UPC458G2-AP

UPC458 RENESAS | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 9

Technical content

R03DS0126EJ0100 Rev.1.00 Page 1 of 8 Feb.27.25 Datasheet UPC458, UPC4741 Low Noise Quad Operational Amplifiers

DESCRIPTION

UPC458 and UPC4741 consist of four independent frequency compensated operational amplifiers featuring higher speed, broader band than general purpose type as 741. UPC458 and UPC4741 are most appropriate for AC signal amplifier applications such as active filters or pulse amplifiers. Depending on the operating ambient temperature, UPC458 is suitable for communication application while UPC4741 is suitable for general-purpose usage. In addition, special arrangement products with sorted DC items are available. Along with this series of lineup, the dual type op-amp UPC258 and UPC4558 with the same circuit configuration are also available.

FEATURES

• Slew Rate 1.6 V/µs (TYP.)
• Zero-cross frequency 3.5 MHz (TYP.)
• Input Equivalent Noise Voltage Density 9 nV/ Hz ( TYP.)
• Input Offset Voltage ±1 mV (TYP.)
• Input Offset Current ±30 nA (TYP.)
• Low noise
• Built-In Phase Compensation Circuit
• Built-In Output Short Circuit Protection
• Standard Quad Op-Amp terminal connection (pin compatible)

ORDERING INFORMATION

Order Name (1) Selected Grade Package UPC458G2-AP Standard 14-pin plastic SOP ( 5.72 mm ( 225 )) UPC458G2(5)-AP DC item sorted product 14-pin plastic SOP ( 5.72 mm ( 225 )) UPC4741G2-AP Standard 14-pin plastic SOP ( 5.72 mm ( 225 )) UPC4741G2(5)-AP DC item sorted product 14-pin plastic SOP ( 5.72 mm ( 225 )) (1) Order names containing E1 or E2 indicate that the packaging format is embossed taping. Pin 1 of E1 is on draw-out side, and pin 1 of E2 is at take-up side.

UPC458, UPC4741 R03DS0126EJ0100 Rev.1.00 Page 2 of 8 Feb.27.25 EQUIVALENT CIRCUIT (1/4 Circuit) PIN CONFIGURATION (Top View) ABSOLUTE MAXIMUM RATINGS (TA = 25 °C) Parameter Symbol UPC458G2 UPC458G2(5) UPC4741G2 UPC4741G2(5) Unit Voltage between V ＋ and V － Note 1 V + - V - -0.3 ~ +40 V Differential Input Voltage VID ±30 V Input Voltage Note 2 VI V - -0.3 ~ V + +0.3 V Output Applied Voltage Note 3 VO V - -0.3 ~ V + +0.3 V Power Dissipation Note 4 PT 550 mW Output Short Circuit Duration Note 5 Indefinite s Operating Ambient Temperature TA -40 ~ +85 -20 ~ +80 °C Storage Temperature Tstg -55 ~ +125 °C 【Note】1. Reverse connection of supply voltage can cause destruction. 2. The input voltage should be allowed to input without damage or destruction. Even during the transition period of supply voltage, power on/off etc., this specification should be kept. The normal operation will establish when the both inputs are within the Common Mode Input Voltage Range of electrical characteristics. 3. This specification is the voltage which should be allowed to supply to the output terminal from external without damage or destructive. Even during the transition period of supply voltage, power on/off etc., this specification should be kept. The output voltage of normal operation will be the Output Voltage Swing of electrical characteristics. 4. Thermal derating factor is -5.5 mW/°C when operating ambient temperature is higher than 25 °C. 5. Pay careful attention to the total power dissipation not to exceed the absolute maximum ratings and Note 4. RECOMMENDED OPERATING CONDITIONS Parameter Symbol MIN. TYP. MAX. Unit Supply Voltage V ± ±4 ±16 V IN Q1II Q11 Q10 Q12 Q13 Q15 Q14 OUT V - Q16 V + R7R6 µPC458G2, μPC4741G2 1OUT1

11 V -

14 OUT4

13 II4

12 IN4

8 OUT3

10 IN3

• + - + + - 9+ - UPC458G2, UPC4741G2

UPC458, UPC4741 R03DS0126EJ0100 Rev.1.00 Page 3 of 8 Feb.27.25

ELECTRICAL CHARACTERISTICS

UPC458G2, 4741G2 (TA = 25 °C, V ± = ±15 V) Parameter Symbol MIN. TYP. MAX. Unit Test Condition Input Offset Voltage VIO ±1.0 ±5.0 mV RS ≤ 100 Ω Input Offset Current IIO ±30 ±50 nA Input Bias Current Note 6 IB 70 300 nA Large Signal Voltage Gain AV 25000 50000 RL ≥ 2 kΩ, VO = ±10 V Power Consumption Pd 150 210 mW IO = 0 A Common Mode Rejection Ratio CMR 80 90 dB Supply Voltage Rejection Ratio SVR 50 100 μV/V Maximum Output Voltage Vom ±12 ±13.7 V RL ≥ 10 kΩ Maximum Output Voltage Vom ±10 ±12.5 V RL ≥ 2 kΩ Common Mode Input Voltage Range VICM ±12 ±14 V Slew Rate SR 1.6 V/μs AV = 1 Input Equivalent Noise Voltage Density en 9 nV/ Hz f = 1 kHz Channel Separation 108 dB f = 10 kHz Parameter Symbol MIN. TYP. MAX. Unit Test Condition Input Offset Voltage VIO ±1.0 ±2.0 mV RS ≤ 100 Ω Input Offset Current IIO ±30 ±50 nA Input Bias Current Note 6 IB 100 nA Large Signal Voltage Gain AV 28000 50000 RL ≥ 2 kΩ, VO = ±10 V Power Consumption Pd 150 210 mW IO = 0 A Common Mode Rejection Ratio CMR 85 90 dB Supply Voltage Rejection Ratio SVR 50 μV/V Output Voltage Swing Vom ±12.5 ±13.7 V RL ≥ 10 kΩ Output Voltage Swing Vom ±11 ±12.5 V RL ≥ 2 kΩ Common Mode Input Voltage Range VICM ±13 ±14 V Slew Rate SR 1.6 V/μs AV = 1 Input Equivalent Noise Voltage Density Vn 9 nV/ Hz f = 1 kHz Channel Separation 108 dB f = 10 kHz 【Note】6. Input bias currents flow out from IC. Because each currents are base current of PNP-transistor on input stage.

UPC458, UPC4741 R03DS0126EJ0100 Rev.1.00 Page 4 of 8 Feb.27.25 Note that the following when using this product. In low Input level circuits, relative interferences may sometimes occur due to the temperature gradient in the IC chip when the difference of power dissipation between channels is extremely large. CHANNEL SEPARATION MEASUREMENT CIRCUIT VO2 VO1 チャネル･セパレーション = 20 ･ log 1 1000 ･ VO2 VO1 50 kΩ 50 Ω + 10 kΩ 10 kΩ Channel Separation

UPC458, UPC4741 R03DS0126EJ0100 Rev.1.00 Page 5 of 8 Feb.27.25 ELECTRICAL CHARACTERISTICS CURVE (TA = 25 °C, TYP.) (REFERENCE VALUE) UPC458G2, UPC4741G2 182 °C/W 200 400 600 800 0 20 40 60 80 100 Total Power Dissipation, PT [mW] Operating Ambient Temperature, TA [°C] PT vs. TA (Absolute maximum rating) 100 120 1 10 100 1k 10k 100k 1M 10M Voltage Gain, AV [dB] Frequency, f [Hz] AV vs. f V ± = ±15 V RL = 2 kΩ -2.5 -1.5 -0.5 0.5 1.5 2.5 -20 0 20 40 60 80 Input Offset Voltage, VIO [mV] Operating Ambient Temperature, TA [°C] VIO vs. TA V ± = ±15 V Any sample data -20 0 20 40 60 80 Input Bias Current, IB [nA] Operating Ambient Temperature, TA [°C] IB vs. TA V ± = ±15 V 100 1k 10k 100k 1M Maximum Output Voltage, Vom [Vp-p] Frequency, f [Hz] Vom vs. f RL = 10 kΩ V ± = ±15 V V ± = ±10 V V ± = ±5 V 0 ±10 ±20 Common Mode Input Voltage Range, VICM [Vp-p] Power Supply Voltage, V ± [V] VICM vs. V ±

UPC458, UPC4741 R03DS0126EJ0100 Rev.1.00 Page 6 of 8 Feb.27.25 100 1K 10K Maximum Output Voltage, Vom [Vp-p] Load Resistance, RL [Ω] Vom vs. RL V ± = ±15 V 0 5 10 15 20 25 30 Input Voltage, VI [V] Output Voltage, VO [V] Time, t [μs] Pulse Response V ± = ±15 V RL = 2 kΩ CL = 50 pF5 0 ±5 ±10 ±15 ±20 Circuit Current, ICC [mA] Power Supply Voltage, V ± [V] ICC vs. V ± -20 0 20 40 60 80 Circuit Current, ICC [mA] Operating Ambient Temperature, TA [°C] ICC vs. TA V ± = ±15 V 100 150 10 100 1k 10k 100k Channel Separation [dB] Frequency, f [Hz] Channel Separation V ± = ±15 V 0 10 100 1k 10k 100k Frequency, f [Hz] en vs. f Input Equivalent Noise Density, en [nV/ Hz] V ± = ±15 V RS = 100 Ω

UPC458, UPC4741 R03DS0126EJ0100 Rev.1.00 Page 7 of 8 Feb.27.25 USE WITH PRECAUTIONS

• Managing unused circuits If there is an unused circuit, the following connection is recommended.
• Power Supply (Dual Power Supply / Single Power Supply) The op amp operates when a predetermine voltage is applied between V + - V - . Therefore, while it operates from a single power supply (V - = GND), it is not possible to operate the input and output near GND. So please be careful of the common-mode input voltage range and maximum output voltage.
• Ratings of input/output pin voltage When the voltage of input/output pin exceeds the absolute maximum rating, the parasitic diode within the IC may conduct, causing characteristics degradation or damage. In addition, if the input pin is lower than V −, or the output pin exceeds the power supply voltage, it is recommended to make a clamping circuit using a diode with low forward voltage (e.g.: Schottky diode) as protection.
• Range of common-mode input voltage When the supply voltage does not meet the condition of electrical characteristics, the range of common-mode input voltage is as follows. V ICM (TYP.): V − +1 ~ V + -1 [V] (TA = 25 °C). During designing, do include some margin by considering characteristics variation temperature characteristics etc.
• Maximum output voltage The TYP. value range of the maximum output voltage when the supply voltage does not meet the condition of electrical characteristics is as follows: Vom + (TYP.) : V + -1.3 [V] (TA = 25 °C), Vom - (TYP.) : V - +1.3 [V] (TA = 25 °C) During designing, do include some tolerance by considering characteristics variation, temperature characteristics and so on. In addition, also note that the output voltage range (V om+ − Vom−) will become narrow when the output current increases.
• Handling of ICs When stress is added to the ICs due to warpage or bending of a board, the characteristic may fluctuate due to piezoelectric (piezo) effect. Therefore, pay attention to warpage or bending of a board. V - V - V +V + R R 同相入力電圧範囲 (VICM) 内の電位へ Example of unused circuit process To potentials within the range of common-mode input voltage (VICM) Remark: In this example, an intermediate potential between V + and V - is applied.

UPC458, UPC4741 R03DS0126EJ0100 Rev.1.00 Page 8 of 8 Feb.27.25 PACKAGE DRAWINGS 14-PIN PLASTIC SOP P-LSOP14-4.4×10.2-1.27 PLSP0014DB-A 0.17[g]

© 2024 Renesas Electronics Corporation. All rights reserved. Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation or any other use of the circuits, software, and information in the design of your product or system. Renesas Electronics disclaims any and all liability for any losses and damages incurred by you or third parties arising from the use of these circuits, software, or information. 2. Renesas Electronics hereby expressly disclaims any warranties against and liability for infringement or any other claims involving patents, copyrights, or other intellectual property rights of third parties, by or arising from the use of Renesas Electronics products or technical information described in this document, including but not limited to, the product data, drawings, charts, programs, algorithms, and application examples. 3. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 4. You shall be responsible for determining what licenses are required from any third parties, and obtaining such licenses for the lawful import, export, manufacture, sales, utilization, distribution or other disposal of any products incorporating Renesas Electronics products, if required. 5. You shall not alter, modify, copy, or reverse engineer any Renesas Electronics product, whether in whole or in part. Renesas Electronics disclaims any and all liability for any losses or damages incurred by you or third parties arising from such alteration, modification, copying or reverse engineering. 6. Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”. The intended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; industrial robots; etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control (traffic lights); large-scale communication equipment; key financial terminal systems; safety control equipment; etc. Unless expressly designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas Electronics document, Renesas Electronics products are not intended or authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems; surgical implantations; etc.), or may cause serious property damage (space system; undersea repeaters; nuclear power control systems; aircraft control systems; key plant systems; military equipment; etc.). Renesas Electronics disclaims any and all liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product that is inconsistent with any Renesas Electronics data sheet, user’s manual or other Renesas Electronics document. 7. No semiconductor product is absolutely secure. Notwithstanding any security measures or features that may be implemented in Renesas Electronics hardware or software products, Renesas Electronics shall have absolutely no liability arising out of any vulnerability or security breach, including but not limited to any unauthorized access to or use of a Renesas Electronics product or a system that uses a Renesas Electronics product. RENESAS ELECTRONICS DOES NOT WARRANT OR GUARANTEE THAT RENESAS ELECTRONICS PRODUCTS, OR ANY SYSTEMS CREATED USING RENESAS ELECTRONICS PRODUCTS WILL BE INVULNERABLE OR FREE FROM CORRUPTION, ATTACK, VIRUSES, INTERFERENCE, HACKING, DATA LOSS OR THEFT, OR OTHER SECURITY INTRUSION (“Vulnerability Issues”). RENESAS ELECTRONICS DISCLAIMS ANY AND ALL RESPONSIBILITY OR LIABILITY ARISING FROM OR RELATED TO ANY VULNERABILITY ISSUES. FURTHERMORE, TO THE EXTENT PERMITTED BY APPLICABLE LAW, RENESAS ELECTRONICS DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THIS DOCUMENT AND ANY RELATED OR ACCOMPANYING SOFTWARE OR HARDWARE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. 8. When using Renesas Electronics products, refer to the latest product information (data sheets, user’s manuals, application notes, “General Notes for Handling and Using Semiconductor Devices” in the reliability handbook, etc.), and ensure that usage conditions are within the ranges specified by Renesas Electronics with respect to maximum ratings, operating power supply voltage range, heat dissipation characteristics, installation, etc. Renesas Electronics disclaims any and all liability for any malfunctions, failure or accident arising out of the use of Renesas Electronics products outside of such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of Renesas Electronics products, semiconductor products have specific characteristics, such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Unless designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas Electronics document, Renesas Electronics products are not subject to radiation resistance design. You are responsible for implementing safety measures to guard against the possibility of bodily injury, injury or damage caused by fire, and/or danger to the public in the event of a failure or malfunction of Renesas Electronics products, such as safety design for hardware and software, including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult and impractical, you are responsible for evaluating the safety of the final products or systems manufactured by you. 10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. You are responsible for carefully and sufficiently investigating applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive, and using Renesas Electronics products in compliance with all these applicable laws and regulations. Renesas Electronics disclaims any and all liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. Renesas Electronics products and technologies shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You shall comply with any applicable export control laws and regulations promulgated and administered by the governments of any countries asserting jurisdiction over the parties or transactions. 12. It is the responsibility of the buyer or distributor of Renesas Electronics products, or any other party who distributes, disposes of, or otherwise sells or transfers the product to a third party, to notify such third party in advance of the contents and conditions set forth in this document. 13. This document shall not be reprinted, reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. 14. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products. (Note1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its directly or indirectly controlled subsidiaries. (Note2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. (Rev.5.0-1 October 2020) Corporate Headquarters Contact information TOYOSU FORESIA, 3-2-24 Toyosu, Koto-ku, Tokyo 135-0061, Japan www.renesas.com For further information on a product, technology, the most up-to-date version of a document, or your nearest sales office, please visit: www.renesas.com/contact/. Trademarks Renesas and the Renesas logo are trademarks of Renesas Electronics Corporation. All trademarks and registered trademarks are the property of their respective owners.