UPC4064C

UPC4064 NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

QUAD J-FET INPUT LOW-POWER OPERATIONAL AMPLIFIER DESCRIPTION FEATURES The 1PC4064 is a low power J-FET input quad © Low supply current: 800 yA (TYP.) operational amplifier that will operate at voltage © Very low input bias and offset currents less than 1 mA. With input bias and offset currents © Low supply voltage operation as low as a few pA, the wPC4064 is an excellent © Output short circuit protection choice for hand-held measurement equipment. @ Internal frequency compensation CONNECTION DIAGRAM EQUIVALENT CIRCUIT (1/4 Circuit) (Top View) i TV yPCA064C, 406462 Ri ZRa = Re a Qo par - Qua OUT: {14} OUTa | | foe » GAA. a [GA Oy Int Iva Re "OF, Qe in in v Vv ino [5} In [on be | b= Ore he [5 oP Ina 2 iT h ) OUT? {8] OUTs Qis Rez Rs = Re ov

ORDERING INFORMATION

PART NUMBER PACKAGE QUALITY GRADE uPC4O64C 14 PIN PLASTIC DIP (300 mil) uPC4064G2 14 PIN PLASTIC SOP (225 mil) Please refer to “Quality grade on NEC Semiconductor Devices” (Document number IEI-1209) published by NEC Corporation to know the specification of quality grade on the devices and its recommended applications. eee Document No. IC-1988A {0.D. No. IC-6679A) Date Published March 1993 M © NEC Corporation 1987 Printed in Japan

ABSOLUTE MAXIMUM RATINGS (Ta = 25 °C) PARAMETER SYMBOL HPC4061 UNIT Input Votage rr) 08 wo V-008 Output Voltage rc) vse v0 Power Dissipation Pr Operating Temperature Range -20 to + 80 Note 1, Reverse connection of supply voltage can cause destruction. Note 2. The input voltage should be allowed to input without damage or destruction. Even during the transition period of supply voltage, power on/off etc., this specification should be kept. The normal operation will establish when the both inputs are within the Common Mode Input Voltage Range of electrical characteristics. Note 3. This specification is the voltage which should be allowed to supply to the output terminal from external without damage or destructive. Even during the transition period of supply voltage, power on/off etc., this specification should be kept. The output voltage of normal operation will be the Output Voltage Swing of electrical characteristics. Note 4. Thermal derating factor is -7.6 mV/°C when ambient temperature is higher than 50 °C. Note 5. Thermal derating factor is -5.5 mV/°C when ambient temperature is higher than 25 °C. Note 6. Pay careful attention to the total power dissipation not to exceed the absolute maximum ratings, Note 4 and Note 5. RECOMMENDED OPERATING CONDITIONS

ELECTRICAL CHARACTERISTICS (Ta = 25 °C, V* = +15 V) [___ewwacrnsne [avon] ww [re [wae [ow | coromen —_‘] [ioowormevanee | we | [= [se fw [eswe [now oa coven |e | = [wef | Cd [tse Sonivenecrin [mw [2 |e | [vm [Armano | [sien cure | = || ow | To | va [eno com amnion | [conminnsaefaksionnaie [eum | we | © [| fe | id FSi Vag asion aio | svn | vo | | | wf jowavnmsen [ve foe | | [om Ere [seme em Pe Pony conFwaseey [te || [retEadainine ave] «|| @ | [wnt] aswariee | Pinowotsevenee | we ||| te | wy | wat namo | [anes oTenperarann favs] | | [wre | ee-moweme | [now ona curentenn [ie [|| @ | | hemowae [inna scien » | | | a8 | [en a0 arore | Note 7. Input bias currents flow into IC. Because each currents are gate leak current of channel J-FET on input stage. And that are temperature sensitive. Short time measuring method is recommendable to maintain the junction temperature close to the ambient temperature.

TYPICAL PERFORMANCE CHARACTERISTICS (Ta = 25 °C, TYP.) POWER DISSIPATION OPEN LOOP FREQUENCY RESPONSE 1000 120 v qev od ODT TT Ese € 1 100 7 800 ¢ § & joes — PLN EE e § 10 NM Po tL IN | E 7m an 200 9° 20 : aL NC 0 20 40 60 80 100 o 10 100 1k 10k 100k 1M 10M Ts- Ambient Temperature - °C f - Frequency - Hz LARGE SIGNAL FREQUENCY RESPONSE OUTPUT VOLTAGE SWING 30 40 = Vis 215V ts Ru = 10 kQ| = R= 10k > . 2 ad WW 3 3 2 7 s s 5 5 1 — g oP N g ° Vis 25V o 10 > > 9100 1k 10k 100 k 1M 10M 0 +10 +20 # Frequency ~ Hz V*— Supply Voltage - V OUTPUT SOURCE CURRENT LIMIT OUTPUT SINK CURRENT LIMIT. +15 15 — a

4 SS Vi = #15V 3 Vt = £15V

2 \\ FE] 3 : TD S +10 S = -10 — S 3 8 \\ =20°C & 25°C 8 $ | +5 & -5 S 3 & 2 ‘ 1 a : LY) 5 10 15 0 5 10 15 lo source — Source Current - mA lo sexx — Sink Current - mA

VOLTAGE FOLLOWER PULSE RESPONSE INPUT EQUIVALENT NOISE VOLTAGE DENSITY > sf] oT Ties, |_| vi=sisy fl = Cx = 100 pF 2

2 Viest5V se 40 ~]

s =>

3 St x [———~

§ 0 — £8 8 l= pot | | | ft} ee a a || 0 5 i015 ~~20 %9 700 Tk Ok 100k Time - ps f Frequency - Hz INPUT BIAS CURRENT SUPPLY CURRENT 100 1000 Ts PT 4 ——T = 40 <q 800 —= 5 600 3 5 os z | kd =

2 L EB 400

001 het | || 20.0 20. +40 60 80 0 35 =10 218 =20 Te— Ambient Temperature ~ °C V* - Supply Voltage - V

14PIN PLASTIC DIP (300 mil) 14 8 — 1 7 A K 5 (a a YOO OOOO i HL D c 8 M Om15 P14¢-100-30081 1) Each lead centerline is located within 0.25 tem “K” to center of leads when formec Jono 72008 parallel. | © | osor | 0.020788 | Ce) esta | omomn | sate [oro c L foes eae [085 [oor w [om [000 |

14 PIN PLASTIC SOP (225 mil)

rl ry ri rl ry | rh oo On, a) Cy Cy Cy J CJ J he PHAeaRBHABEH Pi CI CI Cc CI CI CI a) ioe) | . : | SE H © \\ 5 uw | DT Le MeL w (¢] [a[_n | 8 NOTE ITEM] MILLIMETERS INCHES Each lead centerline is located within, 0.12 maximum material condition B 1.42 MAX. 0.056 MAX. 1.8 MAX 0.071MAX. G 1.49 0.059 H 6.540.3 0.256#0.012 ee J Ww 0.043 K 0.151832 0.00673 393 L 0.6+0.2 0.02473 808 M 0.12 0.005

RECOMMENDED SOLDERING CONDITIONS The following conditions (see table below) must be met when soldering this product. Please consult with our sales offices in case other soldering process is used, or in case soldering is done under different conditions. TYPES OF SURFACE MOUNT DEVICE For more details, refer to our document “SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL” (IEI-1207). [ uPC4064G2 } Soldering : ge Recommended method Soldering conditions condition symbol Infrared ray reflow Peak package's surface temperature: 230 °C or below, Reflow time: 30 seconds or below (210 °C or higher), IR30-00-1 Number of reflow process: 1, Exposure limit*: None VPS Peak package's surface temperature: 215 °C or below, Reflow time: 40 seconds or below (200 °C or higher), VP15-00-1 Number of reflow process: 1, Exposure limit*: None | Wave soldering Solder temperature: 260 °C or below, | Flow time: 10 seconds or below | WS 15-00-1 Number of flow process: 1, Exposure limit*: None | Partial heating method | Terminal temperature: 300 °C or below, | Flow time: 10 seconds or below, Exposure limit*: None *: Exposure limit before soldering after dry-pack package is opened. Storage conditions: 25 °C and relative humidity at 65 % or less. Note: Do not apply more than a single process at once, except for “Partial heating method.” TYPES OF THROUGH HOLE DEVICE [uPC4064C] Soldering . ge Recommended Soldering conditions condition symbol Wave soldering Solder temperature: 260 °C or below, Flow time: 10 seconds or below

[MEMO]

I[MEMO] No part of this document may be copied or reproduced in any from or by any means without the prior written consent of NEC Corporation.NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. The devices listed in this document are not suitable for use in aerospace equipment, submarine cables, nuclear reactor control systems and life support systems. If customers intend to use NEC devices for above applications or they intend to use "Standard" quality grade NEC devices for applications not intended by NEC, please contact our sales people in advance, Application examples recommended by NEC Corporation. Standard: Computer, Office equipment, Communication equipment, Test and Measurement equipment, Machine tools, Industrial robots, Audio and Visual equipment, Other consumer products, etc. Special: Automotive and Transportation equipment, Traffic control systems, Antidisaster systems, Anticrime systems, etc. M4 926 a