UPC4570HA

UPC4570 NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

DUAL ULTRA LOW-NOISE, WIDEBAND, OPERATIONAL AMPLIFIER EE DESCRIPTION FEATURES The uPC4570 is an ultra low-noise, wideband high © Ultra low noise : en = 4.5 nV/VHz slew-rate, dual operational amplifier. Input equivalent © High slew rate: 7 V/us noise is three times better than the conventional 4558 © High gain bandwidth product: type op-amps. The gain bandwidth products and GBW = 15 MHz at 100 kHz the slew-rate are seven times better than 4558. In @ Internal frequency compensation spite of fast AC performance, the uPC4570 is extremely stable under voltage-follower circuit conditi- ons. Supply current is also improved compared with conventional wideband op-amps. The PC4570 is an excellent choice for pre-amplifiers and active filters in audio, instrumentation, and communication circuits. CONNECTION DIAGRAM EQUIVALENT CIRCUIT (1/2 Circuit) (Top View) Vio uPC4570C, 4570G2 Ri a _ a _ _ ‘Or out: Gy [3] v" Qs Oy \\ 14 Our: ‘ ae. ac a A | 8 /r Iwo ae | Ce ™] Re Ia 16] te oa, . oh | Os r | |—oout Naa Ina D . Fad | HPCASTORA Vo DLA Al | LJ [6] 2] TeI [3] ppt ee zag

ORDERING INFORMATION

PART NUMBER PACKAGE QUALITY GRADE HPC4570C 8 PIN PLASTIC DIP (300 mil) uPC4570G2 8 PIN PLASTIC SOP (225 mil) HPC4S7OHA 9 PIN SLIM SIP Please refer to “Quality grade on NEC Semiconductor Devices” (Document number IEI-1209) published by NEC Corporation to know the specification of quality grade on the devices and its recommended applications. eee Document No. IC-19968 (0.D. No. IC-66528) Date Published March 1993 M © NEC Corporation 1987 Printed in Japan

ABSOLUTE MAXIMUM RATINGS (Ta = 25 °C) Foupa Sto Gest waion www [|S Note 1. Reverse connection of supply voltage can cause destruction. Note 2. The input voltage should be allowed to input without damage or destruction. Even during the transition period of supply voltage, power on/off etc., this specification should be kept. The normal operation will establish when the both inputs are within the Common Mode Input Voltage Range of électrical characteristics. Note 3. This specification is the voltage which should be allowed to supply to the output terminal from external without damage or destructive. Even during the transition period of supply voltage, power on/off etc., this specification should be kept. The output voltage of normal operation will be the Output Voltage Swing of electrical characteristics. Note 4. Thermal derating factor is -5.0 mV / °C when ambient temperature is higher than 55 °C. Note 5. Thermal derating factor is -4.4 mV / °C when ambient temperature is higher than 25 °C. Note 6. Pay careful attention to the total power dissipation not to exceed the absolute maximum ratings, Note 4 and Note 5. RECOMMENDED OPERATING CONDITIONS [———evaancrenene | svwwor [wwe [we [wae [ow] [Sieprvonse ie Pd Fowputcuree SSSS*dtS || Fe ee

ELECTRICAL CHARACTERISTICS (Ta = 25 °C, V* = +15 V) [aamncmnene avwwor| wm ne wwe [ owe conorone [rasommvonee tm |e | | ow fee “[rosormeconaneot fe | [aw fom fm | ‘[renouconnoan fs | fw fm fm) id [nsesinsvomsecan [mw |» | oe || vw | atamworey | a a [comensascnaoainnne em | [w | | @ fs Fowmvowsesvin ve [aw fame] |v ferme Fownvennesvng [v= | ve fens | |v [are [connor vatnorone | v= | ae foe | fv | SSS—~*d a | cinsonvionrene few | w | | [mm [awe | [cncaneenmr tm || || me Loom a de [comasaomen | | | [eee | | Note 7. Input bias currents flow out from IC. Because each currents are base current of PNP-transistor | on input stage. Note 8. For asterisk items, those spec was applied to the production lots mode after Jun. ‘87 by the effect of input PNP Tr’s hfe rise. Before spec is following. [cimcrensne [ona] am [ve [woe [ own [coon] Frromecnent |e [|e [aw fm fd Freraiecorn ee || we fo | me | Sd Fieanaennssevone | «| | | [wal aaren _+|

Fig. 1 Total Harmonic Distortion Measurement Circuit Vo = 3 Vims 2kQ Fig. 2 Noise Measurement Circuit (RIAA) 2.400 pF 8 200 pF 47 LF 40 dB Amp. + Oo = faprogye |S N bio=30 kbd Vo = (36.5 dB + 40 dB) x Va 100 kQ 76.5 dB | . | Fig. 3 Noise Measurement Circuit (FLAT + JIS A) , 10k PS © Vo = 40 dB xVn

1009 Vee ve |

Rs = 1002 “ne 40 dB ‘

TYPICAL PERFORMANCE CHARACTERISTICS (Ta = 25 °C, TYP.) POWER DISSIPATION OPEN LOOP FREQUENCY RESPONSE 600 120 = soot} i | ft | ty | % oof | N me CEA EEN So) a S 4 ed ee 2 NI B 9q9 | 48706. 4870018 [SAAT | S 60 CRRA CPN S ool | | |} ttt Sy Sy

2 EEE got EN

PERERA, cree Li TTT PTT ty | 6 0 20.40.6080 ~~ 100 +10 100 1k 10k 100k 1M 10M Ta - Ambient Temperature - °C f - Frequency — Hz LARGE SIGNAL FREQUENCY RESPONSE OUTPUT CURRENT LIMIT 30 415 Vie st5V ; > vis #15 Z 2 $ x10 _ ~~ 3 3 2 10 0 +5 2 * S$ 's IN N 9100 1k 10k 100k 1M 10M O 20 40 60 80 £~ Frequency ~ Hz lo = Output Current = mA SUPPLY CURRENT SUPPLY CURRENT 8 8 Vis #15V Es Be

2 OOeT TTT i PE

£ & 3 4 LPP es é 4 roe | z= = 3 3 Lo2 3 2 -0 0 2 40 60 80 0 =10 20 Ts ~ Ambient Temperature = °C V* ~ Supply Voltage -V

COMMON MODE INPUT VOLTAGE RANGE VOLTAGE FOLLOWER PULSE RESPONSE b 20 10 g i pea ; 3 a 3 an) 3 0 5-0 aS — o 5 ta oN - £ 0 =10 =20 0 2 4 6 8 V* ~ Supply Voltage - V Time ~ ps , INPUT EQUIVALENT NOISE VOLTAGE (FLAT + JISA) INPUT EQUIVALENT NOISE VOLTAGE DENSITY & 100 7 8

2 LL Ty TTT Tess Vis s15V

i Rs = 1009 a LUT TT UT By s »ot TP ry es WT | gs LET ty st | 8 7 $2 a - {| UT ty Ue ae 4 5 tree oT TT e LUT yf 2 2 Tabb bet tt ; | FS 10 700 Tk Ok 100k 10 700 Tk Ok 100k Rs - Source Resistance - Q f — Frequency - Hz | TOTAL HARMONIC DISTORTION [TT TT TTT fv =aisv

6 COUT |

§ 9, CUPP aka 5 fT Pty Tr ry a {fT iy Ty 5 fT [PT yy 0.01 i Heo A 4 2 [] (it itt [iy 3 —— a 8 on Se 4 OO 2 [Ty ttt tit 7 ooorLT TTT yy ttt 1} 10 700 Tk Tok 100k f Frequency - Hz

8PIN PLASTIC DIP (300 mil) = 8 5 1 4 A K p == > VOI / a | oF \\ \\ ~ FH mil cB M O~15° D Pac-100-2008.¢ NOTES MILLIMETERS. INCHES 7 1) Each lead centerline is located within 0.25 mm (0.01 inch) of its true position (T.P.) at 10.16 MAX maximum material condition. [8 | 1.27 MAX. Item “K” to center of leads when form 70.008 paral. | 2 | oot J 5.08 MAX. — | 0.200 MAX. [es [oe v v [of eon |

a

8 PIN PLASTIC SOP (225 mil)

Pi Fi) Cy Fy Ox eee Bs tL} DC} O 1 4 A H ° : J J | Ge fo | ote w B [aN] b [du @] S8GM-50-225B-2 NOTE ITEM| — MILLIMETERS INCHES Each lead centerline is located within 0.12 a a bo | eanits | ents E 0.10.1 0.040.004 F 1.8 MAX. 0.071MAX, 6.50.3 0.256#0.012 Co foee ere J A 0.043 M 0.12 0.005 N 0.15 0.006

a | | fe} E4 I} || > | Zz c Vv _ (Hy u F POHA.2548 Each lead centerline is located within 0.25 mm (0.01 inch) of its true position (T.P.) at maxi- [a | 22eemax | 09 max. | De [zee [ona | De | s7smx | oz? wax | 0.252882 0.01 28885

RECOMMENDED SOLDERING CONDITIONS The following conditions (see table below) must be met when soldering this product. Please consult with our sales offices in case other soldering process is used, or in case soldering is done under different conditions. TYPES OF SURFACE MOUNT DEVICE For more details, refer to our document “SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL” (IEI-1207). [uPC4570G2] Soldering Fi oe Recommended method Soldering conditions condition symbol Infrared ray reflow Peak package's surface temperature: 230 °C or below, Reflow time: 30 seconds or below (210 °C or higher), 1R30-00-1 Number of reflow process: 1, Exposure limit*: None VPS Peak package's surface temperature: 215 °C or below, Reflow time: 40 seconds or below (200 °C or higher), VP15-00-1 Number of reflow process: 1, Exposure limit*: None Wave soldering Solder temperature: 260 °C or below, Flow time: 10 seconds or below WS15-00-1 | Number of flow process: 1, Exposure limit*: None : Partial heating method | Terminal temperature: 300 °C or below, i Flow time: 10 seconds or below, Exposure limit*: None | *: Exposure limit before soldering after dry-pack package is opened. ; Storage conditions: 25 °C and relative humidity at 65 % or less. | Note: Do not apply more than a single process at once, except for “Partial heating method.” TYPES OF THROUGH HOLE DEVICE ! [uPC4570C, uPC4570HA] Soldering . oe Recommended Wave soldering Solder temperature: 260 °C or below, Flow time: 10 seconds or below

[MEMO]

[MEMO] No part of this document may be copied or reproduced in any from or by any means without the prior written consent of NEC Corporation.NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual Property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. The devices listed in this document are not suitable for use in aerospace equipment, submarine cables, nuclear reactor control systems and life support systems. If customers intend to use NEC devices for above applications or they intend to use "Standard" quality grade NEC devices for applications not intended by NEC, please contact our sales people in advance. Application examples recommended by NEC Corporation. Standard: Computer, Office equipment, Communication equipment, Test and Measurement equipment, Machine tools, Industrial robots, Audio and Visual equipment, Other consumer products, etc. Special: Automotive and Transportation equipment, Traffic control systems, Antidisaster systems, Anticrime systems, etc. Ma 92.6 ee