 50 | Load Regulation mv T= 25°C, 5 MA Slo $ 200 mA |_| _20 | 180 | [asscnccoron fee fee a fs | Quiescent Current Change Output Noise Voltage Ti = 25°C, 10 Hz $f $ 100 kHz |_| 118 | 420 [uvema| Ripple Rejection [R-R | T)=25°C, f= 120 Hz, 22VEVmE32V [ 53 | 6 | | as | Short Circuit Current | tomer | Ti= 25°C, Vw=33V [| [6 | | mal

ELECTRICAL CHARACTERISTICS yp PC78N24 (Vin = 33 V, lo = 200 mA, 0°C ST) $ + 125 °C, CIN = 0.33 iF, Cour = 0.1 LF) CHARACTERISTIC SYMBOL TEST CONDITIONS [ min. | Tye. | MAX.] UNIT Output Voltage Vo v 27V $V $ 38V,5mAS lo 200mA | 228] | 25.2 | T= 25 °C, 27 VS Vin $ 38V Line Regulation , * [| ao | 100 | mv Ti = 25 °C, 28 VS Vin € 38 V [| 30 [ 50 | Ti = 25 °C, 1 mA $ lo $ 300 mA [ | 35 [ 480 | Load Regulation mv Ti = 25 °C, 5 mA $ lo S 200 mA |_| 23 | 240 | Quiescent Current Change mA Output Noise Voltage Ti = 25°C, 10 Hz $f $ 100 kHz |_| 135 | 560 [1Vema| Ripple Rejection [R-R | T=25°C,F=120Hz,28VEVme38V| 50 | 57 | | aB | Short Circuit Current [ tome | Th= 25°C, Vw = 38V | [5] [ma]

TYPICAL CHARACTERISTICS (T; = 25 °C) Pr-Te 4Vo0-Ti 16 100 PT TTT) «(0 ee LOST ce ; g CONT | eee | ad pel TTT

2 Lt TS | $00

eal} ECC 0 8075 100128 180 -25 0 25 50 75 100 125 150 | Ta~ Ambient Temperature - °C Tj Junction Temperature - °C

5 Vo - Vin (uPC78NO5) 0 Vo ~ Vin __ |

ee BaRvG. > sli tt tt tf 20 screns | 1 6 > Z| uPC7BNi8 | | est titty Bis Z| | wectanns| | sft) AT g Ef | Af fice] ei), /) | | Dye | 5 0 Acro] A é |_| ae 82 j Fg LZ TT Taecrenos | LTT Wit yy ( o-1 2 3 4 56 6 7 B oS 10 15 20 2 30 35 | Vin - Input Voltage - V Vw - Input Voltage ~ V | leas ~ Vai (4PC78NO5) Topeak — (Vin-Vo) 7 700 CTL =n) g MD aoe tS bt oN PCEEEEEE) toes Py Tt yt f o[ | | “RR INN 0 5 10 15 20 25 30 35 ° 5 10 #15 20 25 30 Vin = Input Voltage - V (Vn - Vo}-Input to Output Voltage Differential - V i

RR oo TIT] = | . “Se 8 UMA Tl

5 PSS Resiaal | BIN AN Il

5 we < YALA NN PS: KT 8 CUCU & => EF peti / Mm NIN SS |_| e DAI ATI FIN $10 wares zal ae i rift] | Ca Te Trill TIN -25 0 25 50 75 100 125 150 10 100 1k 10k 100k T\\- Junction Temperature - °C f - Frequency - Hz R-R - lo (uPC78N05) > LINE TRANSIENT RESPONSE CTL] pee = eTTPrttt eat 7 eC oS oe lee | = 60 so 11 1 IY tl () 100 200 300 Es i 20 40 60 80 lo - Output Current - mA t-Time-Hs < LOAD TRANSIENT RESPONSE ; oT ame 5 04 —— PC78NOS: § | oe 2 oY i tt VL SELLE LLL 8. 02 soLi tT TT TAL Pn tee | S Le) 20 40 60 80 t-Time - ps

PACKAGE DIMENSIONS (Unit: mm) MPC78NOOH Series \\—_3PIN PLASTIC SIP (TO-126) A N E | Ad LP o a WUE] | J v I u I c F _ PaHP.2308 NOTE MILLIMETERS: INCHES | Each lead centerline is located within 0.23 mm —— mum material condition 1.1 MIN, 0.043 MIN. [ s | 0.23 0.009 ee [| 2.7802 0.106288 [| 14.5 MAX. 0.571 MAX.

NEC “UPC78NO0 Series Se RECOMMENDED SOLDERING CONDITIONS The following conditions (see table below) must be met when soldering this product. Please consult with our sales offices in case other soldering process is used, or in case soldering is done under different conditions. <TYPES OF THROUGH HOLE MOUNT DEVICE> [uPC78NOOH Series] Wave soldering Solder temperature: 260 °C or below, Flow time: 10 seconds or below

Application note name [no | Quality control of NEC semiconductor devices TEI-1202 Quality control guide of semiconductors devices MEI-1202 ‘Assembly manual of semiconductors devices 11-1207 NEC semiconductor device reliability/quality control system | 161-1212 | 11 :

NEC UPC78NO00 Series | eS —— [MEMO] No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation.NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising i from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. The devices listed in this document are not suitable for use in aerospace equipment, submarine cables, nuclear reactor control systems and life support systems. If customers intend to use NEC devices for above applications or they intend to use "Standard" quality grade NEC devices for applications not intended by NEC, please contact : our sales people in advance. Application examples recommended by NEC Corporation. Standard: Computer, Office equipment, Communication equipment, Test and Measurement equipment, Machine tools, Industrial robots, Audio and Visual equipment, Other consumer products, etc. Special: Automotive and Transportation equipment, Traffic control systems, Antidisaster systems, Anticrime . systems, etc. M4 92.6