UPC4572

UPC4572 NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

LOW SUPPLY VOLTAGE, ULTRA LOW-NOISE, HIGH SPEED, WIDE BAND, LOW Is DUAL OPERATIONAL AMPLIFIER DESCRIPTION FEATURES The uPC4572 is a dual wide band, ultra low noise © Ultra low noise : en = 4 nV/VHz operational amplifier designed for low supply voltage © Low input bias current : 100 nA operation of +4 V to +14 V single supply and +2 V © High slew rate : 6 V/us to +7 V split supplies. Using high hre PNP transistors @ Low supply voltage : +2 V to +7 V (Split) forthe input circuit, input bias current and input equiva- +4 V to +14 V (Single) lent noise are better than conventional wide band © Internal frequency compensation operational amplifier. The uPC4572 is an excellent choice for preamplifi- ers and active filters in audio, instrumentation, and communication circuit. CONNECTION DIAGRAM EQUIVALENT CIRCUIT (Top View) 1/2 CIRCUIT ov" © uPC4572C, 457262 m | oJ | 7 Qs ouT: Li} [s]v" ag Org In OUT: fay | es |e Al ho Qs Ino c | Ge ia Raz Pe: a 18} lz Qi | Qis az - oh | Os U oOUT va 15] In * fed | i * reason Vv o— A A | [47 15) Ts) 12] Te] To] SEPESRSES fo) fo)

ORDERING INFORMATION

PART NUMBER PACKAGE QUALITY GRADE uPC4S72C 8 PIN PLASTIC DIP (300 mil) HPC4572G2 8 PIN PLASTIC SOP (225 mil) uPC4572HA 9 PIN SLIM SIP Please refer to “Quality grade on NEC Semiconductor Devices” (Document number IEI-1209) published by NEC Corporation to know the specification of quality grade on the devices and its recommended applications. Document No. IC-1864B Date Published March 1993 M © NEC Corporation 1986 Printed in Japan

ABSOLUTE MAXIMUM RATINGS (Ta = 25 °C) re rr [oupurstoncreatouion weee[ [Swit Note 1. Reverse connection of supply voltage can cause destruction. Note 2. The input voltage should be allowed to input without damage or destruction. Even during the transition period of supply voltage, power on/off etc., this specification should be kept. The normal operation will establish when the both inputs are within the Common Mode Input Voltage Range of electrical characteristics. Note 3. This specification is the voltage which should be allowed to supply to the output terminal from external without damage or destructive. Even during the transition period of supply voltage, power on/off etc., this specification should be kept. The output voltage of normal operation will be the Output Voltage Swing of electrical characteristics. Note 4. Thermal derating factor is -5.0 mV / °C when ambient temperature is higher than 55 °C. Note 5. Thermal derating factor is -4.4 mV / °C when ambient temperature is higher than 25 °C. Note 6. Pay careful attention to the total power dissipation not to exceed the absolute maximum ratings, Note 4 and Note 5. RECOMMENDED OPERATING CONDITIONS a Fowucwen fe | te Te

ELECTRICAL CHARACTERISTICS (Ta = 25 °C, V* = +5 V) |___evaracrerisnc Javwaou] wan [ rvr. [ wax. [ unr | conomon | tow oreervoroge | we [| aos | ss | mv [msn | | toatonat cure Mote | tw [Tse [sto [a | tmouesine caren ore [wT too ooo Pome | t2rsesionatvorage Gain [ae | to | too || vn | nzainweszy | | semnivcurent fe Pas Tr [ma | een tot amine | | common Modensiesion rato [own [70 [oo | [a [ | sumo Votesensiesion aio | svn | 70 | es | [a fT | cutout vorageswing | vm | ssa | sar | |v [mewn | output vorase swing | vee | aso | ass | [iv [mean | common Modeinputvorage range | ver [| see | se | [ov [oo | cutout ston creuitcurent | wow | ars | azo | [ mm [nro [sews se Tas Pe PO wae Partner | | sin wand wat rowwer [caw | to [te || we [ee tooue | unity Guin Froaveney | tow PP || te opentcoe | a Oe | Feta varmonicpisonion | two [| eae [| [foe P| ae [resemmumneavane | |] Se tre ore] |_toureauivton noize corentDonsiy | ix | | om | [oan] eatwe es ee [ Average vo temperature ait aver] | a2 | [mre Note 7. Input bias currents flow out from IC. Because each currents are base current of PNP-transistor on input stage. ELECTRICAL CHARACTERISTICS (Ta = 25 °C, V* = 5 V, V- = GND) [eanmacrensne ower] owe [ ve [mo [own | conoren [rewoievowe | we |p | | fase [sconce |e | | se [aw fm | Lrewsesconn sour fe [Pw [we fm fd [toae sia vousecon | m [ [|| vm pare or Fconnenneseainmaw fom | = |= | pw | SY [stray vomperasaonnaw | om | @ | |p # [Sid [oun vere [va [a2 [as [|v [aHwmeaw [oma now ve | [1a [we |v pattomemyn ‘| [ssnnentoicrmvnoe mone [ve [we [pas [wf [seme te | |e fa [esneowonrane few | | [we | Si” Note 7. Input bias currents flow out from IC. Because each currents are base current of PNP-transistor on input stage.

a MEASUREMENT CIRCUIT Fig. 1 Total Harmonic Distortion Measurement Circuit Vo = 1 Veins. 2kQ Fig. 2 Noise Measurement Circuit (RIAA) 2400 pF 8 200 pF 47 pF 40 dB Amp. fazaatie |S Rot], SPF yy-—o Vo = 08.548 + 4048) x N Ve = =o 100 kQ ” 76.5 dB 56 kQ. Fig. 3 Flat Noise Measurement Circuit (FLAT + JIS A) 10 kQ. PS JIS A}-0 Vo = 40 dB x Vn 100.2 “Vpn NO Rs = 100Q on * 40 dB

TYPICAL PERFORMANCE CHARACTERISTICS (Ta = 25 °C, TYP.) POWER DISSIPATION OPEN LOOP FREQUENCY RESPONSE 600 120 cee ENC SS) a o eee CN B 300) 22H TT SAT TT S 60 RPE CEE a ee OS 3 9 . peEEEEEERE CNG eof tT Tr Tr tt ft © 2 ‘ EEG) © CCN LET rT Tt tt i) 0 0 20. «+40.~« +<60+~ «+80 + 100 710 100 1k 10k 100k 1M 10M Ts ~ Ambient Temperature ~ °C £~ Frequency - Hz LARGE SIGNAL FREQUENCY RESPONSE OUTPUT CURRENT LIMIT 15 5 , TT Fi = 10 kQ 7 > 4 | 8 2 s 4 | | I 8 *haaSe I TBS Sox 4 100 ik 10k 100k 1M 0M ° 70 20 30 40 Frequency - Hz lo - Output Current - mA SUPPLY CURRENT SUPPLY CURRENT 8 8 4 | | tl Fs —€ 6 — 6 1 i 5 5 = = a 2 & Ey - L ELE - PELLET 200 a a 0 25 =10 Te— Ambient Temperature - °C V*— Supply Voltage - V

COMMON MODE INPUT VOLTAGE RANGE VOLTAGE FOLLOWER PULSE RESPONSE 10 5 é = o Ro=2kQ e 5 Le .

2 TTT 7"

i <i : £ 8 Eo CI 8 0 : Pz 6 8 + [~~ -25 a 5 25 =10 ar) 2 4 6 8 V* ~ Supply Voltage - V Time - ps o INPUT EQUIVALENT NOISE VOLTAGE (FLAT + JIS A) INPUT EQUIVALENT NOISE VOLTAGE DENSITY 5 100 8 = LETT TTT TT [ves] Vees5V s LITT TTT : _

2 SE 6

s »f ETT Try PT rr es g “COCO fg - LETT Te 2° e Lat ie = LLL PerPrr yy 8 2 LS © osLT TEE TTT Tyre | 5 > 10 100 1k 10k 100 k 10 100 1k 10k 100k Rs — Source Resistance - Q f - Frequency — Hz TOTAL HARMONIC DISTORTION - is Yoav ee ee pe § oft TEP TTT ia =2ta

5 HA H-H

a {Tit Ti Ty | oof aa HH H+ IZ a oe A a a YO eer z Hey oool tT Tit Pty Try 7} 10 100 ik 10k 100k f— Frequency - Hz

8PIN PLASTIC DIP (300 mil) = 8 5 [ro 4) A K _ P o;x F il cB M O~15° D P@C-100-2008.¢ 1) Each lead centerline is located within 0.25 Item to center of leads when formec pf | tamin, | 9.085 mn. | 0.51 MIN. 0.020 MIN [1 | 4.31 MAX. 0.170 MAX. [iw [exe | ooo" e [comm | 9.035 mn. |

8 PIN PLASTIC SOP (225 mil)

Heese & Ll O O 1 4 A H oO ! J J | Gee) fo (ECE LY + ttt cot — 4 ee +t 3 L “ [c] ol] d [o[u @ S8GM-50-2258-2 NOTE ITEM| MILLIMETERS INCHES Each lead centerline is located within 0.12 ee bo [eat | oni 0.10.1 0.004+0.004 1.8 MAX, 0.071MAX. 1.49 0.059 [1 | 4.4 0.173 MM 0.043 0.15%339 0.00673. 835 M 0.12 0.005 N 0.15 0.006

9 PIN PLASTIC SLIM SIP

ee * ° ¥ lt [| > | z c v S (Hs U ~ Fle @) POHA-2548 Each lead centerline is located within 0.25 mm (0.01 inch) of its true position (T.P.) at maxi- Ce oe | ome ope | en Ce eee De | sma | ozrmax | i Pe

RECOMMENDED SOLDERING CONDITIONS The following conditions (see table below) must be met when soldering this product. Please consult with our sales offices in case other soldering process is used, or incase soldering is done under different conditions. TYPES OF SURFACE MOUNT DEVICE For more details, refer to our document “SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL” (IEI-1207). [uPC4572G2] Soldering . oe Recommended Soldering conditions condition symbol Infrared ray reflow Peak package’s surface temperature: 230 °C or below, Reflow time: 30 seconds or below (210 °C or higher), IR30-00-1 Number of reflow process: 1, Exposure limit*: None VPS Peak package's surface temperature: 215 °C or below, Reflow time: 40 seconds or below (200 °C or higher), VP15-00-1 Number of reflow process: 1, Exposure limit*: None Wave soldering Solder temperature: 260 °C or below, Flow time: 10 seconds or below, WS 15-00-1 Number of flow process: 1, Exposure limit*: None Partial heating method | Terminal temperature: 300 °C or below, Flow time: 10 seconds or below, Exposure limit*: None *: Exposure limit before soldering after dry-pack package is opened. Storage conditions: 25 °C and relative humidity at 65 % or less. Note: Do not apply more than a single process at once, except for “Partial heating method.” TYPES OF THROUGH HOLE DEVICE [uPC4572C, uPC4572HA] Soldering . wee Recommended Wave soldering Solder temperature: 260 °C or below, Flow time: 10 seconds or below

[MEMO]

[MEMO] No part of this document may be copied or reproduced in any from or by any means without the prior written consent of NEC Corporation.NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. The devices listed in this document are not suitable for use in aerospace equipment, submarine cables, nuclear reactor control systems and life support systems. If customers intend to use NEC devices for above applications or they intend to use "Standard" quality grade NEC devices for applications not intended by NEC, please contact our sales people in advance. Application examples recommended by NEC Corporation. Standard: Computer, Office equipment, Communication equipment, Test and Measurement equipment, Machine tools, Industrial robots, Audio and Visual equipment, Other consumer products, etc. Special: Automotive and Transportation equipment, Traffic control systems, Antidisaster systems, Anticrime systems, etc. Ma 92.6 sss