UPC3239TB

UPC3239TB RENESAS | Alldatasheet

Document overview

• PDF pages: 21

Technical content

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.

1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipment; co mmunications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.

DESCRIPTION

The μPC3239TB is a silicon monolithic integrated circuit designed as IF amplifier for DBS LNB. This device exhibits low noise figure and high power gain characteristics. This IC is manufactured using our UHS0 (Ultra High Speed Process) bipolar process.

FEATURES

• Low current : ICC = 29.0 mA TYP.  Medium output power : P O (sat) = +12.5 dBm TYP. @ f = 1.0 GHz : P O (sat) = +10 dBm TYP. @ f = 2.2 GHz  High linearity : P O (1dB) = +10 dBm TYP. @ f = 1.0 GHz : P O (1dB) = +8 dBm TYP. @ f = 2.2 GHz  Power gain : G P = 25 dB TYP. @ f = 1.0 GHz : G P = 25.5 dB TYP. @ f = 2.2 GHz  Gain flatness : ΔGP = 1.0 dB TYP. @ f = 1.0 to 2.2 GHz  Noise Figure : NF = 4.0 dB TYP. @ f = 1.0 GHz : NF = 4.3 dB TYP. @ f = 2.2 GHz  Supply voltage : V CC = 3.0 to 3.6 V  Port impedance : input/output 50 Ω

APPLICATIONS

 IF amplifiers in DBS LNB, other L-band amplifiers, etc.

ORDERING INFORMATION

Part Number Order Number Package Marking Supplying Form μPC3239TB-E3 μPC3239TB-E3-A 6-pin super minimold (Pb-Free) C3V • Embossed tape 8 mm wide

• Pin 1, 2, 3 face the perforation side of the tape
• Qty 3 kpcs/reel Remark To order evaluation samples, please contact your nearby sales office Part number for sample order: μPC3239TB DATA SHEET Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. BIPOLAR ANALOG INTEGRATED CIRCUIT μPC3239TB

3.3 V, SILICON MMIC MEDIUM

Document No. PU10736EJ01V0DS (1st edition) Date Published October 2008 NS Printed in Japan

PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM Pin No. Pin Name

1 INPUT

2 GND

3 GND

4 OUTPUT

5 GND

(Top View) C3V (Bottom View) (Top View)

6 V CC

PRODUCT LINE-UP OF 3 V or 3.3 V-BIAS SILICON MMIC MEDIUM OUTPUT POWER AMPLIFIER (TA = +25°C, VCC = Vout = 3.0 V or 3.3 V, ZS = ZL = 50 Ω) Part No. V CC (V) ICC (mA) GP (dB) NF (dB) PO (1 dB) (dBm) PO (sat) (dBm) Package Marking μPC2762TB 3.0 26.5 13.0 (0.9 GHz) 15.5 (1.9 GHz) 6.5 (0.9 GHz) 7.0 (1.9 GHz) ＋8.0 (0.9 GHz) ＋7.0 (1.9 GHz) ＋9.0 (0.9 GHz) ＋8.5 (1.9 GHz) C1Z μPC2763TB 27.0 20.0 (0.9 GHz) 21.0 (1.9 GHz) 5.5 (0.9 GHz) 5.5 (1.9 GHz) ＋9.5 (0.9 GHz) ＋6.5 (1.9 GHz) ＋11.0 (0.9 GHz) ＋8.0 (1.9 GHz) 6-pin super minimold C2A μPC2771TB 36.0 21.0 (0.9 GHz) 21.0 (1.5 GHz) 6.0 (0.9 GHz) 6.0 (1.5 GHz) ＋11.5 (0.9 GHz) ＋9.5 (1.5 GHz) ＋12.5 (0.9 GHz) ＋11.0 (1.5 GHz) C2H μPC8181TB 23.0 19.0 (0.9 GHz) 21.0 (1.9 GHz) 22.0 (2.4 GHz) 4.5 (0.9 GHz) 4.5 (1.9 GHz) 4.5 (2.4 GHz) ＋8.0 (0.9 GHz) ＋7.0 (1.9 GHz) ＋7.0 (2.4 GHz) ＋9.5 (0.9 GHz) ＋9.0 (1.9 GHz) ＋9.0 (2.4 GHz) C3E μPC8182TB 30.0 21.5 (0.9 GHz) 20.5 (1.9 GHz) 20.5 (2.4 GHz) 4.5 (0.9 GHz) 4.5 (1.9 GHz) 5.0 (2.4 GHz) ＋9.5 (0.9 GHz) ＋9.0 (1.9 GHz) ＋8.0 (2.4 GHz) ＋11.0 (0.9 GHz) ＋10.5 (1.9 GHz) ＋10.0 (2.4 GHz) C3F μPC3239TB 3.3 29.0 25 (1.0 GHz) 25.5 (2.2 GHz) 4.0 (1.0 GHz) 4.3 (2.2 GHz) ＋10 (1.0 GHz) ＋8 (2.2 GHz) ＋12.5 (1.0 GHz) ＋10 (2.2 GHz) C3V Remark Typical performance. Please refer to ELECTRICAL CHARACTERISTICS in detail. Data Sheet PU10736EJ01V0DS 2 μPC3239TB

Parameter Symbol Conditions Ratings Unit Supply Voltage VCC T A = +25°C, pin 4 and 6 4.0 V Total Circuit Current ICC T A = +25°C, pin 4 and 6 55 mA Power Dissipation PD T A = +85°C Note 270 mW Operating Ambient Temperature T A −40 to +85 °C Storage Temperature Tstg −55 to +150 °C Input Power Pin T A = +25°C +10 dBm Note Mounted on double-sided copper-clad 50 × 50 × 1.6 mm epoxy glass PWB RECOMMENDED OPERATING RANGE Parameter Symbol Conditions MIN. TYP. MAX. Unit Supply Voltage VCC The same voltage should be applied to pin 4 and 6. 3.0 3.3 3.6 V Operating Ambient Temperature T A −40 +25 +85 °C Data Sheet PU10736EJ01V0DS 3 μPC3239TB

ELECTRICAL CHARACTERISTICS (T A = +25°C, V CC = Vout = 3.3 V, Z S = ZL = 50 Ω , unless otherwise specified) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit Circuit Current ICC No input signal 23 29.0 36.5 mA Power Gain 1 GP1 f = 0.25 GHz, P in = −30 dBm 21.5 24.5 27.5 dB Power Gain 2 GP2 f = 1.0 GHz, P in = −30 dBm 22 25 28 Power Gain 3 GP3 f = 1.8 GHz, P in = −30 dBm 22.5 25.5 28.5 Power Gain 4 GP4 f = 2.2 GHz, P in = −30 dBm 22.5 25.5 28.5 Saturated Output Power 1 PO (sat) 1 f = 1.0 GHz, P in = −5 dBm +10 +12.5 − dBm Saturated Output Power 2 PO (sat) 2 f = 2.2 GHz, P in = −10 dBm +7 +10 − Gain 1 dB Compression Output Power 1 PO (1 dB) 1 f = 1.0 GHz +7.5 +10 − dBm Gain 1 dB Compression Output Power 2 P O (1 dB) 2 f = 2.2 GHz +5 +8 − Noise Figure 1 NF1 f = 1.0 GHz − 4.0 4.8 dB Noise Figure 2 NF2 f = 2.2 GHz − 4.3 5.1 Isolation 1 ISL1 f = 1.0 GHz, P in = −30 dBm 28 35 − dB Isolation 2 ISL2 f = 2.2 GHz, P in = −30 dBm 28 35 − Input Return Loss 1 RLin1 f = 1.0 GHz, P in = −30 dBm 10 25 − dB Input Return Loss 2 RLin2 f = 2.2 GHz, P in = −30 dBm 10 15 − Output Return Loss 1 RLout1 f = 1.0 GHz, P in = −30 dBm 15 25 − dB Output Return Loss 2 RLout2 f = 2.2 GHz, P in = −30 dBm 15 25 − STANDARD CHARACTERISTICS FOR REFERENCE A = +25°C, VCC = Vout = 3.3 V, ZS = ZL = 50 Ω, unless otherwise specified) Parameter Symbol Test Conditions Reference Value Unit Power Gain 5 GP5 f = 2.6 GHz, P in = −30 dBm 24.5 dB Power Gain 6 GP6 f = 3.0 GHz, P in = −30 dBm 22.5 Gain Flatness ΔGP f = 1.0 to 2.2 GHz, P in = −30 dBm 1.0 dB K factor 1 K1 f = 1.0 GHz, P in = −30 dBm 1.6 − K factor 2 K2 f = 2.2 GHz, P in = −30 dBm 1.5 − Output 3rd Order Intercept Point 1 OIP 31 f1 = 1 000 MHz, f2 = 1 001 MHz 21 dBm Output 3rd Order Intercept Point 2 OIP 32 f1 = 2 200 MHz, f2 = 2 201 MHz 15.5 2nd Order Intermodulation Distortion IM 2 f1 = 1 000 MHz, f2 = 1 001 MHz, Pout = −5 dBm/tone 37 dBc 2nd Harmonic 2f0 f0 = 1.0 GHz, P out = −15 dBm 57 dBc Data Sheet PU10736EJ01V0DS 4 μPC3239TB

2, 3, 5 OUT GND 100 nH Microstrip Line 1 000 pF C5 1 000 pF 1 000 pF 100 pF Microstrip Line VCC ZS = ZL = 50 Ω The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. COMPONENTS OF TEST CIRCUIT FOR MEASURING

ELECTRICAL CHARACTERISTICS

C1, C2 Chip Capacitor 100 pF C3, C5 Chip Capacitor 1 000 pF C4 Feed-through Capacitor 1 000 pF Note There is a case to show a dimple wave of characte ristic by a chip inductor L1 part in the high frequency area. In that case, please reduce a value of L1. INDUCTOR FOR THE OUTPUT PIN The internal output transistor of this IC, to output medium power. To supply current for output transistor, connect an inductor between the VCC pin (pin 6) and output pin (pin 4). Select inductance, as the value listed above. The inductor has both DC and AC effects. In terms of DC, the inductor biases the out put transistor with minimum voltage drop to output enable high level. In terms of AC, the inductor ma kes output-port impedance higher to get enough gain. In this case, large inductance and Q is suitable (Refer to the following page). CAPACITORS FOR THE VCC, INPUT AND OUTPUT PINS Capacitors of 1 000 pF are recommendable as the bypass capacitor for the V CC pin and the coupling capacitors for the input and output pins. The bypass capacitor connected to the V CC pin is used to minimize ground impedance of V CC pin. So, stable bias can be supplied against VCC fluctuation. The coupling capacitors, connec ted to the input and output pins, are used to cut the DC and minimize RF serial impedance. Their capacitances are therefore selected as lower impedance against a 50 Ω load. The capacitors thus perform as high pass filters, suppressing low frequencies to DC. To obtain a flat gain from 100 MHz upwards, 1 000 pF capacitors are used in the test circuit. In the case of under 10 MHz operation, increase the value of coupling capacitor such as 10 000 pF. Because the coupling capacitors are determined by equation, C = 1/(2 πRfc). Data Sheet PU10736EJ01V0DS 5 μPC3239TB

ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD C3V 3 2 1 4 5 6 Top View Mounting direction C4: Feed-through Capacitor C2L1 (Unit: mm) 1.0 0.3φ 0.6 Notes 1. 30 × 30 × 0.4 mm double sided 35 μ m copper clad polyimide board. 2. Back side: GND pattern 3. Au plated on pattern : Through holes COMPONENT LIST Value Size L1 100 nH 1005 C1, C2 100 pF 1608 C3, C5 1 000 pF 1005 C4 1 000 pF Feed-through Capacitor Data Sheet PU10736EJ01V0DS 6 μPC3239TB

TYPICAL CHARACTERISTICS (TA = +25°C, VCC = Vout = 3.3 V, ZS = ZL = 50 Ω, unless otherwise specified) 0 12 3 4 5 –60 –40 –20 0 20 40 60 80 100 CIRCUIT CURRENT vs. SUPPLY VOLTAGECircuit Current ICC (mA) Supply Voltage VCC (V) No Input Signal CURCUIT CURRENT vs. OPERATING AMBIENT TEMPERATURE Circuit Current ICC (mA) Operating Ambient Temperature TA (°C) Frequency f (GHz) POWER GAIN vs. FREQUENCY Power Gain GP (dB) ISOLATION vs. FREQUENCY Frequency f (GHz) OUTPUT RETURN LOSS vs. FREQUENCY Frequency f (GHz) Output Return Loss RLout (dB) TA = +85°C –40°C +25°C No Input Signal VCC = +3.3 V –10 –15 –20 –25 –30 –35 –40 –45 –50 INPUT RETURN LOSS vs. FREQUENCY Input Return Loss RLin (dB) Frequency f (GHz) VCC = 3.6 V 3.3 V 3.0 V Pin = –30 dBm –10 –15 –20 –25 –30 –35 –40 –45 –50 Pin = –30 dBm VCC = 3.0 V, 3.3 V, 3.6 V Isolation ISL (dB) –10 –15 –20 –25 –30 –35 –40 –45 –50 Pin = –30 dBm VCC = 3.0 V 3.6 V 3.3 V VCC = 3.6 V Pin = –30 dBm 3.3 V3.0 V Remark The graphs indicate nominal characteristics. Data Sheet PU10736EJ01V0DS 7 μPC3239TB

Frequency f (GHz) POWER GAIN vs. FREQUENCY Power Gain GP (dB) Pin = –30 dBm VCC = 3.3 VTA = –40°C +25°C+85°C –10 –15 –20 –25 –30 –35 –40 –45 –50 INPUT RETURN LOSS vs. FREQUENCY Input Return Loss RLin (dB) Frequency f (GHz) Pin = –30 dBm VCC = 3.3 V TA = +85°C +25°C –40°C ISOLATION vs. FREQUENCY Frequency f (GHz) –10 –15 –20 –25 –30 –35 –40 –45 –50 Pin = –30 dBm VCC = 3.3 V Isolation ISL (dB) OUTPUT RETURN LOSS vs. FREQUENCY Frequency f (GHz) Output Return Loss RLout (dB) –10 –15 –20 –25 –30 –35 –40 –45 –50 Pin = –30 dBm VCC = 3.3 V TA = –40°C +25°C +85°C –10 –15 f = 1.0 GHz OUTPUT POWER vs. INPUT POWER Output Power Pout (dBm) Input Power Pin (dBm) VCC = 3.6 V 3.0 V 3.3 V –10 –15 f = 2.2 GHz OUTPUT POWER vs. INPUT POWER Output Power Pout (dBm) Input Power Pin (dBm) VCC = 3.6 V 3.0 V 3.3 V Remark The graphs indicate nominal characteristics. Data Sheet PU10736EJ01V0DS 8 μPC3239TB

–10 –15 f = 1.0 GHz OUTPUT POWER vs. INPUT POWER Output Power Pout (dBm) Input Power Pin (dBm) –10 –15 f = 2.2 GHz OUTPUT POWER vs. INPUT POWER Output Power Pout (dBm) Input Power Pin (dBm) TA = +25°C, +85°C –40°C TA = –40°C +25°C +85°C 5.5 5.0 4.5 4.0 3.5 3.0 2.5 Frequency f (GHz) NOISE FIGURE vs. FREQUENCY Noise Figure NF (dB) VCC = 3.0 V, 3.3 V, 3.6 V 5.5 5.0 4.5 4.0 3.5 3.0 2.5 Frequency f (GHz) NOISE FIGURE vs. FREQUENCY Noise Figure NF (dB) TA = +85°C +25°C –40°C Remark The graphs indicate nominal characteristics. Data Sheet PU10736EJ01V0DS 9 μPC3239TB

VCC = 3.3 V f1 = 1 000 MHz f2 = 1 001 MHz –10 –20 –30 –40 –50 –60 –70 –80 –90 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) OIP3 = +20.9 dBm IIP3 = –4.0 dBm Pout IM3 VCC = 3.3 V f1 = 2 200 MHz f2 = 2 201 MHz –10 –20 –30 –40 –50 –60 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) OIP3 = +15.8 dBm IIP3 = –9.8 dBm Pout IM3 VCC = 3.6 V f1 = 1 000 MHz f2 = 1 001 MHz –10 –20 –30 –40 –50 –60 –70 –80 –90 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) Pout IM3 VCC = 3.6 V f1 = 2 200 MHz f2 = 2 201 MHz –10 –20 –30 –40 –50 –60 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) Pout IM3 VCC = 3.0 V f1 = 1 000 MHz f2 = 1 001 MHz –10 –20 –30 –40 –50 –60 –70 –80 –90 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) Pout IM3 VCC = 3.0 V f1 = 2 200 MHz f2 = 2 201 MHz –10 –20 –30 –40 –50 –60 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) Remark The graphs indicate nominal characteristics. Data Sheet PU10736EJ01V0DS 10 μPC3239TB

–10 –20 –30 –40 –50 –60 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) Pout IM3 –10 –20 –30 –40 –50 –60 –70 –80 –90 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) Pout IM3 –10 –20 –30 –40 –50 –60 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) Pout IM3 VCC = 3.0 V TA = –40°C f1 = 1 000 MHz f2 = 1 001 MHz –10 –20 –30 –40 –50 –60 –70 –80 –90 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) Pout IM3 –10 –20 –30 –40 –50 –60 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) VCC = 3.0 V TA = –40°C f1 = 2 200 MHz f2 = 2 201 MHz Pout IM3 –10 –20 –30 –40 –50 –60 –70 –80 –90 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) VCC = 3.3 V TA = –40°C f1 = 1 000 MHz f2 = 1 001 MHz VCC = 3.3 V TA = –40°C f1 = 2 200 MHz f2 = 2 201 MHz VCC = 3.6 V TA = –40°C f1 = 1 000 MHz f2 = 1 001 MHz VCC = 3.6 V TA = –40°C f1 = 2 200 MHz f2 = 2 201 MHz Remark The graphs indicate nominal characteristics. Data Sheet PU10736EJ01V0DS 11 μPC3239TB

–10 –20 –30 –40 –50 –60 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) Pout IM3 –10 –20 –30 –40 –50 –60 –70 –80 –90 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) Pout IM3 –10 –20 –30 –40 –50 –60 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) Pout IM3 VCC = 3.0 V TA = +85°C f1 = 1 000 MHz f2 = 1 001 MHz –10 –20 –30 –40 –50 –60 –70 –80 –90 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) Pout IM3 –10 –20 –30 –40 –50 –60 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) VCC = 3.0 V TA = +85°C f1 = 2 200 MHz f2 = 2 201 MHz Pout IM3 –10 –20 –30 –40 –50 –60 –70 –80 –90 OUTPUT POWER, IM3 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 3rd Order Intermodulation Distortion IM3 (1 tone) (dBm) Input Power Pin (1 tone) (dBm) VCC = 3.3 V TA = +85°C f1 = 1 000 MHz f2 = 1 001 MHz VCC = 3.3 V TA = +85°C f1 = 2 200 MHz f2 = 2 201 MHz VCC = 3.6 V TA = +85°C f1 = 1 000 MHz f2 = 1 001 MHz VCC = 3.6 V TA = +85°C f1 = 2 200 MHz f2 = 2 201 MHz Remark The graphs indicate nominal characteristics. Data Sheet PU10736EJ01V0DS 12 μPC3239TB

VCC = 3.0 V f1 = 1 000 MHz f2 = 1 001 MHz –10 –20 –30 –40 –50 –60 OUTPUT POWER, IM2 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 2nd Order Intermodulation Distortion IM2 (2 tone) (dBm) Input Power Pin (1 tone) (dBm) VCC = 3.0 V f1 = 1 000 MHz f2 = 1 001 MHz IM2 vs. INPUT POWER 2nd Order Intermodulation Distortion IM2 (dBc) Input Power Pin (1 tone) (dBm) Pout IM2 VCC = 3.3 V f1 = 1 000 MHz f2 = 1 001 MHz –10 –20 –30 –40 –50 –60 OUTPUT POWER, IM2 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 2nd Order Intermodulation Distortion IM2 (2 tone) (dBm) Input Power Pin (1 tone) (dBm) VCC = 3.3 V f1 = 1 000 MHz f2 = 1 001 MHz IM2 vs. INPUT POWER 2nd Order Intermodulation Distortion IM2 (dBc) Input Power Pin (1 tone) (dBm) Pout IM2 VCC = 3.6 V f1 = 1 000 MHz f2 = 1 001 MHz –10 –20 –30 –40 –50 –60 OUTPUT POWER, IM2 vs. INPUT POWER Output Power Pout (1 tone) (dBm) 2nd Order Intermodulation Distortion IM2 (2 tone) (dBm) Input Power Pin (1 tone) (dBm) VCC = 3.6 V f1 = 1 000 MHz f2 = 1 001 MHz IM2 vs. INPUT POWER 2nd Order Intermodulation Distortion IM2 (dBc) Input Power Pin (1 tone) (dBm) Remark The graphs indicate nominal characteristics. Data Sheet PU10736EJ01V0DS 13 μPC3239TB

VCC = 3.0 V f = 1 000 MHz –10 –20 –30 –40 –50 –60 –70 –80 OUTPUT POWER, 2f0 vs. INPUT POWER Output Power Pout (dBm) 2nd Harmonics 2f0 (dBm) Input Power Pin (dBm) Pout 2f0 VCC = 3.3 V f = 1 000 MHz –10 –20 –30 –40 –50 –60 –70 –80 OUTPUT POWER, 2f0 vs. INPUT POWER Output Power Pout (dBm) 2nd Harmonics 2f0 (dBm) Input Power Pin (dBm) Pout 2f0 VCC = 3.6 V f = 1 000 MHz –10 –20 –30 –40 –50 –60 –70 –80 OUTPUT POWER, 2f0 vs. INPUT POWER Output Power Pout (dBm) 2nd Harmonics 2f0 (dBm) Input Power Pin (dBm) 10.0 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 K FACTOR vs. FREQUENCY Frequency f (GHz) K Factor K VCC = 3.0 V, 3.3 V, 3.6 V Pin = –30 dBm VCC =3.3 V K (1.0 GHz) =1.44 K (2.2 GHz) =1.32 VCC =3.6 V K (1.0 GHz) =1.51 K (2.2 GHz) =1.41 VCC =3.0 V K (1.0 GHz) =1.59 K (2.2 GHz) =1.54 Remark The graphs indicate nominal characteristics. Data Sheet PU10736EJ01V0DS 14 μPC3239TB

S-PARAMETERS (TA = +25°C, VCC = Vout = 3.3 V, Pin = −30 dBm) S11−FREQUENCY START : 100 MHz STOP : 4 100 MHz 1 : 1 000 MHz 52.77 Ω –0.45 Ω 2 : 2 200 MHz 42.78 Ω 16.42 Ω S22−FREQUENCY START : 100 MHz STOP : 4 100 MHz 1 : 1 000 MHz 50.90 Ω –1.18 Ω 2 : 2 200 MHz 49.58 Ω 5.15 Ω Remarks 1. Measured on the test circ uit of evaluation board. 2. The graphs indicate nominal characteristics. Data Sheet PU10736EJ01V0DS 15 μPC3239TB

S-parameters and noise parameters are provided on our Web site in a format (S2P) that enables the direct import of the parameters to microwave circuit simulators without the need for keyboard inputs. Click here to download S-parameters. [RF and Microwave] → [Device Parameters] URL http://www.necel.com/microwave/en/ Data Sheet PU10736EJ01V0DS 16 μPC3239TB

6-PIN SUPER MINIMOLD (UNIT: mm) 0.9±0.1 0.7 0 to 0.1 0.15+0.1 –0.05 0.2+0.1 –0.05 2.0+0.15 –0.20 1.3 0.650.65 1.25±0.1 2.1±0.1 0.1 MIN. Data Sheet PU10736EJ01V0DS 17 μPC3239TB

(1) Observe precautions for handling because of electro-static sensitive devices. (2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent undesired oscillation). All the ground terminals must be connected together with wide ground pattern to decrease impedance difference. (3) The bypass capacitor should be attached to the VCC line. (4) The inductor (L) must be attached between VCC and output pins. The inductance value should be determined in accordance with desired frequency. (5) The DC cut capacitor must be attached to input and output pin. RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Soldering Conditions Condition Symbol Infrared Reflow Peak temperature (package surface temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Time at temperature of 220°C or higher : 60 seconds or less Preheating time at 120 to 180°C : 120±30 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below IR260 Wave Soldering Peak temperature (molten solder temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Preheating temperature (package surface temperature) : 120 °C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below WS260 Partial Heating Peak temperature (terminal temperature) : 350°C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below HS350 Caution Do not use different soldering met hods together (except for partial heating). Data Sheet PU10736EJ01V0DS 18 μPC3239TB

The information in this document is current as of October, 2008. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer- designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) M8E 02. 11-1 (1) (2) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "Standard": "Special": "Specific": μPC3239TB